| Age | Commit message (Collapse) | Author |
|---|
|
The file uses the std::array class but doesn't include the corresponding
header. This breaks compilation with clang and libc++. Fix it.
Fixes: 63c578ed9993 ("libcamera: stream: Add StreamFormats")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that we have V4L2Device and V4L2VideoDevice update the documentation
of the latter to use "video device" every time the term "device" was
used in the V4L2 context.
While at it clean up by removing a stale todo entry.
Documentation only change, no functional changes intended.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2 devices and subdevices share a few common operations,like
opening and closing a device node, and perform IOCTLs on the device.
With the forthcoming introduction of support for V4L2 controls, the
quantity of shared code will increase, as the control support
implementation is identical for the two derived classes.
To maximize code re-use and avoid duplications, provide a V4L2Device
base class which groups the common operations and members.
The newly introduced base class provides methods to open/close a device
node, access the file descriptor, and perform IOCTLs on the device.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation of creating a new V4L2Device base class, rename
V4L2Device to V4L2VideoDevice.
This is a project wide rename without any intended functional change.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Integer options have to use base 10. This isn't user-friendly when
specifying pixel formats. Detect the base automatically to support base
16. As a side effect, integer values starting with 0 will be interpreted
in base 8.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Extend the uvcvideo pipeline with format information and validation. The
format information is gathered by enumerating the v4l2 device. This
enumeration approach is valid for UVC as it has a static and simple
media graph.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new option to the cam tool that prints information about the
configuration supplied by the user. If the option is specified,
information about the configuration is printed after the configuration
has been verified and possibly adjusted by the camera.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use CameraConfiguration::validate() to validate and possibly update the
camera configuration when its prepared.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Most of the camera configuration preparation that is done in the
Capture module is not specific to capturing and could be useful for
other modules. Extract the generic parts to CamApp and do basic
preparation of the configuration before passing it to modules.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that both discrete and range based stream format descriptions
result in good discrete frame sizes. The range based stream formats
needs to be fitted with a table of resolutions inside libcamera so if
that table is updated this test might need to be updated.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow StreamFormats to be associated to a StreamConfiguration. The
intention is that pipeline handlers should associate formats to a
StreamConfiguration when it's created in generateConfiguration().
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a StreamFormats class which describes all the formats supported by a
stream. The object does not collect any information itself but can
simplify user interactions with formats as it's able to translate a
stream format range into a discrete list and a discrete list to a range.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add methods to enumerate pixelformats and frame sizes from a V4L2
device. The interface is similar to how V4L2Subdevice enumerates mbus
codes and frame sizes.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Replace all usage of FormatEnum with ImageFormats and completely
remove FormatEnum which is no longer needed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Align the enumPadSizes() interface and implementation with that of
enumPadCodes(). There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Simplify frame size enumeration by breaking out mbus code enumeration in
a helper, making the code easier to read while also preparing for
enhancing the frame size enumeration. There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new class to hold format information for V4L2 devices and
subdevices. The object describes the relationship between either pixel
formats (V4L2 devices) or media bus codes (V4L2 subdevice) and a list of
image sizes which can be produced with that format.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method to check if a Size can fit inside a SizeRange. When
determining if a size is containable take step values into account if
they are not set to 0.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It's useful to be able to print a string representation of a SizeRange
to the log or console, add a toString() method. While at it turn the
structure into a class as it contains functions as well as data.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The size range described might be subject to certain step
limitations. Make it possible to record this information.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SizeRange can describe a single size where min == max. Add a
constructor to help create such a description.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As camera names can be cumbersome to type, selection of cameras by index
from a list can be useful. Print the list of detected cameras with an
index for each item, and interpret the camera name as an index if it is
a numerical value in the range from 1 to the number of cameras.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a test to verify media bus codes, sizes and resolution retrieval
through the CameraSensor API based on the Sensor A in the vimc pipeline.
Also check that the getFormat() method returns the expected media bus
code and size.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
According to the documentation, the CameraSensor::getFormat() method
should select the first media bus code from the mbusCodes parameter that
is supported by the sensor. However, the current implementation wrongly
selects the first media bus code from the codes supported by the sensor
that is listed in the mbusCodes parameter. This results in the
preference order specified by the caller being ignored. Fix it.
Signed-off-by: Mickael Guene <mickael.guene@st.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the environment variable LIBCAMERA_IPA_MODULE_PATH is not set
utils::secure_getenv() will return a nullptr. Assigning a nullptr to a
std::string is not valid and results in a crash,
terminate called after throwing an instance of 'std::logic_error'
what(): basic_string::_M_construct null not valid
Fix this by operating directly on the returned char array instead of
turning it into a std::string.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state
before sleep") changes the frame rate when capturing from the vimc raw
capture video nodes. The commit changes the frame rate from thousands of
frames per second to to roughly fifty.
