summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-08-19ipa: Use FileDescriptor instead of int in layers above IPC payloadPaul Elder
Regarding (de)serialization in isolated IPA calls, we have four layers: - struct - byte vector + fd vector - IPCMessage - IPC payload The proxy handles the upper three layers (with help from the IPADataSerializer), and passes an IPCMessage to the IPC mechanism (implemented as an IPCPipe), which sends an IPC payload to its worker counterpart. When a FileDescriptor is involved, previously it was only a FileDescriptor in the first layer; in the lower three it was an int. To reduce the risk of potential fd leaks in the future, keep the FileDescriptor as-is throughout the upper three layers. Only the IPC mechanism will deal with ints, if it so wishes, when it does the actual IPC. IPCPipeUnixSocket does deal with ints for sending fds, so the conversion between IPCMessage and IPCUnixSocket::Payload converts between FileDescriptor and int. Additionally, change the data portion of the serialized form of FileDescriptor to a 32-bit unsigned integer, for alightnment purposes and in preparation for conversion to an index into the fd array. Also update the deserializer of FrameBuffer::Plane accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-19test: camera: Camera reconfiguration and fd-leak testUmang Jain
Development and usage of isolated IPA's has identified bugs in the transmission of the file descriptors between the pipeline handler and the IPA through. Add tests to identify these bugs and prevent regressions. This tests basically checks for two things: - Camera reconfigurations without stopping CameraManager - Fd leaks across IPA IPC boundary [1] Currently, it uses vimc, but can be easily changed to using another platform (for e.g. IPU3) by changing kCamId_ and kIpaProxyName_. The test performs kNumOfReconfigures_ (currently set to 10) reconfigurations of the camera. Each reconfiguration runs start(), capture(100ms), stop() of the camera. Hence, the test runs approximately for 1 second. For checking the fd leaks, the test monitors the /proc/$PROXY_PID/fd directory for open fds. It compares the number of open fds after each run to the number of open fds before the first run. If those two are found to be mis-matched, the test shall report failure. The test validates IPA IPC code paths which are used when the IPA is run in isolated mode. The CameraTest is constructed with the isolate flag set to enforce this. [1] https://bugs.libcamera.org/show_bug.cgi?id=63 Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-19libtest: camera_test: Plumb constructor to set LIBCAMERA_IPA_FORCE_ISOLATIONUmang Jain
Some tests might require to have LIBCAMERA_IPA_FORCE_ISOLATION set to ensure they can test the IPA running in isolated mode. These tests are likely to leverage CameraTest. The environment variable should be set before CameraManager::start() call which happens in CameraTest's constructor. Hence, plumb the constructor with a flag so that the LIBCAMERA_IPA_FORCE_ISOLATION can be set before CameraManager::start(). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-18utils: ipc: ipa_proxy_worker: Log IPCUnixSocket::send() failuresLaurent Pinchart
The IPCUnixSocket::send() function may fail, in which case it can be useful for debugging to log an error message that tells which event was affected. Do so. Reported-by: Coverity CID=35483[6-9] Reported-by: Coverity CID=35484[01] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17ipa: raspberrypi: Fix bcm2835-isp inclusion type.Kieran Bingham
The bcm2835-isp.h is included with quotes rather than angle brackets. Quoted includes is reserved for internal includes, while the linux/bcm2835-isp.h header is exported from the Linux kernel. Fix the inclusion type. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17pipeline: ipu3: Skip recording timestamp for cancelled buffersUmang Jain
There is no point in recording sensor's timestamp when V4L2VideoDevice has marked the frame buffers with FrameMetadata::FrameCancelled (happens when the streams are stopped). The metadata is mostly invalid for cancelled buffers hence, setting timestamp on invalid metadata does not make sense (however some metadata can be considered valid for e.g. returning cause of failure through metadata on cancelled buffers). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-17libcamera: pipeline: Cast to derived pipeline handler with helpersLaurent Pinchart
Replace manual static casts from the PipelineHandler pointer to a derived class pointer with helper functions in the camera data classes. This simplifies code accessing the pipeline from the camera data. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-17libcamera: pipeline_handler: Drop controls() and properties() functionsLaurent Pinchart
