summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-22ipa: raspberrypi: Fix permissions on imx477_scientific.jsonLaurent Pinchart
The imx477_scientific.json file was added to the source tree with incorrect executable permission. Fix it. Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-22libcamera: camera_sensor: Add AR0521 sensor propertiesJacopo Mondi
Add an entry to the sensor properties for OnSemi AR0521. The chip manual list one additional test pattern "PN9 Link integrity test pattern" not supported by the mainline Linux driver. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-22ipa: camera_sensor_helper: Add AR0521 supportJacopo Mondi
Add support for OnSemi AR0521 5Mpx image sensor to libipa. The sensor analogue gain is implemented as a coarse and a fine factor, with the coarse gain being a power of two and the fine gain being a value in the [1.0, 2.0[ range. The mapping between gain codes and gain values is tabulated in the datasheet, and the table values are very close but not identical to the mathematical model. Compute the gain using the model to keep the code shorter, if this causes precision issues the calculation could be replaced with a table. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-20libcamera v0.0.3v0.0.3Kieran Bingham
Key bug fixes: * Segfault in the ContolInfo() constructor for an empty V4L2 menu Bug: https://bugs.libcamera.org/show_bug.cgi?id=167 Fix: libcamera: v4l2_device: Workaround faulty control menus This resolves and prevents crashes that have occured in Pipewire when users connect poorly implemented UVC devices. ABI Compliance: abi-compliance-checker reports 100% ABI and API compatibility with with v0.0.2, however 81e7689bb168 ("libcamera: stream: Turn StreamRole into scoped enumeration") modifies an enum into a class enum. This may need minor updates to applications, and didn't appear to be picked up by abi-compliance-checker. - See https://git.libcamera.org/libcamera/libcamera.git/commit/?id=81e7689bb168a for more details. Highlights: Core: * Fix tracing when built as a subproject * Avoid double map lookups in framebuffer_allocator * Workaround faulty control menus * controls: Change LensPosition units to dioptres * camera_sensor: Add IMX519 sensor properties * Documentation: contributing: Add commit message guidelines * Declare generic converter interface utils: * Add libtuning * Add initial libtuning script support for rkisp1 and raspberrypi. * checkstyle.py: Check new header file on new and renamed meson.build files ipa: * Move IPA sensor controls validation to CameraSensor (IPU3/RKISP1) rkisp1: * Support FrameDurationLimits control for FrameRate management * Support raw capture (IPA, configuration, and runtime) * Add support for manual gain and exposure * Fix stream size validation * Add additional default values to controls imx8-isi: * Enumerate supported stream formats * Set SensorTimestamp metadata Raspberry Pi: * Remove generic "pause" mechanism from Algorithm - Remove enum BuffferMask from the mojom interface - Fix digital gain calculations for manual mode - Fix bug in IPA frame drop logic - imx477: Update tuning file for the latest camera modules - Add a "scientific" tuning for the IMX477 Apps: - cam: kms: Avoid 'unused-parameter' warnings - cam: Support parsing array controls in capture scripts - gstreamer: Improve control id lookups - lc-compliance: simple_capture: Free Requests properly python: - Support controls that use an array of Rectangles - Expose the Request Sequence Number in Python Bindings test: - Validate CameraSensor Ancillary Devices (focusLens) - controls: control_info: Test default def() values Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-19Expose the Request Sequence Number in Python BindingsMatthew Goodman
The python bindings are missing the ability to read the sequence number of the Request object from the public API. Expose the objects sequence number on the pybind11 surfaces to support applications reading this value. Signed-off-by: Matthew Goodman <matt@exclosure.io> [Kieran: Revised commit message] Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-19ipa: raspberrypi: Add a "scientific" tuning for the IMX477Naushir Patuck
Add a tuning file for the IMX477 more suited to scientific applications. The key differences from the original tuning file are: - Disable ALSC block completely - Pure rec709 gamma curve, and no contrast enhance - New CT curve and CCMs based on the illumination spectrum of a black body radiator up to about 3600 K and the CIE illuminant D for higher color temperatures. Further details on the changes can be found at: https://forums.raspberrypi.com/viewtopic.php?t=343449 All credit for these changes go to Dr. Rolf Henkel. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-16test: controls: control_info: Test default def() valuesLaurent Pinchart
Extend the ControlInfo test to verify the behaviour of the default 'def' argument to the ControlInfo constructor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-16libcamera: Add todo comment in meson.build about switch to dependency('dl')Laurent Pinchart
The dlopen() & co. functions are provided by libdl on some systems, and but the C library on others. Starting from version 0.62.0, meson handles this behind the scenes when using dependency('dl'). Add a todo comment to remember we should replace the manual implementation with a dependency() call when updating to meson 0.62.0 or newer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-15utils: checkstyle.py: Check new header file on new and renamed meson.build filesXavier Roumegue
