summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-16libcamera: v4l2_subdevice: Add missing MEDIA_BUS_FMT_xxxx16_1X16 infoNaushir Patuck
Add the missing 16-bit MEDIA_BUS_FMT_xxxx16_1X16 definitions to the mediaBusFormatInfo table. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-16libcamera: formats: Add PiSP specific image and config buffer formatsNaushir Patuck
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2: - V4L2_PIX_FMT_PISP_COMP1_xxx - V4L2_PIX_FMT_PISP_COMP2_xxx Add the Raspberry Pi 5 PiSP Frontend and Backend config formats: - V4L2_META_FMT_RPI_FE_CFG - V4L2_META_FMT_RPI_BE_CFG Add the Raspberry Pi 5 PiSP Frontend statistics format: - V4L2_META_FMT_RPI_FE_STATS Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-16include: linux: Add PiSP specific image and config buffer formatsNaushir Patuck
Add the Raspberry Pi 5 PiSP specific compressed Bayer format types 1/2: - V4L2_PIX_FMT_PISP_COMP1_xxx - V4L2_PIX_FMT_PISP_COMP2_xxx Add the Raspberry Pi 5 PiSP Frontend and Backend config formats: - V4L2_META_FMT_RPI_FE_CFG - V4L2_META_FMT_RPI_BE_CFG Add the Raspberry Pi 5 PiSP Frontend statistics format: - V4L2_META_FMT_RPI_FE_STATS The corresponding changes submitted to the linux-media mailing list can be found at: (series "media: raspberrypi: Add support for PiSP Back End") https://lore.kernel.org/linux-media/20240502110503.38412-4-jacopo.mondi@ideasonboard.com/ https://lore.kernel.org/linux-media/20240502110503.38412-5-jacopo.mondi@ideasonboard.com/ and for the DRM mailing at: (patch "[RFC] drm/fourcc: Add RPI modifiers") https://lore.kernel.org/dri-devel/20240226153854.99471-1-jacopo.mondi@ideasonboard.com/ Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-16libcamera: formats: Add RGB48 formatsNaushir Patuck
Add support for 16-bps (48-bpp) RGB output formats to libcamera. These new formats are defined for the RGB and BGR ordering. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-16include: linux: Add RGB48 formatsNaushir Patuck
Add support for 16-bps (48-bpp) RGB output formats in the uapi headers. These new formats are defined for the RGB and BGR ordering. The corresponding change submitted to the linux-media and DRM mailing lists can be found at: https://lore.kernel.org/linux-media/20240502110503.38412-3-jacopo.mondi@ideasonboard.com/ and https://lore.kernel.org/dri-devel/20240226132544.82817-1-jacopo.mondi@ideasonboard.com/ respectively. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14libcamera: camera_manager: Add environment variable to order pipelines matchJulien Vuillaumier
To match the enumerated media devices, each registered pipeline handler is used in no specific order. It is a limitation when several pipelines can match the devices, and user has to select a specific pipeline. For this purpose, environment variable LIBCAMERA_PIPELINES_MATCH_LIST is created to give the option to define an ordered list of pipelines to match on. LIBCAMERA_PIPELINES_MATCH_LIST="<name1>[,<name2>[,<name3>...]]]" Example: LIBCAMERA_PIPELINES_MATCH_LIST="rkisp1,simple" Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14libcamera: pipeline: Add a get factory by name helperJulien Vuillaumier
Add a static helper to the PipelineHandlerFactoryBase class to allow retrieving a pipeline by name. Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14libcamera: pipeline: Rename pipelines to a shorter nameJulien Vuillaumier
The PipelineHandlerFactoryBase class has a name that is propagated to the PipelineHandler instance it creates. In present implementation, this name comes from the REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the stringified name of the PipelineHandler derived class. Therefore, PipelineHandler factories and instances names can be quite long such as "PipelineHandlerRkISP1". A libcamera user may have to explicitly refer to a PipelineHandler name for configuration purpose: one usage of the name can be to define a pipeline handlers match list and their priorities. It is desired, for user convenience, to use a short name to designate a pipeline handler. Reusing the short pipeline names already defined in the meson option files is an existing and consistent way of naming pipelines. This change adds an explicit name parameter to the REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to define the name of a pipeline handler factory, instead of the current pipeline handler class name. Each pipeline registration is updated accordingly. The short name assigned corresponds to the pipeline directory name in the source tree. It is consistent with pipelines names used in meson. Changing the pipeline name has an impact on the IPA modules: each module defines a IPAModuleInfo structure. This structure has a pipelineName member defining the pipeline handler name it shall match with. Therefore, each internal IPA module definition has to be changed to have its IPAModuleInfo pipelineName name updated with the short pipeline handler name. In addition to this pipelineName member, the IPAModuleInfo structure also has a name member, associated to the IPA module name. Having renamed the pipelines to a short name, the pipeline name and the IPA module names of the IPAModuleInfo structure are the same: for in-tree IPA, they correspond to the respective pipeline and IPA subdirectories in the source tree. However the IPA name could be different, for instance with a close source IPA implementation built out-of-tree. Thus, it makes sense to keep the IPA name in that structure, as the 2 definitions may not always be redundant. Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust for clang-format style fix, reformat commitmsg] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14gstreamer: Use copied camera nameBarnabás Pőcze
The camera name is copied in gst_libcamera_src_open() as we can't hold the lock protecting the name while calling GST_ELEMENT_ERROR(). The GST_ELEMENT_ERROR() macro sends a message on the bus, taking more locks and possibly causing issues. However, the current code makes the copy, but does not actually use it. So fix that. Fixes: 58feb69f852289 ("gst: libcamerasrc: Implement selection and acquisition") Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-14gstreamer: Fix string memory leakBarnabás Pőcze
