/src/qcam/assets/feathericons/

1455' href='#n1455'>1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 
/* SPDX-License-Identifier: LGPL-2.1-or-later */
/*
 * Copyright (C) 2019, Google Inc.
 *
 * v4l2_videodevice.cpp - V4L2 Video Device
 */

#include "libcamera/internal/v4l2_videodevice.h"

#include <algorithm>
#include <array>
#include <fcntl.h>
#include <iomanip>
#include <sstream>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/syscall.h>
#include <sys/time.h>
#include <unistd.h>
#include <vector>

#include <linux/version.h>

#include <libcamera/base/event_notifier.h>
#include <libcamera/base/log.h>
#include <libcamera/base/utils.h>

#include <libcamera/file_descriptor.h>

#include "libcamera/internal/formats.h"
#include "libcamera/internal/framebuffer.h"
#include "libcamera/internal/media_device.h"
#include "libcamera/internal/media_object.h"

/**
 * \file v4l2_videodevice.h
 * \brief V4L2 Video Device
 */

namespace libcamera {

LOG_DECLARE_CATEGORY(V4L2)

/**
 * \struct V4L2Capability
 * \brief struct v4l2_capability object wrapper and helpers
 *
 * The V4L2Capability structure manages the information returned by the
 * VIDIOC_QUERYCAP ioctl.
 */

/**
 * \fn V4L2Capability::driver()
 * \brief Retrieve the driver module name
 * \return The string containing the name of the driver module
 */

/**
 * \fn V4L2Capability::card()
 * \brief Retrieve the video device card name
 * \return The string containing the video device name
 */

/**
 * \fn V4L2Capability::bus_info()
 * \brief Retrieve the location of the video device in the system
 * \return The string containing the video device location
 */

/**
 * \fn V4L2Capability::device_caps()
 * \brief Retrieve the capabilities of the video device
 * \return The video device specific capabilities if V4L2_CAP_DEVICE_CAPS is
 * set or driver capabilities otherwise
 */

/**
 * \fn V4L2Capability::isMultiplanar()
 * \brief Identify if the video device implements the V4L2 multiplanar APIs
 * \return True if the video device supports multiplanar APIs
 */

/**
 * \fn V4L2Capability::isCapture()
 * \brief Identify if the video device captures data
 * \return True if the video device can capture data
 */

/**
 * \fn V4L2Capability::isOutput()
 * \brief Identify if the video device outputs data
 * \return True if the video device can output data
 */

/**
 * \fn V4L2Capability::isVideo()
 * \brief Identify if the video device captures or outputs images
 * \return True if the video device can capture or output images
 */

/**
 * \fn V4L2Capability::isM2M()
 * \brief Identify if the device is a Memory-to-Memory device
 * \return True if the device can capture and output images using the M2M API
 */

/**
 * \fn V4L2Capability::isMeta()
 * \brief Identify if the video device captures or outputs image meta-data
 * \return True if the video device can capture or output image meta-data
 */

/**
 * \fn V4L2Capability::isVideoCapture()
 * \brief Identify if the video device captures images
 * \return True if the video device can capture images
 */

/**
 * \fn V4L2Capability::isVideoOutput()
 * \brief Identify if the video device outputs images
 * \return True if the video device can output images
 */

/**
 * \fn V4L2Capability::isMetaCapture()
 * \brief Identify if the video device captures image meta-data
 * \return True if the video device can capture image meta-data
 */

/**
 * \fn V4L2Capability::isMetaOutput()
 * \brief Identify if the video device outputs image meta-data
 * \return True if the video device can output image meta-data
 */

/**
 * \fn V4L2Capability::hasStreaming()
 * \brief Determine if the video device can perform Streaming I/O
 * \return True if the video device provides Streaming I/O IOCTLs
 */

/**
 * \fn V4L2Capability::hasMediaController()
 * \brief Determine if the video device uses Media Controller to configure I/O
 * \return True if the video device is controlled by a Media Controller device
 */

/**
 * \class V4L2BufferCache
 * \brief Hot cache of associations between V4L2 buffer indexes and FrameBuffer
 *
 * When importing buffers, V4L2 performs lazy mapping of dmabuf instances at
 * VIDIOC_QBUF (or VIDIOC_PREPARE_BUF) time and keeps the mapping associated
 * with the V4L2 buffer, as identified by its index. If the same V4L2 buffer is
 * then reused and queued with different dmabufs, the old dmabufs will be
 * unmapped and the new ones mapped. To keep this process efficient, it is
 * crucial to consistently use the same V4L2 buffer for given dmabufs through
 * the whole duration of a capture cycle.
 *
 * The V4L2BufferCache class keeps a map of previous dmabufs to V4L2 buffer
 * index associations to help selecting V4L2 buffers. It tracks, for every
 * entry, if the V4L2 buffer is in use, and offers lookup of the best free V4L2
 * buffer for a set of dmabufs.
 */

/**
 * \brief Create an empty cache with \a numEntries entries
 * \param[in] numEntries Number of entries to reserve in the cache
 *
 * Create a cache with \a numEntries entries all marked as unused. The entries
 * will be populated as the cache is used. This is typically used to implement
 * buffer import, with buffers added to the cache as they are queued.
 */
V4L2BufferCache::V4L2BufferCache(unsigned int numEntries)
	: lastUsedCounter_(1), missCounter_(0)
{
	cache_.resize(numEntries);
}

/**
 * \brief Create a pre-populated cache
 * \param[in] buffers Array of buffers to pre-populated with
 *
 * Create a cache pre-populated with \a buffers. This is typically used to
 * implement buffer export, with all buffers added to the cache when they are
 * allocated.
 */
V4L2BufferCache::V4L2BufferCache(const std::vector<std::unique_ptr<FrameBuffer>> &buffers)
	: lastUsedCounter_(1), missCounter_(0)
{
	for (const std::unique_ptr<FrameBuffer> &buffer : buffers)
		cache_.emplace_back(true,
				    lastUsedCounter_.fetch_add(1, std::memory_order_acq_rel),
				    *buffer.get());
}

V4L2BufferCache::~V4L2BufferCache()
{
	if (missCounter_ > cache_.size())
		LOG(V4L2, Debug) << "Cache misses: " << missCounter_;
}

/**
 * \brief Find the best V4L2 buffer for a FrameBuffer
 * \param[in] buffer The FrameBuffer
 *
 * Find the best V4L2 buffer index to be used for the FrameBuffer \a buffer
 * based on previous mappings of frame buffers to V4L2 buffers. If a free V4L2
 * buffer previously used with the same dmabufs as \a buffer is found in the
 * cache, return its index. Otherwise return the index of the first free V4L2
 * buffer and record its association with the dmabufs of \a buffer.
 *
 * \return The index of the best V4L2 buffer, or -ENOENT if no free V4L2 buffer
 * is available
 */
int V4L2BufferCache::get(const FrameBuffer &buffer)
{
	bool hit = false;
	int use = -1;
	uint64_t oldest = UINT64_MAX;

	for (unsigned int index = 0; index < cache_.size(); index++) {
		const Entry &entry = cache_[index];

		if (!entry.free_)
			continue;

