summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-19test: Ensure CameraTest tests are not run in parallelKieran Bingham
The fence and mapped-buffer tests both use the VIMC test device and must not be run at the same time. Split these tests to a new group to force their isolation from running in parallel. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-01-19pipeline: raspberrypi: Return all ISP resolutions from generateConfiguration()Naushir Patuck
The libcamerasrc gstreamer component does seem to not allow stream resolutions that are not advertised by PipelineHandler::generateConfiguration(). This has been raised in a bug report [1]. Fix this behavior by advertising a SizeRange from the minimum ISP resolution, up to the sensor resolution from PipelineHandlerRPi::generateConfiguration(). [1] https://bugs.libcamera.org/show_bug.cgi?id=105 Fixes: f16acb275c85 ("pipeline: raspberrypi: Restrict the advertised maximum ISP output resolution") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-19pipeline: raspberrypi: Simplify calculation of sensor's native Bayer orderDavid Plowman
Now that the sensor is defined to list mbus codes using its native (untransformed) Bayer order, the method of obtaining it can be simplified. We don't have to try and reset the flips, we just use the value directly from the sensor. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-19libcamera: camera_sensor: Clear camera flips after opening the deviceDavid Plowman
We clear the V4L2_CID_HFLIP and V4L2_CID_VFLIP controls immediately after opening the camera device. This means the camera's Bayer format and mbus codes will be in the sensor's "native" order, and we document this to be the case so that it can be relied upon. Clearing the flips is harmless where sensor flips do not affect the Bayer order. This also fixes a bug in the Raspberry Pi pipeline handler where the native Bayer order was being computed wrongly, but the new behaviour here will be helpful to other pipeline handlers too. A subsequent commit will tidy up the Raspberry Pi pipeline handler in this area as it can now be simplified. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Fixes: 83a512816189 (pipeline: raspberrypi: Convert the pipeline handler to use media controller) Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-17test: v4l2_compat: Add --verbose argumentLaurent Pinchart
Add a -v/--verbose argument to the v4l2_compat test to print the output of v4l2-compliance, even when the test passes. This can be useful when debugging. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-14v4l2: v4l2_camera_proxy: Use file description in debug messagesLaurent Pinchart
Debug messages in V4L2CameraProxy print the numerical file descriptor, which isn't very human-friendly. Replace it with the V4L2CameraFile description that includes the full path. While at it, refactor the messages to use __func__ instead of manually copying function names. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-14v4l2: v4l2_compat_manager: Store V4L2CameraFile in mmaps_Laurent Pinchart
The mmaps_ map stores a pointer to the V4L2CameraProxy to avoid increasing the reference count on the V4L2CameraFile shared pointer needlessly. While this provides a small optimization, it prevents accessing the V4L2CameraFile from the munmap() function which doesn't take an fd as argument. To prepare for improved debugging that will require access to V4L2CameraFile in munmap(), store the V4L2CameraFile pointer in mmaps_. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-14v4l2: v4l2_camera_proxy: Drop trace message from freeBuffers()Laurent Pinchart
The freeBuffers() function is only called from vidioc_reqbufs(), which already logs a trace message. Remove the duplicate. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-14v4l2: v4l2_camera_file: Store file descriptionLaurent Pinchart
Create a string that describe the file from the path and file descriptor. This will be used in log messages to clearly identify which file an operation is related to. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-14v4l2: v4l2_compat_manager: Print path and fd in openat()Laurent Pinchart
The V4L2 compat layer prints debug messages that mention the file descriptor of the video device, but no message that links the device path to the file descriptor. Fix it by adding a debug message in openat(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-14v4l2: v4l2_camera_proxy: Zero flags in VIDIOC_REQBUFSLaurent Pinchart
The V4L2 compatibility layer doesn't support any of the VIDIOC_REQBUFS flags. They are all correctly ignored, but also need to be zeroed before returning to indicate that they haven't been taken into account. This fixes a v4l2-compliance failure: Buffer ioctls (Input 0): fail: ../../utils/v4l2-compliance/v4l2-test-buffers.cpp(682): coherent test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL Fixes: aa4533639971 ("include: linux: Update kernel headers to version v5.16-rc7") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-01-10pipeline: raspberrypi: Demote the category of a logging messageNaushir Patuck
Switch the "no buffers available" log message from Info to Debug so that it does not get output by default. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-08libcamera: pipeline: raspberrypi: Update sensor's V4L2_CID_NOTIFY_GAINS controlDavid Plowman