The string returned by `gst_video_colorimetry_to_string()` has to be freed, this was missing. Fixes: fc9783acc6083a ("gstreamer: Provide colorimetry <> ColorSpace mappings") Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-14Documentation: Add option to treat Doxygen warnings as errorsLaurent Pinchart
A new Doxygen warning introduced in a recent commit went unnoticed, both in manual tests and in CI. Unlike C/C++ warnings that are treated as errors, we don't fail the build with Doxygen warnings. This is due to the fact that the libcamera documentation compiles cleanly only with quite recent versions of Doxygen. Enabling the WARN_AS_ERROR Doxygen option unconditionally could bother many users. To improve the situation, add a meson option to treat Doxygen warnings as errors. The option is disabled by default, preserving the current behaviour, and will be enabled in CI builds. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-13test: gstreamer: Simplify single stream testNicolas Dufresne
The single stream test for the GStreamer component has a simple pipeline construction using only a fakesink. The implementation currently supports connecting to a more complex stream construction defined by the streamDescription, but this is over engineered for the simple need to start a stream to capture and discard the frames. Convert the use of gst_parse_bin_from_description_full() which uses only a single element 'fakesink' to construct the fakesink directly and link it to the libcamerasrc. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-13ipa: libipa: histogram: Fix documentation of constructorLaurent Pinchart
Commit 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") added a new constructor for the Histogram class. The implementation is inline in the header file, and the documentation was added in the corresponding .cpp file, but it missed the \fn directive. This causes Doxygen to complain: src/ipa/libipa/histogram.h:31: warning: Member Histogram(Span< const uint32_t > data, Transform transform) (function) of class libcamera::ipa::Histogram is not documented. src/ipa/libipa/histogram.cpp:59: warning: libcamera::ipa::Histogram::bins has @param documentation sections but no arguments Fix it. Fixes: 1dc01bc9e6c3 ("ipa: libipa: histogram: Add transform parameter to constructor") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-09libcamera: Drop remaining file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in all remaining locations that were not caught by the automated script as they are out of sync with the file name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09libcamera: Drop file name from header comment blocks in templatesLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in template files and templates embedded in generator scripts. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-09ipa: rkisp1: agc: Fix histogram constructionPaul Elder
This histogram reported by the rkisp1 hardware is 20 bits, where the upper 16 bits are meaningful integer data and the lower 4 bits are fractional and meant to be discarded. Remove these 4 bits when construction the histogram. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-09ipa: rpi: Fix for incorrectly reported max shutter speedNaushir Patuck
The maximum shutter speed calculation in the cam-helper relied on the frame duration limits being correctly set in the cam-helper's mode structure. This was not the case on first startup, so the maximum shutter speed reported back via the ControlInfo was incorrect. Fix this by setting up the camera mode in the cam-helper before querying for the max shutter value. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09pipeline: rpi: Avoid duplicating size range for the same pixel formatDavid Plowman
Some V4L2 formats translate to the same pixel format, e.g. YU12 and YM12 both produce YUV420. In this case our ISP driver advertises the same size range for both, but we must not record the same thing twice for the same pixel format (which will cause a failure later on). Instead, ignore the V4l2 format if the pixel format has already been seen. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-09ipa: libipa: histogram: Add transform parameter to constructorPaul Elder
Add a parameter to the histogram constructor that takes a transformation function to apply to all the bins upon construction. This is necessary notably for the rkisp1, as the values reported from the hardware are 20 bits where the upper 16-bits are meaningful integer values and the lower 4 bits are fractional and meant to be discarded. As adding a right-shift parameter is probably too specialized, a generic function is added as a parameter instead. While at it, optimize the existing constructor to avoid push_back() into a vector with a known final size. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08ipa: rkisp1: Remove bespoke Agc functionsDaniel Scally
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc we can remove the bespoke functions from the IPA's class. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminanceDaniel Scally
Now that we have a AgcMeanLuminance class that centralises our AEGC algorithm, derive the RkISP1's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicities sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Remove bespoke AGC functions from IPU3Daniel Scally
Now that the IPU3's Agc is derived from MeanLuminanceAgc we can delete all the unecessary bespoke functions. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: ipu3: Derive ipu3::algorithms::Agc from AgcMeanLuminanceDaniel Scally
