summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi
AgeCommit message (Collapse)Author
2021-02-26ipa: raspberrypi: AWB: Remove unused codeDavid Plowman
Some more code from pre-libcamera versions is removed. There is no functional change. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Rename IPA Interface namespace to ipa::RPiNaushir Patuck
Rename the IPA interface namespace to ipa::RPi for consistency with the libcamera::RPi namespace label. There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Tidy-ups after IPAInterface changesNaushir Patuck
This commit addresses a couple of tidy-ups after the IPAInterface rework: - Rename ConfigStaggeredWrite -> ConfigSensorParams - Rename setIsp -> setIspControls There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19ipa: raspberrypi: Do not require SDN (spatial denoise) algorithmDavid Plowman
A camera tuning is not required to load an SDN algorithm. In keeping with other controls, do not fail when a particular control was expecting this algorithm, just warn that it is not present. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-17ipa: raspberrypi: Fix exposure and gain delays for imx477Naushir Patuck
The exposure and gain delays for imx477 are both 2 frames. This error was not noticeable because the controller was using the embedded metadata to get the exposure and gain values for the frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-16libcamera: IPAInterface: Replace C API with the new C++-only APIPaul Elder
Remove everything related to the C API, including ipa_context, ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant documentation. ipaCreate() provided by IPA implementations, and createInterface() provided by IPAModule (wrapper around IPA implementation) both now return a C++ object IPAInterface instead of struct ipa_context. Although IPAInterfaceWrapper is the only component of libipa, the skeleton and build files for libipa are retained. After converting the C API to the C++-only API, make all pipeline handlers and IPAs use the new API. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- This is a combination of 21 commits: --- libcamera: IPAModule: Replace ipa_context with IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate_() and createInterface() return IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: ipa_context_wrapper: Remove ipa_context_wrapper Since ipa_context has been replaced with custom IPAInterfaces, it is not longer needed. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: remove ipa_context and functions from documentation Remove all the documentation related to ipa_context and the C IPA API, as well as the documentation about the functions in the IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAInterface: Remove all functions from IPAInterface Now that all the functions in the IPA interface are defined in the data definition file and a specialized IPAInterface is generated per pipeline handler, remove all the functions from the base IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: make ipaCreate return IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate return IPAinterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- ipa: remove IPAInterfaceWrapper As every pipeline has its own proxy, IPAInterfaceWrapper is no longer necessary. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- libcamera: IPAProxy: Remove stop() override Since stop() is part of the IPA interface, and the IPA interface is now generated based on the data definition file per pipeline, this no longer needs to be overrided by the base IPAProxy. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme IPAProxy is changed in two major ways: - Every pipeline has its own proxy, to support each pipeline's IPA interface - IPAProxy implementations always encapsulate IPA modules, and switch internally for isolation or threaded The IPAProxy registration mechanism is removed, as each pipeline will have its own proxy, so the pipeline can pass the specialized class name of the IPAProxy to the IPAManager for construction. IPAManager is changed accordingly to support these changes: - createIPA is a template function that takes an IPAProxy class, and always returns an IPAProxy - IPAManager no longer decides on isolation, and simply creates an IPAProxy instance while passing the isolation flag Consequently, the old IPAProxy classes (IPAProxyThread and IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use the new IPAManager interface, and to construct a ProcessManager as no single global instance is created anymore. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> --- libcamera: IPAProxy: Add isolate parameter to create() Since IPAProxy implementations now always encapsulate IPA modules, add a parameter to create() to signal if the proxy should isolate the IPA or not. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline Now that each pipeline handler has its own IPAProxy implementation, make the IPAManager fetch the IPAProxy based on the pipeline handler name. Also, since the IPAProxy is used regardless of isolation or no isolation, remove the isolation check from the proxy selection. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAManager: add isolation flag to proxy creation When the IPA proxy is created, it needs to know whether to isolate or not. Feed the flag at creation of the IPA proxy. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Make createIPA return proxy directly Since every pipeline knows the type of the proxy that it needs, and since all IPAs are to be wrapped in a proxy, IPAManager no longer needs to search in the factory list to fetch the proxy factory to construct a factory. Instead, we define createIPA as a template function, and the pipeline handler can declare the proxy type when it calls createIPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy: Remove registration mechanism Implementations of IPA proxies use a registration mechanism to register themselves with the main IPA proxy factory. This registration declares static objects, causing a risk of things being constructed before the proper libcamera facilities are ready. Since each pipeline handler has its own IPA proxy and knows the type, it isn't necessary to have a proxy factory. Remove it to alleviate the risk of early construction. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread We have now changed the proxy from per-IPC mechanism to per-pipeline. The per-IPC mechanism proxies are thus no longer needed; remove them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- tests: ipa_interface_test: Update to use new createIPA Update the IPA interface test to use the new createIPA function from IPAManager. Also create an instance of ProcessManager, as no single global instance is created automatically anymore. Update meson.build to to depend on the generated IPA interface headers. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: PipelineHandler: Remove IPA from base class Since pipeline handlers now have their own IPA interface types, it can no longer be defined in the base class, and each pipeline handler implementation must declare it and its type themselves. Remove it from the base class. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- ipa: raspberrypi: Add mojom data definition file Add a mojom data definition for raspberrypi pipeline handler's IPAs. This simplifies the API between the raspberrypi pipeline handler and the IPA, and is not a direct translation of what was used before with IPAOperationData. Also move the enums from raspberrypi.h to raspberrypi.mojom Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: raspberrypi: Use new data definition Now that we can generate custom functions and data structures with mojo, switch the raspberrypi pipeline handler and IPA to use the custom data structures as defined in the mojom data definition file. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: vimc: Support the new IPC mechanism Add support to vimc pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> --- libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism Add support to the rkisp1 pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism Add support to ipu3 pipeline handler and IPA for the new IPC mechanism. [Original version] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> [Fixed commit message and small changes] Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-16ipa: raspberrypi: meson: Add dependency on generated headersPaul Elder
The raspberrypi IPA will depend on the raspberrypi IPA header generated from the mojo definition file. Add the dependency. Simply add all generated headers as a dependency, instead of walking the list of headers, to simplify the implementation. This will have the effect of generating all headers before compiling the IPA, which has no drawbacks. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-02-11ipa: raspberrypi: AWB: Fix race condition setting manual gainsDavid Plowman
Applying the manual_r_ and manual_b_ values is entirely removed from the asynchronous thread where their use constituted a race hazard. The main thread now deals with them entirely, involving the following changes. 1. SetManualGains() applies the new values directly to the "sync_results", meaning that Prepare() will jump to the new values immediately (which is a better behaviour). 2. Process() does not restart the asynchronous thread when manual gains are in force. 3. The asynchronous thread might be running when manual gains are set, so we ignore the results produced in this case. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-11meson: Fix coding style when declaring arraysLaurent Pinchart
The meson.build files mix array declarations with and without a space after the opening and before the closing square bracket. The vast majority of cases don't use spaces, so standardize on that. While it it, fix indentation in a few places. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-10ipa: raspberrypi: AWB: Remove unecessary frame count variableDavid Plowman
The variable frame_count2_ is not needed as Prepare() and Process() always run in lock step one after the other. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-09ipa: raspberrypi: Handle control::NoiseReductionMode in the controllerNaushir Patuck
The application provided noise reduction mode gets passed into the denoise controller. The denoise controller in turn returns the mode to the IPA which now sets up the colour denoise processing appropriately. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-09ipa: raspberrypi: Add a DenoiseAlgorithm class to the ControllerNaushir Patuck
This denoise algorithm class will be used to pass in the user requested denoise operating mode to the controller. The existing Denoise controller will derive from this new DenoiseAlgorithm class. Add a denoise mode field in the denoise status metadata object for the IPA to use when configuring the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-09ipa: raspberrypi: Rename SdnStatus to DenoiseStatusNaushir Patuck
This change is in anticipation of the addition of a DenoiseAlgorithm base class which the SDN class will derive from. We want to match the metadata object name with the base class algorithm name. This renames: - SdnStatus metadata object to DenoiseStatus - "sdn.status" metadata string key to "denoise.status" - sdn_status.h header file to denoise_status.h Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-08ipa: raspberrypi: Remove atomic variable from Algorithm classDavid Plowman
Pause() and Resume() are only called synchronously so paused_ does not need to be atomic. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: lux: Supply missing method and remove atomic variableDavid Plowman
Supply the missing SetCurrentAperture() method (even though no one is calling it). If we did call it, it would be called synchronously so the atomic variable is not required. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: noise: Remove unnecessary atomic variableDavid Plowman
mode_factor_ does not need to be atomic - it is set by SwitchMode() which runs synchronously. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: rasberrypi: contrast: Remove unnecessary atomic variablesDavid Plowman
