summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-26ipa: raspberry: Initialize ControlInfo with values listJacopo Mondi
Initialize the ControlInfoMap of controls supported by the Raspberry Pi pipeline handler and IPA using the list of the enumerated values instead of specifying them manually. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: controls: Fix rogue whitespaceJacopo Mondi
Remove an extra whitespace in the declaration of a dictionary entry in gen-controls.py script. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: controls: Generate an array of valid valuesJacopo Mondi
For each Control that supports enumerated values generate an array of ControlValue which contains the full list of valid values. At the expense of a slight increase in memory occupation this change allows the construction of the ControlInfo associated with a Control from the values list, defaulting the minimum and maximum values reported by the ControlInfo. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: controls: Rename enumerate valuesJacopo Mondi
Rename the enumeration of supported values with the suffix "Enum" in place of "Values" to prepare to re-use the suffix "Values" for the vector of Control's value introduced by the next patch. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: controls: Construct from valid valuesJacopo Mondi
Add a new constructor to the ControlInfo class that allows creating a class instance from the list of the control valid values with an optional default one. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: control_ids: Define draft controlsJacopo Mondi
libcamera is in the process of defining its own set of controls to enable applications to control the image capture process and return information on the captured frames. To temporarily close the gap in the Android camera HAL and support all controls required in the LIMITED hardware level, define a set of Draft controls whose values are taken from their Android definition, in order to allow pipeline handlers to support Android. Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: Support draft controls and propertiesKieran Bingham
Extend the control and property framework to support exposing draft controls and properties in a scoped namespace. The controls/properties themselves will retain the same ordering in the relevant enum/id maps - but the access to any draft control will require explicitly referencing through its' draft:: namespace prefix. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Added missing hunk in control_ids.cpp.in and changed subject] Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-26libcamera: controls: Disable ControlValue<T> construction from unsupported TLaurent Pinchart
The ControlValue<T> constructor for non-array values is a template function that participates in overload resolution for all T types that are not Span or std::string. Other T types that are not supported then result in a compilation error. This causes issues when calling an overloaded function that can accept both a ControlValue and a Span with an std::array<U> parameter. The first overload will be resolved using implicit construction of a ControlValue from the std::array<U>, while the second overload will be resolved using implicit construction of a Span<U> from the std::array<U>. This results in a compilation error due to an ambiguous function call. The first overload is invalid, selecting it would result in a compilation error in the ControlValue constructor, as the ControlValue<T> constructor doesn't support std::array<U> for type T. The compiler can't know about that, as overload resolution happens earlier. To fix it, we can disable the ControlValue<T> constructor for unsupported types T, moving the type check from compilation of the function to overload resolution. The constructor will not participate in overload resolution, and the call won't be ambiguous. The end result is the same for unsupported types, compilation will fail. Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-23android: jpeg: encoder: Use pass-by-value for Exif parameterUmang Jain
Following the reasoning of pass-by-value for libcamera::Span parameters from 90c193f2a700("android: Modify Encoder interface") i.e. they are easy to copy/move/construct, align the Exif parameter passing to the encoder interface in this consistent way. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-23android: jpeg: Drop "libcamera::" namespace from functions' argumentsUmang Jain
Drop "libcamera::" from functions' arguments for *.cpp files as they have using namespace libcamera; directive in the beginning. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-23libcamera: Declare empty virtual destructors as defaultedLaurent Pinchart
The base class of polymorphic classes is required to declare a destructor. Several of these are empty, and can thus be declared as defaulted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-23libcamera: Drop unneeded empty default constructors and destructorsLaurent Pinchart
A few default constructors and destructors are needlessly defined as empty. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-23libcamera: media_object: Remove unneeded destructorsLaurent Pinchart
The MediaEntity, MediaLink and MediaPad classes don't need custom destructors. For MediaEntity and MediaPad, the destructors clear a vector embedded in the classes, which will be done by the default destructor. For MediaLink, the destructor is already empty. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21libcamera: pipeline: simple: Set camera propertiesLaurent Pinchart
Initialize the CameraData properties with the properties exposed by the sensor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
2020-10-21libcamera: pipeline: Fail match() when no camera is registeredLaurent Pinchart
The rkisp1 and simple pipeline handlers can fail to register any camera, if initialization of all the detected cameras fail. In that case, they still return success from their match function. As no camera gets registered, the pipeline handler is immediately destroyed, releasing the acquired media devices, and the camera manager immediately tries to match the same pipeline handler with the same media device, causing an endless loop. Fix it by returning false from the match function if no camera gets registered. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-21meson: Enable shadowed variable warningKieran Bingham