The libcamera capture test was written with the assumption that vimc
would keep providing this fast frame rate and ran for a very short time
to decrease the overall run time of tests. This is no longer possible
and the test fails as it can't capture enough frames in its runtime,
increase the runtime to match the new vimc frame rate.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Match the style of the SizeRange() which specifies the hStep and vStep,
and wrap the lines in pairs of min and max values.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix trivial spelling of queueing.
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The PipelineHandler::completeBuffer documentation repeats the word
'request'.
Remove the duplication and reformat the lines to fit.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The cam utility does not terminate correctly if invoked with only
--help. It prints the help information and then segfaults due to the
application incorrectly handling the return value. Fix this by moving
the return code check of the option parsing to main().
Reported-by: Emmanuel Arias <eamanu@eamanu.com>
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The REGISTER_PIPELINE_HANDLER() macro defines and instantiates a
subclass of the PipelineHandlerFactory class that specialises the
virtual create() method. Now that create() does more than just creating
an instance, boilerplate code gets duplicated between different
factories.
Factor out the instance creation code to a new virtual createInstance()
method, and turn create() into a non-virtual method of the base class
that can then be defined in the .cpp file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Three tests {capture,configuration_set,statemachine} override the
CameraTest::init() function, and call it as the first action.
However they were not checking the return value, and each of the tests
will segfault if the VIMC camera is not obtained.
Check the return value of the CameraTest base class initialisation and
return any errors to the test suite if initialisation fails.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To avoid hardcoding a dependency between the source and build
directories, use absolute paths for the Doxygen EXCLUDE files. The build
directory can now be placed in any location, not just a direct
subdirectory of the source directory.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of specifying the link arguments directly, which may be
compiler-specific, use a dependency object provided by find_library().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Make the vimc pipeline handler get the dummy IPA, to show how an IPA can
be acquired by a pipeline handler.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the dummy IPA for testing/sample IPA instead of the earlier test
IPA. Remove the test IPA, and update tests and meson accordingly.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a dummy IPA module.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAManager is a class that will search in given directories for IPA
modules, and will load them into a list. It also provides an interface
for pipeline handlers to acquire an IPA.
A meson build file for the IPAs is added, which also specifies a
hard-coded path for where to load the IPAs from in the installation
directory. More paths can be specified with the environment variable
LIBCAMERA_IPA_MODULE_PATH, with the same syntax as the regular PATH
environment variable. Make the test framework set this environment
variable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method to IPAModule to check if it matches with a given pipeline
handler and pipeline version range.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add functions for loading the IPAInterface factory function from an IPA
module shared object, and for creating an instance of an IPAInterface.
These functions will be used by IPAManager, from which a PipelineHandler
will request an IPAInterface.
Also update meson to add the "-ldl" linker argument, to allow loading of
the factory function from a shared object.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA module API version determines the layout of struct
IPAModuleInfo. If this version number does not match, then it means that
the IPA module information structure can't be interpreted, and the
module can't be used. Validate this version number upon loading the
IPA module info from the IPA shared object.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We need a way to match pipelines with IPA modules, so add fields in
IPAModuleInfo to hold the IPA module API version number, the pipeline
name, and the pipeline version.
The module API version is used to determine the layout of struct
IPAModuleInfo.
Also update IPA module tests and Doxygen accordingly. Doxygen needs to
be updated to accomodate __attribute__((packed)).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In order to match an IPA module with a pipeline handler, the pipeline
handler must have a name. Add a name attribute and getter to
PipelineHandler such that it can automatically be defined by
REGISTER_PIPELINE_HANDLER.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Define an IPAInterface class which will contain an IPA implementation.
The methods that the IPAInterface exposes form the interface to the IPA
implementation, hence the name. IPA module shared objects will implement
this class.
This also means that IPA module shared objects must be implemented in
C++, so remove the C test IPA module.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two operations to set and get format on devices implementing the
V4L2 Metadata Interface, identified by the META_OUTPUT or META_CAPTURE
capabilities.
While at it, sort get/setFormat operations alphabetically and unify
their style (eg. no empty line before ioctl).
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for output devices that expose the META_OUTPUT capabilities.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Update kernel headers to v5.1
The most notable introduction for libcamera is support for
V4L2_BUF_TYPE_META_OUTPUT.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add more structure to main.cpp by breaking up the logic into a CamApp
class. This makes the code easier to read and removes all of the
organically grown global variables.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Reduce the complexity of main.cpp by compartmentalising the capture
logic into its own class. There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Argument name differs from definition and implementation, fix it by
renaming the definition. While at it make the argument const.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
