summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-12include: android: Add Android headers from CrosJacopo Mondi
Copy the Android Camera3 HAL headers from the ChromiumOS build system and define a new inclusion directive in the meson build system for them. The header files have been copied from: https://chromium.googlesource.com/chromiumos/platform2 at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03 and provide: 1) Android CameraHAL3 HAL headers in include/android/hardware/ 2) The Android system headers in include/android/system/ 3) The Android camera metadata headers in include/android/metadata/ The original path in the Cros platform2/ repository is, respectively: camera/android/header_files/include/hardware camera/android/header_files/include/system camera/android/libcamera_metadata/include/ Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-12licenses: add Apache-2.0 licenseJacopo Mondi
All the Android camera stack code used by the libcamera camera HAL adaptation layer is licensed under the Apache-2.0 license. Add the Apache-2.0 license text to the licenses directory. The associated SPDX header is "Apache-2.0" and the license text is copied from: https://www.apache.org/licenses/LICENSE-2.0.txt Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-11tests: camera-sensor: Test using invalid media bus formatNiklas Söderlund
Linux commit b6c61a6c37317efd ("media: vimc: propagate pixel format in the stream") changes the sensor in the vimc media graph to accept all media bus format currently described in Linux. This prevents the camera-sensor test case to verify that a supported media bus format is selected from a list of defined formats, fix this by using an invalid media bus format in the test case. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-11tests: v4l2_videodevice: Set media bus and pixel formats for vimcNiklas Söderlund
Most of the video device tests are based on vimc and Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format") changes the default media bus format for the debayer subdevices. This leads to a -EPIPE error when trying to use the raw capture video device nodes. Fix this by explicitly setting media bus and pixel formats to known good values which works before and after the upstream change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-11libcamera: pipeline: vimc: Switch to using the RGB/YUV Capture video nodeNiklas Söderlund
Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format") which is part of v5.2 changes the default media bus format for the debayer subdevices. This leads to a -EPIPE error when trying to use the raw capture video device nodes. Fix this by moving the vimc pipeline to use the RGB/YUV Capture capture video node. As a consequence of this change the scaler in the vimc pipeline is used and a hard coded upscale of 3 is present in the video pipeline. This limits the sizes exposed and accepted by libcamera to multiples of 3. Update the buffer import test case to match this new format constraint by setting the resolution to 1920x1080, a resolution which works with both vimc and vivid. With this new resolution the buffer import test takes a bit more time to complete 60 buffers and it's runtime also needs to be increased. The raw capture video node still needs to be handled by the pipeline as its format needs to be updated to allow the pipeline format validation to pass. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-11libcamera: pipeline: vimc: Initialize device pointersNiklas Söderlund
As the device pointers are deleted in the pipelines destructor it's not a good idea to have them uninitialized. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-09libcamera: pipeline: RKISP1 configure isp output padHelen Koike
ISP output pad should be set to YUYV8_2X8 for non-bayer output format. Bayer formats are not listed in RkISP1CameraConfiguration::validate(), only non-bayer are listed, so we can set YUYV8_2X8 directly. This will need to be changed if we add support for bayer output with libcamera. Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-01libcamera: ipa_module: prevent uninitialised accessKieran Bingham
The IPAModule::loadIPAModuleInfo() function includes a *data pointer which is used as a null-pointer comparison in the error path with a conditional statement of "if (ret || !data)". The data variable is not initialised, and a single error path evaluates this as "if (true || uninitialised)". Whilst this error path does not incorrectly utilise the uninitialised data, as the ret evaluates to true already, it does leave a statement which includes an uninitialised variable. Help the static analysers by initialising the data variable when it is defined. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-01test: camera: buffer_import: clear video pointerKieran Bingham
The FrameSink::cleanup() call checks if video_ is set before cleaning up and then deleting the object. If the cleanup() call is called twice for any reason, this will encounter a use-after-free as the video_ pointer is not cleared after deletion. Whilst cleanup() is not currently called twice consecutively, to prevent errors in the future, make it explicit that the object has been deleted by clearing the stale pointer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-31libcamera: process: Fail loudly on isolateJacopo Mondi
