| Age | Commit message (Collapse) | Author |
|---|
|
Add all the autofocus controls handled by the IPA into the ControlInfoMap if
a controllable lens actuator is present.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Reorder the libcamera/request header file inclusion to match the libcamera
guidelines.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new AfAlgorithm class that defines the interface for the Raspberry Pi
autofocus algorithm.
Add an AfStatus structure that returns the results of the autofocus algorithm
back to the IPA.
Add a structure for PDAF statistics provided by supported sensors for use with
an autofocus algorithm. This structure is currently based on the IMX708's PDAF
"Type 1" statistics.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a setLensControls() function to the IPA/pipeline handler interface. This
will be used in a future commit to control the lens actuator position from an
autofocus algorithm.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the available lens controls to the IPA through the configure() function.
Validate that the V4L2_CID_FOCUS_ABSOLUTE does exist. If it doesn't, log a
warning message, and do not advertise focus related controls from the IPA.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the legacy entityControls map passed into ipa::configure() with explicit
fields for sensor and ISP controls. This removes any ambiguity over which set of
controls corresponds with specific integer keys.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove the streamConfig parameter from the ipa::configure() call, it is never
used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Check if a lens actuator is available by the presense of the lens driver entity
in the pipeline handler. Pass this result to the IPA on init.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The supported pipelines are listed in three places: the
meson_options.txt file, the defined array when a user selects
-Dpipelines="all", and arrays defined when the default
-Dpipelines="auto" is selected.
This can be hard to maintain and error prone.
Rework the definition of pipeline selection to a single table which
specifies the architecture(s) that the pipeline handler supports and
iterate it to handle the special cases for 'all', 'auto' and 'test'.
The current behaviour such that 'all' takes precedence over 'auto' is
maintained, and 'test' is now extended such that additional test
pipeline handlers can easily be introduced.
The existing implementation defines the i.MX8-ISI and RKISP1 pipeline
handlers as only supported by 'aarch64'. This conversion changes the
behaviour such that those pipeline handlers are now supported on both
'arm' and 'aarch64' as each of those platforms could support a 32-bit
ARM build.
Suggested-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously the x,y offsets in the min/max ScalerCrop control values
were zero. Here we make them the same as the sensor's analogue crop
offset which is I think less misleading.
With this change, it also seems reasonable to advertise the default
scaler crop value to be the true default that you will get. This makes
it possible for applications to see what that value will be without
having to start the camera and wait for frames.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Briefly document the optional requirement support for H/V flip controls.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Add support for Transform to the RkISP1 pipeline handler.
The pipeline rotates using the sensor's V/H flips, hence use the
CameraSensor helpers to handle transformation requests from
applications.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Augment the CameraSensor::setFormat() function to configure horizontal
and vertical flips before applying the image format on the sensor.
Applying flips before format is crucial as they might change the Bayer
pattern ordering.
To allow users of the CameraSensor class to specify a Transform,
add to the V4L2SubdeviceFormat class a 'transform' member, by
default initialized to Transform::Identity.
Moving the handling of H/V flips to the CameraSensor class allows to
remove quite some boilerplate code from the IPU3 and RaspberryPi
pipeline handlers.
No functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
The two pipeline handlers that currently support Transform (IPU3 and
RaspberryPi) implement it by operating H/V flips on the image sensor.
Centralize the code that validates a Transform request against the
sensor rotation capabilities in the CameraSensor class.
The implementation in the IPU3 pipeline handler was copied from the
RaspberryPi implementation, and is now centralized in CameraSensor to
make it easier for other platforms.
The CameraSensor::validateTransform() implementation comes directly from
the RaspberryPi pipeline handler, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
During the camera sensor driver validation, verify if the sensor
supports horizontal and vertical flips and store a flag as
CameraSensor::supportFlips_ class member.
The flag will be later inspected when applying flips.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Support for the OmniVision OV8858 sensor is scheduled for inclusion in
the Linux kernel in version v6.3.
