summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-08-16libcamera: pipeline_handler: Mark controls() and properties() as const ↵Niklas Söderlund
operations Reading the controls and properties does not modify the pipeline's state and can be marked as const operations. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-16libcamera: pipeline_handler: Add const version of cameraData()Niklas Söderlund
Add a version of cameraData() that returns a const pointer and mark it as a const operation. The assert in the non-const version of the function already enforces that a std::map::at() operation would always succeed so there is no change in operation from the non-const version. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-14libcamera: request: Make Stream pointer constNiklas Söderlund
The Stream pointer just acts as a key in the Request object. There is no good use-case to modify a stream from a pointer retrieved from the Request, make it const. This allows pipeline handlers to better express that the Stream pointer is retrieved in a Request should just be treated as a key. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-14libcamera: request: Declare a using directive for map of buffersNiklas Söderlund
Declare a using directive for the map of Stream to FrameBuffer. Update all users of Request::buffers() to use the new usage directive. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: buffer: Create a MappedBufferKieran Bingham
Provide a MappedFrameBuffer helper class which will map all of the Planes within a FrameBuffer and provide CPU addressable pointers for those planes. The MappedFrameBuffer implements the interface of the MappedBuffer allowing other buffer types to be constructed of the same form, with a common interface and cleanup. This allows MappedBuffer instances to be created from Camera3Buffer types. Mappings are removed upon destruction. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-06libcamera: formats: add numPlanes helperKieran Bingham
Determine the number of planes used by a format by counting the number of PixelFormatPlaneInfo entries with a valid entry. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-05libcamera: camera: Rename name() to id()Niklas Söderlund
Rename Camera::name() to camera::id() to better describe what it represents, a unique and stable ID for the camera. While at it improve the documentation for the camera ID to describe it needs to be stable for a camera between resets of the system. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: camera_sensor: Add accessors for sensor IDNiklas Söderlund
Add an accessors so that the sensor ID can be used outside CameraSensor. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: camera_sensor: Generate a sensor IDNiklas Söderlund
The ID is generated from information in the firmware description of the sensor if available or from module and model information if the sensor is virtual (for example VIMC). Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: v4l2_device: Add method to lookup device pathNiklas Söderlund
Add a method to lookup a V4L2 devices path in sysfs. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-05libcamera: sysfs: Add helper to lookup device firmware node pathNiklas Söderlund
A system's firmware description is recorded differently in sysfs depending if the system uses DT or ACPI. Add a helper to abstract this, allowing users not to care which of the two are used. For DT-based systems, the path is the full name of the DT node that represents the device. For ACPI-based systems, the path is the absolute namespace path to the ACPI object that represents the device. In both cases, the path is guaranteed to be unique and persistent as long as the system firmware is not modified. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-08-05libcamera: sysfs: Add helper to lookup sysfs path of a character deviceNiklas Söderlund
Add a helper function to lookup the sysfs path of a character device. Store the function in a new libcamera::sysfs namespace as there is not class to host it. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: pixel_format: Add a function to return format based on stringKaaira Gupta
Add a function which retrieves pixel format corresponding to its name from PixelFormatInfo. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: formats: PixelFormatInfo: Add name lookup functionKaaira Gupta
Add a function which returns PixelFormatInfo, given format name as a string. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-03libcamera: geometry: Add isNull() function to Rectangle classJacopo Mondi
It's common for code to check if a rectangle is null. Add a helper function to do so and test the function in test/geometry.cpp Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: utils: Add alignUp and alignDown functionsJacopo Mondi
Add to libcamera utils library two functions to round up or down a value to an alignment and add a test in test/utils.cpp for the two new functions. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-08-03libcamera: device_enumerator_udev: Align class final declaration with sysfs ↵Niklas Söderlund
subclass Instead of marking each individual overloaded function with final mark the whole class as final. This aligns the sysfs and udev based DeviceEnumerator implementations. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com>
2020-07-31libcamera: camera: Ensure deletion via deleteLater()Umang Jain
Object::deleteLater() ensures that the deletion of the Object takes place in a thread it is bound to. Deleting the Object in a different thread is a violation according to the libcamera threading model. On hot-unplug of a currently streaming camera, the last reference of Camera when dropped from the application thread (for e.g. QCam's thread), the destructor is then called from this thread. This is not allowed by the libcamera threading model. Camera is meant to be deleted in the thread it is bound to - in this case the CameraManager's thread. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-31libcamera: object: Add deleteLater() supportUmang Jain