The PipelineHandler controls() and properties() functions are only used by the Camera class. Now that the controls and properties are stored in the Camera::Private class, we can drop those functions and access the private data directly in Camera::controls() and Camera::properties(). Suggested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17Documentation: guides: pipeline-handler: Migrate to Camera::PrivateLaurent Pinchart
Update the pipeline handler guide following the migration from the CameraData class to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline_handler: Drop CameraData classLaurent Pinchart
The CameraData class isn't used anymore. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: ipu3: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: raspberrypi: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: rkisp1: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-17libcamera: pipeline: vimc: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: pipeline: uvcvideo: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: pipeline: simple: Migrate to Camera::PrivateLaurent Pinchart
As part of the effort to remove the CameraData class, migrate the pipeline handler-specific camera data from CameraData to the Camera::Private class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16libcamera: camera: Fix minor issues in Camera::Private documentationLaurent Pinchart
Improve the Camera::Private documentation by fixing minor spelling or style issues. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16libcamera: pipeline_handler: Move CameraData members to Camera::PrivateLaurent Pinchart
With pipeline handlers now being able to subclass Camera::Private, start the migration from CameraData to Camera::Private by moving the members of the base CameraData class. The controlInfo_, properties_ and pipe_ members are duplicated for now, to allow migrating pipeline handlers one by one. The Camera::Private class is now properly documented, don't exclude it from documentation generation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: camera: Pass Private pointer to Camera constructorLaurent Pinchart
In order to allow subclassing Camera::Private in pipeline handlers, pass the pointer to the private data to the Camera constructor, and to the Camera::createCamera() function. The Camera::Private id_ and streams_ members now need to be initialized by the Camera constructor instead of the Camera::Private constructor, to allow storage of the streams in a pipeline handler-specific subclass of Camera::Private. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16libcamera: base: extensible: Pass private pointer as unique_ptr<>Laurent Pinchart
The Extensible constructor takes a pointer to a Private instance, whose lifetime it then manages. Make this explicit in the API by passing the pointer as a std::unique_ptr<Private>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-08-16pipeline: vimc: Force complete of request on cancelled buffersUmang Jain
When the stream is stopped, the V4L2VideoDevice sends back all the queued buffers with FrameMetadata::FrameCancelled status. It is the responsibility of the pipeline handler to handle these buffers with FrameMetadata::FrameCancelled. VIMC is currently missing this handling path. As the FrameMetadata::FrameCancelled is set when the stream is stopped, we can be sure that no more queued and re-use of request shall happen. Hence, cancel all the requests' buffers force a complete with completeBuffer(). The issue is caught by the gstreamer_single_stream_test.cpp running with vimc. During the check with meson built-in option '-Db_sanitize=address,undefined' it was observed: ==118003==ERROR: AddressSanitizer: heap-use-after-free on address 0x60e000037108 at pc 0x7f225160c9ac bp 0x7f224a47b620 sp 0x7f224a47b618 READ of size 4 at 0x60e000037108 thread T1 #0 0x7f225160c9ab in libcamera::Request::sequence() const ../include/libcamera/request.h:55 #1 0x7f22518297aa in libcamera::VimcCameraData::bufferReady(libcamera::FrameBuffer*) ../src/libcamera/pipeline/vimc/vimc.cpp:577 #2 0x7f225183b1ef in libcamera::BoundMethodMember<libcamera::VimcCameraData, void, libcamera::FrameBuffer*>::activate(libcamera::FrameBuffer*, bool) ../include/libcamera/base/bound_method.h:194 #3 0x7f22515cc91f in libcamera::Signal<libcamera::FrameBuffer*>::emit(libcamera::FrameBuffer*) ../include/libcamera/base/signal.h:126 #4 0x7f22515c3305 in libcamera::V4L2VideoDevice::streamOff() ../src/libcamera/v4l2_videodevice.cpp:1605 #5 0x7f225181f345 in libcamera::PipelineHandlerVimc::stop(libcamera::Camera*) ../src/libcamera/pipeline/vimc/vimc.cpp:365 The VimcCameraData::bufferReady seems to emit even after the stream is stopped. It's primarily due to vimc's lack of handling FrameMetadata::FrameCancelled in its pipeline handler. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-16ipa: vimc: Send and retrieve FrameBuffers from IPAUmang Jain
