| Age | Commit message (Collapse) | Author |
|---|
|
In C++, unlike in C, a function that takes no argument doesn't need to
specify void in the arguments list. Drop the unnecessary specifiers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Reading the controls and properties does not modify the camera's state
and can be marked as const operations.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
operations
Reading the controls and properties does not modify the pipeline's state
and can be marked as const operations.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a version of cameraData() that returns a const pointer and mark it
as a const operation. The assert in the non-const version of the
function already enforces that a std::map::at() operation would always
succeed so there is no change in operation from the non-const version.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Stream pointer just acts as a key in the Request object. There is no
good use-case to modify a stream from a pointer retrieved from the
Request, make it const. This allows pipeline handlers to better express
that the Stream pointer is retrieved in a Request should just be treated
as a key.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Declare a using directive for the map of Stream to FrameBuffer. Update
all users of Request::buffers() to use the new usage directive.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide a MappedFrameBuffer helper class which will map
all of the Planes within a FrameBuffer and provide CPU addressable
pointers for those planes.
The MappedFrameBuffer implements the interface of the MappedBuffer
allowing other buffer types to be constructed of the same form, with a
common interface and cleanup.
This allows MappedBuffer instances to be created from Camera3Buffer types.
Mappings are removed upon destruction.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Determine the number of planes used by a format by counting the number
of PixelFormatPlaneInfo entries with a valid entry.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Rename Camera::name() to camera::id() to better describe what it
represents, a unique and stable ID for the camera. While at it improve
the documentation for the camera ID to describe it needs to be stable
for a camera between resets of the system.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an accessors so that the sensor ID can be used outside CameraSensor.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ID is generated from information in the firmware description of the
sensor if available or from module and model information if the sensor
is virtual (for example VIMC).
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a method to lookup a V4L2 devices path in sysfs.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A system's firmware description is recorded differently in sysfs
depending if the system uses DT or ACPI. Add a helper to abstract
this, allowing users not to care which of the two are used.
For DT-based systems, the path is the full name of the DT node that
represents the device. For ACPI-based systems, the path is the absolute
namespace path to the ACPI object that represents the device. In both
cases, the path is guaranteed to be unique and persistent as long as the
system firmware is not modified.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a helper function to lookup the sysfs path of a character device.
Store the function in a new libcamera::sysfs namespace as there is not
class to host it.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a function which retrieves pixel format corresponding to its name
from PixelFormatInfo.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a function which returns PixelFormatInfo, given format name as
a string.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It's common for code to check if a rectangle is null. Add a helper function
to do so and test the function in test/geometry.cpp
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add to libcamera utils library two functions to round up or down a
value to an alignment and add a test in test/utils.cpp for the two
new functions.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
subclass
Instead of marking each individual overloaded function with final mark
the whole class as final. This aligns the sysfs and udev based
DeviceEnumerator implementations.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
|
|
Object::deleteLater() ensures that the deletion of the Object
takes place in a thread it is bound to. Deleting the Object
in a different thread is a violation according to the libcamera
threading model.
On hot-unplug of a currently streaming camera, the last reference
of Camera when dropped from the application thread (for e.g. QCam's
thread), the destructor is then called from this thread. This is not
allowed by the libcamera threading model. Camera is meant to be deleted
in the thread it is bound to - in this case the CameraManager's thread.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit adds support to schedule the deletion of an Object to the
thread it is bound to (similar to [1]). An Object getting destroyed
by a different thread is considered as a violation as per the
libcamera threading model.
This will be useful for an Object where its ownership is shared via
shared pointers in different threads. If the thread which drops the
last reference of the Object is a different thread, the destructors
get called in that particular thread, not the one Object is bound to.
Hence, in order to resolve this kind of situation, the creation of
shared pointer can be accompanied by a custom deleter which in turns
use deleteLater() to ensure the Object is destroyed in its own thread.
[1] https://doc.qt.io/qt-5/qobject.html#deleteLater
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Extend the current dispatchMessages() to support dispatching of
selective messsages according to the Message::Type passed in
the function argument. dispatchMessages() can now be called
explicitly to force deliver selected type's message to the
thread for processing (typically when event loop is not
running).
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The patch trying to upstream Bayer formats to the DRM FourCC header file
in Linux left out the 16-bit formats, add them. This addition will be
included in the next version of the DRM Bayer patch sent out.
Intention is to merge this in libcamera and update the header file once
the upstream patch is picked up.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implements, for the Raspberry Pi platform, the returning of the CCM
(Colour Correction Matrix) used by the pipeline in the libcamera
metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Define a using statement for the format maps returned by
V4L2Device::formats() and use it in all call sites. There is no
functional change in this patch.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ImageFormats helper class is not used anymore and can be removed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the V4L2Subdevice usage of the ImageFormats class with a
std::map and the utils::map_keys() helper.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Remove use of vcsm allocations and replace with dma heap allocations.
The pipeline handler now passes the fd of the allocation over to the IPA
instead of the raw pointer.
Also use libcamera::FileDescriptor for fd lifetime management.
This commit must be built alongside the accompanying BCM2835 ISP kernel
driver changes at https://github.com/raspberrypi/linux/pull/3715.
