| Age | Commit message (Collapse) | Author |
|---|
|
To prepare for more widespread use of Python in libcamera, ignore Python
cache and compiled files produced when importing modules directly from
the source tree.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
gcc 7.1 introduced processor-specific ABI breakages related to parameter
passing on ARM platforms. This generates a large number of messages
during compilation with gcc >=7.1 until gcc 9. Silence them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If the camera can not generate a configuration from the requested roles
it returns a nullptr which leads to a nullptr dereference. Fix this by
adding a check that the camera generated a configuration before trying
to access it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the StreamKeyValueParser helper to parse stream configuration from
the command line. This extends qcam to accept role hints and pixel
format in addition to a size.
Currently only one viewfinder stream is supported, add a check to keep
this behavior. Going forward this restriction will be lifted to support
more then one stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the StreamOptionsParser helper to parse stream configuration from
the command line.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Create a new helper class StreamKeyValueParser to parse command line
options describing stream configurations. The goal is to share this new
class between cam and qcam.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend OptionsBase<T> with a public invalidate() method. This allows for
further examination of the options and if found unsuitable be
invalidated. The intended user for this new interface are subclasses of
KeyValueParser.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prepare for sub-classing of the KeyValueParser by making the parse()
method virtual.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When one of the camera is selected and opened from the
"Select Cameras" items list, the entry of the combo-box
in the main-window doesn't update its item index to reflect
the camera which was earlier selected. Fix that.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit introduces no functional changes.
This is required so that the combo-box list can be managed
conveniently from various private functions in subsequent
commit.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2_PIX_FMT_SBGGR10P format was misspecified as
V4L2_PIX_FMT_SBGGR10. Fix it.
Fixes: 00d639d951e7 ("libcamera: formats: Add support for 8-, 10- and 12-bit Bayer formats")
Reported-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add three additional fields to PixelFormatInfo to report the number of
bits per pixel, the colour encoding, and the data packing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add the 8-, 10- and 12-but Bayer formats, in both unpacked and
MIPI-packed variants, to the format tables in PixelFormatInfo and
V4L2PixelFormat.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To prepare for storing more information about pixel formats in
PixelFormatInfo, move the class to formats.cpp and document it. The
pixel formats database is moved to the same file, and a new static
function is added to PixelFormatInfo to retrieve a PixelFormatInfo for a
PixelFormat.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the two big manual switch...case with maps. This should not just
improve efficiency when we will have a larger number of formats, but
also paves the way to storing more format information to create
additional helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the DRM/V4L2 format conversion code from V4L2VideoDevice to
V4L2PixelFormat. This is a more natural home for the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the V4L2PixelFormat class to a new file to prepare for additional
changes that will make it grow. No functional modification is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Commit 7206035ee609 ("libcamera: Regenerate IPA module signatures at
install time") replaced installation of the IPA module signatures with
an install script that signs all modules. While doing so, it
inadvertently also disabled generation of the signature at build time by
default. This breaks running libcamera binaries from the build
directory. Fix it.
Fixes: 7206035ee609 ("libcamera: Regenerate IPA module signatures at install time")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Call realpath() to strip out any levels of indirection required in
referencing the root build directory.
This simplifies the debug output when reporting and parsing paths.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The comments describe functionality before libcameraBuildPath() was
adapted from libcameraPath() to return the root of the build, and
described having to take a relative path.
This is no longer the case, and the comment is inaccurate. Fix it.
Fixes: 1b8ac8473c94 ("libcamera: utils: Adapt libcameraPath to match use cases")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Make the IPAModule class inherit from Loggable to log the IPA module
name in all messages.
Before:
[14:19:55.743795676] [20250] ERROR IPAModule ipa_module.cpp:279 IPA module is not an ELF file
After:
[14:20:22.343795887] [20270] ERROR IPAModule ipa_module.cpp:279 ipa_vimc.so: IPA module is not an ELF file
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The sequence number of captured frames is logged to the console with
padding to 6 characters to increase readability. The output is however
incorrect, as 123 is printed as 00012300000. This is caused by the
auto-space feature of QDebug, which inserts a space after every field.
This doesn't play well with stream format manipulation, as it ends up
padding the automatically inserted space the same way as the previous
argument.
This is a bug in Qt, work around it by formatting the sequence number
manually.
Fixes: 494da4467ddf ("qcam: Use Qt qInfo() and qWarning() logging facilities")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When starting the streaming, it might be that the call
to sensorInfo fails. This does not mean that the camera can't
stream so set 'ret' to 0.
Fixes: fd554f9dba31 ("libcamera: ipa: Add support for CameraSensorInfo")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Improve the pre-push git hook script to reject commits without at least
one Reviewed-by line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Improve the pre-push git hook script to reject commits without the
committer's Signed-off-by line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When the IPA modules are installed, meson strips the DT_RPATH and
DT_RUNPATH from the binaries. This invalidates the signatures. Disable
installation of the .sign files and add an installation script to
regenerate them directly in the target directory. The .sign files still
need to be created at build time to support running IPA modules from the
build tree.
