summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2021-05-25Revert "libcamera: V4L2Device: Remove the controls order assumption in ↵Laurent Pinchart
updateControls()" This reverts commit 34bee5e84ecba01e0ded5cacbc46c277c5a0edba. The commit introduced a breakage in the master branch, reported by linux-surface users already. Let's revert it while discussing the propert fix. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com>
2021-05-25pipeline: simple: Rework the supportedDevices listPhi-Bang Nguyen
The supportedDevices may contain entries which have the same driver but different converters. For example, if we add these two entries: { "mtk-seninf", "mtk-mdp", 3 }, { "mtk-seninf", "mtk-mdp3", 3 }, the simple pipeline handler will always take the first one where it can acquire the driver and skip the rest. So, make the changes to support this usecase. Signed-off-by: Phi-Bang Nguyen <pnguyen@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-25libcamera: V4L2Device: Remove the controls order assumption in updateControls()Hirokazu Honda
The original updateControls() has the assumption that ctrls and v4l2Ctrls lists are in the same order. It is dependent on the caller implementation though. This changes updateControls() implementation so that it works without the assumption. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24android: camera_worker: Process all queued requests when stoppingLaurent Pinchart
When stopping the camera worker, queuedRequest() calls may have queued asynchronous function invocation messages to the worker thread, and some of those messages may not have been processed yet. The messages will stay in the thread's queue until the camera worker is restarted (when the camera service will start a new capture session). At that point, they will be dispatched, which will cause a crash due to the CaptureRequest passed to processRequest() having been deleted by CameraDevice::stop() calling descriptors_.clear(). Fix this by forcing dispatching of all function invocation messages when stopping the camera worker thread. Note that this is inherently racy, as more queueRequest() calls may arrive from the camera service while we're stopping. This race condition will be addressed by a subsequent patch series. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-24meson: Add a configuration option to build IPAsUmang Jain
There can be multiple IPAs per pipeline-handler or platform. They can live in-tree or externally linked. It is up to the vendor whether to use in-tree IPA for a platform or provide it externally. In the case of IPAs being external, building in-tree IPAs might be futile hence, provide a clear and explicit mechanism to choose whether to build the in-tree IPA for the platform or not. By default, all in-tree IPAs are built when a matching Pipeline handler is also enabled. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: ipu3: Introduce IPAConfigInfo in IPCUmang Jain
IPAConfigInfo is a consolidated data structure passed from IPU3 pipeline-handler to IPU3 IPA. The structure can be extended with additional parameters to accommodate the requirements of multiple IPU3 IPA modules. Adapt the in-tree IPU3 IPA to use IPAConfigInfo as well. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: ipc: Rename CameraSensorInfo to IPACameraSensorInfoUmang Jain
This matches the naming convention for IPA IPC. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: mojom: Move CameraSensorInfo struct exclusively to IPA IPCUmang Jain
CameraSensorInfo structure is designed to pass in camera sensor related information from pipeline-handler to IPA. Since the pipeline-handler and IPA are connected via mojom IPC IPA interface, the interface itself provides a more suitable placement of CameraSensorInfo, instead of camera_sensor.h (which is a libcamera internal header ultimately, at this point). As CameraSensorInfo is already defined in core.mojom, it is just a matter of removing [skipHeader] tag to allow code-generation of CameraSensorInfo. Finally, update header paths to include CameraSensorInfo definition from IPA interfaces instead of "libcamera/internal/camera_sensor.h". Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: Move core IPA interface documentation to a .cpp fileUmang Jain
Moving the core.mojom documentation to its corresponding .cpp file (core_ipa_interface.cpp). This will allow Doxygen to generate the documentation for IPABuffer, IPASettings and IPAStream structures. Since the .mojom files are placed in include/ directory, the .cpp file will live in $sourcedir/src/libcamera/ipa/ - which can also contain documentation for other mojom generated IPA interfaces in subsequent commit. Also hide the constructors in generated IPA interface from doxygen, via #ifndef __DOXYGEN__. These constructors provide no major value in documenting them, instead will spew out doxygen warnings during the build. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24libcamera: thread: Document race condition at stop timeLaurent Pinchart
When a thread stops, messages may be left in its message queue. Document this in details, with a way to force processing of pending messages when the thread is stopped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-24libcamera: thread: Drop doc of asynchronous signals delivery to applicationsLaurent Pinchart
