summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-10-20v4l2: Omit extra semicolonsHirokazu Honda
LOG_DECLARE_CATEGORY macro contains the semicolon. The end semicolon with the macro is unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-20test: Omit extra semicolonsHirokazu Honda
TEST_REGISTER macro is main function. The end semicolon with the macro is unnecessary. Signed-off-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-19include: linux: Update V4L2_CID_USER_BCM2835_ISP_BASE to match upstream treeNaushir Patuck
The V4L2_CID_USER_BCM2835_ISP_BASE has changed in the downstream Raspberry Pi 5.9 kernel to match the upstream defines, see here: https://github.com/raspberrypi/linux/pull/3897. Note, that this will cause an ABI breakage with the current downstream Raspberry Pi 5.4 kernel until both this change and the following PR has been merged: https://github.com/raspberrypi/linux/pull/3897 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-16android: jpeg: Port to PostProcessor interfaceUmang Jain
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg. This encapsulates the encoder and EXIF generation code into the PostProcessorJpeg layer and removes these specifics related to JPEG, from the CameraStream itself. Signed-off-by: Umang Jain <email@uajain.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
2020-10-16android: post_processor: Introduce a PostProcessor interfaceUmang Jain
Introduce a PostProcessor interface for the streams that require any kind of processing (refer to CameraStream::Type) for their consumption by the HAL layer. The PostProcessor interface can be configured via configure() and the actual processing can be initiated using process(). The post-processing layer can be extended to have multiple post processors for various stream configurations. As of now, we only have one post processor (JPEG), hence the subsequent commit will port its function to this interface. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-16android: CameraStream: Fix nitpick indentation for mutex_Umang Jain
Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-14android: camera_stream: Add documentationJacopo Mondi
Add a brief documentation block to the CameraStream class. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-14android: camera_device: Queue request using WorkerJacopo Mondi
Add a CameraWorker class member to the CameraDevice class and queue capture requests to it to delegate its handling. Start and stop the CameraWorker when the libcamera::Camera is started or stopped. Tie the CaptureRequest lifetime to the Camera3RequestDescriptor's one by storing it as unique_ptr<> in the descriptor to simplify handling of request creation and deletion. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-14android: camera_worker: Introduce CameraWorkerJacopo Mondi
The Android camera framework provides for each buffer part of a capture request an acquisition fence the camera HAL is supposed to wait on before using the buffer. As the libcamera HAL runs in the camera service thread, it is not possible to perform a synchronous wait there. Introduce a CameraWorker class that runs an internal thread to wait on a set of fences before queueing a capture request to the libcamera::Camera. Fences completion is handled through a simple poll, similar in implementation to the sync_wait() function provided by libdrm. Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-14libcamera: controls: Define AwbLocked controlJacopo Mondi
Define a control to report the AWB algorithm locking state. The control definition is copied from the AeLocked one. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-12cam: options: fix access to uninit variableTomi Valkeinen
operator[] doesn't check if the option exists in the values_ map, so it can return a pointer to location outside the map. Fix by returning an empty OptionValue if the option is not found. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust s_empty naming to 'empty'] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-12vimc: fix close(-1)Tomi Valkeinen
~IPAVimc() checks if fd != 0, but it should check if fd != -1. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-12cam: fix use of uninitialized fieldTomi Valkeinen
Initialize last_ to 0 to avoid uninitialized use. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-12meson: Enable -Wno-psabi for gcc 9+Tomi Valkeinen
I get the warnings related to psabi with: gcc 9.3.0 "arm-buildroot-linux-gnueabihf-g++.br_real (Buildroot 2020.08-24-gc5c5f1fa46) 9.3.0" Remove the check for gcc-9, so that -Wno-psabi is used on all gcc versions over 7.1. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-12libcamera: pipeline: simple: enable qcom-camssAndrey Konovalov
qcom-camss driver supports MIPI CSI2 receivers on APQ8016 and APQ8096 Application processors from Qualcomm, which are used on e.g. DragonBoard 410c and DragonBoard 820c dev boards respectively. The simple pipeline handler provides basic support for these devices. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-12libcamera, android, cam, gstreamer, qcam, v4l2: Reuse RequestPaul Elder
Allow reuse of the Request object by implementing reuse(). This means the applications now have the responsibility of freeing the Request objects, so make all libcamera users (cam, qcam, v4l2-compat, gstreamer, android) do so. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-10libcamera: pipeline: simple: enable mplane devices using contiguous memoryAndrey Konovalov