Add support for the sensor in libcamera by providing static properties
and a camera sensor helper in libipa.
The camera sensor helper expresses analogue gain increments in 1/128
step which differs from what is reported in the sensor documentation in
section "5.8 manual exposure compensation/ manual gain compensation" [0]
A more detailed analysis of the sensor gain model is reported at:
https://patchwork.linuxtv.org/project/linux-media/patch/20221106171129.166892-2-nicholas@rothemail.net/#142267
Record with a \todo note a reference to discussion on the gain model
implementation.
Signed-off-by: Nicholas Roth <nicholas@rothemail.net>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Omnivision OV4689 sensor driver exposes maximum analogue gain of
16x. Raise kMaxAnalogueGain to 16.0, so that the full gain range can
be used.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a minimal tuning file for Omnivision OV4689, specifying black
level subtraction level.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add an entry to the sensor properties for Omnivision OV4689.
Kernel supports two more types of color bars patterns, which we do not
expose now.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add support for Omnivision OV4689 image sensor to libipa.
The sensor implements a linear gain equation with analogue gain
control values 0-2047 corresponding to 0x-16x physical gain range.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The intention is that the "main" colour space is the colour space of
the largest non-raw stream. Unfortunately the use of "config_[i].size"
is clearly incorrect, and has been copied from prior versions of the
code. This patch corrects the error.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
When an IPA module is loaded, the loadIPAModuleInfo() function validates
the ipaModuleInfo structure. As part of that process, it checks that the
ipaModuleInfo symbol size matches the expected structure size. This
check breaks with clang and ASan, as the LLVM's address sanitizer
implementation includes the redzone after the structure in the symbol
size, currently growing it by 156 bytes (on x86-64). This causes all IPA
modules to fail to load.
Fix the problem by relaxing the size check to only ensure that the
symbol is large enough to contain the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, if there are multiple streams, the --metadata flag will print
the metadata for each request multiple times.
Moving the metadata print logic outside the stream for loop this will no
longer occur.
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Comply with a checkstyle suggestion and separate inclusion directives.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current documentation of the BayerFormat::transform() function
reports examples on the Bayer components ordering transformation for
horizontal flip (mirroring) but not for vertical flip or for the
combination of the two.
It is useful to complete the documentation to ease understanding of the
transform() function on a sensor's Bayer pattern.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Not all C libraries include support for locale objects (locale_t) and
the strto*_l() family of functions. A notable example is uClibc that can
be compiled with a hardcoded "C" locale. Compilation then fails as the
newlocale(), freelocale() and strtod_l() functions are not defined.
Fix the compilation breakage by checking for the availability of the
locale_t type, and fall back to strtod() when the type isn't available.
This may not lead to the correct result if support for locale objects
isn't available and the locale isn't hardcoded to "C", but that is such
a corner case that we will likely never encounter it.
Fixes: e8ae254970cf ("libcamera: yaml_parser: Use C locale")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The strtod() function is locale-dependent, and thus ill-suited to parse
numbers coming from, for instance, YAML files. The YamlObject class uses
strtod_l() to fix that issue, but that function is not available with
all libc implementations. Correctly handling this problem is becoming
out of scope for the YamlObject class.
As a first step, add a strtod() helper function in the utils namespace
that copies the implementation from YamlObject, and use it in
YamlObject. The core issue will then be fixed in utils::strtod().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a commit checker to ensure that commit titles start with a prefix.
The commit issue message lists prefix candidates retrieved from the git
log.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Meson has deprecated implicit usage of the setup command, and this now
generates a warning:
WARNING: Running the setup command as `meson [options]` instead of `meson setup [options]` is ambiguous and deprecated.
