summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/controller/rpi
AgeCommit message (Collapse)Author
2020-11-23libcamera: ipa: raspberrypi: awb: Add SwitchMode method to output AWB statusDavid Plowman
The Awb class now implements a SwitchMode method which outputs its AwbStatus for other algorithms to read, should they be interested. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Fetch AWB status only onceDavid Plowman
Introduce a function to fetch the AwbStatus (fetchAwbStatus), and call it unconditionally at the top of Prepare so that both Prepare and Process know thereafter that it's been done. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Improve centre-weighted luminance calucationDavid Plowman
Previously the calculation computed Y for each region before returning the weighted average, which "baked in" the over-importance of small statistics regions. The revised calculation will treat all pixels equally when the region weights are the same, making it easier to use. With the previous scheme, proper "average" metering was difficult to implement. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Rename method to divideUpExposureDavid Plowman
The method formerly known as divvyupExposure is given a more understandable name. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Remove unnecessary lockingDavid Plowman
On the libcamera/VC4 platform the AGC Prepare/Process methods, and any changes to the AGC settings, run synchronously - so a number of mutexes and copies are unnecessary and can be removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Use libcamera debugDavid Plowman
Replace Raspberry Pi debug with libcamera debug. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-21ipa: raspberrypi: Re-use iterator variableKieran Bingham
The function gauss_seidel2_SOR() makes use of a function scoped iterator 'i', for several loops, and has a precedence of re-using the function scoped iterator declaration in the majority of cases, except the first where it is declared in the loop scope before the function scope, and later which aliases a new declaration. Re-use the existing iterator variable for consistency, and to prevent variable aliasing. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-07ipa: raspberrypi: fix access to uninitialized variablesTomi Valkeinen
Set span_r and span_b to -1 so that when they are passed to Pwl::Eval() they won't cause access to uninitialized memory. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-09-29ipa: raspberrypi: Rename the controller namespace from Rpi to RpiControllerNaushir Patuck
This avoids a namespace clash with the RPi namespace used by the ipa and pipeline handlers, and cleans up the syntax slightly. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-09-29libcamera: ipa: raspberrypi: ALSC: Handle user transformDavid Plowman
Update ALSC (Auto Lens Shading Correction) to handle correctly the user transform now passed in the camera mode. The user transform is applied directly in the sensor so the image statistics already incorporate it, and the adaptive algorithm is entirely agnostic towards it, so all we have to do is flip the calibrated tables to match. (These tables will have been calibrated without the user transform.) Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-25ipa: raspberrypi: Replace void cast with [[maybe_unused]]Laurent Pinchart
The standard way in C++17 to specify that a function or function argument may be unused it to specify the [[maybe_unused]] attribute. Replace manual void casts to silence compiler warnings. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-08-25meson: Remove -Wno-unused-parameterLaurent Pinchart
We build libcamera with -Wno-unused-parameter and this doesn't cause much issue internally. However, it prevents catching unused parameters in inline functions defined in public headers. This can lead to compilation warnings for applications compiled without -Wno-unused-parameter. To catch those issues, remove -Wno-unused-parameter and fix all the related warnings with [[maybe_unused]]. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve behaviour when camera mode changesDavid Plowman
Now that we stop the asynchronous thread on a SwitchMode, we would do better to regenerate all the tables if the new camera mode crops in a significantly different way to the old one. A few minor tweaks make sense along with this: * Reset the lambda values when we reset everything. It wouldn't make sense to re-start with the old mode's values. * Use the last recorded colour temperature to generate new tables rather than any default value. * Set the frame "phase" counter to ensure the adaptive procedure will run asap. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Resample luminance tableDavid Plowman
This fixes a bug where the luminance correction table was not being resampled according to the camera mode, in the same way as the colour tables. This could be noticeable if any camera modes crop aggressively. This resampling can be done "up front" in the SwitchMode, as we have only a single fixed luminance table. In order to protect the recalculation of the table from the asynchronous thread (which reads it) I've elected to wait for that thread to go idle (though I doubt it would have mattered much). As a by-product of stopping the thread, it no longer needs its own copy of the camera mode (async_camera_mode_). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Improve locking in a few placesDavid Plowman
Fix up a few locations where we call notify_one() with the lock held. In particular, restartAsync does not need to be called with the lock held for its entire duration. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: ipa: raspberrypi: ALSC: Camera mode does not need to be atomicDavid Plowman
In the libcamera framework, SwitchMode (which overwrites the camera_mode) cannot run concurrently with Prepare (which uses it). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-03ipa: raspberrypi: Enable focus measure without recompileDavid Plowman
Previously, output of the focus measure could not be enabled without recompiling (because of the RPI_LOGGING_ENABLE macro). This uses the libcamera logging mechanism instead, so can be enabled/disabled at runtime. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25ipa: rpi: Add "focus" algorithmDavid Plowman
Adds FocusStatus to the image metadata, containing contrast measurements across the image. Optionally also prints a contrast measure to the console, to aid in manual adjustment of the lens. Note that it is not an actual auto-focus algorithm that can drive a lens! Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Add sharpness strength controlDavid Plowman
The sharpness control is, loosely speaking, a gain applied to the amount of sharpening added to an image. We also report the sharpness setting used back to the caller in metadata. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: ipa: raspberrypi: Make sharpening mode_factor an ordinary doubleDavid Plowman
No need for it to be std::atomic as SwitchMode runs synchronously with Prepare. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Recalculate camera exposure/gain when camera ↵David Plowman
mode changes This commit causes the AGC to recalculate its camera exposure/gain values when the camera mode changes. For example it's possible that the exposure profile could be changed by the application so the division between exposure time and analogue gain may be different. The other underlying reason (and which this commit accomplishes too) is that the sensor's line timing may change in a new mode, and because V4L2 drivers store a number of exposure _lines_, the resulting _time_ will "change under our feet". So we have to go through the process of recalculating the correct number of lines and writing this back to the sensor with every mode switch, regardless of anything else. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-22libcamera: ipa: raspberrypi: Allow SwitchMode method to return camera settingsDavid Plowman
This commit adds a Metadata parameter to the SwitchMode method enabling it to return camera and other settings to the caller (usually the configure method, just after the camera mode has been selected). In future this will allow the Raspberry Pi IPAs to take those settings (such as exposure and analogue gain) and program them directly into the camera or ISP before the camera is even started. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-11libcamera: ipa: Raspberry Pi IPANaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and associated libraries. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>