		/* Try to find a cache hit by comparing the planes. */
		if (entry == buffer) {
			hit = true;
			use = index;
			break;
		}

		if (entry.lastUsed_ < oldest) {
			use = index;
			oldest = entry.lastUsed_;
		}
	}

	if (!hit)
		missCounter_++;

	if (use < 0)
		return -ENOENT;

	cache_[use] = Entry(false,
			    lastUsedCounter_.fetch_add(1, std::memory_order_acq_rel),
			    buffer);

	return use;
}

/**
 * \brief Mark buffer \a index as free in the cache
 * \param[in] index The V4L2 buffer index
 */
void V4L2BufferCache::put(unsigned int index)
{
	ASSERT(index < cache_.size());
	cache_[index].free_ = true;
}

V4L2BufferCache::Entry::Entry()
	: free_(true), lastUsed_(0)
{
}

V4L2BufferCache::Entry::Entry(bool free, uint64_t lastUsed, const FrameBuffer &buffer)
	: free_(free), lastUsed_(lastUsed)
{
	for (const FrameBuffer::Plane &plane : buffer.planes())
		planes_.emplace_back(plane);
}

bool V4L2BufferCache::Entry::operator==(const FrameBuffer &buffer) const
{
	const std::vector<FrameBuffer::Plane> &planes = buffer.planes();

	if (planes_.size() != planes.size())
		return false;

	for (unsigned int i = 0; i < planes.size(); i++)
		if (planes_[i].fd != planes[i].fd.fd() ||
		    planes_[i].length != planes[i].length)
			return false;
	return true;
}

/**
 * \class V4L2DeviceFormat
 * \brief The V4L2 video device image format and sizes
 *
 * This class describes the image format and resolution to be programmed on a
 * V4L2 video device. The image format is defined by a fourcc code (as specified
 * by the V4L2 API with the V4L2_PIX_FMT_* macros), a resolution (width and
 * height) and one to three planes with configurable line stride and a total
 * per-plane size in bytes.
 *
 * Image formats, as defined by the V4L2 APIs, are categorised as packed,
 * semi-planar and planar, and describe the layout of the image pixel components
 * stored in memory.
 *
 * Packed image formats store pixel components one after the other, in a
 * contiguous memory area. Examples of packed image formats are YUYV
 * permutations, RGB with different pixel sub-sampling ratios such as RGB565 or
 * RGB666 or Raw-Bayer formats such as SRGGB8 or SGRBG12.
 *
 * Semi-planar and planar image formats store the pixel components in separate
 * and possibly non-contiguous memory areas, named planes, whose sizes depend on
 * the pixel components sub-sampling ratios, which are defined by the format.
 * Semi-planar formats use two planes to store pixel components and notable
 * examples of such formats are the NV12 and NV16 formats, while planar formats
 * use three planes to store pixel components and notable examples are YUV422
 * and YUV420.
 *
 * Image formats supported by the V4L2 API are defined and described in Section
 * number 2 of the "Part I - Video for Linux API" chapter of the "Linux Media
 * Infrastructure userspace API", part of the Linux kernel documentation.
 *
 * In the context of this document, packed image formats are referred to as
 * "packed formats" and semi-planar and planar image formats are referred to as
 * "planar formats".
 *
 * V4L2 also defines two different sets of APIs to work with devices that store
 * planes in contiguous or separate memory areas. They are named "Single-plane
 * APIs" and "Multi-plane APIs" respectively and are documented in Section 2.1
 * and Section 2.2 of the above mentioned "Part I - Video for Linux API"
 * documentation.
 *
 * The single-plane API allows, among other parameters, the configuration of the
 * image resolution, the pixel format and the stride length. In that case the
 * stride applies to all planes (possibly sub-sampled). The multi-plane API
 * allows configuring the resolution, the pixel format and a per-plane stride
 * length and total size.
 *
 * Packed image formats, which occupy a single memory area, are easily described
 * through the single-plane API. When used on a video device that implements the
 * multi-plane API, only the size and stride information contained in the first
 * plane are taken into account.
 *
 * Planar image formats, which occupy distinct memory areas, are easily
 * described through the multi-plane APIs. When used on a video device that
 * implements the single-plane API, all planes are stored one after the other
 * in a contiguous memory area, and it is not possible to configure per-plane
 * stride length and size, but only a global stride length which is applied to
 * all planes.
 *
 * The V4L2DeviceFormat class describes both packed and planar image formats,
 * regardless of the API type (single or multi plane) implemented by the video
 * device the format has to be applied to. The total size and bytes per line
 * of images represented with packed formats are configured using the first
 * entry of the V4L2DeviceFormat::planes array, while the per-plane size and
 * per-plane stride length of images represented with planar image formats are
 * configured using the opportune number of entries of the
 * V4L2DeviceFormat::planes array, as prescribed by the image format
 * definition (semi-planar formats use 2 entries, while planar formats use the
 * whole 3 entries). The number of valid entries of the
 * V4L2DeviceFormat::planes array is defined by the
 * V4L2DeviceFormat::planesCount value.
 */

/**
 * \struct V4L2DeviceFormat::Plane
 * \brief Per-plane memory size information
 * \var V4L2DeviceFormat::Plane::size
 * \brief The plane total memory size (in bytes)
 * \var V4L2DeviceFormat::Plane::bpl
 * \brief The plane line stride (in bytes)
 */

/**
 * \var V4L2DeviceFormat::size
 * \brief The image size in pixels
 */

/**
 * \var V4L2DeviceFormat::fourcc
 * \brief The fourcc code describing the pixel encoding scheme
 *
 * The fourcc code, as defined by the V4L2 API with the V4L2_PIX_FMT_* macros,
 * that identifies the image format pixel encoding scheme.
 */

/**
 * \var V4L2DeviceFormat::planes
 * \brief The per-plane memory size information
 *
 * Images are stored in memory in one or more data planes. Each data plane has a
 * specific line stride and memory size, which could differ from the image
 * visible sizes to accommodate padding at the end of lines and end of planes.
 * Only the first \ref planesCount entries are considered valid.
 */

/**
 * \var V4L2DeviceFormat::planesCount
 * \brief The number of valid data planes
 */

/**
 * \brief Assemble and return a string describing the format
 * \return A string describing the V4L2DeviceFormat
 */
const std::string V4L2DeviceFormat::toString() const
{
	std::stringstream ss;
	ss << size.toString() << "-" << fourcc.toString();
	return ss.str();
}

