| Age | Commit message (Collapse) | Author |
|---|
|
This histogram reported by the rkisp1 hardware is 20 bits, where the
upper 16 bits are meaningful integer data and the lower 4 bits are
fractional and meant to be discarded. Remove these 4 bits when
construction the histogram.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The maximum shutter speed calculation in the cam-helper relied on
the frame duration limits being correctly set in the cam-helper's mode
structure. This was not the case on first startup, so the maximum
shutter speed reported back via the ControlInfo was incorrect.
Fix this by setting up the camera mode in the cam-helper before querying
for the max shutter value.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Some V4L2 formats translate to the same pixel format, e.g. YU12 and
YM12 both produce YUV420. In this case our ISP driver advertises the
same size range for both, but we must not record the same thing twice
for the same pixel format (which will cause a failure later on).
Instead, ignore the V4l2 format if the pixel format has already been
seen.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a parameter to the histogram constructor that takes a transformation
function to apply to all the bins upon construction.
This is necessary notably for the rkisp1, as the values reported from
the hardware are 20 bits where the upper 16-bits are meaningful integer
values and the lower 4 bits are fractional and meant to be discarded. As
adding a right-shift parameter is probably too specialized, a generic
function is added as a parameter instead.
While at it, optimize the existing constructor to avoid push_back() into
a vector with a known final size.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Source files in libcamera start by a comment block header, which
includes the file name and a one-line description of the file contents.
While the latter is useful to get a quick overview of the file contents
at a glance, the former is mostly a source of inconvenience. The name in
the comments can easily get out of sync with the file name when files
are renamed, and copy & paste during development have often lead to
incorrect names being used to start with.
Readers of the source code are expected to know which file they're
looking it. Drop the file name from the header comment block.
The change was generated with the following script:
----------------------------------------
dirs="include/libcamera src test utils"
declare -rA patterns=(
['c']=' \* '
['cpp']=' \* '
['h']=' \* '
['py']='# '
['sh']='# '
)
for ext in ${!patterns[@]} ; do
files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done)
pattern=${patterns[${ext}]}
for file in $files ; do
name=$(basename ${file})
sed -i "s/^\(${pattern}\)${name} - /\1/" "$file"
done
done
----------------------------------------
This misses several files that are out of sync with the comment block
header. Those will be addressed separately and manually.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Now that the rkisp1 Agc algorithm is a derivation of MeanLuminanceAgc
we can remove the bespoke functions from the IPA's class.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a AgcMeanLuminance class that centralises our AEGC
algorithm, derive the RkISP1's Agc class from it and plumb in the
necessary framework to enable it to be used. For simplicities sake
this commit switches the algorithm to use the derived class, but
does not remove the bespoke functions at this time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that the IPU3's Agc is derived from MeanLuminanceAgc we can
delete all the unecessary bespoke functions.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In preparation for switching to a derivation of AgcMeanLuminance, add
a function to parse and store the statistics for easy retrieval in an
overriding estimateLuminance() function.
Now that we have a MeanLuminanceAgc class that centralises our AEGC
algorithm, derive the IPU3's Agc class from it and plumb in the
necessary framework to enable it to be used. For simplicity's sake
this commit switches the algorithm to use the derived class, but
does not remove the bespoke functions at this time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Agc algorithms for the RkIsp1 and IPU3 IPAs do the same thing in
very large part; following the Rpi IPA's algorithm in spirit with a
few tunable values in that IPA being hardcoded in the libipa ones.
Add a new base class for AgcMeanLuminance which implements the same
algorithm and additionally parses yaml tuning files to inform an IPA
module's Agc algorithm about valid constraint and exposure modes and
their associated bounds.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a helper for managing exposure modes and splitting exposure times
into shutter and gain values.
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Generate maps for each control enum which associate strings that
represent the enum values with the values themselves. This change
will allow us to refer to enumerated control values using the
string. For example if we want to pass variables to an algorithm
for use when a control has a particular value we can embed within
tuning files a dictionary that uses the control values as keys.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For convenience's sake allow the creation of empty Histograms so
they can be embedded within other Classes and filled out with
data at some later point in time.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Enabling -Wdeprecated-enum-enum-conversion by default turned out to be a
too hasty decision. It causes compilation failures with Qt headers prior
to Qt v5.15.8. As the previous LTS versions of Debian and Ubuntu ship
older Qt versions, those errors cause real inconvenience to users.
This reverts commit bf4695266bfca8cc21bcf10a3281e874ebce0d27.
The original goal of avoiding C++20 compilation regressions is still
handled through a test in CI.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson adds the current source and build directory to the include path by
default. This causes a namespace clash in tests when using C++20, as the
Span class test is compiled into a binary named 'span', which then gets
included by source code through indirect '#include <span>' directives.
Unsurprisingly, the compiler doesn't react happily when fed binary data.
We could work around the problem by renaming the test executable, but
disabling the implicit inclusion of the local directory is a more
generic solution that will avoid similar issues in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
C++20 deprecates bitwise operations between different enumeration types.