Plumb through VIMC mojo interface to enable buffers passing. VIMC does not have parameters or statistics buffers but we can mimick the typical case of passing IPA buffers from pipeline handler to IPA using mock buffers. The mock IPA buffers are FrameBuffers which are dmabuf backed (in other words, mmap()able through MappedFramebuffer inside the IPA). This commits shows: - Passing the parameter buffer from the pipeline handler to the IPA through functions defined in mojom interface. - Passing request controls ControlList to the IPA. Any tests using VIMC will now loop in the IPA paths. Any tests running in isolated mode will help us to test IPA IPC code paths especially around (de)serialization of data passing from pipeline handlers to the IPA. Future IPA interface tests can simply extend the vimc mojom interface to achieve/test a specific use case as required. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-16ipa: vimc: Map and unmap buffersUmang Jain
VIMC pipeline handler has dmabuf-backed mock FrameBuffers which are specifically targetted mimicking IPA buffers (parameter and statistics). Map these mock buffers to the VIMC IPA that would enable exercising IPA IPC code paths. This will provide leverage to our test suite to test IPA IPC code paths, which are common to various platforms. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-16pipeline: vimc: Allocate mock IPA buffersUmang Jain
VIMC is a virtual test driver that doesn't have statistics or parameters buffers that are typically passed from a pipeline handler to its platform IPA. To increase the test coverage going forward, we can at least mimick the typical interaction of how a pipeline handler and IPA interact, and use it to increase the test coverage. Hence, create simple (single plane) dmabuf-backed FrameBuffers, which can act as mock IPA buffers and can be memory mapped (mmap) to VIMC IPA. To create these buffers, temporarily hijack the output video node and configure it with a V4L2DeviceFormat. Buffers then can be exported from the output video node using V4L2VideoDevice::exportBuffers(). These buffers will be mimicked as IPA buffers in subsequent commits. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-16ipa: vimc: Add configure() functionLaurent Pinchart
As part of an effort to make the vimc IPA usable for testing, extend it with a configure function. The configuration is currently ignored by the IPA. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-14test: gstreamer: Add test for gstreamer single streamVedant Paranjape
This patch adds a test to test if single stream using libcamera's gstreamer element works. We need to work around two distinct issues with ASan when enabled in the build: - glib has a known leak at initialization time. This is covered by the suppression file shipped with glib, but it's not clear how to use it automatically. For now, disable leak detection to avoid test failures. - GStreamer spawns a child process to scan plugins. If GStreamer is compiled without ASan (which is likely) but libcamera is, dlopen()ing the libcamera plugin will cause an ASan link order verification failure. Disable the verification child processes to work around the problem. This requires gcc 8 or newer. Signed-off-by: Vedant Paranjape <vedantparanjape160201@gmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-14raspberrypi: ipa: Add tuning files for "NOIR" ov5647, imx219, imx477 modulesDavid Plowman
"NOIR" modules are ones that have had the IR filters removed but are otherwise identical. The same tuning can be used as for the regular version except that the colour calibration supplied to the AWB algorithm no longer works. Instead we need to switch the algorithm to its basic "grey world" method. Users with "NOIR" modules can switch to the matching "xxx_noir.json" tuning file by using the LIBCAMERA_RPI_TUNING_FILE environment variable. Signed-off-by: David Plowman <david.plowman@raspberypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12ipa: ipu3: Tidy-up includesJacopo Mondi
Tidy-up a bit the inclusions directive in the IPU3 IPA module. In detail: - ipu3.cpp is missing inclusions for: std::abs from <cmath> std::map from <map> std::min/max from <algorithm> std::numeric_limits from <limits> std::unique_ptr from <memory> std::vector from <vector> and does not require <sys/mman.h> - ipu3_agc has two not used inclusions in the header file and one the cpp file and is missing <chrono> for std::literals::chrono_literals - ipu3_awb is missing <algorithm> for std::sort and does not use <numeric> or <unordered_map> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-12libcamera: ipu3: Initialize controls in the IPAJacopo Mondi