Add an error debug message when disassociating part of a process execution context using unshare fails. As this is currently used to isolate a child process which is immediately terminated silently if unshare fails, add a debug printout and propagate up the error code to make the failure more visible. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-30libcamera: pipeline: ipu3: Fix argument name mismatchLaurent Pinchart
Fix an argument name mismatch between method declaration and definition. Reported-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-17test: logging: move logging tests to a subdirectoryPaul Elder
Since there are two logging tests now, move them to their own subdirectory. Update meson as necessary. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17test: logging: add logging process testPaul Elder
Add a test to test that logging works in isolated child processes. Only logSetFile is tested, because stdout and stderr are closed for isolated child processes, and syslog and the none logging destinations are expected to be the same as non-isolated processes. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17test: logging: add logSetStream testPaul Elder
Test the new logSetStream logging API call. Reorganize the logging API tests at the same time. logSetTarget for the syslog logging destination is not tested. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17libcamera: logging: add syslog, stream, and nowhere logging targetsPaul Elder
Allow logging to syslog, or any given ostream, or to nowhere. The logging API is updated to accomodate these new logging destinations. LogMessage is modified to allow this. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-17libcamera: ipu3: Do not re-queue cancelled buffersJacopo Mondi
When a video device is stopped all the buffers there queued are released and their state is set to BufferCancelled. Currently, on buffer completion, cancelled buffers are blindly re-queued to the ImgU input or CIO2 output devices, preventing them to be re-started succesfully in future capture sessions. Fix that by inspecting the buffers status and skip re-queueing if they're reported as cancelled. For the ImgU output buffer this is not required, as cancelled request should be reported to applications in order to report them failure of the capture operations. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-17libcamera: ipu3: Disable links at configure() timeJacopo Mondi
With the current IPU3 kernel driver implementation, a linked pipe shall be used (buffers should be queued on it) in order not to block all other pipes. Currently all links on the ImgU device are only disabled at match() time, implying that once an ImgU pipe gets linked, it should be used until the whole pipeline is not re-matched and links disabled again. This is a severe limitation for applications that wants to switch between cameras using different pipes going through a full library tear-down and reload. Perform link disabling at configure() time as well, so that a camera configuration operation always unlock the usage of the assigned pipe, regardless of the previously linked ones. Unfortunately this requires a camera start/stop sequence to always go through a configure step, a requirement that is not enforced by the Camera state machine. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-17libcamera: qcam: Allow specifying sizes on command lineJacopo Mondi
Add a '-s|--size' option to qcam to allow selecting the stream resolution using a command line option. If the sizes are not supported by the camera, they get automatically adjusted and the user notified via an output message. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-16libcamera: message: Add user message typesJacopo Mondi
Reserve identifiers for user-defined message types and add an operation to the Message class to register the type identifiers. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-16libcamera: message: Document Message::SignalMessageLaurent Pinchart
The SignalMessage type is undocumented. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-16libcamera: stream: Initialise pixelFormat in StreamConfiguration()Laurent Pinchart
To avoid depending on unitialised values, set the pixelFormat field of the StreamConfiguration class to 0 in the constructor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-16libcamera: pipeline: ipu3: Free internal buffers after stopping streamingLaurent Pinchart
The internal buffers between the CIO2 and ImgU are freed by the CIO2Device::stop() method, which is called first when stopping streaming. The ImgUDevice::stop() method is then called, and attempts to report completion for all queued buffers, which we have just freed. The use-after-free corrupts memory, leading to crashes. Fix this by moving the vector of internal buffers to the IPU3CameraData where it belongs, and free the buffers after stopping both devices. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-16libcamera: pipeline: ipu3: Initialise pixel format to NV12 in new configLaurent Pinchart
To avoid printing debugging messages related to stream configuration adjustement when generating a new configuration, set the pixel format explicitly instead of relying on the internal validate() call to do so. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-15libcamera: Fix spellings and grammarKieran Bingham
Fix a number of spelling errors and word duplications throughout the comments within libcamera. These were picked up with spellintian. Also one capitalisation of the first word of a \return statement picked up by checkstyle.py while creating this patch. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-14test: camera: Add buffer import and mapping testJacopo Mondi
