| Age | Commit message (Collapse) | Author |
|---|
|
Sufficient plumbing is added so that the HDR mode control can be used
to engage HDR modes on platforms that support them. On the vc4
platform, this allows multi-channel AGC to run, though there is no
image merging.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The vector in question is destroyed when the item in the `buffers_` map
is destroyed as a result of the `erase()` call. A vector's destructor
already does all the things that `clear()` does,
so calling it earlier is not needed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Python 3.12 starts emitting the following warning when building libcamera:
.../utils/ipc/generators/mojom_libcamera_generator.py:372:
SyntaxWarning: invalid escape sequence '\.'
if not re.match('^ipa\.[0-9A-Za-z_]+', namespace):
`r' prefix is now required before the regexp.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When activating both ISP nodes on the i.MX8MP, but only connecting one
camera sensor, libcamera aborts because it couldn't find the chosen
entity's device node:
[37:54:40.779902250] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media1: rkisp1
[37:54:40.780196750] [3631] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:54:40.780237875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:252 Added device /dev/media0: rkisp1
[37:54:40.780505125] [3631] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:54:40.780599875] [3631] DEBUG DeviceEnumerator device_enumerator.cpp:312 Successful match for media device "rkisp1"
[37:54:40.780731375] [3631] ERROR V4L2 v4l2_device.cpp:93 'rkisp1_isp': Failed to open V4L2 device '': No such file or directory
Fix this by skipping empty device nodes:
[37:49:05.172672000] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media1 found
[37:49:05.172720625] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media1: rkisp1
[37:49:05.172973875] [3603] DEBUG DeviceEnumerator device_enumerator_udev.cpp:322 All dependencies for media device /dev/media0 found
[37:49:05.173012125] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:256 Added device /dev/media0: rkisp1
[37:49:05.173281625] [3603] DEBUG Camera camera_manager.cpp:152 Found registered pipeline handler 'PipelineHandlerRkISP1'
[37:49:05.173376875] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:107 Skip rkisp1_isp: no device node
[37:49:05.173414375] [3603] DEBUG DeviceEnumerator device_enumerator.cpp:316 Successful match for media device "rkisp1"
[37:49:05.173671250] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video1[15:cap]: Opened device platform:rkisp1: rkisp1: rkisp1_stats
[37:49:05.173775125] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video2[16:out]: Opened device platform:rkisp1: rkisp1: rkisp1_params
[37:49:05.173880500] [3603] DEBUG V4L2 v4l2_videodevice.cpp:632 /dev/video0[18:cap]: Opened device platform:rkisp1: rkisp1: rkisp1
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPADataSerializer::deserializer attempts to optimise code paths and
remove potentially unused code where multiple File Descriptors were not
expected to be utilised.
The addition of multiple SharedFD entries in the IPC highlights this as
a bug.
Clean up the conditionals to ensure that all File Descriptors are
correctly deserialized.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=205
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The capture_test.cpp file was added in the source list of meson in the
wrong place. Fix it so the list is alphabetically sorted.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the OV64A40 tuning files for the Arducam Omnivision camera
module to operate on the VC4 ISP architecture on Raspberry Pi 4 and
below.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a CameraSensorHelper for the OV64A40 camera sensor.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the OV64A40 sensor with a camera helper to manage the gain
model, light sensitivity, and control delays.
Signed-off-by: Lee Jackson <lee.jackson@arducam.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry for the Omnivision OV64A40 Sensor which has a square pixel
size of 1.008µ.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement the StatsOutputEnable control for the VC4 IPA. When set,
this outputs the ISP statistics as a uint8_t span through the Bcm2835StatsOutput
metadata control.
To get this working, IpaBase::libcameraMetadata_ is moved from a private
to a protected member variable. This makes it accessable to the VC4
derived IPA class.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ids_rpi.yaml file to hold the Raspberry Pi specific
vendor controls.
Define a control StatsOutputEnable to allow the ISP hardware statistics
to be output through metadata via the Bcm2835StatsOutput control. The
implementation of these controls will follow in a subsequent patch.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously the code would brighten up images in case the Macbeth Chart
is slightly dark, and also zoom in on sections of it to look for
charts occupying less of the field of view. But it would not do both
together.