If the sensor exposes the V4L2_CID_NOTIFY_GAINS control, assume it means the sensor wants to be told the latest colour gains. We store whether the control exists and if so its default value, to save us checking for it on every frame. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-08libcamera: v4l2_device: Add support for integer array controlsDavid Plowman
V4L2Device::setControl and V4L2Device::updateControl are both updated to handle ControlTypeInteger32 array controls. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-08include: linux: Update kernel headers to version v5.16-rc7David Plowman
Updated kernel headers to v5.16-rc7 using utils/update-kernel-headers.sh and re-instating libcamera local modifications. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-08v4l2: v4l2_camera_proxy: Add EXPBUF as one of the supported ioctlVedant Paranjape
To support DMABUF as one of the memory buffer, we need to implement EXPBUF in the v4l2 compat layer. This patch implements vidioc_expbuf as one of the supported ioctls. Bug: https://bugs.libcamera.org/show_bug.cgi?id=89 Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-06pipeline: raspberrypi: Add support for Video Mux and Bridge devicesNaushir Patuck
This change will allow the pipeline handler to enumerate and control Video Mux or Bridge devices that may be attached between sensors and a particular Unicam instance. Cascaded mux or bridge devices are also handled. A new member function RPiCameraData::enumerateVideoDevices(), called from PipelineHandlerRPi::registerCamera(), is used to identify and open all mux and bridge subdevices present in the sensor -> Unicam link. Relevant links are enabled/disabled and pad formats correctly set in PipelineHandlerRPi::configure() before the camera is started. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-06pipeline: raspberrypi: Move sensor entity detection out of registerCamera()Naushir Patuck
Enumerate the sensor device entities in PipelineHandlerRPi::match() and loop over PipelineHandlerRPi::registerCamera() for each sensor found. This will allow the pipeline handler to register multiple cameras attached to a single Unicam instance with a Video Mux device. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-06libcamera: pkg-config: Do not hardcode versionKieran Bingham
The pkg-config version should not be hardcoded, and it should match the version of the library, ideally with point releases where possible. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-01-03meson: reduce required version to 0.53Christian Rauch
Building the libcamera Android layer currently makes use of features from meson 0.55. The core libcamera framework in the default configuration without android enabled uses the 'summary' feature available in 0.53, and is the lowest supportable meson version if the Android HAL is excluded. Ubuntu 20.04 LTS currently provides meson 0.53 and represents an acceptable minimum version to support. Platforms utilising the Android component will have full control over their build environment and can ensure that they provide a more recent version of meson. Reduce the supported meson version for the project to 0.53 to facilitate building on more distributions without having to manually update the meson package. Meson will output a warning that features not available in 0.53 are used if the Android HAL is enabled. This is considered as an acceptable middleground to improve the experience on the latest Ubuntu LTS, until 22.04 LTS is released and provides a newer meson version. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> [Kieran: Add comment about the android meson requirements] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-01-03libcamera: pipeline_handler: Make lock() and unlock() thread-safeLaurent Pinchart
The PipelineHandler lock() and unlock() functions are documented as thread-safe, but they're not. Fix them using a mutex. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-01-03libcamera: media_device: Move recursive lock handling to pipeline handlerLaurent Pinchart
The MediaDevice lock is meant to prevent concurrent usage of multiple cameras from the same pipeline handlers. As media devices are acquired by pipeline handlers, we can't have multiple pipeline handlers trying to lock the same media device. The recursive locking detection can thus be moved to the pipeline handler. This simplifies the media device implementation that now implements true lock semantics, and prepares for support of concurrent camera usage. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-01-03libcamera: controls: Use ASSERT() instead of assert()Laurent Pinchart
The ASSERT() macro integrates with the logging infrastructure, use it to replace assert(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-01-03utils: update-kernel-headers: Update path to intel-ipu3.hLaurent Pinchart
The intel-ipu3.h header has moved in the v5.14 kernel. Update the kernel headers update script accordingly. While at it, add a missing directory separator to fix a failure when the path to the kernel tree doesn't end with a /. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-12-29Documentation: guides: introduction: Fix typosEugen Hristev via libcamera-devel
Fix typos. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-29libcamera: pipeline: simple: Rename Entity::link to sourceLinkLaurent Pinchart
The Entity::link member has an ambiguous name. Rename it to sourceLink to clarify that it stores the link on the source pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-27README: Convert tabs to spacesJohann Koenig
