| Age | Commit message (Collapse) | Author |
|---|
|
Put the inclusion of geometry.h to the right place.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The includes that are not used can be removed. Also, some directly used
includes not listed are added.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The includes that are not used can be removed and there are also
directly used includes not listed. Let's fix both.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The includes that are not used can be removed. And two identified
missing includes (directly used but available only through other
includes) are added.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The LSP autoformatter doesn't like some of the current formatting, let's
make it happier. Note that not all of its suggestions were accepted
because readability is preferred and adjusting .clang-format may not be
easy or possible.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The includes that are not used can be removed.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The LSP autoformatter doesn't like some of the current formatting, let's
make it happier. Note that not all of its suggestions were accepted
because readability is preferred and adjusting .clang-format may not be
easy or possible.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
v4l2_videodevice.h is not used but logging is imported through it.
Remove the unused include and include log.h instead.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The includes that are not used can be removed.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
generated_serializer_test.cpp uses iostream without including it,
relying on imports from another included header. Let's include iostream
there.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The uvcvideo pipeline handler always keeps the uvcvideo /dev/video# node
for a pipeline open after enumerating the camera.
This is a problem for uvcvideo, as keeping the /dev/video# node open
stops the underlying USB device and the USB bus controller from being
able to enter runtime-suspend causing significant unnecessary
power-usage.
Implement acquireDevice() + releaseDevice(), openening /dev/video# on
acquire and closing it on release to fix this.
And make validate do a local video_->open() + close() around validate()
when not open yet, to keep validate() working on unacquired cameras.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=168
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The uvcvideo driver needs to open / close its /dev/video# node from
pipe_->acquireDevices() / pipe_->releaseDevices().
V4L2VideoDevice::open() creates an EventNotifier and this notifier needs
to be created from the CameraManager thread.
Use invokeMethod() for pipe_->acquire() and pipe_->release() so that the
EventNotifiers are created from the CameraManager thread context.
Running pipe_->acquire() and pipe_->release() from the CameraManager
thread context serializes all calls to them. Drop PipelineHandler::lock_
this now is no longer necessary and update the "\context" part of the
documentation for acquire[Device]() and release[Device]() to match.
Note the delayed opening of /dev/video# is a special case because the
kernel uvcvideo driver powers on the USB device as soon as /dev/video#
is opened. This behavior should *not* be copied by other pipeline
handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera always keeps all /dev/video# and /dev/v4l2_subdev# nodes for a
pipeline open after enumerating the camera.
This is a problem for the uvcvideo pipeline handler. Keeping /dev/video#
open stops the UVC USB device from being able to enter runtime-suspend
causing significant unnecessary power-usage.
Add a stub acquireDevice() function to the PipelineHandler class which
pipeline handlers can override.
The uvcvideo pipeline handler will use this to delay opening /dev/video#
until the device is acquired. This is a special case because the kernel
uvcvideo driver powers on the USB device as soon as /dev/video# is
opened. This behavior should *not* be copied by other pipeline handlers.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the RkISP1 BLC algorithm to use the ISP 'companding' block for
versions of the ISP (such as the one on the i.MX8MP) that lack the
dedicated BLS block but implement BLS as part of the companding block.
As access to the companding block requires the extensible parameters
format, disable BLC when using the legacy parameters format on i.MX8MP
to avoid crashes at runtime with older kernels.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Add a compand feature flag to the hardware settings section of the IPA
context, so that we can act accordingly for black level subtraction, and
to pave the way to skipping companding appropriately when support for it
is added.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Extend the RkISP1 parameters helper with support for the new companding
blocks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Now that the IPA module supports the extensible parameters format,
switch to it when available. If the kernel driver doesn't support the
new format, setFormat() will adjust paramFormat to the legacy format,
which will be passed to the IPA module, preserving backward
compatibility.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Use the new ISP parameters abstraction class RkISP1Params to access the
ISP parameters in the IPA algorithms. The class replaces the pointer to
the rkisp1_params_cfg structure passed to the algorithms' prepare()
function, and is used to access individual parameters blocks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
Individual algorithms of the rkisp1 IPA module access their
corresponding ISP parameters through the top-level structure
rkisp1_params_cfg. This will not work anymore with the new parameters
format. In order to ease the transition to the new format, abstract the
ISP parameters in a new RkISP1Params class that offers the same
interface regardless of the format.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The ISP parameters buffer currently has a fixed payload size, which is
hardcoded in the pipeline handler. To prepare for support of the
extensible parameters format that has a variable payload size, pass the
size from the IPA module to the pipeline handler explicitly. Keep the
size hardcoded to sizeof(struct rkisp1_params_cfg) for now, this will be
udpated later.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The rkisp1 driver supports two formats for the ISP parameters buffer,
the legacy fixed format and the new extensible format. In preparation of
support for the new format, pass the parameters buffer format from the
pipeline handler to the IPA module and store it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Update the kernel headers with the definitions for the rkisp1 extensible
parameters format.