This commit adds support to schedule the deletion of an Object to the thread it is bound to (similar to [1]). An Object getting destroyed by a different thread is considered as a violation as per the libcamera threading model. This will be useful for an Object where its ownership is shared via shared pointers in different threads. If the thread which drops the last reference of the Object is a different thread, the destructors get called in that particular thread, not the one Object is bound to. Hence, in order to resolve this kind of situation, the creation of shared pointer can be accompanied by a custom deleter which in turns use deleteLater() to ensure the Object is destroyed in its own thread. [1] https://doc.qt.io/qt-5/qobject.html#deleteLater Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-31libcamera: thread: Support selective message dispatch to threadUmang Jain
Extend the current dispatchMessages() to support dispatching of selective messsages according to the Message::Type passed in the function argument. dispatchMessages() can now be called explicitly to force deliver selected type's message to the thread for processing (typically when event loop is not running). Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-27include: drm_fourcc: Add 16-bit Bayer FourCCNiklas Söderlund
The patch trying to upstream Bayer formats to the DRM FourCC header file in Linux left out the 16-bit formats, add them. This addition will be included in the next version of the DRM Bayer patch sent out. Intention is to merge this in libcamera and update the header file once the upstream patch is picked up. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-25libcamera: raspberrypi: Add ColourCorrectionMatrix controlDavid Plowman
Implements, for the Raspberry Pi platform, the returning of the CCM (Colour Correction Matrix) used by the pipeline in the libcamera metadata. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-23libcamera: v4l2_videodevice: Add using statement for format mapNiklas Söderlund
Define a using statement for the format maps returned by V4L2Device::formats() and use it in all call sites. There is no functional change in this patch. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-23libcamera: formats: Remove ImageFormatsNiklas Söderlund
The ImageFormats helper class is not used anymore and can be removed. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-23libcamera: v4l2_subdevice: Replace ImageFormats with a mapNiklas Söderlund
Replace the V4L2Subdevice usage of the ImageFormats class with a std::map and the utils::map_keys() helper. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-17libcamera: pipeline: ipa: raspberrypi: Use dma heap allocs for LS tablesNaushir Patuck
Remove use of vcsm allocations and replace with dma heap allocations. The pipeline handler now passes the fd of the allocation over to the IPA instead of the raw pointer. Also use libcamera::FileDescriptor for fd lifetime management. This commit must be built alongside the accompanying BCM2835 ISP kernel driver changes at https://github.com/raspberrypi/linux/pull/3715. Otherwise a mismatch will cause undefined behavior. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-17include: linux: Add dma-buf.h and dma-heap.h UAPI headersNaushir Patuck
This commit adds the dmabuf UAPI headers from the mainline Linux kernel v5.6.19. They are required by the Raspberry Pi library for lens shading table allocations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-17libcamera: ipa_proxy: Allow stop() on a stopped IPALaurent Pinchart
To make error handling easier in callers, allow the stop() function to be called when the proxy is already stopped, or not started yet. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-17ipa: raspberrypi: Pass sensor config back from configure()Laurent Pinchart
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG frame action to send the sensor staggered write configuration to the pipeline handler when the IPA is configured. Replace this ad-hoc mechanism by passing the corresponding data back from the IPA to the pipeline handler through the configure() response. This allows synchronous handling of the response on the pipeline handler side. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17ipa: raspberrypi: Pass lens shading table through configure() functionLaurent Pinchart
The IPAInterface::configure() function now accepts custom configuration data. Use it to pass the lens shading table instead of using a custom IPA event. This will allow starting the IPA when starting the camera, instead of pre-starting it early in order to process the lens shading table allocation event. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2020-07-17libcamera: ipa_interface: Add support for custom IPA data to configure()Laurent Pinchart
Add two new parameters, ipaConfig and result, to the IPAInterface::configure() function to allow pipeline handlers to pass custom data to their IPA, and receive data back. Wire this through the code base. The C API interface will be addressed separately, likely through automation of the C <-> C++ translation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-15libcamera: file: Add read/write supportLaurent Pinchart
Add basic support to read and write data from/to a file, along with retrieving and setting the current read/write position. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Provide in-place versions of the Size helpersLaurent Pinchart
Add alignDownTo(), alignUpTo(), boundTo() and expandTo() helper functions to the Size class. These are in-place versions of the existing alignedDownTo(), alignedUpTo(), boundedTo() and expandedTo() functions. The new helpers return a reference to the size, to allow chaining the functions. One can thus write size.alignDownTo(16, 16).alignUpTo(32, 32) .boundTo({ 40, 80 }).expandTo({ 16, 80 }); instead of size.alignDownTo(16, 16); size.alignUpTo(32, 32); size.boundTo({ 40, 80 }); size.expandTo({ 16, 80 }); Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-15libcamera: geometry: Make Size and Rectangle usable as constexprLaurent Pinchart
There are use cases for declaring constexpr Size and Rectangle instances. Make it possible. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Turn Size and Rectangle into classesLaurent Pinchart
SizeRange is defined as a class while Size and Rectangle are defined as struct. This is confusing for users in forward declarations. Simplify it by turning both structures into classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Give constructors to RectangleLaurent Pinchart
Rectangle, unlike Size, has no constructor, requiring the users to explicitly initialize the instances. This is error-prone, add constructors. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Define Rectangle after SizeLaurent Pinchart
