| Age | Commit message (Collapse) | Author |
|---|
|
Try to set the default configuration, a modified valid configuration and
an invalid configuration.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a test to verify reading the default configuration from a camera
works.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It is not permitted to configure streams before a camera is acquired.
Fixes: 77100a7578d8a0cc ("libcamera: camera: add state machine to control access from applications")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Before calling into the pipeline handler make sure the streams provided
by the application actually belongs to the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Buffers must have all mappings destroyed before buffers can be freed by the
V4L2 device that has allocated them.
Swap the ordering of freeBuffers() and destroyBuffers() to correct this.
Fixes: bd38112b7795 ("libcamera: camera: Extend the interface to support capture")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When constructing a Plane, the exported buffer provides a dmabuf handle which
is set to the Plane object.
This action duplicates the handle for internal storage, and the original fd is
not used and needs to be closed.
Close the handle, ensuring that the resources can be correctly managed.
Fixes: 771befc6dc0e ("libcamera: v4l2_device: Request buffers from the device")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Cosmetic update of V4L2Device class: remove the return type from Doxygen
documentation of inline functions.
Cosmetic update, no functional changes intended.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for devices that provide video meta-data to v4l2_device.cpp
and re-arrange bufferType handling in open() method.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Cosmetic updated of V4L2Subdevice class: re-sort methods and comments to
reflect the declaration order in the class definition.
Cosmetic update, no functional changes intended.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add test to list formats on a v4l2 subdevice.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement format and size enumeration methods to list all the available
subdevice image resolutions and formats.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When stopping the stream all pending requests are cancelled, resulting
in the request completion signal being emitted with the request status
set appropriately. Check the request status in the request completion
slot and skip requeuing the request if it has been cancelled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Request complete by themselves when all the buffers they contain have
completed, connecting the buffer's completed signal to be notified of
buffer completion. While this works for now, it prevents pipelines from
delaying request completion until all metadata is available, and makes
it impossible to ensure that requests complete in the order they are
queued.
To fix this, make request completion handling explicit in pipeline
handlers. The base PipelineHandler class is extended with
implementations of the queueRequest() and stop() methods and gets new
completeBuffer() and completeRequest() methods to help pipeline handlers
tracking requests and buffers.
The three existing pipeline handlers connect the bufferReady signal of
their capture video node to a slot of their respective camera data
instance, where they use the PipelineHandler helpers to notify buffer
and request completion. Request completion is handled synchronously with
buffer completion as the pipeline handlers don't need to support more
advanced use cases, but this paves the road for future work.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a new field to the Request class to report its completion status,
and a new complete() method to update the status.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a new field to the Buffer class to report its completion status,
with a new cancel() method to mark the buffer as cancelled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Mandate creationg of pipeline-specific data by pipeline handlers. This
allows simplifying the API by passing the pipeline-specific data to the
registerCamera() method and removing the separate setCameraData()
method.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Extend the CameraData class with two member variables pipe_ and camera_
that store pointers to the pipeline handler and camera that the
CameraData instance is related to. This will be used by pipeline
handlers to access the camera and the pipeline in member methods of
their CameraData derived classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The start(), stop() and queueRequest() methods receive a const pointer
to the related Camera object. The stop() request will need to modify the
state of the camera, in order to report completion of pending requests.
Un-constify the Camera pointer to that method, and update the start()
and queueRequest() methods similarly for coherency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Subclassing CameraData will become mandatory for pipeline handlers.
Create a new VimcCameraData class and instantiate it when creating
cameras to prepare for that change. The video_ and stream_ fields of the
VIMC pipeline handler belong to the camera data, move them there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Subclassing CameraData will become mandatory for pipeline handlers.
Create a new UVCCameraData class and instantiate it when creating
cameras to prepare for that change. The video_ and stream_ fields of the
UVC pipeline handler belong to the camera data, move them there.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Media devices are acquired in the match() function of pipeline handlers,
and explicitly released if no match is found. The pipeline handler is
then deleted, which causes a second release of the media device in the
destructor. Fix this by removing the explicit release in the match()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Provide a getter method to access the device node path. For video
devices it is usually the most informative description.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add test for V4L2Device set and get format methods.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add test for video format get and set operations on V4L2Subdevice class.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update the crop/compose rectangle provided to setCrop()/setCompose()
methods with the rectangle sizes set by the device driver after a
S_SELECTION ioctl operation.
While at there, fix the use of 'top' and 'left' field of the selection
rectangle, which where wrongly used.
Fixes: 468176fa07d9 ("libcamera: Add V4L2Subdevice")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Prefix the V4L2Subdevice error messages with the name of the entity.