This change makes the search for smaller charts also repeat that
search for the brightened up images that it made earlier, thereby
increasing the chances of success for non-optimal tuning images.
There are also a couple of very small drive-by typo fixes.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to get reasonable default colour gains before AWB
has run. This is particularly important on the PiSP platform where
these numbers are helpful in programming the Front End statistics
block in advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This allows the IPA to discover the correct black level values even
before any frames have been processed. This is important on the PiSP
platform where the front end black level blocks must be programmed in
advance.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't assert when taking the weighted mean of a zero-width or
zero-weight interval; return its upper bound. That is certainly
correct in the zero-width case, and plausible otherwise.
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The language argument to the code-block directive was mandatory in
Sphinx before 2.0. Fix the few instances where no language is specified
to support older versions of Sphinx.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The gst_clear_event() function used by libcamerasrc has been introduced
in GStreamer 1.16, while libcamera claims to need 1.14 or newer. This
causes a compilation error. Fix it by copying the gst_clear_event()
implementation to gstlibcamera-utils.h when compiling with older
GStreamer version.
The version check makes it clear that the workaround is needed with
older versions only, flagging it for removal when the minimum GStreamer
version requirement will be bumped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
lc-compliance depends on support for skipping tests in gtest (commit
00938b2b228f upstream, merged in v1.10.0). Set the corresponding minimum
version for the gtest dependency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Advertise hardware constraints on the pixel processing rate through the
Controller::HardwareConfig structure. When calculating the minimum line
length during a configure() operation, ensure that we don't exceed this
constraint.
If we do exceed the hardware constraints, increase the modes's minimum
line length so the pixel processing rate falls below the hardware limit.
If this is not possible, throw a loud error message in the logs.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When converting from StreamConfiguration to V4L2DeviceFormat, the stride
was being dropped with the result that users could not request a custom
stride.
Set the stride in the V4L2DeviceFormat to prevent this happening.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When compiling with gcc 8.4.0, the compiler was reported to throw an
unused variable warning:
../src/libcamera/camera.cpp: In member function ‘libcamera::CameraConfiguration::Status libcamera::CameraConfiguration::validateColorSpaces(libcamera::CameraConfiguration::ColorSpaceFlags)’:
../src/libcamera/camera.cpp:497:19: error: unused variable ‘i’ [-Werror=unused-variable]
for (auto [i, cfg] : utils::enumerate(config_)) {
^
The build environment may have been incorrect as the problem couldn't be
reproduced with gcc 8.3.0 and 8.5.0. Nonetheless, the 'i' variable is
indeed unused. It turns out that the code can be simplified, as the
commit that removed usage of the variable kept the now unneeded
utils::enumerate() call.
Simplify the code and fix the warning in one go.
Fixes: 13986d6ce3ab ("libcamera: camera: Fix validateColorSpaces to choose "main" colour space")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Starting with meson 0.59, the custom_target() function substitutes
'@BASENAME@' in the output parameter with the input file name, with the
extension removed. This is exactly what we implement manually when
generating the IPA interface .cpp files.
Furthermore, starting with meson 0.60, the 'name' positional parameter
to the custom_target() function is optional, and defaults to the
basename of the output file (including the extension). This is exactly
the name we compute manually and pass to the function.
As libcamera requires meson 0.60 or newer, we can depend on those two
features and drop manual computation of the base name. This fixes a
warning with recent meson versions that complain that passing a file
object to the format() function is a broken feature:
WARNING: Broken features used:
* 1.3.0: {'str.format: Value other than strings, integers, bools, options, dictionaries and lists thereof.'}
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
lc-compliance requires gtest. When not available on the system, we
install it using a meson wrap, but it is still better to install the
system package. Add it as a dependency in README.rst.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The GStreamer single stream test uses the following pipeline:
libcamerasrc ! videoconvert ! fakesink
The videoconvert element isn't useful as the data is thrown away by the
fakesink anyway. We can shorten the pipeline to
libcamerasrc ! fakesink
to save CPU time and to avoid depending on the gstreamer1.0-plugins-base
package to run the unit tests.