The asynchronous signal delivery mechanism can't be used by application, as it requires libcamera to be aware of the application event loop, which has been dropped a long time ago. Drop the corresponding documentation paragraph. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-24libcamera: thread: Enforce dispatchMessages() call context with assertLaurent Pinchart
The Thread::dispatchMessages() function is meant to be called from within the thread only. Catch incorrect usage with an ASSERT(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-24libcamera: thread: Document dispatchMessages() thread-safety requirementsLaurent Pinchart
The Thread class is incorrectly documented as thread-safe, as the dispatchMessages() function isn't thread-safe. Fix the documentation by tagging individual functions as thread-safe as appropriate. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-24libcamera: V4L2Control: remove V4L2Control classesHirokazu Honda
V4L2ControlId and V4L2ControlInfo are just convenience classes to create ControlId and ControlInfo from v4l2_query_ext_control. Therefore, there is no need of being a class. It is used only from V4L2Device. This removes the classes and put the equivalent functions of creating ControlId and ControlInfo in v4l2_device.cpp. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24libcamera: pipeline: Remove unnecessary v4l2_controls.h includesHirokazu Honda
v4l2_controls.h is included in some places in pipeline codes. But V4l2Control classes are not used there. This removes the redundant v4l2_controls.h includes. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24libcamera: pipeline: ipu3: Try queuing pending requests if a buffer is availableHirokazu Honda
IPU3CameraData stores requests that have been failed due to a buffer shortage. The requests should be retried once enough buffers are available. This sets the retry function as signal to CIO2Device and IPU3Frame, and invokes it from CIO2Device::tryReturnBuffer() and IPU3Frame::remove(). Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24libcamera: pipeline: ipu3: Store requests in the case a buffer shortageHirokazu Honda
PipelineHandlerIPU3 returns -ENOBUFS and -ENOMEM on queueing a request when there are not sufficient buffers for the request. Since the request will be successful if it is queued later when enough buffers are available. The requests failed due to a buffer shortage should be stored and retried later in the FIFO order. This introduces the queue in IPU3CameraData to do that. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-22libcamera: log: Hide value of the ASSERT() macroLaurent Pinchart
ASSERT() is a function-like macro that expands to internal code. Hide the expansion from the generated documentation, as it would only confuse the reader. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-05-22libcamera: log: Document LOG() restrictionsLaurent Pinchart
The LOG() macro uses the global Logger and LogCategory objects internally. This can result in crashes or other undefined behaviour when logging from destructors of global objects, as the Logger and/or the LogCategory instances may have been destroyed. This isn't ideal and should eventually be fixed. For the time being, document the restriction, and add a todo list item to fix the problem. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-20libcamera: ipu3: imgu: Bump script versionJacopo Mondi
Update the revision of the ImgU Python configuration tool the libcamera implementation is based on to commit 243d134 ("Fix some bug for some resolutions"). Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org
2021-05-20libcamera: ipu3: imgu: Add pipe calculation debugJacopo Mondi
Add pipe calculation debug with a new associated log category. This helps compare the pipe calculation with the one performed by the python script. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-20libcamera: ipu3: imgu: Fix BSD height size comparisonJacopo Mondi
Fix a size comparison when iterating on the BDS sizes to accepts values that are equal to the minimum accepted height. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-20libcamera: ipu3: imgu: Fix IF height selectionJacopo Mondi
Apply to calculateBDSHeight() function the first hunk of commit 243d134 ("Fix some bug for some resolutions") from https://github.com/intel/intel-ipu3-pipecfg.git. The condition for the computed IF rectangle height to be matched against the desired alignment now makes sure that it is included in the minimum and maximum acceptable values. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-20libcamera: ipu3: imgu: Fix BDS height calculationJacopo Mondi
The IF rectangle height is iteratively computed by first subtracting the scaling factor to the estimated height, then in a successive loop by adding the same scaling factor until the maximum IF size is not reached. As the computed IF height is not cached in any variable, the second loop over-writes the result of the first one, even if the BDS alignment condition is not satisfied. Fix this by caching the result of the two iterations, and use the one that produced any result, with a preference for the one produced by the second loop, as implemented in the reference python script. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-20libcamera: ipu3: imgu: Filter BDS by heightJacopo Mondi