Test buffer importing and mapping by streaming the VIMC camera to VIVID video output device performing zero-copy memory sharing using dmabuf file descriptors. The test cycle 20 buffers between the camera and the output with a 1:1 buffer index to dmabuf fd mapping, then randomises the mapping with the same number of buffers on each side for 20 more frames, to finally increase the number of buffers on the output side for the 20 last frames. No remapping of dmabuf fd to buffer index should occur for the first 40 frames. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: pipeline: Support importing buffersJacopo Mondi
Add support for importing external buffers in all pipeline handlers. Use the stream memory type in the pipeline handlers during buffer allocation to import buffers to or export buffers from the video device. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: stream: Map external buffers to indexesJacopo Mondi
Add and use an operation to assign to Buffer representing external memory locations an index at queueRequest() time. The index is used to identify the memory buffer to be queued to the video device once the buffer will be queued in a Request. In order to minimize relocations in the V4L2 backend, this method provides a best-effort caching mechanisms that attempts to reuse BufferMemory previously mapped to the buffer's dmabuf file descriptors, if any. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Add an accessor to the BufferMemoryLaurent Pinchart
Buffer instances reference memory, which is modelled internally by a BufferMemory instance. Store a pointer to the BufferMemory in the Buffer class, and populate it when the buffer is queued to the camera through a request. This is useful for applications to access the buffer memory in the buffer or request completion handler. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Add dmabuf file descriptorsJacopo Mondi
In addition to referencing buffer memory by index, add support to referencing it using dmabuf file descriptors. This will be used to reference buffer memory allocated outside of libcamera and import it. The dmabuf file descriptors are stored in an array in the Buffer class, and a new Stream::createBuffer() overload is added to construct a buffer from dmabuf file descriptor. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: stream: Add Stream memory typeJacopo Mondi
Define the memory type a Stream uses and allow application to set it through the associated StreamConfiguration. A Stream can use either internal or external memory allocation methods, depending on where the data produced by the stream is actually saved. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-14libcamera: stream: Shorten access to the bufferPoolJacopo Mondi
All interactions with the Stream's buffers currently go through the BufferPool. In order to shorten accessing the buffers array, and eventually restrict access to the Stream's internal buffer pool, provide operations to access, create and destroy buffers. It is still possible to access the pool for pipeline handlers to populate it by exporting buffers from a video device to Stream's pool. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: Stop using Stream::bufferPool to get the number of buffersLaurent Pinchart
The cam and qcam applications, as well as the camera capture test case, access the Stream::bufferPool in order to know how many requests to initially queue. As part of an effort to remove access to the buffer pool from applications, use the buffer count from the stream configuration instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: pipeline: ipu3: Use stream configuration to get buffers countLaurent Pinchart
Access the number of allocated buffer for the streams through the stream configuration instead of the stream's buffers pool. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: v4l2_videodevice: Signal buffer completion at streamoff timeLaurent Pinchart
When stopping the stream buffers have been queued, in which case their completion is never be notified to the user. This can lead to memory leaks. Fix it by notifying completion of all queued buffers with the status set to error. As a result the base PipelineHandler implementation can be simplified, as all requests complete as the result of stopping the stream. The stop() method that manually completes all queued requests isn't needed anymore. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Split memory information to BufferMemoryLaurent Pinchart
The Buffer class is a large beast the stores information about the buffer memory, dynamic metadata related to the frame stored in the buffer, and buffer reference data (in the index). In order to implement buffer import we will need to extend this with dmabuf file descriptors, making usage of the class even more complex. Refactor the Buffer class by splitting the buffer memory information to a BufferMemory class, and repurposing the Buffer class to reference a buffer and to store dynamic metadata. The BufferMemory class becomes a long term storage, valid and stable from the time buffer memory is allocated to the time it is freed. The Buffer class, on the other hand, becomes transient, is created on demand when an application requires a buffer, is given to a request, and is deleted when the request completes. Buffer and BufferMemory don't need to be copied, so their copy constructor and assignment operators are deleted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: v4l2_videodevice: Add helper to queue all buffersLaurent Pinchart