SetBrightness() and SetContrast() are only called synchronously so there is no need for brightness_ and contrast_ to be atomic. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: ccm: Remove unnecessary atomic variableDavid Plowman
SetSaturation() gets called synchronously so there is no need for saturation_ to be atomic. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: AWB: Improve lockingDavid Plowman
Fix a couple of places where notify_one() was called with the lock held. Also restartAsync doesn't need the lock for its entire duration. This change exactly matches commit db552b0b925a ("libcamera: ipa: raspberrypi: ALSC: Improve locking in a few places") where we do the same for ALSC (the asynchronous thread arrangement there is identical). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-07ipa: raspberrypi: AWB: Remove unnecessary locking for AWB settingsDavid Plowman
AWB settings get updated synchronously with the main thread, so the settings_mutex_ and associated locking can be removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-05ipa: raspberrypi: Pass the maximum allowable shutter speed into the AGCNaushir Patuck
In order to provide an optimal split between shutter speed and gain, the AGC must know the maximum allowable shutter speed, as limited by the maximum frame duration (either application provided or the default). Add a new API function, SetMaxShutter, to the AgcAlgorithm class. The IPA provides the maximum shutter speed for AGC calculations. This applies to both the manual and auto AGC modes. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-05ipa: raspberrypi: Limit the calculated vblank based on the sensor modeNaushir Patuck
The existing framerate/vblank calculations did not account for the sensor mode limits. This commit extracts vblank limits from the sensor v4l2 controls, and stores it in the camera modes structure. Exposure and vblank value calculations now use values clamped to the sensor mode limits. The libcamera::controls::FrameDurations metadata return values now reflect the minimum and maximum after clamping. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-05ipa: raspberrypi: Rename RPi::ConfigParameters enum valuesNaushir Patuck
Rename the enum values to indicate pipeline handler -> IPA actions (IPA_CONFIG_*) and IPA -> pipeline handler return results (IPA_RESULT_*). Additionally, provide more descriptive names for these values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-02ipa: raspberrypi: alsc: Fix copy-paste error in debug statementDavid Plowman
Reported-by: Coverity CID=309689 Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-02ipa: raspberrypi: Warn when control algorithms are missing; do not failDavid Plowman
Users are free to avoid loading certain control algorithms from the json tuning file if they wish, and this could mean that some libcamera controls will therefore not be available. Currently we don't have a good means of indicating which these are, therefore failing completely when an application tries to use one is unhelpful - it is better just to issue a warning. Note that once we can indicate this properly, applications should check for supported controls as this change may be reverted. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-01-29libcamera: raspberrypi: Switch to DelayedControlsNiklas Söderlund
Use the libcamera core helper DelayedControls instead of the local StaggeredCtrl. The new helper is modeled after the StaggeredCtrl implementation and behaves the same. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-26ipa: raspberrypi: Remove legacy Rasberry Pi loggingDavid Plowman
Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-26ipa: raspberrypi: Replace Raspberry Pi debug with libcamera debugDavid Plowman
This commit deals with all the "small" algorithms (that is, not Agc/Awb/Alsc). A few unnecessary debug messages have also been removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-26ipa: raspberrypi: awb: Replace Raspberry Pi debug with libcamera debugDavid Plowman
Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-26ipa: raspberrypi: alsc: Replace Raspberry Pi debug with libcamera debugDavid Plowman
Some unhelpful debug messages have been removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-26ipa: raspberrypi: controller: Replace Raspberry Pi debug with libcamera debugDavid Plowman
Some unhelpful debug statements have been removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-20ipa: raspberrypi: config: Update shutter speeds for imx219/477 and ov5647Naushir Patuck
Set the maximum shutter speed for the normal exposure profile to 66ms, allowing viewfinder framerates to go down to approx. 15fps. Set the maximum shutter speed for the sport exposure profile to 33ms, limiting the minimum framerate to approx. 30fps. Add a long exposure profile to allow shutter speeds of up to 120ms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-01-20libcamera: raspberrypi: Add control of sensor vblankingNaushir Patuck
Add support for setting V4L2_CID_VBLANK appropriately when setting V4L2_CID_EXPOSURE. This will allow adaptive framerates during viewfinder use cases (e.g. when the exposure time goes above 33ms, we can reduce the framerate to lower than 30fps). The minimum and maximum frame durations are provided via libcamera controls, and will prioritise exposure time limits over any AGC request. V4L2_CID_VBLANK is controlled through the staggered writer, just like the exposure and gain controls. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-20ipa: raspberrypi: Add digital gain to libcamera metadataDavid Plowman
The digital gain reported by the AGC algorithm is reported in the metadata that is included in completed requests. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-16ipa: raspberrypi: Only validate ISP and sensor control during configureNaushir Patuck
There is no need to validate all the ISP and sensor V4L2 control on every use. Simply validate them once during the IPA configuration, and fail if a required control is not available. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-16ipa: raspberrypi: Rename unicamCtrls_ to sensorCtrls_Naushir Patuck