Apply to calculateBDS() function the content of commit 243d134 ("Fix some bug for some resolutions") from https://github.com/intel/intel-ipu3-pipecfg.git. The calculated BDS sizes are filtered by height and not only by width anymore. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-20libcamera: ipu3: imgu: Filter resolutions < IF_CROP_MAXJacopo Mondi
As reported in https://bugs.libcamera.org/show_bug.cgi?id=32 allowing resolutions < IF_CROP_MAX leads to a not manageable number configurations to be tested, slowing down the ImgU pipe configuration to a point which is not acceptable for production devices. Filter all resolutions < IF_CROP_MAX to maintain the run-time complexity acceptable and remove the safety check that was meant to avoid overflows when computing the IF rectangle sizes. Bug: https://bugs.libcamera.org/show_bug.cgi?id=32 Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-05-20libcamera: ipu3: imgu: Update BDS calculation processJacopo Mondi
Apply the last three hunks of commit 243d134 ("Fix some bug for some resolutions") from https://github.com/intel/intel-ipu3-pipecfg.git to the BDS calculation procedure. The BDS calculation is now perfomed by scaling both width and height, and repeated by scaling width first. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
2021-05-18android: camera_metadata: Add type sanity check to updateEntry()Laurent Pinchart
The CameraMetadata::updateEntry() functions cast the data pointer to a void pointer, which is then used internally to call update_camera_metadata_entry(). If the caller passes a pointer to an incorrect data type, the behaviour is undefined, with possible crashes if the incorrect data type is smaller than expected by the Android metadata library. To avoid crashes, make all public updateEntry() functions take typed pointers, and pass the element size to the internal function. The element size is then checked against the expected size, and an error message logged if they don't match. This won't catch incorrect data types that have the same size as the correct type, but will at least avoid potential crashes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2021-05-18android: camera_metadata: Make internal functions privateLaurent Pinchart
The resize() function and the addEntry() override that takes a void pointer are not meant to be called by the user of the CameraMetadata class. Make them private. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2021-05-18android: camera_metadata: Constify argument to addEntry() and updateEntry()Laurent Pinchart
The addEntry() and updateEntry() overrides that take a reference to a container don't need to modify the container. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2021-05-18android: camera_metadata: Rename sizeofT argument to elementSizeLaurent Pinchart
The sizeofT argument to CameraMetadata::addEntry() stores the size of one element. Its name is a bit cryptic as the function isn't a template function with a typename T. Rename it to elementSize. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Paul Elder <paul.elder@ideasonboard.com>
2021-05-18v4l2: Replace manual loop counters with utils::enumerate()Laurent Pinchart
Use the newly introduced utils::enumerate() to replace manual loop counters. A local variable is needed, as utils::enumerate() requires an lvalue reference. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-18libcamera: utils: Add enumerate view for range-based for loopsLaurent Pinchart
Range-based for loops are handy and widely preferred in C++, but are limited in their ability to replace for loops that require access to a loop counter. The enumerate() function solves this problem by wrapping the iterable in an adapter that, when used as a range-expression, will provide iterators whose value_type is a pair of index and value reference. The iterable must support std::begin() and std::end(). This includes all containers provided by the standard C++ library, as well as C-style arrays. A typical usage pattern would use structured binding to store the index and value in two separate variables: std::vector<int> values = ...; for (auto [index, value] : utils::enumerate(values)) { ... } Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-05-18pipeline raspberrypi: Move adding of ScalerCrop to the Request metadataNaushir Patuck
With the recent change to merge existing Request metadata with the ControlList provided by the IPA in commit fcfb1dc02a6b ("libcamera: raspberry: Report sensor timestamp"), we can now write the controls::ScalerCrop value at the start of the pipeline instead of at the end. This change simplifies the logic slightly, and allows us to write all metadata items to the Request in one place. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-18pipeline: raspberrypi: Store timestamp in the correct Request metadataNaushir Patuck
Write the controls::SensorTimestamp value in the Request metadata when the request is popped from the queue ready to run the pipeline. This ensures that the timestamp is written to the correct Request item, which may not be at the top of the queue when the Unicam buffer dequeue occurs. Fixes: fcfb1dc02a6b ("libcamera: raspberry: Report sensor timestamp") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-14android: jpeg: post_processor: Use the new metadata functionsPaul Elder