The headers have been generated from the most recent linux-media stage
tree master branch, at commit a043ea54bbb9 ("Merge tag
'next-media-rkisp1-20240814' of
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git").
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
When given a relative path to the kernel git tree,
update-kernel-headers.sh fails to execute the headers_install.sh script
from the kernel sources. Fix it by turning the kernel directory into an
absolute path.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The links on the API reference mainpage to guides within the main
libcamera documentation work built locally, but not through the
website. As the website's more important make them work with the
website paths as a temporary solution until a better one is devised.
Fixes: e93886178106 ("Documentation: Improve doxygen main page")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the removal of guides/introduction.rst the link on the API
reference landing page no longer works. Point it to the documents
introduction page instead.
Fixes: 860a3e30319c ("Documentation: Rework docs.rst into introduction.rst")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
EV = [-2, -1, 0.5, 0, 0.5, 1, 2]
should change to
EV = [-2, -1, -0.5, 0, 0.5, 1, 2]
Signed-off-by: Fang Hui <hui.fang@nxp.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is better / more logical to call releaseDevice() before unlocking the
devices. At the moment the only pipeline handler implementing
releaseDevice() is the rpi pipeline handler which releases buffers from
its releaseDevice() implementation.
Releasing buffers before unlocking the media devices is ok to do
and arguably it is better to release the buffers before unlocking.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
PipelineHandler::acquire() only locks the media devices when the first
camera is acquired. If a second camera of a pipeline is acquired only
useCount_ is increased and nothing else is done.
When releasing cameras PipelineHandler::release() should only unlock
the media devices when the last camera is released. But the old code
unlocked on every release().
Fix PipelineHandler::release() to only release the media devices when
the last camera is released.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The introduction.rst file contains the introduction to the libcamera
documentation. Rename the section from "Documentation" to
"Introduction".
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
The local table of contents from the introduction page doesn't provide
much navigation value as the page is short. It also stands out, as no
other page has a local table of contents. Drop it, we will reintroduce
local tables of contents more globally if needed later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
"API" as a section name is as informative as it is long, that is to say,
not very. Rename it to "API Reference" for improved clarity.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Now that documentation_contents.rst serves as a navbar for the docs
pages on the website, reformat it to present the links in a more
logical order. The list is split into three sections for Users,
Developers and System Integrators, with a slight break between
each section and a header above the links.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Mimicking the existing api-html placeholder, add a placeholder for the
internal version of the Doxygen generated API documentation so that the
website can generate hyperlinks to it properly.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
index.rst is the page that becomes index.html, but currently just has
some blurb. Although this page will only be seen if viewing the docs
as built from the libcamera tree it'd be better if it were more of an
introductory page. Include the content of docs.rst to improve it. As
we're no longer including the content from README.rst the labels that
enabled that can be dropped.
With this change whether viewing the documentation as built in the
libcamera tree or on the Docs page of the website, the landing content
will be the same.
The CSS for the documentation's theme currently hides the toctree from
the generated body in html, as it's already displayed on every page via
the theme's CSS. This change reorders the page such that the CSS that
hides the toctree no longer works - update the CSS to retain the
current behaviour.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
docs.rst is the landing page for the documentation from the libcamera
website, but isn't particularly introductory. Move much of the content
from guides/introduction.rst to docs.rst, which will serve as the new
introductory page. Remove guides/introduction.rst.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera Architecture section of the introduction is largely a
duplicate of the section broken out from docs.rst. Remove it from the
introduction.rst file and consolidate anything that wasn't duplicated
into libcamera_architecture.rst and feature_requirements.rst. Take the
opportunity to also expand the list of Platform Support which is now a
bit out of date.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In preparation for including more of the Documentation for libcamera
on the website, break out the libcamera Architecture and Feature
Requirements sections of docs.rst file into separate files for each
section. Add all of the new files to documentation-contents.rst so
they're included on the website too.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There are two near-duplicate instances of the camera stack details
in the Documentation, in docs.rst and guides/introduction.rst. Remove
them from guides/introduction.rst, with the exception of the
explanations of the V4L2 Compatibility Layer and the Android HAL
which are moved to the Camera Stack section in docs.rst. The Docs
page already had its own separate version of those details but they
are distinct and seemingly out of date - remove them.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the exception of the initial group of four links, alphabetise
the pages in the Documentation toctree so adding new ones can be
done in a defined order.
