| Age | Commit message (Collapse) | Author |
|---|
|
Since we have moved away from switch/case on the operation ID,
there's little reason to split the operation in two functions.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAIPU3 interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of actions to signals are:
ActionSetSensorControls => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadataReady => metadataReady
The translated naming scheme of events to dedicated functions are:
EventProcessControls => queueRequest()
EventStatReady => processStatsBuffer()
EventFillParams => fillParamsBuffer()
The dedicated functions are called from pipeline-handler to the IPA
using IPC. These functions run asynchronously and when completed,
the IPA emits the respective signals as stated above in the translated
naming scheme.
The EventProcessControls is translated to queueRequest() to bring
symmetry to the IPU3 interface with other IPA interfaces.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The V4L2VideoDeviceTest class configures the capture pipeline with
parameters that are partly hardcoded, and partly come from the current
configuration of the device. In particular, with the vimc pipeline, the
sensor subdevice is configured with the size retrieved from the capture
video node, and the video node is then reconfigured to 640x480.
Relying on the current (and thus possibly random) device configuration
can lead to broken pipes when starting streaming. This currently causes
failures of the dequeue_watchdog test when run after the formats test.
Fix it by explicitly setting the same size for both the vimc subdevs and
the video capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the streamOn() call fails, there is no way the test will then
succeed. Catch it and return a failure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Failing a test without an error message makes it difficult to debug
issues. Add a message when buffer allocation fails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Initialise the watchdogDuration_ member to 0ms before it is used
in rest of the code base. Failing to do so, spews out log warnings
regarding dequeue timer being expired.
Fixes: 16f3d2de50ff ("libcamera: v4l2_videodevice: Add a dequeue timer")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Duration class is missing the equivalent to the
std::chrono::duration constructor that takes a number of ticks expressed
as a scalar. Fix it, which allows initializing a Duration instance to 0
or 0.0.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The sizes() function returns a value, not a reference. There's no need
for it to be const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Is/ingore/ignore/ and s/prevetn/prevent/
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test that captures 5 frames, with a short (5ms) watchdog.
The default framerate of the VIMC pipeline should ensure that
we never meet this watchdog, and the timeout should activate.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Enable the V4L2VideoDevice dequeue timeout for the Unicam Image node, and
connect the timeout signal to a slot in the pipeline handler. This slot will
log an error message informing the user of a possible hardware stall.
The timeout is calculated as 2x the maximum frame length possible for a given
mode, returned by the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a timer that gets reset on every buffer dequeue event. If the timeout
expires, optionally call a slot in the pipeline handler to handle this
condition. This may be useful in detecting and handling stalls in either the
hardware or device driver.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Under the right circumstances, the alsc calculations could spread the colour
errors across the entire image as lambda remains unbound. This would cause the
corrected image chroma values to slowly drift to incorrect values.
This change adds a config parameter (alsc.lambda_bound) that provides an upper
and lower bound to the lambda value at every stage of the calculation. With this
change, we now adjust the lambda values so that the average across the entire
grid is 1 instead of normalising to the minimum value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
While familiarity with git is nowadays common, many developers are not
familiar with mail-based patch submission. Add a paragraph to the
contribution guide to mention that libcamera uses a mail-based process
(which seems to have been taken for granted so much that we forgot to
say it explicitly), and link to git-send-email.io to help newcomers
setup git-send-email.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Some of the values were listed incorrectly. Specifically:
ExposureValue: the range is now centred correctly on zero
Brightness: the default value (0.0) is made explicit
Contrast: the default value is corrected to be 1.0
Saturation: the default value is corrected to be 1.0
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fixes two spelling mistakes in introduction.rst
This patch has no functional changes.
Signed-off-by: Kunal Agarwal <kunalagarwal1072002@gmail.com>
Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Synchronise with other IPA interfaces (for e.g. IPU3, RkISP1)
that uses queueRequest() to pass in the request controls to
IPA.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Queuing of request (i.e. passing of controls to the IPA)
and filling of the parameters buffer are two separate operations.