Shadowing variables can lead to unexpected bugs where a code path utilises a variable that may not have been intended by the developer, leading to hard to find bugs. Enable warnings for shadowed variables as defined at: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wshadow As an effect of utilising -Werror, this will cause variable or type shadowing to become a build-time error. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21test: v4l2_videodevice: Prevent variable shadowing of formatKieran Bingham
Rename the scoped usage of the variable format while iterating the formats as it shadows the outer scoped format which is used for specific testing. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21qcam: main_window: Explicitly name raw bufferKieran Bingham
The buffer obtained for queuing to a raw stream shadows the buffer passed in for the main view finder stream. Prevent shadowing, and explicitly name the buffer as a separate variable. Suggested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21cam: options: Rename optional arg to prevent shadowingKieran Bingham
The parseValue function is given the optarg directly from the getopt library, but the function retains the same name. This causes an shadowed variable of the global optarg variable to be present in the parseValue function. While this is not harmful, rename it to work towards disabling shadowed variables. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-21v4l2: camera: Prevent shadowing within V4L2Camera::BufferKieran Bingham
Rename the internal member variables to use the post-fixed '_' member variable naming style. This in turn ensures variable shadowing does not occur in the member initializer list of the constructor. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: metadata: Disable -WshadowKieran Bingham
Do not warn on shadowed variables inside the metadata library, which is directly imported without modifications. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: Remove shadowing FrameBuffer usageKieran Bingham
A FrameBuffer *buffer is used to obtain the 'first' buffer from a request which is used purely to identify the timestamp from the metadata in two locations. Rather than keep the FrameBuffer instance around, which then causes further usages of FrameBuffers to be shadowed, store the timestamp locally. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: use member style on Camera3RequestDescriptorKieran Bingham
Use the postfixed '_' member variable naming style for the Camera3RequestDescriptor structure, which in turn ensures that variable shadowing does not occur in the member initializer list of the constructor. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21android: camera_device: Use existing variable definitionsKieran Bingham
Prevent variable shadowing by removing the redeclaration of variables with the same name (and type) where the existing variable can be reused. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21ipa: raspberrypi: Re-use iterator variableKieran Bingham
The function gauss_seidel2_SOR() makes use of a function scoped iterator 'i', for several loops, and has a precedence of re-using the function scoped iterator declaration in the majority of cases, except the first where it is declared in the loop scope before the function scope, and later which aliases a new declaration. Re-use the existing iterator variable for consistency, and to prevent variable aliasing. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-21libcamera: v4l2_videodevice: Prevent shadowing of V4L2BufferCache membersKieran Bingham
The members free, and lastUsed were not following the libcamera coding style, and were producing a shadowed parameter on the construction. Rename them to be marked as member variables with the _ postfix accordingly. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21libcamera: pipeline: rpi_stream: Explicitly name requestBufferKieran Bingham
The FrameBuffer used to track any addition to the request in an under-run event was shadowed against the returned buffer, being placed back on the availableBuffers_ queue. Rename the shadowed variable to be more explicit that it is a separate Buffer. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-21libcamera: pipeline: Use existing variable definitionsKieran Bingham
Prevent variable shadowing by removing the redeclaration of variables with the same name (and type) where the existing variable can be reused. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21libcamera: pipeline: Prevent variable shadowingKieran Bingham
Remove variable shadowing within the pipeline handler implementations. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-21libcamera: thread: Prevent shadowing of signal nameKieran Bingham
The Thread::wait() function creates a boolean flag 'finished' which shadows the internal member signal of the same name. Rename the boolean flag to prevent confusion and shadowing of the signal. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-21android: camera_stream: Make some member variables constantHirokazu Honda
CameraStream initializes several member variables in the initializer list. Some of them are unchanged after. This makes them constant. Especially, doing to |cameraDevice_| represents CameraStream doesn't have the ownership of it. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: post_processor_jpeg: Make |cameraDevice_| constantHirokazu Honda
PostProcessorJpeg doesn't have the ownership of CameraDevice given in the constructor. To clarify it, this makes the member variable constant. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: Modify Encoder interfaceHirokazu Honda
In Encoder::encode(), the |source| argument doesn't have to be a pointer. This replaces its type, const pointer, with const reference as the latter is preferred to the former. libcamera::Span is cheap to construct/copy/move. We should deal with the type as pass-by-value parameter. Therefore this also drops the const reference in the |destination| argument. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21android: Modify PostProcessor interfaceHirokazu Honda