Update the build instructions to use 'meson setup' explicitly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, doxygen is run by ninja in the top-level build directory,
therefore the "Documentation" folder is always created there. However,
when libcamera is built as a subproject, it should not touch the
top-level build directory because it can cause conflicts and because
the documentation won't be created where meson thinks it will be, so
the "doxygen" target will always be dirty and installation will fail.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fixes build failure on some build environments.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When parsing configuration files on systems with differing locales, the
use of strtod can produce different results, or in the worst case - fail
to parse expected values.
Fix this by using strtod_l() instead. To avoid constructing and
destructing a locale_t instance for every use of strtod_l(), create an
RAII class that wraps the locale_t and use it to provide a global "C"
locale.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=174
Bug: https://github.com/raspberrypi/libcamera/issues/29
Reported-by: https://github.com/kralo
Reported-by: Hannes Winkler <hanneswinkler2000@web.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an 'all' choice to the pipelines option, for building all pipelines.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The raw pixel format in form of the fourcc integer is not easily readable.
Use the string representation instead for easier debugging.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix a typo in the pipelines option documentation.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
By default all pipeline handlers are built, regardless on whether these
are needed in the host architecture or not. It makes more sense to build
only the pipeline handlers that will be used for the given architecture.
Let's do that by default now, but still allow to build the other
pipeline handlers if needed, by using the `pipelines` meson option. For
example, on a x86-64 platform:
$ meson build
...
Configuration
Enabled pipelines : ipu3
uvcvideo
Enabled IPA modules : ipu3
...
$ meson build -Dpipelines="ipu3,raspberrypi,rkisp1" -Dtest=true
...
Configuration
Enabled pipelines : ipu3
raspberrypi
rkisp1
vimc
Enabled IPA modules : ipu3
raspberrypi
rkisp1
vimc
...
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Bayer8 support is useful on hardware such as Librem 5, as GStreamer
provides easy solution for debayering and display of the camera
data. Add necessary glue to libcamerasrc element.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix various typos in the code base.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The two pipeline test (for ipu3 and rkisp1) are meant to perform very
basic validation of the corresponding pipeline handlers, limited to
verifying camera enumeration. They are not unit tests as such, they are
superseded by the lc-compliance tool, and they are never used in
practice (and always skipped). Drop them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When the address sanitizer is enabled, the Python unit tests fail due to
the link order runtime check as the Python interpreter is (generally)
not linked to ASan. Fix this by LD_PRELOAD'ing the ASan runtime. We have
to disable the leak detector as the Python interpreter itself leaks
memory, which would result in test failures.
To LD_PRELOAD the ASan runtime, the path to the binary needs to be
known. gcc gives us a generic way to get the path, but that doesn't work
with clang as the ASan runtime file name depends on the clang version
and target architecture. We thus have to keep the Python test disabled
when ASan is enabled and libcamera is compiled with clang.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When libcamera is compiled with the address sanitizer enabled, the
v4l2_compat test generates failures in the link order runtime check, as
the host v4l2-ctl and v4l2-compliance tools are not (generally) linked
to ASan. For this reason, the test is disabled, which sadly shrinks test
coverage.
Fix this by loading the ASan runtime using LD_PRELOAD. This needs to be
done from within the v4l2_compat_test.py Python script, as the Python
interpreter itself leaks memory and would cause test failures if run
with ASan.
To LD_PRELOAD the ASan runtime, the path to the binary needs to be
known. gcc gives us a generic way to get the path, but that doesn't work
with clang as the ASan runtime file name depends on the clang version
and target architecture. We thus have to keep the v4l2_compat test
disabled when ASan is enabled and libcamera is compiled with clang.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Return early with subdir_done() to reduce indentation in case the
v4l2_compat layer is not enabled. This matches our usual code patterns
in meson.build files, and prepares for enabling the v4l2_compat test
with ASan.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The imx477_scientific.json file was added to the source tree with
incorrect executable permission. Fix it.
Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry to the sensor properties for OnSemi AR0521.
The chip manual list one additional test pattern "PN9 Link integrity
test pattern" not supported by the mainline Linux driver.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for OnSemi AR0521 5Mpx image sensor to libipa.