/**
 * \class V4L2VideoDevice
 * \brief V4L2VideoDevice object and API
 *
 * The V4L2VideoDevice class models an instance of a V4L2 video device.
 * It is constructed with the path to a V4L2 video device node. The device node
 * is only opened upon a call to open() which must be checked for success.
 *
 * The video device capabilities are validated when the device is opened and the
 * device is rejected if it is not a suitable V4L2 capture or output video
 * device, or if the video device does not support streaming I/O.
 *
 * No API call other than open(), isOpen() and close() shall be called on an
 * unopened device instance.
 *
 * The V4L2VideoDevice class supports the V4L2 MMAP and DMABUF memory types:
 *
 * - The allocateBuffers() function wraps buffer allocation with the V4L2 MMAP
 *   memory type. It requests buffers from the driver, allocating the
 *   corresponding memory, and exports them as a set of FrameBuffer objects.
 *   Upon successful return the driver's internal buffer management is
 *   initialized in MMAP mode, and the video device is ready to accept
 *   queueBuffer() calls.
 *
 *   This is the most traditional V4L2 buffer management, and is mostly useful
 *   to support internal buffer pools in pipeline handlers, either for CPU
 *   consumption (such as statistics or parameters pools), or for internal
 *   image buffers shared between devices.
 *
 * - The exportBuffers() function operates similarly to allocateBuffers(), but
 *   leaves the driver's internal buffer management uninitialized. It uses the
 *   V4L2 buffer orphaning support to allocate buffers with the MMAP method,
 *   export them as a set of FrameBuffer objects, and reset the driver's
 *   internal buffer management. The video device shall be initialized with
 *   importBuffers() or allocateBuffers() before it can accept queueBuffer()
 *   calls. The exported buffers are directly usable with any V4L2 video device
 *   in DMABUF mode, or with other dmabuf importers.
 *
 *   This method is mostly useful to implement buffer allocation helpers or to
 *   allocate ancillary buffers, when a V4L2 video device is used in DMABUF
 *   mode but no other source of buffers is available. An example use case
 *   would be allocation of scratch buffers to be used in case of buffer
 *   underruns on a video device that is otherwise supplied with external
 *   buffers.
 *
 * - The importBuffers() function initializes the driver's buffer management to
 *   import buffers in DMABUF mode. It requests buffers from the driver, but
 *   doesn't allocate memory. Upon successful return, the video device is ready
 *   to accept queueBuffer() calls. The buffers to be imported are provided to
 *   queueBuffer(), and may be supplied externally, or come from a previous
 *   exportBuffers() call.
 *
 *   This is the usual buffers initialization method for video devices whose
 *   buffers are exposed outside of libcamera. It is also typically used on one
 *   of the two video device that participate in buffer sharing inside
 *   pipelines, the other video device typically using allocateBuffers().
 *
 * - The releaseBuffers() function resets the driver's internal buffer
 *   management that was initialized by a previous call to allocateBuffers() or
 *   importBuffers(). Any memory allocated by allocateBuffers() is freed.
 *   Buffer exported by exportBuffers() are not affected by this function.
 *
 * The V4L2VideoDevice class tracks queued buffers and handles buffer events. It
 * automatically dequeues completed buffers and emits the \ref bufferReady
 * signal.
 *
 * Upon destruction any device left open will be closed, and any resources
 * released.
 *
 * \context This class is \threadbound.
 */

/**
 * \typedef V4L2VideoDevice::Formats
 * \brief A map of supported V4L2 pixel formats to frame sizes
 */

/**
 * \brief Construct a V4L2VideoDevice
 * \param[in] deviceNode The file-system path to the video device node
 */
V4L2VideoDevice::V4L2VideoDevice(const std::string &deviceNode)
	: V4L2Device(deviceNode), formatInfo_(nullptr), cache_(nullptr),
	  fdBufferNotifier_(nullptr), streaming_(false)
{
	/*
	 * We default to an MMAP based CAPTURE video device, however this will
	 * be updated based upon the device capabilities.
	 */
	bufferType_ = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
	memoryType_ = V4L2_MEMORY_MMAP;
}

/**
 * \brief Construct a V4L2VideoDevice from a MediaEntity
 * \param[in] entity The MediaEntity to build the video device from
 *
 * Construct a V4L2VideoDevice from a MediaEntity's device node path.
 */
V4L2VideoDevice::V4L2VideoDevice(const MediaEntity *entity)
	: V4L2VideoDevice(entity->deviceNode())
{
}

V4L2VideoDevice::~V4L2VideoDevice()
{
	close();
}

/**
 * \brief Open the V4L2 video device node and query its capabilities
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::open()
{
	int ret;

	ret = V4L2Device::open(O_RDWR | O_NONBLOCK);
	if (ret < 0)
		return ret;

	ret = ioctl(VIDIOC_QUERYCAP, &caps_);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to query device capabilities: "
			<< strerror(-ret);
		return ret;
	}

	if (caps_.version < KERNEL_VERSION(5, 0, 0)) {
		LOG(V4L2, Error)
			<< "V4L2 API v" << (caps_.version >> 16)
			<< "." << ((caps_.version >> 8) & 0xff)
			<< "." << (caps_.version & 0xff)
			<< " too old, v5.0.0 or later is required";
		return -EINVAL;
	}

	if (!caps_.hasStreaming()) {
		LOG(V4L2, Error) << "Device does not support streaming I/O";
		return -EINVAL;
	}

	/*
	 * Set buffer type and wait for read notifications on CAPTURE video
	 * devices (POLLIN), and write notifications for OUTPUT video devices
	 * (POLLOUT).
	 */
	EventNotifier::Type notifierType;

	if (caps_.isVideoCapture()) {
		notifierType = EventNotifier::Read;
		bufferType_ = caps_.isMultiplanar()
			    ? V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
			    : V4L2_BUF_TYPE_VIDEO_CAPTURE;
	} else if (caps_.isVideoOutput()) {
		notifierType = EventNotifier::Write;
		bufferType_ = caps_.isMultiplanar()
			    ? V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE
			    : V4L2_BUF_TYPE_VIDEO_OUTPUT;
	} else if (caps_.isMetaCapture()) {
		notifierType = EventNotifier::Read;
		bufferType_ = V4L2_BUF_TYPE_META_CAPTURE;
	} else if (caps_.isMetaOutput()) {
		notifierType = EventNotifier::Write;
		bufferType_ = V4L2_BUF_TYPE_META_OUTPUT;
	} else {
		LOG(V4L2, Error) << "Device is not a supported type";
		return -EINVAL;
	}

	fdBufferNotifier_ = new EventNotifier(fd(), notifierType);
	fdBufferNotifier_->activated.connect(this, &V4L2VideoDevice::bufferAvailable);
	fdBufferNotifier_->setEnabled(false);