The test could be further simplified by replacing
gst_parse_bin_from_description_full() with gst_element_factory_make(),
now that we only add one element to the bin. The extra cost incurred by
the bin only impacts initialization time, and using a bin will make it
easier to add other elements in the future if needed. Keep the bin, and
only drop the videoconvert element.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When running tests on slower devices, 200ms is too low to wait for the
process to exit. Increase the timeout to 2s.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When running tests on slower devices, 200ms is too low to wait for the
process to exit. Increase the timeout to 2s.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the process fails to run and exit normally, the test prints an
error message that provides little information:
process did not exit normally
Expand the error message to print the exit status to make debugging
easier.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the process fails to exit before the timeout, the
LogProcessTest::exitStatus_ variable gets used uninitialized. Fix it by
initializating to Process::NotExited.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
One of the error paths in the test returns without logging a message,
which makes failures difficult to debug. Fix it by adding an error
message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Meson uses tags to sort installed files in categories, and makes it
possible to install a subset of the files using the '--tags' argument to
'meson install'. This is typically used by distributions to split the
runtime, development and documentation files into separate packages.
By default, meson tries to guess the correct tag for installed files,
but can't always do so properly. Mark the install targets that meson
can't guess with the correct install_tag.
As the feature has been introduced in meson 0.60, bump the minimum meson
version. The latest LTS release of all major distributions that
libcamera currently targets ship a recent enough meson version.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This commit implements renegotiation of the camera configuration and
source pad caps. A renegotiation can happen when a downstream element
decides to change caps or the pipeline is dynamically changed.
To handle a renegotiation the GST_FLOW_NOT_NEGOTIATED return value has
to be handled in GstLibcameraSrcState::processRequest(). Otherwise the
default would be to print an error and stop streaming.
To archive this in a clean way the if statement is altered into a switch
statement which now also has a case for GST_FLOW_NOT_NEGOTIATED. In the
case of GST_FLOW_NOT_NEGOTIATED every source pad is checked for the
reconfiguration flag with gst_pad_needs_reconfigure() which does not
clear this flag. If at least one pad requested a reconfiguration the
function returns without an error and the renegotiation will happen
later in the running task. If no pad requested a reconfiguration then
the function will return with an error.
In gst_libcamera_src_task_run() the source pads are checked for the
reconfigure flag by calling gst_pad_check_reconfigure() and if one pad
returns true and the caps are not sufficient anymore then the
negotiation is triggered. It is fine to trigger the negotiation after
only a single pad returns true for gst_pad_check_reconfigure() because
the reconfigure flags are cleared in the gst_libcamera_src_negotiate()
function.
If any pad requested a reconfiguration the following will happen:
1. The camera is stopped because changing the configuration may not
happen while running.
2. The completedRequests queue will be cleared by calling
GstLibcameraSrcState::clearRequests() because the completed buffers
have the wrong configuration.
3. The new caps are negotiated by calling gst_libcamera_src_negotiate().
When the negotiation fails streaming will stop.
4. The camera is started again.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a clearRequests() function to GstLibcameraSrcState which clears the
GstLibcameraSrcState::completedRequests_ queue.
Use this new function in gst_libcamera_src_task_leave() instead of doing
it manually.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the code which negotiates all the source pad caps into a separate
function called gst_libcamera_src_negotiate(). When the negotiation
fails this function will return false and true otherwise.
Use this function instead of doing the negotiation manually in
gst_libcamera_src_task_enter() and remove the now redundant error
handling code accordingly.
Signed-off-by: Jaslo Ziska <jaslo@ziska.de>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A couple of comments are mis-indented in the gstreamer unit test. Fix
them, and reflow the text while at it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The pycamera option was added at the end of the file, breaking
alphabetical order. Restore it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The Python bindings require the libpython3-dev and pybind11-dev
packages. Document it along the other dependencies in README.rst.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libqt5core5a, libqt5gui5 and libqt5widgets packages are dependencies
of the qtbase5-dev package. There's no need to list them explicitly.
While at it, sort the qcam dependencies alphabetically.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We make a few small improvements to the code:
* The arrayToSet method is prevented from overwriting the end of the
array if there are too many values in the input table. If you supply
a table, it will force you to put the correct number of elements in
it.