All the IPU3 Camera controls are currently initialized by the pipeline handler which initializes them using the camera sensor configuration and platform specific requirements. However, some controls are better initialized by the IPA, which might, in example, cap the exposure times and frame duration to the constraints of its algorithms implementation. Also, moving forward, the IPA should register controls to report its capabilities, in example the ability to enable/disable 3A algorithms on request. Move the existing controls initialization to the IPA, by providing the sensor configuration and its controls to the IPU3IPA::init() function, which initializes controls and returns them to the pipeline through an output parameter. The existing controls initialization has been copied verbatim from the pipeline handler to the IPA, if not a for few line breaks adjustments and the resulting Camera controls values are not changed. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-12libcamera: controls: Use ControlIdMap in deserializationJacopo Mondi
Introduce a new field in the controls serialization protocol to allow discerning which ControlIdMap a ControlInfoMap refers to. The newly introduced IdMapType enumeration describes the possible info maps: - Either the globally available controls::controls and properties::properties maps, which are valid across IPC boundaries - A ControlIdMap created locally by the V4L2 device, which is not valid across the IPC boundaries At de-serialization time the idMapType field is inspected and - If the idmap is a globally defined one, there's no need to create new ControlId instances when populating the de-serialized ControlInfoMap. Use the globally available map to retrieve the ControlId reference and use it. - If the idmap is a map only available locally, create a new ControlId as it used to happen before this patch. As a direct consequence, this change allows us to perform lookup by ControlId reference on de-serialized ControlIdMap that refers to the libcamera defined controls::controls and properties::properties. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12test: control serialization: Test lookup by ControlIdJacopo Mondi
Test that lookup by ControlId reference works in the control serialization test making sure that the control limits are not changed by de-serialization. The test currently fails and demonstates that lookup by ControlId is currently not supported until the introduction of the next patch. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-12libcamera: controls: Create ControlInfoMap with ControlIdMapJacopo Mondi
ControlInfoMap does not have a ControlId map associated, but rather creates one with the generateIdMap() function at creation time. As a consequence, when in the need to de-serialize a ControlInfoMap all the ControlId it contains are created by the deserializer instance, not being able to discern if the controls the ControlIdMap refers to are the global libcamera controls (and properties) or instances local to the V4L2 device that has first initialized the controls. As a consequence the ControlId stored in a de-serialized map will always be newly created entities, preventing lookup by ControlId reference on a de-serialized ControlInfoMap. In order to make it possible to use globally available ControlId instances whenever possible, create ControlInfoMap with a reference to an externally allocated ControlIdMap instead of generating one internally. As a consequence the class constructors take and additional argument, which might be not pleasant to type in, but enforces the concepts that ControlInfoMap should be created with controls part of the same id map. As the ControlIdMap the ControlInfoMap refers to needs to be allocated externally: - Use the globally available controls::controls (or properties::properties) id map when referring to libcamera controls - The V4L2 device that creates ControlInfoMap by parsing the device's controls has to allocate a ControlIdMap - The ControlSerializer that de-serializes a ControlInfoMap has to create and store the ControlIdMap the de-serialized info map refers to Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-11clang-format: Regroup sort ordersKieran Bingham
Utilise the clang-format header sort to provide a regex based pattern match for our header inclusion coding style. The rules are updated to match as closely as possible the existing practices and the documentation is updated accordingly. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-10libcamera: MappedFrameBuffer: Print errno on mmap() failureUmang Jain
In mmap() error handling path, errno is stored but never printed in the error log. Print it. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-10libcamera: MappedFrameBuffer: Use typed Flags<MapModes>Kieran Bingham
Remove the need for callers to reference PROT_READ/PROT_WRITE directly from <sys/mman.h> by instead exposing the Read/Write mapping options as flags from the MappedFrameBuffer class itself. While here, introduce the <stdint.h> header which is required for the uint8_t as part of the Plane. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-10libcamera: Give MappedFrameBuffer its own implementationKieran Bingham