A subsequent change to the Rectangle will require the definition of the Size to be available. Define Rectangle after Size to ease review of that change. No code change is included. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-15libcamera: geometry: Add helper functions to the Size classLaurent Pinchart
Pipeline handlers commonly have to calculate the minimum or maximum of multiple sizes, or align a size's width and height. Add helper functions to the Size class to perform those tasks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-07-10libcamera: PixelFormatInfo: Add functions stride and frameSizePaul Elder
Add member functions to PixelFormatInfo for calculating stride and frame size. This will simplify existing code that calculates these things. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: StreamConfiguration: Add frameSize fieldPaul Elder
In addition to the stride field, we want the pipeline handler to be able to declare the frame size for the configuration. Add a frameSize field to StreamConfiguration for this purpose. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-10libcamera: formats: PixelFormatInfo: Add v4l2 lookup functionPaul Elder
Add a lookup function for PixelFormatInfo that takes a V4L2PixelFormat. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-10libcamera: V4L2VideoDevice: Add tryFormatPaul Elder
Add tryFormat and its variations (meta, single-plane, multi-plane) to V4L2VideoDevice. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-10libcamera: formats: Add fields to info to ease calculating stridePaul Elder
Packed formats make it difficult to calculate stride as well as frame size with the fields that PixelFormatInfo currently has. bitsPerPixel is defined as the average number of bits per pixel, and only counts effective bits, so it is not useful for calculating stride and frame size. To fix this, we introduce a concept of a "pixel group". The size of this group is defined as the minimum number of pixels (including padding) necessary in a row when the image has only one column of effective pixels. The pixel group has one more attribute, that is the "bytes per group". This determines how many bytes one pixel group consumes. These are the fields pixelsPerGroup and bytesPerGroup that are defined in this patch. Defining these two values makes it really simple to calculate bytes-per-line, as ceil(width / pixelsPerGroup) * bytesPerGroup, where width is measured in number of pixels. The ceiling accounts for padding. The pixel group has another contraint, which is that the pixel group (bytesPerGroup and pixelsPerGroup) is the smallest repeatable unit. What this means is that, for example, in the IPU3 formats, if there is only one column of effective pixels, it looks like it could be fit in 5 bytes with 3 padding pixels (for a total of 4 pixels over 5 bytes). However, this unit is not repeatable, as at the 7th group in the same row, the pattern is broken. Therefore, the pixel group for IPU3 formats must be 25 pixels over 32 bytes. Clearly, pixelsPerGroup must be constant for all planes in the format. The bytesPerGroup then, must be a per-plane attribute. There is one more field, verticalSubSampling, that is per-plane. This is simply a divider, to divide the number of rows of pixels by the sub-sampling value, to obtain the number of rows of pixels for the subsampled plane. For example, for something simple like BGR888, it is self-explanatory: the pixel group size is 1, and the bytes necessary is 3, and there is only one plane with no (= 1) vertical subsampling. For YUYV, the CbCr pair is shared between two pixels, so even if you have only one pixel, you would still need a padded second Y, therefore the pixel group size is 2, and bytes necessary is 4 (as opposed to 1 and 2). YUYV also has no vertical subsampling. NV12 has a pixel group size of 2 pixels, due to the CbCr plane. The bytes per group then, for both planes, is 2. The first plane has no vertical subsampling, but the second plane is subsampled by a factor of 2. The IPU3 formats are also self-explanatory, as they are single-planar, and have a pixel group size of 25, consuming 32 bytes. Although a comment in the driver suggests that it should be 50 and 64, respectively, this is an attribute of the driver, and not the format, so this shall be set by the ipu3 pipeline handler. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-07-09libcamera: utils: Add map_keys() functionLaurent Pinchart
Add a map_keys() function to the utils namespace to extract keys from a map. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Niklas: change return type to std::vector instead of std::set] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-07-06libcamera: camera: Allow unspecified roles for generateConfigurationKieran Bingham
Providing an empty set of roles is permitted to generate an empty configuration from the pipeline handlers. Overload the generateConfiguration() function such that not specifying a roles parameter will use an empty set, and return an empty configuration. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-06-29libcamera: geometry: Add isNull() function to Size classLaurent Pinchart
It's common for code to check if a size is null. Add a helper function to do so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-25libcamera: ipa: raspberrypi: Plumb in the libcamera sharpness controlDavid Plowman
This simply wires up the libcamera sharpness control in the Raspberry Pi IPAs so that it controls the strength of the Raspberry Pi sharpness control algorithm. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-25libcamera: pixel_format: Replace hex with format namesKaaira Gupta
Print format names defined in formats namespace instead of the hex values in toString() as they are easier to comprehend. For this add a property of 'name' in PixelFormatInfo' so as to map the formats with their names. Print fourcc for formats which are not used in libcamera. Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-06-18include: linux: Remove drm.h and drm_mode.hLaurent Pinchart
The drm.h and drm_mode.h headers are not used anymore, as drm_fourcc.h isn't included but only parsed by gen-formats.py. Remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-18libcamera: Replace explicit DRM FourCCs with libcamera formatsLaurent Pinchart
Use the new pixel format constants to replace usage of macros from drm_fourcc.h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>