The current simple pipeline handler refuses to work with capture devices which have V4L2_CAP_VIDEO_CAPTURE_MPLANE flag set in the device capabilities field. This is too restrictive, as devices supporting the multi-planar API can be using contiguous memory for semi-planar and planar formats, and this would just work without any changes to libcamera. Drop the guard against MPLANE devices, and replace it with the check of the number of planes in the format the simple pipeline handler is going to use for capture. This will let MPLANE devices which don't use non-contiguous memory for frame buffers to work with the simple pipeline handler. The following code in SimpleCameraData::init() filters out the pixel formats libcamera doesn't support: PixelFormat pixelFormat = videoFormat.first.toPixelFormat(); if (!pixelFormat) continue; So the check for the number of memory planes this patch adds would not trigger until non-contiguous planar formats becomes supported in libcamera, and video devices using these formats are enabled in the simple pipeline handler. Then this check will remind one to review the simple pipeline handler code. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-10android: jpeg: Use LGPL-2.1 licenseUmang Jain
The jpeg components are licensed under GPL-2.0-or-later. This is an oversight and unvoluntary. License them under the LGPL-2.1-or-later as the rest of the camera HAL implementation. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-09test: span: Fix typo describing the dynamic span testPaul Elder
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-07android: camera_device: Clear streams_ at stop timeJacopo Mondi
When the CameraDevice is stopped, we need to clear the vector of CameraStream instances to make sure they get deleted and all the resources they have acquired get released. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Add stream mapping logJacopo Mondi
To ease following how Android streams get mapped to libcamera ones add a (quite verbose) printout before queueing a request to libcamera. The output looks like: 0 - (320x240)[0x00000022] -> (320x240)[NV12] (direct) 1 - (640x480)[0x00000021] -> (640x480)[NV12] (internal) Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Use CameraStream buffersJacopo Mondi
Now that CameraStream that require internal memory allocation have been instrumented with a FrameBuffer pool, use them to create intermediate buffers in the CameraDevice. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Create buffer poolJacopo Mondi
Add a FrameBufferAllocator class member to the CameraStream class. The allocator is constructed for CameraStream instances that needs internal allocation and automatically deleted. Allocate FrameBuffers using the allocator_ class member in the CameraStream class at CameraStream::configure() time and add two methods to the CameraStream class to get and put FrameBuffer pointers from the pool of allocated buffers. As buffer allocation can take place only after the Camera has been configured, move the CameraStream configuration loop in the CameraDevice class after camera_->configure() call. The newly created pool will be used to provide buffers to CameraStream that need to provide memory to libcamera where to deliver frames. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Make CameraStream configuration nicerJacopo Mondi
Loop over the CameraStream instances and use their interface to perform CameraStream configuration. Modify CameraStream::configure() to configure the android stream buffer count and to retrieve the StreamConfiguration by index instead of receiving it as a parameter. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Return Camera as shared_ptrJacopo Mondi
Return the Camera wrapped by the CameraDevice as a shared_ptr. This will be required to construct the FrameBuffer allocator in the CameraStream class. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Fetch format and size from configurationJacopo Mondi
Fetch the format and size of the libcamera::StreamConfiguration associated with a CameraStream by accessing the configuration by index. This removes the need to store the libcamera stream format and sizes as class members and avoid duplicating information that might get out of sync. It also allows to remove the StreamConfiguration from the constructor parameters list, as it can be identified by its index. While at it, re-order the constructor parameters order. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Retrieve Stream and ConfigurationJacopo Mondi
It's a common pattern to access the libcamera::Stream and libcamera::StreamConfiguration using the CameraStream instance's index. Add two methods to the CameraStream to shorten access to the two fields. This allows removing the index() method from the class interface. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_device: Move processing to CameraStreamJacopo Mondi
Move the JPEG processing procedure to the individual CameraStream by augmenting the class with a CameraStream::process() method. This allows removing the CameraStream::encoder() method. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Construct with Android streamJacopo Mondi
Pass the android camera3_stream_t, and a libcamera::StreamConfiguration to identify the source and destination parameters of this stream. Pass a CameraDevice pointer to the CameraStream constructor to allow retrieval of the StreamConfiguration associated with the CameraStream. Also change the format on which the CameraDevice performs checks to decide if post-processing is required, as the libcamera facing format is not meaningful anymore, but the Android requested format should be used instead. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Delegate Encoder constructionJacopo Mondi
Delegate the construction of the encoder to the CameraStream class for streams that need post-processing. Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Add CameraStream::TypeJacopo Mondi