Declaration of new header file to the build system are only checked against modified meson.build file. Therefore, this raises a false positive warning in case the meson.build is added or renamed. Add the new and renamed meson.build files to the list of files to check header file inclusion. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-14libcamera: pipeline: simple: converter: Use generic converter interfaceXavier Roumegue
Move the simple converter implementation to a generic V4L2 M2M class derived from the converter interface. This latter could be used by other pipeline implementations and as base class for customized V4L2 M2M converters. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-14libcamera: Declare generic converter interfaceXavier Roumegue
Declare a converter Abstract Base Class intended to provide generic interfaces to hardware offering size and format conversion services on streams. This is mainly based on the public interfaces of the current converter class implementation found in the simple pipeline handler. The main change is the introduction of loadConfiguration() function which can be used by the concrete implementation to load hardware specific runtime parameters defined by the application. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-12Documentation: contributing: Add commit message guidelinesLaurent Pinchart
All developers, whether junior or experienced, can benefit from improving their commit message writing skills. Add a paragraph to the contribution documentation to explain this, with a link to a good guide. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-12-12libcamera: camera_sensor: Rectify test patterns listed for IMX519Umang Jain
The IMX519 driver reports ColorBars and ColorBarsFadeToGray but upon inspecting the test pattern modes via v4l2-ctl utility, these test patterns do not comply with MIPI CCS v1.1 (Section 10.1). Hence, omit from camera-sensor-properties database for now and add a comment for the same. Fixes: e3b26b4c4eb2 ("libcamera: camera_sensor: Add IMX519 sensor properties") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09libcamera: camera_sensor: Add IMX519 sensor propertiesUmang Jain
Add an entry for Arducam IMX519 sensor which has 1220x1220 pixel size and supports four test pattern modes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09ipa: rkisp1: Add additional default values to controlsRobert Mader
To make things easier for consumers. Related: https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1450 Signed-off-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09lc-compliance: simple_capture: Free Requests properlyPaul Elder
In the simple capture tests, in the capture functions, the Requests were auto-deallocated by the function going out of scope after the test completed. However, before the end of the scope, the Framebuffers that the Requests referred to were manually freed. Thus when the Requests were deallocated, they tried to cancel their Framebuffers, which involve setting the status to cancelled, which obviously causes a segfault because the Framebuffers had already been freed. Fix this by moving the list of Requests to a member variable and deallocating them before deallocating the Framebuffers at stop() time. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09py: Support controls that use an array of RectanglesDavid Plowman
The Python bindings will now accept, or return, a list or tuple of libcamera.Rectangle objects for such controls. This had previously been omitted, but now we have, for example, the AfWindows control which requires this feature. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-08libcamera: controls: Change LensPosition units to dioptresDavid Plowman
The units for the LensPosition control, previously defined as being in units of 1 / hyperfocal_distance, are changed to 1 / distance (in metres). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-07android: Fix missing space in error messageJacopo Mondi
Add whitespace to correct the error message. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-11-30ipa: raspberrypi: imx477: Update tuning file for the latest camera modulesDavid Plowman
The latest camera modules have a very slightly different IR filter, so the tuning file is slightly revised to give best results with both old and new camera modules. The original tuning file is retained as imx477_v1.json in case anyone should wish to continue using it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: Fix bug in IPA frame drop logicNaushir Patuck
Fix a bug in the IPA frame dropping (for rate control) logic, where the metadata for the current context was copied from itself (i.e. a no-op), instead of being copied from the previous context. This bug does not occur in normal conditions, only when running with a low exposure time and unconstrained framerate, which happens in a particular picamera2 test. Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: ipa: raspberrypi: Use IPA cookiesNaushir Patuck
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to the pipeline handler through the setDelayedControls signal. This cookie is used to index the RPiController::Metadata object to be used for the frame. The IPA cookie is then returned from DelayedControls when the frame with the applied controls has been returned from the sensor, and eventually passed back to the IPA from the signalIspPrepare signal. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Use an array of RPiController::Metadata objectsNaushir Patuck