	LOG(V4L2, Debug)
		<< "Opened device " << caps_.bus_info() << ": "
		<< caps_.driver() << ": " << caps_.card();

	ret = getFormat(&format_);
	if (ret) {
		LOG(V4L2, Error) << "Failed to get format";
		return ret;
	}

	formatInfo_ = &PixelFormatInfo::info(format_.fourcc);

	return 0;
}

/**
 * \brief Open a V4L2 video device from an opened file handle and query its
 * capabilities
 * \param[in] handle The file descriptor to set
 * \param[in] type The device type to operate on
 *
 * This function opens a video device from the existing file descriptor \a
 * handle. Like open(), this function queries the capabilities of the device,
 * but handles it according to the given device \a type instead of determining
 * its type from the capabilities. This can be used to force a given device type
 * for memory-to-memory devices.
 *
 * The file descriptor \a handle is duplicated, and the caller is responsible
 * for closing the \a handle when it has no further use for it. The close()
 * function will close the duplicated file descriptor, leaving \a handle
 * untouched.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::open(int handle, enum v4l2_buf_type type)
{
	int ret;
	int newFd;

	newFd = dup(handle);
	if (newFd < 0) {
		ret = -errno;
		LOG(V4L2, Error) << "Failed to duplicate file handle: "
				 << strerror(-ret);
		return ret;
	}

	ret = V4L2Device::setFd(newFd);
	if (ret < 0) {
		LOG(V4L2, Error) << "Failed to set file handle: "
				 << strerror(-ret);
		::close(newFd);
		return ret;
	}

	ret = ioctl(VIDIOC_QUERYCAP, &caps_);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to query device capabilities: "
			<< strerror(-ret);
		return ret;
	}

	if (!caps_.hasStreaming()) {
		LOG(V4L2, Error) << "Device does not support streaming I/O";
		return -EINVAL;
	}

	/*
	 * Set buffer type and wait for read notifications on CAPTURE video
	 * devices (POLLIN), and write notifications for OUTPUT video devices
	 * (POLLOUT).
	 */
	EventNotifier::Type notifierType;

	switch (type) {
	case V4L2_BUF_TYPE_VIDEO_OUTPUT:
		notifierType = EventNotifier::Write;
		bufferType_ = caps_.isMultiplanar()
			    ? V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE
			    : V4L2_BUF_TYPE_VIDEO_OUTPUT;
		break;
	case V4L2_BUF_TYPE_VIDEO_CAPTURE:
		notifierType = EventNotifier::Read;
		bufferType_ = caps_.isMultiplanar()
			    ? V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE
			    : V4L2_BUF_TYPE_VIDEO_CAPTURE;
		break;
	default:
		LOG(V4L2, Error) << "Unsupported buffer type";
		return -EINVAL;
	}

	fdBufferNotifier_ = new EventNotifier(fd(), notifierType);
	fdBufferNotifier_->activated.connect(this, &V4L2VideoDevice::bufferAvailable);
	fdBufferNotifier_->setEnabled(false);

	LOG(V4L2, Debug)
		<< "Opened device " << caps_.bus_info() << ": "
		<< caps_.driver() << ": " << caps_.card();

	ret = getFormat(&format_);
	if (ret) {
		LOG(V4L2, Error) << "Failed to get format";
		return ret;
	}

	formatInfo_ = &PixelFormatInfo::info(format_.fourcc);

	return 0;
}

/**
 * \brief Close the video device, releasing any resources acquired by open()
 */
void V4L2VideoDevice::close()
{
	if (!isOpen())
		return;

	releaseBuffers();
	delete fdBufferNotifier_;

	formatInfo_ = nullptr;

	V4L2Device::close();
}

/**
 * \fn V4L2VideoDevice::driverName()
 * \brief Retrieve the name of the V4L2 device driver
 * \return The string containing the driver name
 */

/**
 * \fn V4L2VideoDevice::deviceName()
 * \brief Retrieve the name of the V4L2 video device
 * \return The string containing the device name
 */

/**
 * \fn V4L2VideoDevice::busName()
 * \brief Retrieve the location of the device in the system
 * \return The string containing the device location
 */

/**
 * \fn V4L2VideoDevice::caps()
 * \brief Retrieve the device V4L2 capabilities
 * \return The device V4L2 capabilities
 */

std::string V4L2VideoDevice::logPrefix() const
{
	return deviceNode() + "[" + std::to_string(fd()) +
		(V4L2_TYPE_IS_OUTPUT(bufferType_) ? ":out]" : ":cap]");
}

/**
 * \brief Retrieve the image format set on the V4L2 video device
 * \param[out] format The image format applied on the video device
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::getFormat(V4L2DeviceFormat *format)
{
	if (caps_.isMeta())
		return getFormatMeta(format);
	else if (caps_.isMultiplanar())
		return getFormatMultiplane(format);
	else
		return getFormatSingleplane(format);
}

/**
 * \brief Try an image format on the V4L2 video device
 * \param[inout] format The image format to test applicability to the video device
 *
 * Try the supplied \a format on the video device without applying it, returning
 * the format that would be applied. This is equivalent to setFormat(), except
 * that the device configuration is not changed.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::tryFormat(V4L2DeviceFormat *format)
{
	if (caps_.isMeta())
		return trySetFormatMeta(format, false);
	else if (caps_.isMultiplanar())
		return trySetFormatMultiplane(format, false);
	else
		return trySetFormatSingleplane(format, false);
}

/**
 * \brief Configure an image format on the V4L2 video device
 * \param[inout] format The image format to apply to the video device
 *
 * Apply the supplied \a format to the video device, and return the actually
 * applied format parameters, as \ref V4L2VideoDevice::getFormat would do.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::setFormat(V4L2DeviceFormat *format)
{
	int ret = 0;
	if (caps_.isMeta())
		ret = trySetFormatMeta(format, true);
	else if (caps_.isMultiplanar())
		ret = trySetFormatMultiplane(format, true);
	else
		ret = trySetFormatSingleplane(format, true);

	/* Cache the set format on success. */
	if (ret)
		return ret;

	format_ = *format;
	formatInfo_ = &PixelFormatInfo::info(format_.fourcc);

	return 0;
}

int V4L2VideoDevice::getFormatMeta(V4L2DeviceFormat *format)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_meta_format *pix = &v4l2Format.fmt.meta;
	int ret;

	v4l2Format.type = bufferType_;
	ret = ioctl(VIDIOC_G_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error) << "Unable to get format: " << strerror(-ret);
		return ret;
	}

	format->size.width = 0;
	format->size.height = 0;
	format->fourcc = V4L2PixelFormat(pix->dataformat);
	format->planesCount = 1;
	format->planes[0].bpl = pix->buffersize;
	format->planes[0].size = pix->buffersize;

	return 0;
}

int V4L2VideoDevice::trySetFormatMeta(V4L2DeviceFormat *format, bool set)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_meta_format *pix = &v4l2Format.fmt.meta;
	int ret;

	v4l2Format.type = bufferType_;
	pix->dataformat = format->fourcc;
	pix->buffersize = format->planes[0].size;
	ret = ioctl(set ? VIDIOC_S_FMT : VIDIOC_TRY_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error)
			<< "Unable to " << (set ? "set" : "try")
			<< " format: " << strerror(-ret);
		return ret;
	}