In preparation for switching to a derivation of AgcMeanLuminance, add a function to parse and store the statistics for easy retrieval in an overriding estimateLuminance() function. Now that we have a MeanLuminanceAgc class that centralises our AEGC algorithm, derive the IPU3's Agc class from it and plumb in the necessary framework to enable it to be used. For simplicity's sake this commit switches the algorithm to use the derived class, but does not remove the bespoke functions at this time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add AgcMeanLuminance base classDaniel Scally
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in very large part; following the Rpi IPA's algorithm in spirit with a few tunable values in that IPA being hardcoded in the libipa ones. Add a new base class for AgcMeanLuminance which implements the same algorithm and additionally parses yaml tuning files to inform an IPA module's Agc algorithm about valid constraint and exposure modes and their associated bounds. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Add ExposureModeHelperPaul Elder
Add a helper for managing exposure modes and splitting exposure times into shutter and gain values. Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08libcamera: controls: Generate enum value-name mapsDaniel Scally
Generate maps for each control enum which associate strings that represent the enum values with the values themselves. This change will allow us to refer to enumerated control values using the string. For example if we want to pass variables to an algorithm for use when a control has a particular value we can embed within tuning files a dictionary that uses the control values as keys. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-08ipa: libipa: Allow creation of empty HistogramDaniel Scally
For convenience's sake allow the creation of empty Histograms so they can be embedded within other Classes and filled out with data at some later point in time. Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-07Revert "meson: Deprecate bitwise operations between different enumeration type"Laurent Pinchart
Enabling -Wdeprecated-enum-enum-conversion by default turned out to be a too hasty decision. It causes compilation failures with Qt headers prior to Qt v5.15.8. As the previous LTS versions of Debian and Ubuntu ship older Qt versions, those errors cause real inconvenience to users. This reverts commit bf4695266bfca8cc21bcf10a3281e874ebce0d27. The original goal of avoiding C++20 compilation regressions is still handled through a test in CI. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-07test: Don't add current build directory to include pathLaurent Pinchart
Meson adds the current source and build directory to the include path by default. This causes a namespace clash in tests when using C++20, as the Span class test is compiled into a binary named 'span', which then gets included by source code through indirect '#include <span>' directives. Unsurprisingly, the compiler doesn't react happily when fed binary data. We could work around the problem by renaming the test executable, but disabling the implicit inclusion of the local directory is a more generic solution that will avoid similar issues in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-05-03meson: Deprecate bitwise operations between different enumeration typeLaurent Pinchart
C++20 deprecates bitwise operations between different enumeration types. This is a bad practice even in C++17, so enable the deprecation warning. Doing so ensures no such operations will be added. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03apps: qcam: Use standard key sequence for quit actionLaurent Pinchart
Replace the manual CTRL+Q key sequence with QKeySequence::Quit. This automatically maps to the native shortcut for the quit action, regardless of the platform. Even though we don't expect qcam to run on non-Linux platform, using a QKeySequence is still a good practice when one exists. This doesn't change qcam's behaviour, as the native quit key sequence is CTRL+Q on Linux systems. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: shared_mem_object: Fix compilation with uClibcLaurent Pinchart
uClibc doesn't provide a memfd_create() implementation. Fix it by using a direct syscall when the function isn't available. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: utils: Avoid infinite recursion with strtod()Laurent Pinchart
When the C library doesn't provide local object support, the utils::strtod() function simply calls strtod() from the C library. The current implementation does so incorrectly, and calls utils::strtod() instead, resulting in infinite recursion. Fix it with a proper namespace qualifier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX415 sensor propertiesAlexander Stein
Provide the Sony IMX415 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX415 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03apps: cam: Fix C++20 deprecation warningBarnabás Pőcze
C++20 deprecated implicit capture of `this` via `[=]`. Fix that by explicitly capturing the necessary variables. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX335 sensor propertiesKieran Bingham
Provide the Sony IMX335 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX335 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-03libcamera: libipa: camera_sensor: Add Sony IMX283 sensor propertiesKieran Bingham
Provide the IMX283 camera sensor properties and registration with libipa for the gain code helpers. The test patterns exposed by the IMX283 do not map well to the current set of test pattern controls supplied by libcamera. These are left intentionally unimplemented. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-04-20android: camera_device: Always clear descriptors_ in stop()Anle Pan
When flush() is called and then a new stream configuration is set, the descriptors_ queue might have a chance to be not cleared in stop(), as the Camera is already in Stopped state. This will prevent further requests from being completed in sendCaptureResults() as the descriptors_ queue is not empty. To fix the issue, clear the descriptors_ even if the Camera State is Stopped. As a drawback the libcamera::Camera::stop() function might be called twice, but this is allowed by the Camera state machine, and the second call is guaranteed to be a nop. Signed-off-by: Anle Pan <anle.pan@nxp.com> Signed-off-by: Fang Hui <hui.fang@nxp.com> Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-20libcamera: Fix output spelling errorUmang Jain