In PostProcessor::process(), the |source| argument doesn't have to be a pointer. This replaces its type, const pointer, with const reference as the latter is preferred to the former. libcamera::Span is cheap to construct/copy/move. We should deal with the type as pass-by-value parameter. Therefore this also drops the const reference in the |destination| argument. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20libcamera: Document the libcamera namespaceLaurent Pinchart
The libcamera namespace has been left undefined from the start. While the documentation doesn't bring much added value, leaving it out confuses the most recent doxygen master branch: include/libcamera/transform.h:16: warning: Internal inconsistency: member Identity does not belong to any container! include/libcamera/transform.h:17: warning: Internal inconsistency: member Rot0 does not belong to any container! include/libcamera/transform.h:18: warning: Internal inconsistency: member HFlip does not belong to any container! include/libcamera/transform.h:19: warning: Internal inconsistency: member VFlip does not belong to any container! include/libcamera/transform.h:20: warning: Internal inconsistency: member HVFlip does not belong to any container! include/libcamera/transform.h:21: warning: Internal inconsistency: member Rot180 does not belong to any container! include/libcamera/transform.h:22: warning: Internal inconsistency: member Transpose does not belong to any container! include/libcamera/transform.h:23: warning: Internal inconsistency: member Rot270 does not belong to any container! include/libcamera/transform.h:24: warning: Internal inconsistency: member Rot90 does not belong to any container! include/libcamera/transform.h:26: warning: Internal inconsistency: member Rot180Transpose does not belong to any container! Document it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20libcamera: Place doxygen \file block above namespaceLaurent Pinchart
Make the whole code base consistent by placing the doxygen \file block above the libcamera namespace opening. There's a single offender, and two locations in which a white line is missing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20ipa: Skip doxygen parsing for pipeline-specific IPA headersLaurent Pinchart
The pipeline-specific IPA headers are not part of the libcamera API, they should thus be skipped when generating documentation. doxygen doesn't complain currently due to the fact that types defined in those headers are part of undocumented namespaces. In preparation for documenting the libcamera namespace, make sure the headers don't get parsed by doxygen. Only vimc.h needs a header guard, as rkisp1.h uses the global namespace and raspberrypi.h uses the undocumented libcamera::RPi namespace, neither of which cause issues. Still, for consistency, add header guards to all headers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20ipa: Rename ipa_vimc.h to vimc.hLaurent Pinchart
To be consistent with the other pipeline handlers that don't prefix their IPA protocol header with ipa_, rename ipa_vimc.h to vimc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-20meson: Enable -Wextra-semi for clangHirokazu Honda
The option, -Wextra-semi, helps developers to find unnecessary semicolons. This option is available with clang. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20ipa: Omit extra semicolonHirokazu Honda
There is the unnecessary semicolon after ipaCreate() in raspberrypi.cpp. This removes it. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20libcamera: Omit extra semicolonsHirokazu Honda
The end semicolons with LOG_DEFINE_CATEGORY, LOG_DECLARE_CATEGORY and REGISTER_PIPELINE_HANDLER are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20include: libcamera: Omit extra semicolonsHirokazu Honda
This removes the unnecessary semicolon in span.h. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20android: Omit extra semicolonsHirokazu Honda
The end semicolons with LOG_DECLARE_CATEGORY and LOG_DEFINE_CATEGORY are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20gstreamer: Omit extra semicolonsHirokazu Honda
Macros used in gstreamer (e.g. G_DEFINE_TYPE) are functions. The end semicolons with the macros are unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20v4l2: Omit extra semicolonsHirokazu Honda
LOG_DECLARE_CATEGORY macro contains the semicolon. The end semicolon with the macro is unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20test: Omit extra semicolonsHirokazu Honda
TEST_REGISTER macro is main function. The end semicolon with the macro is unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-19include: linux: Update V4L2_CID_USER_BCM2835_ISP_BASE to match upstream treeNaushir Patuck
The V4L2_CID_USER_BCM2835_ISP_BASE has changed in the downstream Raspberry Pi 5.9 kernel to match the upstream defines, see here: https://github.com/raspberrypi/linux/pull/3897. Note, that this will cause an ABI breakage with the current downstream Raspberry Pi 5.4 kernel until both this change and the following PR has been merged: https://github.com/raspberrypi/linux/pull/3897 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-16android: jpeg: Port to PostProcessor interfaceUmang Jain
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg. This encapsulates the encoder and EXIF generation code into the PostProcessorJpeg layer and removes these specifics related to JPEG, from the CameraStream itself. Signed-off-by: Umang Jain <email@uajain.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
2020-10-16android: post_processor: Introduce a PostProcessor interfaceUmang Jain
Introduce a PostProcessor interface for the streams that require any kind of processing (refer to CameraStream::Type) for their consumption by the HAL layer. The PostProcessor interface can be configured via configure() and the actual processing can be initiated using process(). The post-processing layer can be extended to have multiple post processors for various stream configurations. As of now, we only have one post processor (JPEG), hence the subsequent commit will port its function to this interface. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-16android: CameraStream: Fix nitpick indentation for mutex_Umang Jain
Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>