	/*
	 * Return to caller the format actually applied on the video device,
	 * which might differ from the requested one.
	 */
	format->size.width = 0;
	format->size.height = 0;
	format->fourcc = V4L2PixelFormat(pix->dataformat);
	format->planesCount = 1;
	format->planes[0].bpl = pix->buffersize;
	format->planes[0].size = pix->buffersize;

	return 0;
}

int V4L2VideoDevice::getFormatMultiplane(V4L2DeviceFormat *format)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_pix_format_mplane *pix = &v4l2Format.fmt.pix_mp;
	int ret;

	v4l2Format.type = bufferType_;
	ret = ioctl(VIDIOC_G_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error) << "Unable to get format: " << strerror(-ret);
		return ret;
	}

	format->size.width = pix->width;
	format->size.height = pix->height;
	format->fourcc = V4L2PixelFormat(pix->pixelformat);
	format->planesCount = pix->num_planes;

	for (unsigned int i = 0; i < format->planesCount; ++i) {
		format->planes[i].bpl = pix->plane_fmt[i].bytesperline;
		format->planes[i].size = pix->plane_fmt[i].sizeimage;
	}

	return 0;
}

int V4L2VideoDevice::trySetFormatMultiplane(V4L2DeviceFormat *format, bool set)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_pix_format_mplane *pix = &v4l2Format.fmt.pix_mp;
	int ret;

	v4l2Format.type = bufferType_;
	pix->width = format->size.width;
	pix->height = format->size.height;
	pix->pixelformat = format->fourcc;
	pix->num_planes = format->planesCount;
	pix->field = V4L2_FIELD_NONE;

	ASSERT(pix->num_planes <= std::size(pix->plane_fmt));

	for (unsigned int i = 0; i < pix->num_planes; ++i) {
		pix->plane_fmt[i].bytesperline = format->planes[i].bpl;
		pix->plane_fmt[i].sizeimage = format->planes[i].size;
	}

	ret = ioctl(set ? VIDIOC_S_FMT : VIDIOC_TRY_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error)
			<< "Unable to " << (set ? "set" : "try")
			<< " format: " << strerror(-ret);
		return ret;
	}

	/*
	 * Return to caller the format actually applied on the video device,
	 * which might differ from the requested one.
	 */
	format->size.width = pix->width;
	format->size.height = pix->height;
	format->fourcc = V4L2PixelFormat(pix->pixelformat);
	format->planesCount = pix->num_planes;
	for (unsigned int i = 0; i < format->planesCount; ++i) {
		format->planes[i].bpl = pix->plane_fmt[i].bytesperline;
		format->planes[i].size = pix->plane_fmt[i].sizeimage;
	}

	return 0;
}

int V4L2VideoDevice::getFormatSingleplane(V4L2DeviceFormat *format)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_pix_format *pix = &v4l2Format.fmt.pix;
	int ret;

	v4l2Format.type = bufferType_;
	ret = ioctl(VIDIOC_G_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error) << "Unable to get format: " << strerror(-ret);
		return ret;
	}

	format->size.width = pix->width;
	format->size.height = pix->height;
	format->fourcc = V4L2PixelFormat(pix->pixelformat);
	format->planesCount = 1;
	format->planes[0].bpl = pix->bytesperline;
	format->planes[0].size = pix->sizeimage;

	return 0;
}

int V4L2VideoDevice::trySetFormatSingleplane(V4L2DeviceFormat *format, bool set)
{
	struct v4l2_format v4l2Format = {};
	struct v4l2_pix_format *pix = &v4l2Format.fmt.pix;
	int ret;

	v4l2Format.type = bufferType_;
	pix->width = format->size.width;
	pix->height = format->size.height;
	pix->pixelformat = format->fourcc;
	pix->bytesperline = format->planes[0].bpl;
	pix->field = V4L2_FIELD_NONE;
	ret = ioctl(set ? VIDIOC_S_FMT : VIDIOC_TRY_FMT, &v4l2Format);
	if (ret) {
		LOG(V4L2, Error)
			<< "Unable to " << (set ? "set" : "try")
			<< " format: " << strerror(-ret);
		return ret;
	}

	/*
	 * Return to caller the format actually applied on the device,
	 * which might differ from the requested one.
	 */
	format->size.width = pix->width;
	format->size.height = pix->height;
	format->fourcc = V4L2PixelFormat(pix->pixelformat);
	format->planesCount = 1;
	format->planes[0].bpl = pix->bytesperline;
	format->planes[0].size = pix->sizeimage;

	return 0;
}

/**
 * \brief Enumerate all pixel formats and frame sizes
 * \param[in] code Restrict formats to this media bus code.
 *
 * Enumerate all pixel formats and frame sizes supported by the video device.
 * If the \a code argument is not zero, only formats compatible with that media
 * bus code will be enumerated.
 *
 * \return A list of the supported video device formats
 */
V4L2VideoDevice::Formats V4L2VideoDevice::formats(uint32_t code)
{
	Formats formats;

	for (V4L2PixelFormat pixelFormat : enumPixelformats(code)) {
		std::vector<SizeRange> sizes = enumSizes(pixelFormat);
		if (sizes.empty())
			return {};

		if (formats.find(pixelFormat) != formats.end()) {
			LOG(V4L2, Error)
				<< "Could not add sizes for pixel format "
				<< pixelFormat;
			return {};
		}

		formats.emplace(pixelFormat, sizes);
	}

	return formats;
}

std::vector<V4L2PixelFormat> V4L2VideoDevice::enumPixelformats(uint32_t code)
{
	std::vector<V4L2PixelFormat> formats;
	int ret;

	if (code && !caps_.hasMediaController()) {
		LOG(V4L2, Error)
			<< "Media bus code filtering not supported by the device";
		return {};
	}

	for (unsigned int index = 0; ; index++) {
		struct v4l2_fmtdesc pixelformatEnum = {};
		pixelformatEnum.index = index;
		pixelformatEnum.type = bufferType_;
		pixelformatEnum.mbus_code = code;

		ret = ioctl(VIDIOC_ENUM_FMT, &pixelformatEnum);
		if (ret)
			break;

		formats.push_back(V4L2PixelFormat(pixelformatEnum.pixelformat));
	}

	if (ret && ret != -EINVAL) {
		LOG(V4L2, Error)
			<< "Unable to enumerate pixel formats: "
			<< strerror(-ret);
		return {};
	}

	return formats;
}

std::vector<SizeRange> V4L2VideoDevice::enumSizes(V4L2PixelFormat pixelFormat)
{
	std::vector<SizeRange> sizes;
	int ret;

	for (unsigned int index = 0;; index++) {
		struct v4l2_frmsizeenum frameSize = {};
		frameSize.index = index;
		frameSize.pixel_format = pixelFormat;

		ret = ioctl(VIDIOC_ENUM_FRAMESIZES, &frameSize);
		if (ret)
			break;

		if (index != 0 &&
		    frameSize.type != V4L2_FRMSIZE_TYPE_DISCRETE) {
			LOG(V4L2, Error)
				<< "Non-zero index for non discrete type";
			return {};
		}