The sensor analogue gain is implemented as a coarse and a fine factor,
with the coarse gain being a power of two and the fine gain being a
value in the [1.0, 2.0[ range. The mapping between gain codes and gain
values is tabulated in the datasheet, and the table values are very
close but not identical to the mathematical model. Compute the gain
using the model to keep the code shorter, if this causes precision
issues the calculation could be replaced with a table.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Key bug fixes:
* Segfault in the ContolInfo() constructor for an empty V4L2 menu
Bug: https://bugs.libcamera.org/show_bug.cgi?id=167
Fix: libcamera: v4l2_device: Workaround faulty control menus
This resolves and prevents crashes that have occured in Pipewire when
users connect poorly implemented UVC devices.
ABI Compliance:
abi-compliance-checker reports 100% ABI and API compatibility with with
v0.0.2, however 81e7689bb168 ("libcamera: stream: Turn StreamRole into
scoped enumeration") modifies an enum into a class enum. This may need
minor updates to applications, and didn't appear to be picked up by
abi-compliance-checker.
- See https://git.libcamera.org/libcamera/libcamera.git/commit/?id=81e7689bb168a for more details.
Highlights:
Core:
* Fix tracing when built as a subproject
* Avoid double map lookups in framebuffer_allocator
* Workaround faulty control menus
* controls: Change LensPosition units to dioptres
* camera_sensor: Add IMX519 sensor properties
* Documentation: contributing: Add commit message guidelines
* Declare generic converter interface
utils:
* Add libtuning
* Add initial libtuning script support for rkisp1 and raspberrypi.
* checkstyle.py: Check new header file on new and renamed meson.build files
ipa:
* Move IPA sensor controls validation to CameraSensor (IPU3/RKISP1)
rkisp1:
* Support FrameDurationLimits control for FrameRate management
* Support raw capture (IPA, configuration, and runtime)
* Add support for manual gain and exposure
* Fix stream size validation
* Add additional default values to controls
imx8-isi:
* Enumerate supported stream formats
* Set SensorTimestamp metadata
Raspberry Pi:
* Remove generic "pause" mechanism from Algorithm
- Remove enum BuffferMask from the mojom interface
- Fix digital gain calculations for manual mode
- Fix bug in IPA frame drop logic
- imx477: Update tuning file for the latest camera modules
- Add a "scientific" tuning for the IMX477
Apps:
- cam: kms: Avoid 'unused-parameter' warnings
- cam: Support parsing array controls in capture scripts
- gstreamer: Improve control id lookups
- lc-compliance: simple_capture: Free Requests properly
python:
- Support controls that use an array of Rectangles
- Expose the Request Sequence Number in Python Bindings
test:
- Validate CameraSensor Ancillary Devices (focusLens)
- controls: control_info: Test default def() values
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The python bindings are missing the ability to read the sequence number
of the Request object from the public API.
Expose the objects sequence number on the pybind11 surfaces to support
applications reading this value.
Signed-off-by: Matthew Goodman <matt@exclosure.io>
[Kieran: Revised commit message]
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a tuning file for the IMX477 more suited to scientific applications.
The key differences from the original tuning file are:
- Disable ALSC block completely
- Pure rec709 gamma curve, and no contrast enhance
- New CT curve and CCMs based on the illumination spectrum of a black body
radiator up to about 3600 K and the CIE illuminant D for higher color
temperatures.
Further details on the changes can be found at:
https://forums.raspberrypi.com/viewtopic.php?t=343449
All credit for these changes go to Dr. Rolf Henkel.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Extend the ControlInfo test to verify the behaviour of the default 'def'
argument to the ControlInfo constructor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The dlopen() & co. functions are provided by libdl on some systems, and
but the C library on others. Starting from version 0.62.0, meson handles
this behind the scenes when using dependency('dl'). Add a todo comment
to remember we should replace the manual implementation with a
dependency() call when updating to meson 0.62.0 or newer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