Treat them as such by splitting them into two functions in
the rkisp1 IPA interface.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The OV5640 is an OmniVision sensor with a linear gain model, expressed
in 1/16 steps.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IMX296 is a Sony sensor that expresses its gain in 0.1dB units. It
thus maps to the exponential gain model.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IMX290 is a Sony sensor that expresses its gain in 0.3dB units. It
thus maps to the exponential gain model.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The CameraSensorHelper specifies two gain models, linear and
exponential. They are modelled after the MIPI CCS specification. Only
the linear model has been implemented, the exponential model was left
for later.
We now need to support sensors that configure their gain in a hardware
register with a value expressed in dB. This has similarities with the
MIPI CCS exponential gain model, but is only has an exponential factor,
while CCS also allows sensors to support a configurable linear factor.
The full CCS exponential model needs two values (for the linear and
exponential factors) to express a gain, while IPAs use a single linear
gain value internally. However, the exponential gain model example in
the CCS specification has a fixed linear factor, which may indicate that
it could be common for sensors that implement the exponential gain model
to only use the exponential factor. For this reason, implement the
exponential gain model with a fixed linear factor, but with a
sensor-specific coefficient for the exponential factor that allows
expressing the gain in dB (or other logarithmical units) instead of
limiting it to powers of 2 as in the MIPI CCS specification.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
To prepare for other gain models than the linear model, store the gain
constants in a union with per-model members. Due to the lack of
designated initializer support in gcc with C++17, initializing a single
complex structure that includes a union will be difficult. Split the
gain model type to a separate variable to work around this issue.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The errno variable can potentially be overwritten by operator<<(). Store
it in a local variable before logging the error message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The Sony IMX290 is a rolling shutter sensor with a 1945x1109 pixel array
size, with a recommended resolution after CFA interpolation of
1920x1080.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Possibly the most trivial patch.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a validation check for sensor controls validateSensorControls()
before they are queried in IPAIPU3::updateSessionConfiguration().
Fail the IPAIPU3::configure() if the required sensor controls are
not found.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Drop exposure, gain private members from IPAIPU3 because the values
are handled directly via IPAFrameContext.
Move the default vblank value from IPAIPU3 to IPASessionConfiguration
structure as it is a default static value not expected to change
for a session.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The exposure and gain limits are required for AGC configuration
handled in IPAIPU3::updateSessionConfiguration(), which is happening
already. Therefore the max/min private members in IPAIPU3 class for
exposure/gain serve no use except setting initial values of exposure_
and gain_ members.
Drop the max/min private members from IPAIPU3 class and set initial
gain_ and exposure_ in IPAIPU3::updateSessionConfiguration().
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The RkISP1 ISP calculates a mean value for Y, Cr and Cb at each frame.
There is a RGB mode which could theoretically give us the values for R,
G and B directly, but it seems to be failing right now.
Convert those values into R, G and B and estimate the gain to apply in a
grey world.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As for the IPU3, we can estimate the histogram of the luminance. The
RkISP1 can estimate multiple ones, the R, G and B ones, the Y only one
and a combination of RGB. The one we are interested by in AGC is the Y
histogram.
Use the hardware revision to determine the number of bins of the
produced histogram.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Histogram constructor does not modify the data. Pass it a
Span<const uint32_t> instead of a Span<uint32_t>.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to have the proper pixel levels, apply a fixed black level
correction, based on the imx219 tuning file in RPi. The value is 4096 on
16 bits, and the pipeline for RkISP1 is on 12 bits, scale it.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Introduce a frameCount variable in the IPAFrameContext which increments
each time a request is queued. It is reset at configure call, when the
camera is started.
This will allow the frameCount to be used by other algorithms, without
having to keep multiple private frame counters.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The pre-push git hook script catches commits without a SoB line
corresponding to the committer, but doesn't perform the same check on
the author. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a test for V4L2BufferCache::isEmpty() for various levels for cache
fullness.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When streamOff() is called, ensure the cache entries for the remaining queued
buffers are freed since this will not happen via the dequeueBuffer() mechanism.