		switch (frameSize.type) {
		case V4L2_FRMSIZE_TYPE_DISCRETE:
			sizes.emplace_back(Size{ frameSize.discrete.width,
						 frameSize.discrete.height });
			break;
		case V4L2_FRMSIZE_TYPE_CONTINUOUS:
			sizes.emplace_back(Size{ frameSize.stepwise.min_width,
						 frameSize.stepwise.min_height },
					   Size{ frameSize.stepwise.max_width,
						 frameSize.stepwise.max_height });
			break;
		case V4L2_FRMSIZE_TYPE_STEPWISE:
			sizes.emplace_back(Size{ frameSize.stepwise.min_width,
						 frameSize.stepwise.min_height },
					   Size{ frameSize.stepwise.max_width,
						 frameSize.stepwise.max_height },
					   frameSize.stepwise.step_width,
					   frameSize.stepwise.step_height);
			break;
		default:
			LOG(V4L2, Error)
				<< "Unknown VIDIOC_ENUM_FRAMESIZES type "
				<< frameSize.type;
			return {};
		}
	}

	if (ret && ret != -EINVAL) {
		LOG(V4L2, Error)
			<< "Unable to enumerate frame sizes: "
			<< strerror(-ret);
		return {};
	}

	return sizes;
}

/**
 * \brief Set a selection rectangle \a rect for \a target
 * \param[in] target The selection target defined by the V4L2_SEL_TGT_* flags
 * \param[inout] rect The selection rectangle to be applied
 *
 * \todo Define a V4L2SelectionTarget enum for the selection target
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::setSelection(unsigned int target, Rectangle *rect)
{
	struct v4l2_selection sel = {};

	sel.type = bufferType_;
	sel.target = target;
	sel.flags = 0;

	sel.r.left = rect->x;
	sel.r.top = rect->y;
	sel.r.width = rect->width;
	sel.r.height = rect->height;

	int ret = ioctl(VIDIOC_S_SELECTION, &sel);
	if (ret < 0) {
		LOG(V4L2, Error) << "Unable to set rectangle " << target
				 << ": " << strerror(-ret);
		return ret;
	}

	rect->x = sel.r.left;
	rect->y = sel.r.top;
	rect->width = sel.r.width;
	rect->height = sel.r.height;

	return 0;
}

int V4L2VideoDevice::requestBuffers(unsigned int count,
				    enum v4l2_memory memoryType)
{
	struct v4l2_requestbuffers rb = {};
	int ret;

	rb.count = count;
	rb.type = bufferType_;
	rb.memory = memoryType;

	ret = ioctl(VIDIOC_REQBUFS, &rb);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Unable to request " << count << " buffers: "
			<< strerror(-ret);
		return ret;
	}

	if (rb.count < count) {
		LOG(V4L2, Error)
			<< "Not enough buffers provided by V4L2VideoDevice";
		requestBuffers(0, memoryType);
		return -ENOMEM;
	}

	LOG(V4L2, Debug) << rb.count << " buffers requested.";

	return 0;
}

/**
 * \brief Allocate and export buffers from the video device
 * \param[in] count Number of buffers to allocate
 * \param[out] buffers Vector to store allocated buffers
 *
 * This function wraps buffer allocation with the V4L2 MMAP memory type. It
 * requests \a count buffers from the driver, allocating the corresponding
 * memory, and exports them as a set of FrameBuffer objects in \a buffers. Upon
 * successful return the driver's internal buffer management is initialized in
 * MMAP mode, and the video device is ready to accept queueBuffer() calls.
 *
 * The number of planes and their offsets and sizes are determined by the
 * currently active format on the device as set by setFormat(). They do not map
 * to the V4L2 buffer planes, but to colour planes of the pixel format. For
 * instance, if the active format is formats::NV12, the allocated FrameBuffer
 * instances will have two planes, for the luma and chroma components,
 * regardless of whether the device uses V4L2_PIX_FMT_NV12 or
 * V4L2_PIX_FMT_NV12M.
 *
 * Buffers allocated with this function shall later be free with
 * releaseBuffers(). If buffers have already been allocated with
 * allocateBuffers() or imported with importBuffers(), this function returns
 * -EBUSY.
 *
 * \return The number of allocated buffers on success or a negative error code
 * otherwise
 * \retval -EBUSY buffers have already been allocated or imported
 */
int V4L2VideoDevice::allocateBuffers(unsigned int count,
				     std::vector<std::unique_ptr<FrameBuffer>> *buffers)
{
	int ret = createBuffers(count, buffers);
	if (ret < 0)
		return ret;

	cache_ = new V4L2BufferCache(*buffers);
	memoryType_ = V4L2_MEMORY_MMAP;

	return ret;
}

/**
 * \brief Export buffers from the video device
 * \param[in] count Number of buffers to allocate
 * \param[out] buffers Vector to store allocated buffers
 *
 * This function allocates \a count buffer from the video device and exports
 * them as dmabuf objects, stored in \a buffers. Unlike allocateBuffers(), this
 * function leaves the driver's internal buffer management uninitialized. The
 * video device shall be initialized with importBuffers() or allocateBuffers()
 * before it can accept queueBuffer() calls. The exported buffers are directly
 * usable with any V4L2 video device in DMABUF mode, or with other dmabuf
 * importers.
 *
 * The number of planes and their offsets and sizes are determined by the
 * currently active format on the device as set by setFormat(). They do not map
 * to the V4L2 buffer planes, but to colour planes of the pixel format. For
 * instance, if the active format is formats::NV12, the allocated FrameBuffer
 * instances will have two planes, for the luma and chroma components,
 * regardless of whether the device uses V4L2_PIX_FMT_NV12 or
 * V4L2_PIX_FMT_NV12M.
 *
 * Multiple independent sets of buffers can be allocated with multiple calls to
 * this function. Device-specific limitations may apply regarding the minimum
 * and maximum number of buffers per set, or to total amount of allocated
 * memory. The exported dmabuf lifetime is tied to the returned \a buffers. To
 * free a buffer, the caller shall delete the corresponding FrameBuffer
 * instance. No bookkeeping and automatic free is performed by the
 * V4L2VideoDevice class.
 *
 * If buffers have already been allocated with allocateBuffers() or imported
 * with importBuffers(), this function returns -EBUSY.
 *
 * \return The number of allocated buffers on success or a negative error code
 * otherwise
 * \retval -EBUSY buffers have already been allocated or imported
 */
int V4L2VideoDevice::exportBuffers(unsigned int count,
				   std::vector<std::unique_ptr<FrameBuffer>> *buffers)
{
	int ret = createBuffers(count, buffers);
	if (ret < 0)
		return ret;

	requestBuffers(0, V4L2_MEMORY_MMAP);

	return ret;
}

int V4L2VideoDevice::createBuffers(unsigned int count,
				   std::vector<std::unique_ptr<FrameBuffer>> *buffers)
{
	if (cache_) {
		LOG(V4L2, Error) << "Buffers already allocated";
		return -EINVAL;
	}

	int ret = requestBuffers(count, V4L2_MEMORY_MMAP);
	if (ret < 0)
		return ret;

	for (unsigned i = 0; i < count; ++i) {
		std::unique_ptr<FrameBuffer> buffer = createBuffer(i);
		if (!buffer) {
			LOG(V4L2, Error) << "Unable to create buffer";

			requestBuffers(0, V4L2_MEMORY_MMAP);
			buffers->clear();