The MappedFrameBuffer is a convenience feature which sits on top of the FrameBuffer and facilitates mapping it to CPU accessible memory with mmap. This implementation is internal and currently sits in the same internal files as the internal FrameBuffer, thus exposing those internals to users of the MappedFramebuffer implementation. Move the MappedFrameBuffer and MappedBuffer implementation to its own implementation files, and fix the sources throughout to use that accordingly. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-10src: Remove all unused sys/mman.h inclusionsKieran Bingham
Remove leftover inclusions of the sys/mman header file. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-09libcamera: Rename 'method' to 'function'Laurent Pinchart
Usage of 'method' to refer to member functions comes from Java. The C++ standard uses the term 'function' only. Replace 'method' with 'function' or 'member function' through the whole code base and documentation. While at it, fix two typos (s/backeng/backend/). The BoundMethod and Object::invokeMethod() are left as-is here, and will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-09ipu3: Disallow raw only camera configurationUmang Jain
To capture raw frames, the ImgU isn't needed. However, to implement auto-exposure, we do need to configure the IPA since it shall setup the sensor controls (exposure, vblank and so on) for the capture. One cannot simply configure the IPA, without the ImgU as the parameters and statistics buffer passed to the IPA are actually managed by the ImgU. Until we prepare and setup the ImgU to run an internal queue for raw-only camera configuration, disallow this configuration and report it as invalid. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-06android: mm: cros_camera_buffer: Fix unused parameterHirokazu Honda
cameraBuffer function in private constructor is unused. Mark it as such. Fixes: 33dd4fab9d39("libcamera: base: class: Don't pass Extensible pointer to Private constructor") Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-06android: camera_device: Propagate the requested test pattern modeHirokazu Honda
Propagate the requested test pattern mode to libcamera::Camera through libcamera::Request and also set the android metadata to the test pattern mode contained by the complete Request. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05ipa: raspberrypi: AGC: handle modes with different sensitivitiesDavid Plowman
When the sensor is switched to a mode with a different sensitivity, the target exposure values need to be adjusted proportionately to maintain the same image brightness. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05ipa: raspberrypi: Add sensitivity field to camera modeDavid Plowman
We use the CamHelper class to initialise it to the usual value of 1. The CamHelper's GetModeSensitivity method can be redefined to implement a different behaviour for sensors that require it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05cam: Add support for viewfinder through DRM/KMSLaurent Pinchart
Use the KMSSink class to display the viewfinder stream, if any, through DRM/KMS. The output connector is selected through the new -D/--display argument. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05cam: kms_sink: Enable display on first frameLaurent Pinchart
Not all display controllers support enabling the display without any active plane. Delay display enabling to the first frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05cam: Add KMS sink classLaurent Pinchart
Add a KMSSink class to display framebuffers through the DRM/KMS API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05cam: Add DRM helper classesLaurent Pinchart
To prepare for viewfinder operation through the DRM/KMS API, add a set of helper classes that encapsulate the libdrm functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-08-05cam: Rename BufferWriter to FileSinkLaurent Pinchart
Rename the BufferWriter class to FileSink to establish a common naming scheme for all sinks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-08-05cam: Turn BufferWriter into a FrameSinkLaurent Pinchart
Make the BufferWriter class inherit from FrameSink, and use the FrameSink API to manage it. This makes the code more generic, and will allow usage of other sinks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-08-05cam: Add FrameSink base classLaurent Pinchart
The FrameSink class serves as a base to implement components that consume frames. This allows handling frame sinks in a generic way, independent of their nature. The BufferWrite class will be ported to FrameSink in a second step. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>