Allow the IPA to cycle through an array of RPiController::Metadata objects, one per prepare()/process() invocation, when running the controller algorithms. This allows historical metadata objects to be retained, and subsequently passed into the controller algorithms on future frames. At present, only a single index into this array is used. This change provides a route to fixing a problem with the AGC algorithm, where if a manual shutter/gain is requested, the algorithm does not currently retain any context of the total exposure that it has calculated. As a result, the wrong digital gain would be applied when the frame with the manual shutter/gain is processed by the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Add RPiController::Metadata::mergeCopyNaushir Patuck
Add a new member function to RPiController::Metadata that copies unique key/value pairs from one object to the other. This is different from std::map::merge that would remove the key/value pairs from the source object. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: delayed_controls: Add user cookie to DelayedControlsNaushir Patuck
Allow the caller to provide a cookie value to DelayedControls::reset and DelayedControls::push. This cookie value is returned from DelayedControls::get for the frame that has the control values applied to it. The cookie value is useful in tracking when a set of controls has been applied to a frame. In a subsequent commit, it will be used by the Raspberry Pi IPA to track the IPA context used when setting the control values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: delayed_controls: Template the ControlRingBuffer classNaushir Patuck
Convert ControlRingBuffer to a templated class to allow arbitrary ring buffer array types to be defined. Rename ControlRingBuffer to RingBuffer to indicate this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: Switch to RPi::DelayedControlsNaushir Patuck
Switch the Raspberry Pi pipeline handler to use the DelayedControls implementation in the RPi:: namespace. This will allow us to use Raspberry Pi specific API changes in future commits. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: Fork DelayedControlsNaushir Patuck
Fork the libcamera::DelayedControls implementation in the RPi:: namespace, with the intention of updating the API for Raspberry Pi specific features. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-28libcamera: v4l2_device: Workaround faulty control menusKieran Bingham
Some UVC cameras have been identified that can provide V4L2 menu controls without any menu items. This leads to a segfault where we try to construct a ControlInfo(Span<>,default) with an empty span. Convert the v4l2ControlInfo and v4l2MenuControlInfo helper functions to return std::optional<ControlInfo> to be able to account in the caller if the control is valid, and only add acceptable controls to the supported control list. Menu controls without a list of menu items are no longer added as a valid control and a warning is logged. This also fixes a potential crash that would have occured in the unlikely event that a ctrl.minimum was set to less than 0. Bug: https://bugs.libcamera.org/show_bug.cgi?id=167 Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-28libcamera: framebuffer_allocator: Avoid double map lookupBarnabás Pőcze
Use `try_emplace()` on the map instead of `count()` and `operator[]` to avoid walking the tree twice. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25cam: capture_script: Support parsing array controlsJacopo Mondi
Add support for parsing array controls to the cam capture script. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-25pipeline: rkisp1: Support raw Bayer capture configurationFlorian Sylvestre
Implement support for raw Bayer capture during configuration generation, validation and camera configuration. While at it, fix a typo in a comment. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Support raw Bayer capture at runtimeFlorian Sylvestre
Implement support for raw Bayer capture at runtime, from start() to stop(). Support of raw formats in the camera configuration is split to a subsequent change to ease review. In raw mode, the ISP is bypassed. There is no need to provide parameter buffers, and the ISP will not generate statistics. This requires multiple changes in the buffer handling: - The params and stats buffers don't need to be allocated, and the corresponding video nodes don't need to be started or stopped. - The IPA module fillParamsBuffer() operation must not be called in queueRequestDevice(). As a result, the IPA module thus doesn't emit the paramsBufferReady signal. The main and self path video buffers must thus be queued directly in queueRequestDevice(). - The tryCompleteRequest() function must not to wait until the params buffer has been dequeued. - When the frame buffer has been captured, the IPA module processStatsBuffer() operation must be called directly to fill request metadata. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Fix stream size validationLaurent Pinchart
Unlike RkISP1Path::generateConfiguration(), the validate() function doesn't take the camera sensor resolution into account but only considers the absolute minimum and maximum sizes supported by the ISP to validate the stream size. Fix it by using the same logic as when generating the configuration. Instead of passing the sensor resolution to the validate() function, pass the CameraSensor pointer to prepare for subsequent changes that will require access to more camera sensor data. While at it, update the generateConfiguration() function similarly for the same reason. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Query the driver for formatsPaul Elder