			return -EINVAL;
		}

		buffers->push_back(std::move(buffer));
	}

	return count;
}

std::unique_ptr<FrameBuffer> V4L2VideoDevice::createBuffer(unsigned int index)
{
	struct v4l2_plane v4l2Planes[VIDEO_MAX_PLANES] = {};
	struct v4l2_buffer buf = {};

	buf.index = index;
	buf.type = bufferType_;
	buf.length = std::size(v4l2Planes);
	buf.m.planes = v4l2Planes;

	int ret = ioctl(VIDIOC_QUERYBUF, &buf);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Unable to query buffer " << index << ": "
			<< strerror(-ret);
		return nullptr;
	}

	const bool multiPlanar = V4L2_TYPE_IS_MULTIPLANAR(buf.type);
	const unsigned int numPlanes = multiPlanar ? buf.length : 1;

	if (numPlanes == 0 || numPlanes > VIDEO_MAX_PLANES) {
		LOG(V4L2, Error) << "Invalid number of planes";
		return nullptr;
	}

	std::vector<FrameBuffer::Plane> planes;
	for (unsigned int nplane = 0; nplane < numPlanes; nplane++) {
		FileDescriptor fd = exportDmabufFd(buf.index, nplane);
		if (!fd.isValid())
			return nullptr;

		FrameBuffer::Plane plane;
		plane.fd = std::move(fd);
		/*
		 * V4L2 API doesn't provide dmabuf offset information of plane.
		 * Set 0 as a placeholder offset.
		 * \todo Set the right offset once V4L2 API provides a way.
		 */
		plane.offset = 0;
		plane.length = multiPlanar ? buf.m.planes[nplane].length : buf.length;

		planes.push_back(std::move(plane));
	}

	/*
	 * If we have a multi-planar format with a V4L2 single-planar buffer,
	 * split the single V4L2 plane into multiple FrameBuffer planes by
	 * computing the offsets manually.
	 *
	 * The format info is not guaranteed to be valid, as there are no
	 * PixelFormatInfo for metadata formats, so check it first.
	 */
	if (formatInfo_->isValid() && formatInfo_->numPlanes() != numPlanes) {
		/*
		 * There's no valid situation where the number of colour planes
		 * differs from the number of V4L2 planes and the V4L2 buffer
		 * has more than one plane.
		 */
		ASSERT(numPlanes == 1u);

		planes.resize(formatInfo_->numPlanes());
		const FileDescriptor &fd = planes[0].fd;
		size_t offset = 0;

		for (auto [i, plane] : utils::enumerate(planes)) {
			/*
			 * The stride is reported by V4L2 for the first plane
			 * only. Compute the stride of the other planes by
			 * taking the horizontal subsampling factor into
			 * account, which is equal to the bytesPerGroup ratio of
			 * the planes.
			 */
			unsigned int stride = format_.planes[0].bpl
					    * formatInfo_->planes[i].bytesPerGroup
					    / formatInfo_->planes[0].bytesPerGroup;

			plane.fd = fd;
			plane.offset = offset;
			plane.length = formatInfo_->planeSize(format_.size.height,
							      i, stride);
			offset += plane.length;
		}
	}

	return std::make_unique<FrameBuffer>(planes);
}

FileDescriptor V4L2VideoDevice::exportDmabufFd(unsigned int index,
					       unsigned int plane)
{
	struct v4l2_exportbuffer expbuf = {};
	int ret;

	expbuf.type = bufferType_;
	expbuf.index = index;
	expbuf.plane = plane;
	expbuf.flags = O_RDWR;

	ret = ioctl(VIDIOC_EXPBUF, &expbuf);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to export buffer: " << strerror(-ret);
		return FileDescriptor();
	}

	return FileDescriptor(std::move(expbuf.fd));
}

/**
 * \brief Prepare the device to import \a count buffers
 * \param[in] count Number of buffers to prepare to import
 *
 * This function initializes the driver's buffer management to import buffers
 * in DMABUF mode. It requests buffers from the driver, but doesn't allocate
 * memory.
 *
 * Upon successful return, the video device is ready to accept queueBuffer()
 * calls. The buffers to be imported are provided to queueBuffer(), and may be
 * supplied externally, or come from a previous exportBuffers() call.
 *
 * Device initialization performed by this function shall later be cleaned up
 * with releaseBuffers(). If buffers have already been allocated with
 * allocateBuffers() or imported with importBuffers(), this function returns
 * -EBUSY.
 *
 * \return 0 on success or a negative error code otherwise
 * \retval -EBUSY buffers have already been allocated or imported
 */
int V4L2VideoDevice::importBuffers(unsigned int count)
{
	if (cache_) {
		LOG(V4L2, Error) << "Buffers already allocated";
		return -EINVAL;
	}

	memoryType_ = V4L2_MEMORY_DMABUF;

	int ret = requestBuffers(count, V4L2_MEMORY_DMABUF);
	if (ret)
		return ret;

	cache_ = new V4L2BufferCache(count);

	LOG(V4L2, Debug) << "Prepared to import " << count << " buffers";

	return 0;
}

/**
 * \brief Release resources allocated by allocateBuffers() or importBuffers()
 *
 * This function resets the driver's internal buffer management that was
 * initialized by a previous call to allocateBuffers() or importBuffers(). Any
 * memory allocated by allocateBuffers() is freed. Buffer exported by
 * exportBuffers(), if any, are not affected.
 */
int V4L2VideoDevice::releaseBuffers()
{
	LOG(V4L2, Debug) << "Releasing buffers";

	delete cache_;
	cache_ = nullptr;

	return requestBuffers(0, memoryType_);
}

/**
 * \brief Queue a buffer to the video device
 * \param[in] buffer The buffer to be queued
 *
 * For capture video devices the \a buffer will be filled with data by the
 * device. For output video devices the \a buffer shall contain valid data and
 * will be processed by the device. Once the device has finished processing the
 * buffer, it will be available for dequeue.
 *
 * The best available V4L2 buffer is picked for \a buffer using the V4L2 buffer
 * cache.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::queueBuffer(FrameBuffer *buffer)
{
	struct v4l2_plane v4l2Planes[VIDEO_MAX_PLANES] = {};
	struct v4l2_buffer buf = {};
	int ret;

	/*
	 * Pipeline handlers should not requeue buffers after releasing the
	 * buffers on the device. Any occurence of this error should be fixed
	 * in the pipeline handler directly.
	 */
	if (!cache_) {
		LOG(V4L2, Fatal) << "No BufferCache available to queue.";
		return -ENOENT;
	}

	ret = cache_->get(*buffer);
	if (ret < 0)
		return ret;

	buf.index = ret;
	buf.type = bufferType_;
	buf.memory = memoryType_;
	buf.field = V4L2_FIELD_NONE;

	bool multiPlanar = V4L2_TYPE_IS_MULTIPLANAR(buf.type);
	const std::vector<FrameBuffer::Plane> &planes = buffer->planes();
	const unsigned int numV4l2Planes = format_.planesCount;