These specific controls are part of the sensor device, so rename them appropriately. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-14libcamera: Replace ARRAY_SIZE() with std::size()Laurent Pinchart
C++17 has a std::size() function that returns the size of a C-style array. Use it instead of the custom ARRAY_SIZE macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-12-11ipa: raspberrypi: Move initial frame drop decision to AGC/AWBDavid Plowman
Previously the CamHelper was returning the number of frames to drop (on account of AGC/AWB converging). This wasn't really appropriate, it's better for the algorithms to do it as they know how many frames they might need. The CamHelper::HideFramesStartup method should now just be returning the number of frames to hide because they're bad/invalid in some way, not worrying about the AGC/AWB. For many sensors, the correct value for this is zero. But the ov5647 needs updating as it must return 2. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: Estimate the colour temerature if starting with fixed ↵David Plowman
colour gains When the AWB is started from "cold" with fixed colour gains, we try to estimate the colour temperature this corresponds to (if a calibrated CT curve was supplied). When fixed colour gains are set after the AWB has been running, we leave the CT estimate alone, as the one we have is probably sensible. This estimated colour is passed out in the metadata for other algorithms - notably ALSC - to use. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: Compute inverse of piecewise linear functionDavid Plowman
Add a method to the piecewise linear function (Pwl) class to compute the inverse of a given Pwl. If the input function is non-monotonic we can only produce a best effort "pseudo" inverse, and we signal this to the caller. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: awb: Add GetConvergenceFrames method to AWB base classDavid Plowman
We add a GetConvergenceFrames method to the AwbAlgorithm class which can be called when the AWB is started from scratch. It suggests how many frames should be dropped before displaying any (while the AWB converges). The Raspberry Pi specific implementation makes this customisable from the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11ipa: raspberrypi: agc: Add GetConvergenceFrames method to AGC base classDavid Plowman
We add a GetConvergenceFrames method to the AgcAlgorithm class which can be called when the AGC is started from scratch. It suggests how many frames should be dropped before displaying any (while the AGC converges). The Raspberry Pi specific implementation makes this customisable from the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-11libcamera: pipeline: raspberrypi: Pass the drop frame count in start, not ↵David Plowman
configure The number of frames to drop (not display) is passed back now from the start method, not configure. This means applications have a chance to set fixed exposure/gain before starting the camera and this can affect the frame drop count that is returned. Note how we need to be able to tell the very first time we start the camera from subsequent restarts, hence addition of the "firstStart_" flag. Both the IPA implementation file and the pipeline handler need matching modifications. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-08pipeline: ipa: raspberrypi: Pass controls to IPA on startNaushir Patuck
Forward any controls passed into the pipeline handler to the IPA. The IPA then sets up the Raspberry Pi controller with these settings appropriately, and passes back any V4L2 sensor controls that need to be applied. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-08libcamera: ipa: Pass a set of controls and return results from ipa::start()Naushir Patuck
This change allows controls passed into PipelineHandler::start to be forwarded onto IPAInterface::start(). We also add a return channel if the pipeline handler must action any of these controls, e.g. setting the analogue gain or shutter speed in the sensor device. The IPA interface wrapper isn't addressed as it will soon be replaced by a new mechanism to handle IPC. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-07pipeline: ipa: raspberrypi: Handle failures during IPA configurationNaushir Patuck
If the IPA fails during configuration, return an error flag to the pipeline handler and fail the use case gracefully. At present, the IPA configuration can fail for the following reasons: - The sensor is not recognised, and fails to open a CamHelper object. - The pipeline handler did not pass in controls for the ISP and sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: Fix initial AGC oscillation for imx219 sensorDavid Plowman
The exposure times in the exposure modes were causing AGC oscillations because the algorithm was demanding long unachievable exposure times but, without working sensor metadata, thought it was getting them when actually it was not. We fix it by making the exposure profile request only achievable exposure times, as we do for the ov5647 tuning. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: Improve behaviour when AE disabledDavid Plowman
AE/AGC "disabled" is now handled better by the algorithm for itself, so it no longer needs to be "resumed" before setting fixed shutter or gain values. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: agc: Make AGC handle Pause/Resume for itselfDavid Plowman
AGC, when paused, sets the last exposure/gain it wrote to be its "fixed" values and will therefore continue to return them. When resumed, we clear them so that both will float again. This approach is better because AGC can be paused and we can subsequently change (for example) the exposure and the gain won't float again. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: Avoid AGC filtering when both gain and shutter specifiedDavid Plowman
When both gain and shutter have been directly specified, do not filter slowly towards those target values, but adopt them immediately. This should match user expectations better. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>