There are two places where "output" is spelled as "ouput". Fix it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-20libcamera: device_enumerator: Fix spell errorUmang Jain
In the description of DeviceMatch, the word 'appropriate' is spelled incorrectly as 'appropriare'. Fix it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-19utils: checkstyle.py: Drop period at end of Doxygen one linersLaurent Pinchart
The libcamera documentation style calls for no period at the end of the Doxygen one-liner commands (\brief, \param and \return). Extend the DoxygenFormatter class to drop the period. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-19utils: checkstyle.py: Use r'' strings for regular expressionsLaurent Pinchart
It's a good practice to use r'' strings for regular expressions in Python, to avoid unexpected interaction with string escape sequences. Use them globally. This allows simplifying escaping in one of the regular expression strings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-17Documentation: coding-style: Clean up header guard styleKieran Bingham
Header guards were replaced by pragma once calls with commits 0a64cf8b7645 ("libcamera: Convert to pragma once") through to 796210ecea82 ("v4l2: Convert to pragma once") Update the coding style to reflect the updated header guard style. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-04-17ipu3: Use posix basenameKhem Raj
musl does not implement GNU basename extention and with latest musl the prototype from string.h is also removed [1] which now results in compile errors e.g. ../git/utils/ipu3/ipu3-pack.c:21:47: error: call to undeclared function 'basename'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration] These utilities are using this function in usage() which is used just before program exit. Always use the basename APIs from libgen.h which is posix implementation [1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7 Signed-off-by: Khem Raj <raj.khem@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: software_isp: Apply black level compensationMilan Zamazal
Black may not be represented as 0 pixel value for given hardware, it may be higher. If this is not compensated then various problems may occur such as low contrast or suboptimal exposure. The black pixel value can be either retrieved from a tuning file for the given hardware, or automatically on the fly. The former is the right and correct method, while the latter can be used when a tuning file is not available for the given hardware. Since there is currently no support for tuning files in software ISP, the automatic, hardware independent way, is always used. Support for tuning files should be added in future but it will require more work than this patch. The patch looks at the image histogram and assumes that black starts when pixel values start occurring on the left. A certain amount of the darkest pixels is ignored; it doesn't matter whether they represent various kinds of noise or are real, they are better to omit in any case to make the image looking better. It also doesn't matter whether the darkest pixels occur around the supposed black level or are spread between 0 and the black level, the difference is not important. An arbitrary threshold of 2% darkest pixels is applied; there is no magic about that value. The patch assumes that the black values for different colors are the same and doesn't attempt any other non-primitive enhancements. It cannot completely replace tuning files and simplicity, while providing visible benefit, is its goal. Anything more sophisticated is left for future patches. A possible cheap enhancement, if needed, could be setting exposure + gain to minimum values temporarily, before setting the black level. In theory, the black level should be fixed but it may not be reached in all images. For this reason, the patch updates black level only if the observed value is lower than the current one; it should be never increased. The purpose of the patch is to compensate for hardware properties. General image contrast enhancements are out of scope of this patch. Stats are still gathered as an uncorrected histogram, to avoid any confusion and to represent the raw image data. Exposure must be determined after the black level correction -- it has no influence on the sub-black area and must be correct after applying the black level correction. The granularity of the histogram is increased from 16 to 64 to provide a better precision (there is no theory behind either of those numbers). Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: Add "Software ISP benchmarking" documentationHans de Goede
Add a "Software ISP benchmarking" documentation section which describes the performance/power consumption measurements used during the Software ISP's development. Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: debayer_cpu: Add BGR888 output supportHans de Goede
BGR888 is RGB888 with the red and blue pixels swapped, adjust the debayering to swap the red and blue pixels in the bayer pattern to add support for writing formats::BGR888. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: debayer_cpu: Add support for 8, 10 and 12 bpp unpacked bayer inputHans de Goede
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard bayer orders. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-04-16libcamera: swstats_cpu: Add support for 8, 10 and 12 bpp unpacked bayer inputHans de Goede
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard bayer orders. Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s Tested-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Milan Zamazal <mzamazal@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>