Query the driver for the output formats and sizes that it supports, instead of hardcoding them. This allows future-proofing for formats that are supported by some but not all versions of the driver. As the rkisp1 driver currently does not support VIDIOC_ENUM_FRAMESIZES, fallback to the hardcoded list of supported formats and framesizes. This feature will be added to the driver in parallel, though we cannot guarantee that users will have a new enough kernel for it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25ipa: rkisp1: agc: Support raw captureLaurent Pinchart
Support raw capture by allowing manual control of the exposure time and analogue gain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25ipa: rkisp1: Add support for manual gain and exposurePaul Elder
Add support for manual gain and exposure in the rkisp1 IPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-11-25ipa: rkisp1: Support raw capture in IPA operationsLaurent Pinchart
The RkISP1 can capture raw frames by bypassing the ISP. In that mode, the ISP will not produce statistics nor consume parameters. Most algorithms will thus be unable to run, with one exception: the AGC will still be able to configure the sensor exposure time and analog gain in manual mode. To prepare for this, add the ability to disable algorithms for the duration of the capture session based on the camera configuration. Individual algorithms report whether they support raw formats at construction time, and the IPA module disables algorithms in configure() based on the stream configurations. Disabled algorithms are skipped during the capture session in the processStatsBuffer() operation. As the ISP doesn't produce statistics, don't try to access the stats buffer. There is no need for similar logic in fillParamsBuffer() as that operation won't be called for raw capture. All algorithms report not supporting raw capture by default. Raw support in AGC will be added separately. The feature is implemented in the RkISP1 module without any support from libipa at this point to avoid designing a generic API based on a single user. This may be changed in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25libcamera: stream: Turn StreamRole into scoped enumerationLaurent Pinchart
The StreamRole enum has enumerators such as 'Raw' that are too generic to be in the global libcamera namespace. Turn it into a scoped enum to avoid namespace clashes, and update users accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25libcamera: stream: Add operator<<() to print StreamRole as a stringLaurent Pinchart
libcamera prints stream role values in log messages. To be more user-friendly, add a specialization of operator<<() to print the role name as a string instead of a numerical value. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25utils: tuning: Add tuning script for rkisp1Paul Elder
Add a tuning script for rkisp1 that uses libtuning. So far it only supports LSC. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: tuning: Add alsc-only libtuning raspberrypi tuning scriptPaul Elder
Add a tuning script for raspberrypi for alsc only, that uses libtuning. Since there will also be a tuning script for raspberrypi that has more modules, put the libtuning alsc module definition in a separate file so that it can be reused later. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: generators: Add yaml outputPaul Elder
Add a generator to libtuning for writing tuning output to a yaml file. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: parsers: Add yaml parserPaul Elder
Add a parser to libtuning for parsing configuration files in yaml format. At the moment it doesn't parse anything and simply returns an empty config. This is fine for the time being, as the only user of it is the rkisp1 tuning script, which only has an LSC module which doesn't consume anything from the configuration file. When a module comes around that requires the yaml parser, it can be implemented then. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: generators: Add raspberrypi outputPaul Elder
Add a generator to libtuning for writing tuning output to a json file formatted the same way that raspberrypi's ctt formats them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: parsers: Add raspberrypi parserPaul Elder
Add a parser to libtuning for parsing configuration files that are the same format as raspberrypi's ctt's configuration files. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: modules: alsc: Add rkisp1 LSC modulePaul Elder
Add an LSC module for RkISP1. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: modules: alsc: Add raspberrypi ALSC modulePaul Elder
Add an ALSC module for Raspberry Pi. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25utils: libtuning: modules: Add base LSC modulePaul Elder
Add a base LSC module to libtuning's collection of modules. It is based on raspberrypi's ctt's ALSC, but customizable for different lens shading table sizes, among other things. It alone is insufficient as a module, but it provides utilities that are useful for and which will simplify implementing LSC modules. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>