The initial commit a146cdbf20cb ("readme: Provide build requirements") used tabs for all the dependencies. The first time a line was edited in commit 2de78434ca71 ("meson: Bump required version to 0.47") tabs were not kept. This makes them all consistent. Signed-off-by: Johann Koenig <johannkoenig@google.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-22android: Increase result metadata sizePaul Elder
Increase the initial size of the result metadata, as we will be adding more entries in the near future. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-22android: camera_capabilities: Fix the type of the capability vectorPaul Elder
The type of elements of the capability vector that is set in the static metadata must be uint8_t. The enum will not suffice, as it is int32_t. Fix this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-22android: camera_metadata: Add setEntry helperPaul Elder
Add setEntry() helper, that automatically detects if updateEntry() or addEntry() should be used. Note that updateEntry() will fail if the entry was not yet added, and addEntry() will fail is the entry was already added. They are silent failures that cause unexpected values to find their way into the android metadata instance. Previously this helper was not necessary, as (with respect to the current use case) the preview template generator would always add a key so the other template generators that used the preview template as boilerplate could reliably use updateEntry(). The preview template generator will soon decide based on capabilities whether or not to add keys, so the other template generators need a helper to decide whether to use updateEntry() or addEntry(). For now only implement it for enums and arithmetic values, as they will mainly be used in populating templates. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-22android: camera_capabilities: Set read sensor settings capabilityPaul Elder
A libcamera camera that supports the manual sensor capability also satisfies all the requirements for the read sensor settings capability. Set it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-22android: camera_capabilities: Add messages for lack of FULL supportPaul Elder
Print messages when some feature is missing that causes hardware level FULL to not be supported. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-14utils: tracepoints: gen-tp-header: Add execute permissionBrian Olson
The gen-tp-header script does not have execute permissions set on the file. Add the execute permission to ensure that meson runs this script consistently in the same configuration as other scripts, without invoking python itself separately. Signed-off-by: Brian Olson <icic@bolson.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-12-14libcamera: Restrict .gitignore build/ and patches/ to the root directoryLaurent Pinchart
The build/ and patches/ directories are listed in .gitignore as they're commonly used respectively as the meson build directory (this is the directory name used in README.rst) and as a local patches store (this usage pattern isn't official though, and may need to be reconsidered if not used anymore). As those two directories are supposed to be at the root of the source tree, restrict the corresponding .gitignore patterns to avoid matching other locations. While at it, sort the entries alphabetically, with the absolute path entries separate from the entries that match any location within the source tree. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-12-13test: fence: Signal fence onceJacopo Mondi
The unit test associates a fence with a framebuffer and makes sure the fence is correctly signalled. Once a fence is correctly signalled, it is released by the core, and the underlying file descriptor closed. The unit test however tries to write on the fence file descriptor every time the designated Request is queued, an error which is now visible as the return value of the fence signalling write() is checked. Fix that by associating a fence with a framebuffer only once. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-12-13test: fence: Check write return valueJacopo Mondi
The ::write() function used to signal a framebuffer fence in the unit test is marked with the 'warn_unused_result'. When building in debugoptimized mode not checking for the return value causes issues at build time: /test/fence.cpp:254:2: error: ignoring return value of function declared with 'warn_unused_result' attribute Fix that by checking the ::write() return value and emitting an error message in case the write fails. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reported-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-12-13libcamera: pipeline: raspberrypi: Support color spacesDavid Plowman
The Raspberry Pi pipeline handler now sets color spaces correctly. In generateConfiguration() it sets them to reasonable default values based on the stream role. validate() now calls validateColorSpaces() to ensure that the requested color spaces are sensible, before proceeding to check what the hardware can deliver. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: camera: Add validateColorSpaces to CameraConfiguration classDavid Plowman
This function forces raw streams to have the "raw" color space, and also optionally makes all non-raw output streams to share the same color space as some platforms may require this. When sharing color spaces we take the shared value to be the one from the largest of these streams. This choice is ultimately arbitrary, but can be appropriate if smaller output streams are used for image analysis rather than human consumption, when the precise colours may be less important. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: v4l2_subdevice: Support passing ColorSpaces to V4L2 subdevicesDavid Plowman