When starting the stream on a capture video device it is often needed to queue all the allocated buffers. Add a helper method to do so, and refactor the existing queueBuffer() method to make it clearer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: request: Add cookie to make request tracking easierLaurent Pinchart
Applications often have to map requests queued to a camera to external resources. To make this easy, add a 64-bit integer cookie to the Request class that is set when the request is created and can be retrieved at any time, especially in the request completion handler. The cookie is completely transparent for libcamera and is never modified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: pipeline_handler: Simplify request completionLaurent Pinchart
libcamera guarantees that requests complete in sequence. This requirement is currently pushed down to pipeline handlers. Three out of four of our pipeline handlers implement that requirement based on the sole assumption that buffers will always complete in sequeuence, while the IPU3 pipeline handler implements a more complex logic. It turns out that the logic can be moved to the base PipelineHandler class with support from the Request class. Do so to simplify the pipeline handlers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: camera: Don't check buffer count before freeing buffersLaurent Pinchart
There's no need to check if buffers have been allocated before freeing them as the BufferPool::destroyBuffers() method is a no-op when no buffers have been allocated. Document this fact explicitly, and remove the buffer count check. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: camera: Don't move buffers away from request at completionLaurent Pinchart
For a historical reason that isn't fully understood, the request completion handler in the Camera class moves all buffers away from the request's buffer map to a local variable before emitting the request completion signal. There's no reason to do so, and it makes it impossible for requests to access buffers in their destructor. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-13libcamera: utils: Add clamp()Niklas Söderlund
C++11 does not support std::clamp(), add a custom implementation in utils. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-13test: v4l2_videodevice: buffer_sharing: Lower resolution to speed up testLaurent Pinchart
Lower the resolution to the smallest vivid supports, 320x180, in order to speed up the test. This isn't enough in itself as the frame rate also has to be configured, but the V4L2VideoDevice class doesn't support frame rate control yet. In the meantime the frame rate can be set manually with yavta or v4l2-ctl. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2019-07-13libcamera: event_notifier_poll: Fix notifier unregistration during event ↵Laurent Pinchart
processing An event notifier may be unregistered from its activated signal. This can cause the notifiers set entry in notifiers_ to be deleted while processNotifiers() is looping over the notifiers_ map, leading to problems. To fix this, add a flag to the EventNotifierPoll class to indicate that event processing is in progress. If the flag is set, the notifiers_ entry is not deleted during notifier unregistration, but will be deleted by the event processing loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-13libcamera: ipa_module: Fix open source license verificationNiklas Söderlund
The second argument to std::array is the size of the array, not of the elements it contains. Fix this by turning the std::array into a simple array of const char pointers. Fixes: 099815b85377ac68 ("libcamera: ipa_module: add isOpenSource") Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2019-07-12libcamera: process: fix error checkingPaul Elder
The return value of a read() call is mistakenly checked for nonzero rather than less than zero. Fix this. Fixes: df23ab95f3d7 ("libcamera: process: fix compilation on Chromium OS") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2019-07-12test: logging: fix compilation on Chromium OSPaul Elder
Commit a25c937f8afe ("test: add logging API test") causes the build to fail in the Chromium OS build environment, because the return value of a function call marked with the __warn_unused_result__ attribute is ignored. Fix this. Fixes: a25c937f8afe ("test: add logging API test") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: process: fix compilation on Chromium OSPaul Elder
Commit 3d20beca6616 ("libcamera: Add Process and ProcessManager classes") causes the build to fail in the Chromium OS build environment, because the return values of some function calls marked with the __warn_unused_result__ attribute are ignored. Fix this. Fixes: 3d20beca6616 ("libcamera: Add Process and ProcessManager classes") Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: ipa: meson: build dummy IPA that needs isolationPaul Elder
Add the dummy IPA that needs isolation to meson. At the same time, clean up the IPA meson to facilitate adding more IPAs. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: ipa: add dummy IPA that needs to be isolatedPaul Elder
Add a dummy IPA that needs to be isolated. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-07-12libcamera: ipa_manager: use proxyPaul Elder
Make IPAManager isolate an IPA in a Proxy if the IPA's license is not open source, before returning the IPA to the caller. For now, only use the default Linux IPA proxy, and only LGPL 2.1+ is considered open source. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>