This is a bad practice even in C++17, so enable the deprecation warning.
Doing so ensures no such operations will be added.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Replace the manual CTRL+Q key sequence with QKeySequence::Quit. This
automatically maps to the native shortcut for the quit action,
regardless of the platform. Even though we don't expect qcam to run on
non-Linux platform, using a QKeySequence is still a good practice when
one exists.
This doesn't change qcam's behaviour, as the native quit key sequence is
CTRL+Q on Linux systems.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
uClibc doesn't provide a memfd_create() implementation. Fix it by using
a direct syscall when the function isn't available.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
When the C library doesn't provide local object support, the
utils::strtod() function simply calls strtod() from the C library. The
current implementation does so incorrectly, and calls utils::strtod()
instead, resulting in infinite recursion. Fix it with a proper namespace
qualifier.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Provide the Sony IMX415 camera sensor properties and registration
with libipa for the gain code helpers.
The test patterns exposed by the IMX415 do not map well to the current
set of test pattern controls supplied by libcamera. These are left
intentionally unimplemented.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
C++20 deprecated implicit capture of `this` via `[=]`.
Fix that by explicitly capturing the necessary variables.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide the Sony IMX335 camera sensor properties and registration
with libipa for the gain code helpers.
The test patterns exposed by the IMX335 do not map well to the current
set of test pattern controls supplied by libcamera. These are left
intentionally unimplemented.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide the IMX283 camera sensor properties and registration
with libipa for the gain code helpers.
The test patterns exposed by the IMX283 do not map well to the current
set of test pattern controls supplied by libcamera. These are left
intentionally unimplemented.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
When flush() is called and then a new stream configuration is set, the
descriptors_ queue might have a chance to be not cleared in stop(), as
the Camera is already in Stopped state.
This will prevent further requests from being completed in
sendCaptureResults() as the descriptors_ queue is not empty.
To fix the issue, clear the descriptors_ even if the Camera State is
Stopped. As a drawback the libcamera::Camera::stop() function might be
called twice, but this is allowed by the Camera state machine, and the
second call is guaranteed to be a nop.
Signed-off-by: Anle Pan <anle.pan@nxp.com>
Signed-off-by: Fang Hui <hui.fang@nxp.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are two places where "output" is spelled as "ouput".
Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In the description of DeviceMatch, the word 'appropriate' is
spelled incorrectly as 'appropriare'. Fix it.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera documentation style calls for no period at the end of the
Doxygen one-liner commands (\brief, \param and \return). Extend the
DoxygenFormatter class to drop the period.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It's a good practice to use r'' strings for regular expressions in
Python, to avoid unexpected interaction with string escape sequences.
Use them globally. This allows simplifying escaping in one of the
regular expression strings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Header guards were replaced by pragma once calls with commits
0a64cf8b7645 ("libcamera: Convert to pragma once") through to
796210ecea82 ("v4l2: Convert to pragma once")
Update the coding style to reflect the updated header guard style.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
musl does not implement GNU basename extention and with latest musl
the prototype from string.h is also removed [1] which now results in
compile errors e.g.
../git/utils/ipu3/ipu3-pack.c:21:47: error: call to undeclared function 'basename'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
These utilities are using this function in usage() which is used just
before program exit. Always use the basename APIs from libgen.h which is
posix implementation
[1] https://git.musl-libc.org/cgit/musl/commit/?id=725e17ed6dff4d0cd22487bb64470881e86a92e7
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Black may not be represented as 0 pixel value for given hardware, it may
be higher. If this is not compensated then various problems may occur
such as low contrast or suboptimal exposure.
The black pixel value can be either retrieved from a tuning file for the
given hardware, or automatically on the fly. The former is the right
and correct method, while the latter can be used when a tuning file is
not available for the given hardware. Since there is currently no
support for tuning files in software ISP, the automatic, hardware
independent way, is always used. Support for tuning files should be
added in future but it will require more work than this patch.
The patch looks at the image histogram and assumes that black starts
when pixel values start occurring on the left. A certain amount of the
darkest pixels is ignored; it doesn't matter whether they represent
various kinds of noise or are real, they are better to omit in any case
to make the image looking better. It also doesn't matter whether the
darkest pixels occur around the supposed black level or are spread
between 0 and the black level, the difference is not important.
An arbitrary threshold of 2% darkest pixels is applied; there is no
magic about that value.
The patch assumes that the black values for different colors are the
same and doesn't attempt any other non-primitive enhancements. It
cannot completely replace tuning files and simplicity, while providing
visible benefit, is its goal. Anything more sophisticated is left for
future patches.
A possible cheap enhancement, if needed, could be setting exposure +
gain to minimum values temporarily, before setting the black level. In
theory, the black level should be fixed but it may not be reached in all
images. For this reason, the patch updates black level only if the
observed value is lower than the current one; it should be never
increased.
The purpose of the patch is to compensate for hardware properties.
General image contrast enhancements are out of scope of this patch.