The ColorSpace from the StreamConfiguration is now handled appropriately in the V4L2Subdevice. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: v4l2_subdevice: Add colorSpace field to V4L2SubdeviceFormatDavid Plowman
This adds a ColorSpace field to the V4L2SubdeviceFormat so that we can set and request particular color spaces from V4L2. This commit simply adds the field and fixes some occurrences of brace initializers that would otherwise be broken. A subsequent commit will pass and retrieve the value correctly to/from V4l2 itself. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: video_device: Support passing ColorSpaces to V4L2 video devicesDavid Plowman
The ColorSpace from the StreamConfiguration is now handled appropriately in the V4L2VideoDevice. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: video_device: Convert between ColorSpace class and V4L2 formatsDavid Plowman
Add functions to the V4L2Device class to convert to and from libcamera ColorSpace. These functions are added to the base V4L2Device class so that they can be shared both by the video device class and subdevices. With the ColorSpace class, the color space and related other fields are stored together, corresponding to a number of fields in the various different V4L2 format structures. Template functions are therefore a convenient implementation, and we must explicitly instantiate the templates that will be needed. Note that unset color spaces are converted to requests for the device's "default" color space. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: stream: Add ColorSpace fields to StreamConfigurationDavid Plowman
This is so that applications can choose appropriate color spaces which will then be passed down to the V4L2 devices. The ColorSpace field is actually optional. If it is not set you will get the camera's default color space. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-13libcamera: Add ColorSpace classDavid Plowman
This class represents a color space by defining its color primaries, the transfer (gamma) function it uses, the YCbCr encoding and whether the output is full or limited range. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11android: Remove CameraWorkerJacopo Mondi
The CameraWorker class purpose was to handle acquire fences for incoming capture requests directed to libcamera. Now that fences are handled by the core library, it is not required to handle them in the HAL and the CameraWorker and CaptureRequest classes can be dropped. Update the core in CameraDevice class accordingly to queue Requests directly to the libcamera::Camera and set the release_fence to the value of the FrameBuffer::fence() for streams of type ::Direct. While at it make CameraRequest::StreamBuffer::fence a UniqueFD to ease the management of the fences file descriptor values. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11test: fence: Add test for the Fence classJacopo Mondi
Add a test for the Fence class by testing a Fence failure case, and by testing a successfully signalled fence capture cycle. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11libcamera: pipeline_handler: Prepare RequestJacopo Mondi
Before queueing a request to the device, any synchronization fence from the Request framebuffers has to be waited on. Connect the Request::Private::prepared signal to the function that queues requests to the hardware and call Request::Private::prepare(). When the waiting request queue is inspected, verify if it has completed its preparation phase and queue it to the device. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11libcamera: request: Add Request::Private::prepare()Jacopo Mondi
Add a prepare() function to the Private Request representation. The prepare() function is used by the PipelineHandler class to prepare a Request to be queued to the hardware. The current implementation of prepare() handles the fences associated with the Framebuffers part of a Request. The function starts an event notifier for each of those and emits the Request::prepared signal when all fences have been signalled or an optional timeout has expired. The optional timeout allows to interrupt blocked waits and notify the Request as failed so that it can be cancelled. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11libcamera: pipeline: Introduce stopDevice()Jacopo Mondi
Since a queue of waiting Requests has been introduced, not all Requests queued to the PipelineHandler are immediately queued to the device. As a Camera can be stopped at any time, it is required to complete the waiting requests after the ones queued to the device had been completed. Introduce a pure virtual PipelineHandler::stopDevice() function to be implemented by pipeline handlers and make the PipelineHandler::stop() function call it before completing pending requests. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-12-11libcamera: pipeline_handler: Split request queueingJacopo Mondi
In order to prepare to handle synchronization fences at Request queueing time, split the PipelineHandler::queueRequest() function in two, by creating a list of waiting requests and introducing the doQueueRequest() function that queues requests to the device in the order the pipeline has received them. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>