Two alternative approaches have been considered:
- meson could be taught a new target argument to preserve binary
compatibility by skipping any operation that modifies files. This has
been proposed in the #mesonbuild IRC channel. While this could be
interesting in the longer term, we need to fix the issue now.
- The module signatures could be computed on selected sections only.
While skipping the .dynamic section when signing may not cause
security issues, it would make signature generation and verification
more complex, and wasn't deemed worth it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The black levels will be used when saving RAW data in DNG containers.
Four values are reported, one for each channel, in the order R, Gr, Gb
and B. The values are reported as being out of a 16-bit pixel range
(a fully saturated pixel would be 65535), so may need subsequent
re-scaling, depending on use.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for camera sensor information in the libcamera IPA protocol.
Define a new 'struct ipa_sensor_info' structure in the IPA context and
use it to perform translation between the C and the C++ API.
Update the IPAInterface::configure() operation to accept a new
CameraSensorInfo parameter and port all users of that function to
the new interface.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a method to retrieve the CameraSensorInfo to the CameraSensor class.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define a map of static information associated with a media bus code.
Start by reporting the bits-per-pixel for each media bus code defined by
the V4L2 kernel API, to later expand it when necessary.
Add to the V4L2SubdeviceFormat class a method to return the bits per
pixel, retrieved by inspecting the static map of format information.
While at it, remove a rogue map inclusion from header file.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define the CameraSensorInfo structure that reports the current image sensor
configuration.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement V4L2Subdevice::getSelection() to support retrieving selection
rectangles from the V4L2 subdevice.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Expose V4L2Videodevice::setSelection() method and drop
V4L2Videodevice::setCrop() and V4L2Videodevice::setComopse() as wrapping
each target with a single function does not provide any benefit.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Expose V4L2Subdevice::setSelection() method and drop
V4L2Subdevice::setCrop() and V4L2Subdevice::setComopse() as wrapping
each target with a single function does not provide any benefit.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the sensor model to create the camera name. The resulting name
should still be "VIMC Sensor B", but prepares for support of Sensor A.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Verify that the sensor model matches the expected value. The whole model
extraction heuristic isn't fully tested as that would require being able
to inject different entity names. It is still useful as an initial step.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a new model() function to the CameraSensor class to report the
camera sensor model.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2Device::getControls() function takes a ControlList that needs to
be pre-populated with dummy entries for the controls that need to be
read. This is a cumbersome API, especially when reading a single
control. Make it nicer by passing the list of V4L2 controls as a vector
of control IDs, and returning a ControlList.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add two control types to store rectangles and sizes. These will be
useful for the properties related to the pixel array.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make sure we can open the configuration file passed to the init()
function, and return an error otherwise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the vimc IPA dummy configuration file to the IPA init() function.
This will be used by the IPA to validate the init() call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pass the vimc IPA dummy configuration file to the IPA init() function.
This will be used by the IPA to validate the init() call.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The file will be used to test the corresponding APIs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a new IPASettings class to pass IPA initialization settings through
the IPAInterface::init() method. The settings currently only contain the
name of a configuration file, and are expected to be extended later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to provide pipeline handlers with IPA-related helpers on top of
IPAInterface, return the IPAProxy instance from IPAManager::createIPA().
No change is required in the pipeline handlers as the IPAInterface that
was previously returned is implemented by an IPAProxy instance already.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
IPA modules may require configuration files, which may be stored in
different locations in the file system. To standardize file locations
between all IPAs and pipeline handlers, provide a helper function to
locate a configuration file by searching in the following directories:
- All directories specified in the LIBCAMERA_IPA_CONFIG_PATH environment
variable ; or
- In the source tree if libcamera is not installed ; otherwise
- In standard system locations (etc and share directories).
When stored in the source tree, configuration files shall be located in
a 'data' subdirectory of their respective IPA directory.
More locations, or extensions to the mechanism, may be implemented
later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The iostream header isn't needed. Drop it.
Fixes: c2a8217df54c ("libcamera: add IPA proxy")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The message printed when loading a proxy worker from the build directory
is missing a space. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Similarly to libcameraBuildPath(), there's a need to locate resources
within the source tree when running libcamera without installing it.
Support this use case with a new utils::libcameraSourcePath() function.
The implementation uses a symlink from the build root to the source root
in order to avoid hardcoding the path to the source root in the
libcamera.so binary.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IPAModuleInfo::name field is currently a free-formed string that has
little use. Tighten its usage rules to make it suitable for building
file system paths to IPA-specific resources by matching the directory
name of the IPA module.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