Additionally, add a V4L2BufferCache::isEmpty() function and assert that the
cache is empty at the end of the streamOff() call.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the device is in the process of being stopped (i.e. Stopping state), any
call to queueBuffer() must fail. This is to ensure the integrity of the buffer
queue, as it gets cleared at the end of streamOff.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace the existing streaming_ state variable with an enum to track the
following three state: Streaming, Stopping, and Stopped. The alternate states
will be used in a subsequent commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The original use of RPi::Stream::reset() was to clear the external flag state
and free/clear out the framebuffers for the stream. However, the latter is now
done through PipelineHandlerRPi::configure(). Rework
PipelineHandlerRPi::configure() to call RPi::Stream::setExternal() instead of
RPi::Stream::reset() to achieve the same thing.
Repurpose RPi::Stream::reset() to instead reset the state of the buffer handling
logic, where all internally allocated buffers are put back into the queue of
available buffers. As such, rename the function to RPi::Stream::resetbuffers().
This resetbuffers() is now called from PipelineHandlerRPi::start(), allowing the
pipeline handler to correctly deal with start()/stop()/start() sequences and
reusing the buffers allocated on the first start().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Currently, all framebuffer allocations get freed and cleared on a stop in
PipelineHandlerRPi::stopDevice(). If PipelineHandlerRPi::start() is then called
without an intermediate PipelineHandlerRPi::configure(), it will re-allocate and
prepare all the buffers again, which is unnecessary.
Fix this by not freeing the buffer in PipelineHandlerRPi::stopDevice(), but
insted doing it in PipelineHandlerRPi::configure(), as the buffers might have
to be resized.
Add a flag to indicate that buffer allocations need to be done on the next
call to PipelineHandlerRPi::start().
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This function used to clear the camera buffers does not belong in the
PipelineHandlerRPi class as it only access members of the RPiCameraData,
so move it.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2DeviceFormat structure for the ISP Output 1 node was a copy of what is
used ISP Output 0 node, but with the size changed. However, the plane size and
stride values were not updated. So there is a possibility that the buffer might
be over-sized for the requested resolution.
Fix this by only copying the relevant fields from the ISP Output 0
V4L2DeviceFormat structure, and let the device driver size the planes as needed.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The start(unsigned int msec) overload is error-prone, as the argument
unit can easily be mistaken in callers. Drop it and update all callers
to use the start(std::chrono::milliseconds) overload instead.
The callers now need to use std::chrono_literals. The using statement
could be added to timer.h for convenience, but "using" is discouraged in
header files to avoid namespace pollution. Update the callers instead,
and while at it, sort the "using" statements alphabetically in tests.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The RkISP1Path::generateConfiguration() function limits the maximum
resolution to the sensor resolution, to avoid upscaling. It however
doesn't take the sensor aspect ratio into account, which leads to a
maximum (and default) resolution of 1920x1920 when using the self path
with a sensor that has a higher resolution.
Fix it by constraining the minimum and maximum resolutions to match the
sensor's aspect ratio.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
One if...endif block is incorrectly indented. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPARkISP1Interface currently uses event-type based structures in
order to communicate with the pipeline-handler (and vice-versa).
Replace the event based structures with dedicated functions associated
to each operation.
The translated naming scheme of operations to dedicated functions:
ActionV4L2Set => setSensorControls
ActionParamFilled => paramsBufferReady
ActionMetadata => metdataReady
EventSignalStatBuffer => processStatsBuffer()
EventQueueRequest => queueRequest()
The lexical of IPARkISP1::metadataReady() will now conflict with the
metadataReady Signal being introduced in this patch as part of the
interface change. Hence, rename IPARkISP1::metadataReady() to
IPARkISP1::prepareReady() to prevent the conflict.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The private members of exposure and gain limits can be dropped
from IPARkISP1 since they are not used class-wide and can be easily
replaced by local counter-parts.
In case they are required to be widely available, these should then
sit in IPASessionConfiguration.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
s/bytesused/bytes used/
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a comment to clarify why we set v4l2_buffer timestamp while
queuing the buffer (VIDIOC_QBUF). The timstamps are required to
be supplied for memory-to-memory devices for output streams which
then are copied to capture stream buffers with the help of
V4L2_BUF_FLAG_TIMESTAMP_COPY (set by the driver).
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