Now that CameraMetadata supports more convenient functions, use those instead. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-14android: camera_device: Use the new CameraMetadata functionsPaul Elder
Now that CameraMetadata supports more convenient functions, use those instead. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-14android: camera_metadata: Auto-resize CameraMetadataPaul Elder
Previously we had to manually declare the size of CameraMetadata on allocation, and its count could not be changed after construction. Change CameraMetadata's behavior so that the user can simply add or update entries, and the CameraMetadata will auto-resize (double the size) as necessary. Also remove everything involved with calculating the initial size for any CameraMetadata instances. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-12android: camera_device: Fix typo in result metadata allocation errorPaul Elder
Fix an error message typo s/static/result/. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-11meson: Replace obselete join_paths() with '/' operatorUmang Jain
Since meson v0.49.0, join_paths() is equivalent to '/' hence, drop and replace it with '/' short-hand in meson files. This commit does not introduce any functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-11ipa: raspberrypi: Rate-limit the controller algorithmsNaushir Patuck
The controller algorithms currently run on every frame provided to the IPA by the pipeline handler. This may be undesirable for very fast fps operating modes where it could significantly increase the computation cycles (per unit time) without providing any significant changes to the IQ parameters. The added latencies could also cause dropped frames. Pass the FrameBuffer timestamp to the IPA through the controls. This timestamp will be used to rate-limit the controller algorithms to run with a minimum inter-frame time given by a compile time constant, currently set to 16.66ms. On startup, we don't rate-limit the algorithms until after the number of frames required for convergence. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add a Merge method to RPiController::MetadataNaushir Patuck
Add a new Merge method to the Metadata class. This will merge all unique key/value pairs from a source metadata map to the destination map. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add move/copy ctors and operators to Metadata classNaushir Patuck
Add a default, move and copy constructor as well as a move operator implementation RPiController::Metadata class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Switch to std::scoped_lock in the Metadata classNaushir Patuck
Replace std::lock_guard with std::scoped_lock. When locking a single mutex, both are functionally the same. When locking two mutexes in the operator= overload, the scoped_lock uses a deadlock avoidance algorithm to avoid deadlock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Reformat RPiController::Metadata class headerNaushir Patuck
Rearrange header includes to be in alphabetical order. Add whitespace to class definition to match libcamera coding guidelines. Fix a typo in the comment showing an example of scoped locks. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Store dropped frame count in a member variableNaushir Patuck
Store the number of dropped frames on startup in a member variable. This will be used in a subsequent change for rate limiting the controller algorithms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11libcamera: pipeline: raspberrypi: Update ControlInfoMap after sensor format ↵David Plowman
change The Raspberry Pi pipeline handler does not update the sensor format using CameraSensor::setFormat(), so it must manually force the update of the associated ControlInfoMap. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11libcamera: camera_sensor: Fix frame lengths calculated by sensorInfo()David Plowman
The minimum and maximum vblanking can change when a new format is applied to the sensor subdevice, so be sure to retrieve up-to-date values. The V4L2Device acquires the new updateControlInfo() method to perform this function, and which the CameraSensor calls automatically if its setFormat method is used to update the sensor. However, not all pipeline handlers invoke the setFormat method directly, so the new method must be made publicly available for pipeline handlers to call if they need to. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-10android: camera_device: Report sensor physical sizeJacopo Mondi
Calculate the value of the ANDROID_SENSOR_INFO_PHYSICAL_SIZE property multiplying the number of sensor's readable pixels with the pixel unit cell size if provided by the Camera. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-10libcamera: camera_sensor: Register static propertiesJacopo Mondi
Register static properties in the CameraSensor class by inspecting the camera sensor properties database. Static properties are overridden by properties retrieved from the kernel interface at run-time if any overlap between the two sets occurs. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>