Stats are still gathered as an uncorrected histogram, to avoid any
confusion and to represent the raw image data. Exposure must be
determined after the black level correction -- it has no influence on
the sub-black area and must be correct after applying the black level
correction. The granularity of the histogram is increased from 16 to 64
to provide a better precision (there is no theory behind either of those
numbers).
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a "Software ISP benchmarking" documentation section which describes the
performance/power consumption measurements used during the Software ISP's
development.
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
BGR888 is RGB888 with the red and blue pixels swapped, adjust
the debayering to swap the red and blue pixels in the bayer pattern
to add support for writing formats::BGR888.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard
bayer orders.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for 8, 10 and 12 bpp unpacked bayer input for all 4 standard
bayer orders.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To enable the Simple Soft ISP and Soft IPA for simple pipeline handler
configure the build with:
-Dpipelines=simple -Dipas=simple
Also using the Soft ISP for the particular hardware platform must
be enabled in the supportedDevices[] table. It is currently enabled
for and only for qcom-camss.
If the pipeline uses Converter, Soft ISP and Soft IPA aren't
available.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The converterBuffers_ and the converterQueue_ are not that specific
to the Converter, and could be used by another entity doing the format
conversion.
Rename converterBuffers_, converterQueue_, and useConverter_ to
conversionBuffers_, conversionQueue_ and useConversion_ to
disassociate them from the Converter.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Define the Soft IPA main and event interfaces, add the Soft IPA
implementation.
The current src/ipa/meson.build assumes the IPA name to match the
pipeline name. For this reason "-Dipas=simple" is used for the
Soft IPA module.
Auto exposure/gain and AWB implementation by Dennis, Toon and Martti.
Auto exposure/gain targets a Mean Sample Value of 2.5 following
the MSV calculation algorithm from:
https://www.araa.asn.au/acra/acra2007/papers/paper84final.pdf
Use CameraSensorHelper to convert the analogue gain code read from the
camera sensor into real analogue gain value. In the future this makes
it possible to use faster AE/AGC algorithm. Right now the CameraSensorHelper
lets us use the full range of analogue gain values.
If there is no CameraSensorHelper for the camera sensor in use, a
warning log message is printed.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Marttico <g.martti@gmail.com>
Signed-off-by: Marttico <g.martti@gmail.com>
Co-developed-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add CPU based debayering implementation. This initial implementation
only supports debayering packed 10 bits per pixel bayer data in
the 4 standard bayer orders.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a base class for debayer implementations. This is intended to be
suitable for both GPU (or otherwise) accelerated debayer implementations
as well as CPU based debayering.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a CPU based SwStats implementation for SoftwareISP / SoftIPA use.
This implementation offers a configure function + functions to gather
statistics on a line by line basis. This allows CPU based software
debayering to call into interleave debayering and statistics gathering
on a line by line basis while the input data is still hot in the cache.
This implementation also allows specifying a window over which to gather
statistics instead of processing the whole frame.
Doxygen documentation by Dennis Bonke.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Co-developed-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Co-developed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Co-developed-by: Marttico <g.martti@gmail.com>
Signed-off-by: Marttico <g.martti@gmail.com>
Co-developed-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Toon Langendam <t.langendam@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SharedMemObject class
The SharedMemObject class template contains a fair amount of inline code
that does not depend on the template types T. To avoid duplicating it in
every template specialization, split that code to a separate base
SharedMem class.
We don't define copy semantics for the classes (we don't need one at the
moment) and we make them non-copyable since the default copy constructor
would lead to use-after-unmap.
Doxygen documentation by Dennis Bonke and Andrei Konovalov.
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Co-developed-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Dennis Bonke <admin@dennisbonke.com>
Signed-off-by: Andrei Konovalov <andrey.konovalov.ynk@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The SharedMemObject has been imported directly into the libcamera
internal components. Adapt the SIZE constant of the class to match the
libcamera coding style.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move SharedMemObject class out of RPi namespace and put it into
include/libcamera/internal so that everyone could use it.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an argument to the constructor to specify dma heaps type(s)
to use. Can be DmaHeapFlag::Cma and/or DmaHeapFlag::System.
By default DmaHeapFlag::Cma is used. If both DmaHeapFlag::Cma and
DmaHeapFlag::System are set, CMA heap is tried first.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
DmaHeap class is useful outside the RPi pipeline handler too.
Move dma_heaps.h and dma_heaps.cpp to common directories. Update
the build files and RPi vc4 pipeline handler accordingly.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SimpleCameraConfiguration::validate() adjusts the configuration of its
streams (if the size is not in the outputSizes) to the captureSize. But
the captureSize itself can be not in the outputSizes, and then the
adjusted configuration won't be valid resulting in camera configuration
failure.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # sc8280xp Lenovo x13s
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an async main interface function is defined with no parameters, there
would be a compilation error complaining about an extra comma. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If an event function is defined with no parameters, there would be a
compilation error complaining about unused parameters in the generated
code for the data and dataSize parameters that would normally correspond
to serialized data. Fix this by simply marking the parameters as
maybe_unused.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