Otherwise a mismatch will cause undefined behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This commit adds the dmabuf UAPI headers from the mainline Linux kernel
v5.6.19. They are required by the Raspberry Pi library for lens shading
table allocations.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
To make error handling easier in callers, allow the stop() function to
be called when the proxy is already stopped, or not started yet.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG
frame action to send the sensor staggered write configuration to the
pipeline handler when the IPA is configured. Replace this ad-hoc
mechanism by passing the corresponding data back from the IPA to the
pipeline handler through the configure() response. This allows
synchronous handling of the response on the pipeline handler side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The IPAInterface::configure() function now accepts custom configuration
data. Use it to pass the lens shading table instead of using a custom
IPA event. This will allow starting the IPA when starting the camera,
instead of pre-starting it early in order to process the lens shading
table allocation event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add basic support to read and write data from/to a file, along with
retrieving and setting the current read/write position.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add alignDownTo(), alignUpTo(), boundTo() and expandTo() helper
functions to the Size class. These are in-place versions of the existing
alignedDownTo(), alignedUpTo(), boundedTo() and expandedTo() functions.
The new helpers return a reference to the size, to allow chaining the
functions. One can thus write
size.alignDownTo(16, 16).alignUpTo(32, 32)
.boundTo({ 40, 80 }).expandTo({ 16, 80 });
instead of
size.alignDownTo(16, 16);
size.alignUpTo(32, 32);
size.boundTo({ 40, 80 });
size.expandTo({ 16, 80 });
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are use cases for declaring constexpr Size and Rectangle
instances. Make it possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
SizeRange is defined as a class while Size and Rectangle are defined as
struct. This is confusing for users in forward declarations. Simplify it
by turning both structures into classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rectangle, unlike Size, has no constructor, requiring the users to
explicitly initialize the instances. This is error-prone, add
constructors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
A subsequent change to the Rectangle will require the definition of the
Size to be available. Define Rectangle after Size to ease review of that
change. No code change is included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Pipeline handlers commonly have to calculate the minimum or maximum of
multiple sizes, or align a size's width and height. Add helper functions
to the Size class to perform those tasks.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add member functions to PixelFormatInfo for calculating stride and frame
size. This will simplify existing code that calculates these things.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In addition to the stride field, we want the pipeline handler to be able
to declare the frame size for the configuration. Add a frameSize field
to StreamConfiguration for this purpose.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a lookup function for PixelFormatInfo that takes a V4L2PixelFormat.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add tryFormat and its variations (meta, single-plane, multi-plane) to
V4L2VideoDevice.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Packed formats make it difficult to calculate stride as well as
frame size with the fields that PixelFormatInfo currently has.
bitsPerPixel is defined as the average number of bits per pixel, and
only counts effective bits, so it is not useful for calculating
stride and frame size.
To fix this, we introduce a concept of a "pixel group". The size of this
group is defined as the minimum number of pixels (including padding)
necessary in a row when the image has only one column of effective
pixels. The pixel group has one more attribute, that is the "bytes per
group". This determines how many bytes one pixel group consumes. These
are the fields pixelsPerGroup and bytesPerGroup that are defined in this
patch. Defining these two values makes it really simple to calculate
bytes-per-line, as ceil(width / pixelsPerGroup) * bytesPerGroup, where
width is measured in number of pixels. The ceiling accounts for padding.
The pixel group has another contraint, which is that the pixel group
(bytesPerGroup and pixelsPerGroup) is the smallest repeatable unit. What
this means is that, for example, in the IPU3 formats, if there is only
one column of effective pixels, it looks like it could be fit in 5 bytes
with 3 padding pixels (for a total of 4 pixels over 5 bytes). However,
this unit is not repeatable, as at the 7th group in the same row, the
pattern is broken. Therefore, the pixel group for IPU3 formats must be
25 pixels over 32 bytes.
Clearly, pixelsPerGroup must be constant for all planes in the format.
The bytesPerGroup then, must be a per-plane attribute. There is one more
field, verticalSubSampling, that is per-plane. This is simply a divider,
to divide the number of rows of pixels by the sub-sampling value, to
obtain the number of rows of pixels for the subsampled plane.
For example, for something simple like BGR888, it is self-explanatory:
the pixel group size is 1, and the bytes necessary is 3, and there is
only one plane with no (= 1) vertical subsampling. For YUYV, the
CbCr pair is shared between two pixels, so even if you have only one
pixel, you would still need a padded second Y, therefore the pixel
group size is 2, and bytes necessary is 4 (as opposed to 1 and 2). YUYV
also has no vertical subsampling. NV12 has a pixel group size of 2
pixels, due to the CbCr plane. The bytes per group then, for both
planes, is 2. The first plane has no vertical subsampling, but the
second plane is subsampled by a factor of 2.
The IPU3 formats are also self-explanatory, as they are single-planar,
and have a pixel group size of 25, consuming 32 bytes. Although a
comment in the driver suggests that it should be 50 and 64,
respectively, this is an attribute of the driver, and not the format, so
this shall be set by the ipu3 pipeline handler.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a map_keys() function to the utils namespace to extract keys from a
map.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Niklas: change return type to std::vector instead of std::set]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Providing an empty set of roles is permitted to generate an empty
configuration from the pipeline handlers.
Overload the generateConfiguration() function such that not specifying a
roles parameter will use an empty set, and return an empty
configuration.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
It's common for code to check if a size is null. Add a helper function
to do so.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
This simply wires up the libcamera sharpness control in the Raspberry
Pi IPAs so that it controls the strength of the Raspberry Pi sharpness
control algorithm.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Print format names defined in formats namespace instead of the hex
values in toString() as they are easier to comprehend. For this add
a property of 'name' in PixelFormatInfo' so as to map the formats
with their names. Print fourcc for formats which are not used in
libcamera.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