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new .rst file referencing the documentation contents. This file
is then included in each documentation page so that we can enhance
the Documentation pages on the libcamera website using it. As we do
not want the appearance of the libcamera in-tree Documentation to
change just yet, disable the new class using the sphinx theme's CSS.
To facilitate easier distinguishing between "normal" and
documentation pages on the website we want to add a "documentation"
class to the content of all such pages. Since this new file will be
included on each documentation page it is convenient to add the new
directive here - do so. As the website uses different CSS to
libcamera, move the contents on docs.rst a little so that the
directive at the end of the contents block applies correctly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The control descriptions from YAML files are extracted to generate
Doxygen documentation blocks for the controls, which are then compiled
to HTML. The extraction script uses the first line of the description
as the Doxygen \brief, and preserves blank lines to keep paragraphs.
The control descriptions in the YAML files have however not all been
written with this in mind. Many description elements are not formatted
as block string scalars, in the first place, so blank lines are lost
when parsing YAML. Furthermore, they often start with a long initial
paragraph, making the \brief description very long.
Improve the documentation formatting by marking all multiline
descriptions as block string scalars, and try to provide a short
one-line first paragraph to be used as a \brief. While at it, reflow the
documentation to the 80 columns limit.
The draft controls are left as-is, as they should evolve to non-draft
controls eventually (and ideally sooner than later).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Jinja2 templates help separate the logic related to the template from
the generation of the data. The python code becomes much clearer as a
result.
As an added bonus, we can use a single template file for both controls
and properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Replace manual extraction of data from YAML with the Control helper
class. This centralizes YAML parsing and avoids manual mistakes.
In order to import the controls module, add the utils/codegen/ directory
to the PYTHONPATH through the Python build environment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The ControlEnum and Control helper classes defined in gen-controls.py
are useful for other generator scripts. Move them to a separate file to
make it possible to share them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Jinja2 templates help separate the logic related to the template from
the generation of the data. The python code becomes much clearer as a
result.
As an added bonus, we can use a single template file for both controls
and properties.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The libcamera.h header is a top-level library header that contains every
other libcamera header. It is currently generated by listing the files
in include/libcamera/ and dropping the .in suffix from template files.
This assumes a 1:1 mapping between generated header file names and the
name of their templates.
Drop that assumption and base the libcamera.h generation on the
libcamera public headers listed in meson.build. This makes the
libcamera.h header generation more future-proof.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Python scripts run as part of the build process need to take a few
actions specific to the environment in which they operate. One of those
is disabling the Python bytecode cache, to avoid writing .pyc files to
the source tree. This is done manually in the IPC generate.py and
parser.py scripts.
The current implementation is not ideal because it hardcodes in the
scripts information related to the environment in which they operate. As
those scripts are part of libcamera this is more of a theoretical issue
than a practical one. A second issue is that future Python scripts will
need to duplicate similar mechanisms, resulting in a higher maintenance
burden.
Address the issue with a different approach, by creating a meson
environment for the Python scripts, and passing it to the
custom_target() functions. The environment only disables the bytecode
cache for now.
The diffstat shows an increase in code size. This is expected to be
offset by usage of the environment for more Python scripts, as well as
support of more variables in the environment.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
We have multiple code generation scripts in utils/, mixed with other
miscellaneous utilities, as well as a larger code base based on mojom in
utils/ipc/. To make code sharing easier between the generator scripts,
without creating a mess in the utils/ directory, move all the code
generation code to utils/codegen/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Commit 829acb3ab0b1 ("libcamera: Drop file name from header comment
blocks in templates") dropped file names from header comment blocks in
templates, but forgot the control and property .cpp templates. Fix it.
Fixes: 829acb3ab0b1 ("libcamera: Drop file name from header comment blocks in templates")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The header for controls and properties are generated from the
control_ids.h.in and property_ids.h.in templates respectively, and the
generated files are named control_ids.h and property_ids.h.
For sources, the templates are named control_ids.cpp.in and
property_ids.cpp.in, but the output files are named controls_ids.cpp and
properties_ids.cpp. This discrepancy causes confusion. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