Remove the manually printed name from log messages where it was used and
standardize error messages while at there.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Store the media entity backing the V4L2Subdevice and add a deviceName()
method to retrieve the human readable name of the subdevice, which is
created using the name of the associated media entity.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
There is a need to better control the order of operations an application
performs on a camera for it to function correctly. Add a basic state
machine to ensure applications perform operations on the camera in good
order.
Internal to the Camera states are added; Available, Acquired,
Configured, Prepared and Running. Each state represents a higher state
of configuration of the camera ultimately leading to the highest state
where the camera is capturing frames. Each state supports a subset of
operations the application may perform.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The arrays that store Stream pointers shall always contain unique
values. Storing them in vectors opens up for the same stream pointer
appearing twice. Remove this possibility by storing them in a set which
guarantees each element is unique.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Upcoming enforcing of order the camera shall be operate on is not
compatible with the cam utility. Requests shall be queued after the
camera is started, not before.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Rapid growth of the library have resulted in slightly different wording
to document that a function returns 0 on success or a negative error
code otherwise. Align all different variations.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The return statement is missing altogether and an error is silently
ignored. Fix this and also update the empty map to use the correct type
for the map key.
Fixes: 65ea2422d24a3073 ("libcamera: camera: extend camera object to support configuration of streams")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Running the cam tool without any options results in the tool to exit
with EXIT_FAILURE but no usage being printed, this is confusing. Improve
this by also printing the usage text.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since commit c8c546fe99a343c1 ("cam: options: Add option type handling
to options parser") introduced type handling for options the context the
option is read became important. When reading the camera option for
printing there is no explicit context to print it as a string and
instead the int context was chosen resulting in:
$ cam --camera foo
Camera 0 not found
While the expected output is:
$ cam --camera foo
Camera foo not found
Fix this by providing the correct context for the camera option when
printing it.
Fixes: c8c546fe99a343c1 ("cam: options: Add option type handling to options parser")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The return value when start() and stop() the camera should be checked
and handled.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The allocated buffers needs to be freed once the application is done
with them.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The only caller of configureStreams() stores its return value as an int
and not bool. This is confusing and also prevents the (possibly)
different error codes returned by Camera::configureStreams() to be
propagated inside the cam tool. Fix this by changing the return type to
int and propagate the return value from the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The format requested by configureStreams() should exactly match what is
programmed on the video device. If they do not match the call should
fail as the application in that case will not know what configuration
was actually programmed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The format requested by configureStreams() should exactly match what is
programmed on the video device. If they do not match the call should
fail as the application in that case will not know what configuration
was actually programmed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the documentation to explicitly state that the pipeline handler
implementations are responsible for validating that the requested
configuration can be exactly satisfied by the hardware.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SUBDEV_S_SELECTION argument needs to be a pointer. Fix it.
Fixes: 468176fa07d9 ("libcamera: Add V4L2Subdevice")
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Using std::move() on return statement of a method or on the its returned
value prevents the compiler from implementing copy-elision. Discourage
that in the coding style document.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Remove the std::move() call on the shared_ptr<MediaDevice *> returned by
the search() method and remove the std::move() call on temporary return
value in pipeline handlers that use the method.
Thanks to copy elision, the regular constructor of the newly created
object is called, avoiding un-necessary copies.
Furthermore, the use of std::move() in the return and assignment
statements prevents the compiler from performing copy elision, forcing
it to generate two sequences of un-necessary calls to the class'
move constructor and destructor.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Since there is no valid reason to exceed 80 columns for this lane, break
it.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2Subdevice class uses MediaEntity instances, and the
corresponding header is not included.
Fix this by forward declaring the MediaEntity class.
Fixes: 468176fa07d9 ("libcamera: Add V4L2Subdevice")
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Obtain two V4L2Devices and use one to obtain a BufferPool.
Propagate the formats from the first to the second device and then commence
sending buffers between the two devices in a ping-pong fashion.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Ensure that the cleanup operation releases the device and resources.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change the variable name globally throughout the tests.
Repair the V4L2DeviceTest constructor style, as checkstyle complained.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the ability to import a BufferPool into the V4L2Device allowing
external dmabuf backed buffers to be queued.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
exportBuffers() can only operate on an existing BufferPool allocation. The
pool identifies its size through its .count() method.
Passing a count in to the exportBuffers() call is redundant and can be
incorrect if the value is not the same as the BufferPool size.
Simplify the function and remove the unnecessary argument, correcting all uses
throughout the code base.
While we're here, remove the createBuffers() helper from the V4L2DeviceTest
which only served to obfuscate which pool the buffers were being allocated for.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