* The arrayToSet and setStrength member functions are turned into
static functions. (There may be a different public setStrength
member function in future.)
* When no tables at all are given, the configuration is flagged as
being disabled, so that we can avoid copying tables full of zeroes
around. As a consequence, the pipeline handler too will disable this
hardware block rather than run it needlessly. (Note that the tuning
tool will put in a completely empty "rpi.cac" block if no CAC tuning
images are supplied, benefiting from this behaviour.)
* The initialise member function is removed as it does nothing.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The recent change where time-filtering is done before sorting out the
digital gain means that the target exposure without digital gain is no
longer set, breaking the 'AeLocked' calculation.
We can use the regular (full) target exposure instead.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Fixes: 84b6327789fc ("ipa: rpi: agc: Filter exposures before dealing with digital gain")
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add some documentation to the pipeline handler file describing how to
implement and handle vendor specific controls and properties with a
small example.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Label draft controls and properties through the "draft" vendor tag
and deprecate the existing "draft: true" mechanism. This uses the new
vendor tags mechanism to place draft controls in the same
libcamera::controls::draft namespace and provide a defined control id
range for these controls. This requires moving all draft controls from
control_ids.yaml to control_ids_draft.yaml.
One breaking change in this commit is that draft control ids also move
to the libcamera::controls::draft namespace from the existing
libcamera::controls namespace. This is desirable to avoid API breakages
when adding new libcamera controls. So, for example, the use of
controls::NOISE_REDUCTION_MODE will need to be replaced with
controls::draft::NOISE_REDUCTION_MODE.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new control_ranges.yaml file that is used to reserve control id
ranges/offsets for libcamera and vendor specific controls. This file is
used by the gen-controls.py script to generate control id values for
each control.
Draft controls now have a separate range from core libcamera controls,
breaking the existing numbering behaviour.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add support for using separate YAML files for controls and properties
generation. The mapping of vendor/pipeline handler to control file is
done through the controls_map variable in include/libcamera/meson.build.
This simplifies management of vendor control definitions and avoids
possible merge conflicts when changing the control_ids.yaml file for
core and draft controls. With this change, libcamera and draft controls
and properties files are designated the 'libcamera' vendor tag.
In this change, we also rename control_ids.yaml -> control_ids_core.yaml
and property_ids.yaml -> property_ids_core.yaml to designate these as
core libcamera controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The template file to the gen-controls.py and gen-py-controls.py is now
passed in through the '-t' or '--template' command line argument instead
of being a positional argument. This will allow multiple input files to
be provided to the scripts in a future commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support for vendor-specific controls and properties to libcamera.
The controls/properties are defined by a "vendor" tag in the YAML
control description file, for example:
vendor: rpi
controls:
- MyExampleControl:
type: string
description: |
Test for libcamera vendor-specific controls.
This will now generate a control id in the libcamera::controls::rpi
namespace, ensuring no id conflict between different vendors, core or
draft libcamera controls. Similarly, a ControlIdMap control is generated
in the libcamera::controls::rpi namespace.
A #define LIBCAMERA_HAS_RPI_VENDOR_CONTROLS is also generated to allow
applications to conditionally compile code if the specific vendor
controls are present. For the python bindings, the control is available
with libcamera.controls.rpi.MyExampleControl. The above controls
example applies similarly to properties.
Existing libcamera controls defined in control_ids.yaml are given the
"libcamera" vendor tag.
A new --mode flag is added to gen-controls.py to specify the mode of
operation, either 'controls' or 'properties' to allow the code generator
to correctly set the #define string.
As a drive-by, sort and redefine the output command line argument in
gen-controls.py and gen-py-controls.py to ('--output', '-o') for
consistency.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix -Wdeprecated-this-capture error when building with c++20 by
explicity naming this in the capture.
Signed-off-by: Brett Brotherton <bbrotherton@google.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
reStructuredText requires list items to be indented. Fix the few
offenders in the documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Most of the code examples in README.rst use the code directive, but some
use literal blocks or just quoted paragraphs. Use the code directive for
all code for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that libcamera has an official code of conduct, mention it in the
'contributing' document with a clear indication that all community
members are expected to follow the code of conduct.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