Define the CameraStream::Type enumeration and assign it to each CameraStream instance at construction time. The CameraStream type will be used to decide if memory needs to be allocated on its behalf or if the stream is backed by memory externally allocated by the Android framework. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07android: camera_stream: Break out CameraStreamJacopo Mondi
Break CameraStream out of the CameraDevice class. No functional changes, only the code is moved. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07ipa: raspberrypi: fix access to uninitialized variablesTomi Valkeinen
Set span_r and span_b to -1 so that when they are passed to Pwl::Eval() they won't cause access to uninitialized memory. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-07ipa: raspberrypi: fix bin_x calculationTomi Valkeinen
I presume this code is supposed to set bin_x and bin_y, and not bin_y two times. This caused use of uninitialized variable later when bin_x was used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-07android: jpeg: exif: Sanitize ASCII strings with utils::toAscii()Umang Jain
Use the newly introduced utils::toAscii() utility to remove all non-ASCII characters for EXIF_FORMAT_ASCII strings. Signed-off-by: Umang Jain <email@uajain.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-07libcamera: PipelineHandler: Move printing pipeline names to CameraManagerPaul Elder
Since pipeline registration is done with declaring static factory objects, there is a risk that pipeline factories will be constructed before libcamera facilities are ready. For example, logging in the constructor of a pipeline handler factory may cause a segfault if threading isn't ready yet. Avoid this issue by moving printing the registration of the pipeline handler to the camera manager. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07libcamera: ProcessManager: make ProcessManager lifetime explicitly managedPaul Elder
If any Process instances are destroyed after the ProcessManager is destroyed, then a segfault will occur. Fix this by making the lifetime of the ProcessManager explicit, and make the CameraManager construct and deconstruct (automatically, via a member variable) the ProcessManager. Update the tests accordingly. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07Documentation: coding-style: Document global variable guidelinesPaul Elder
Document the issue related to global variable dependencies and how to avoid them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-07libcamera: file_descriptor: Remove spurious 'is'Jacopo Mondi
Remove a spurious 'is' is a comment block. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-10-07pipeline: ipa: raspberrypi: Switch to use C++17 features where possibleNaushir Patuck
With the recent change to use C++17, the following code changes can be made: - Use C++17 [[fallthough]] attribute instead of /* Fall through */. - Swap boost::any to std::any. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-04qcam: viewfinder_gl: Add shader to render packed YUV formatsLaurent Pinchart
The shader supports all 4 packed 8-bit YUV variants. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: viewfinder_gl: Merge the semi-planar UV and VU shadersLaurent Pinchart
Use macros to select the U and V pattern, to avoid code duplication between the two semi-planar shaders. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: viewfinder_gl: Support #define in shadersLaurent Pinchart
Prepare the infrastructure to support defining preprocessor macros in shaders: - Rename the fragmentShaderSrc_ member to fragmentShaderFile_ to reflect better that it contains a file name, not shader source code - Add a new fragmentShaderDefines_ member to store preprocessor macros - Prepend the macros to the shader source before compiling it Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: viewfinder_gl: Rename shader filesLaurent Pinchart
Rename shader files to prepare for packed YUYV support: - The NV prefix isn't a good match for packed (or for 3-planar) formats, replace it with a YUV prefix - Use .frag and .vert extensions to differentiate between fragment and vertex shaders Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: viewfinder_gl: Hardcode the vertex shader file nameLaurent Pinchart
The GL renderer uses the same vertex shader for all formats. Hardcode the file name instead of storing it in a member variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: viewfinder_gl: Don't store texture IDs in class membersLaurent Pinchart
The texture IDs can easily and cheaply be retrieved from the textures, there's no need to store them in class members. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-04qcam: Remove unneeded './' file prefix in *.qrcLaurent Pinchart
There's no need to prefix files in the local directory with './'. Drop it. While at it, add indentation to make the *.qrc files more readable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-10-02pipeline: raspberrypi: Sensor flips should be applied unconditionallyNaushir Patuck
The code in pipeline_handler::start() that applies the flips were in a block that was conditional on the RPi::IPA_CONFIG_STAGGERED_WRITE return result. This should be applied unconditionally. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-10-02qcam: dng_writer: Record camera modelNiklas Söderlund
Record the model property of the camera if available. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-10-02cam: Print user-friendly camera namesNiklas Söderlund
Instead of only printing the camera ID which is not intended for humans to read and parse create a more user-friendly string when printing camera names. The ID is still printed as it is one option used to select camera using the --camera option. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <email@uajain.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-05 13:56:29 +0000