	/*
	 * Ensure that the frame buffer has enough planes, and that they're
	 * contiguous if the V4L2 format requires them to be.
	 */
	if (planes.size() < numV4l2Planes) {
		LOG(V4L2, Error) << "Frame buffer has too few planes";
		return -EINVAL;
	}

	if (planes.size() != numV4l2Planes && !buffer->_d()->isContiguous()) {
		LOG(V4L2, Error) << "Device format requires contiguous buffer";
		return -EINVAL;
	}

	if (buf.memory == V4L2_MEMORY_DMABUF) {
		if (multiPlanar) {
			for (unsigned int p = 0; p < numV4l2Planes; ++p)
				v4l2Planes[p].m.fd = planes[p].fd.fd();
		} else {
			buf.m.fd = planes[0].fd.fd();
		}
	}

	if (multiPlanar) {
		buf.length = numV4l2Planes;
		buf.m.planes = v4l2Planes;
	}

	if (V4L2_TYPE_IS_OUTPUT(buf.type)) {
		const FrameMetadata &metadata = buffer->metadata();

		if (numV4l2Planes != planes.size()) {
			/*
			 * If we have a multi-planar buffer with a V4L2
			 * single-planar format, coalesce all planes. The length
			 * and number of bytes used may only differ in the last
			 * plane as any other situation can't be represented.
			 */
			unsigned int bytesused = 0;
			unsigned int length = 0;

			for (auto [i, plane] : utils::enumerate(planes)) {
				bytesused += metadata.planes()[i].bytesused;
				length += plane.length;

				if (i != planes.size() - 1 && bytesused != length) {
					LOG(V4L2, Error)
						<< "Holes in multi-planar buffer not supported";
					return -EINVAL;
				}
			}

			if (multiPlanar) {
				v4l2Planes[0].bytesused = bytesused;
				v4l2Planes[0].length = length;
			} else {
				buf.bytesused = bytesused;
				buf.length = length;
			}
		} else if (multiPlanar) {
			/*
			 * If we use the multi-planar API, fill in the planes.
			 * The number of planes in the frame buffer and in the
			 * V4L2 buffer is guaranteed to be equal at this point.
			 */
			for (auto [i, plane] : utils::enumerate(planes)) {
				v4l2Planes[i].bytesused = metadata.planes()[i].bytesused;
				v4l2Planes[i].length = plane.length;
			}
		} else {
			/*
			 * Single-planar API with a single plane in the buffer
			 * is trivial to handle.
			 */
			buf.bytesused = metadata.planes()[0].bytesused;
			buf.length = planes[0].length;
		}

		buf.sequence = metadata.sequence;
		buf.timestamp.tv_sec = metadata.timestamp / 1000000000;
		buf.timestamp.tv_usec = (metadata.timestamp / 1000) % 1000000;
	}

	LOG(V4L2, Debug) << "Queueing buffer " << buf.index;

	ret = ioctl(VIDIOC_QBUF, &buf);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to queue buffer " << buf.index << ": "
			<< strerror(-ret);
		return ret;
	}

	if (queuedBuffers_.empty())
		fdBufferNotifier_->setEnabled(true);

	queuedBuffers_[buf.index] = buffer;

	return 0;
}

/**
 * \brief Slot to handle completed buffer events from the V4L2 video device
 *
 * When this slot is called, a Buffer has become available from the device, and
 * will be emitted through the bufferReady Signal.
 *
 * For Capture video devices the FrameBuffer will contain valid data.
 * For Output video devices the FrameBuffer can be considered empty.
 */
void V4L2VideoDevice::bufferAvailable()
{
	FrameBuffer *buffer = dequeueBuffer();
	if (!buffer)
		return;

	/* Notify anyone listening to the device. */
	bufferReady.emit(buffer);
}

/**
 * \brief Dequeue the next available buffer from the video device
 *
 * This function dequeues the next available buffer from the device. If no
 * buffer is available to be dequeued it will return nullptr immediately.
 *
 * \return A pointer to the dequeued buffer on success, or nullptr otherwise
 */
FrameBuffer *V4L2VideoDevice::dequeueBuffer()
{
	struct v4l2_buffer buf = {};
	struct v4l2_plane planes[VIDEO_MAX_PLANES] = {};
	int ret;

	buf.type = bufferType_;
	buf.memory = memoryType_;

	bool multiPlanar = V4L2_TYPE_IS_MULTIPLANAR(buf.type);

	if (multiPlanar) {
		buf.length = VIDEO_MAX_PLANES;
		buf.m.planes = planes;
	}

	ret = ioctl(VIDIOC_DQBUF, &buf);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to dequeue buffer: " << strerror(-ret);
		return nullptr;
	}

	LOG(V4L2, Debug) << "Dequeuing buffer " << buf.index;

	/*
	 * If the video node fails to stream-on successfully (which can occur
	 * when queuing a buffer), a vb2 kernel bug can lead to the buffer which
	 * returns a failure upon queuing being mistakenly kept in the kernel.
	 * This leads to the kernel notifying us that a buffer is available to
	 * dequeue, which we have no awareness of being queued, and thus we will
	 * not find it in the queuedBuffers_ list.
	 *
	 * Whilst this kernel bug has been fixed in mainline, ensure that we
	 * safely ingore buffers which are unexpected to prevetn crashes on
	 * older kernels.
	 */
	auto it = queuedBuffers_.find(buf.index);
	if (it == queuedBuffers_.end()) {
		LOG(V4L2, Error)
			<< "Dequeued unexpected buffer index " << buf.index;

		return nullptr;
	}

	cache_->put(buf.index);

	FrameBuffer *buffer = it->second;
	queuedBuffers_.erase(it);

	if (queuedBuffers_.empty())
		fdBufferNotifier_->setEnabled(false);

	buffer->metadata_.status = buf.flags & V4L2_BUF_FLAG_ERROR
				 ? FrameMetadata::FrameError
				 : FrameMetadata::FrameSuccess;
	buffer->metadata_.sequence = buf.sequence;
	buffer->metadata_.timestamp = buf.timestamp.tv_sec * 1000000000ULL
				    + buf.timestamp.tv_usec * 1000ULL;

	if (V4L2_TYPE_IS_OUTPUT(buf.type))
		return buffer;

	unsigned int numV4l2Planes = multiPlanar ? buf.length : 1;
	FrameMetadata &metadata = buffer->metadata_;

	if (numV4l2Planes != buffer->planes().size()) {
		/*
		 * If we have a multi-planar buffer with a V4L2
		 * single-planar format, split the V4L2 buffer across
		 * the buffer planes. Only the last plane may have less
		 * bytes used than its length.
		 */
		if (numV4l2Planes != 1) {
			LOG(V4L2, Error)
				<< "Invalid number of planes (" << numV4l2Planes
				<< " != " << buffer->planes().size() << ")";

			metadata.status = FrameMetadata::FrameError;
			return buffer;
		}

		/*
		 * With a V4L2 single-planar format, all the data is stored in
		 * a single memory plane. The number of bytes used is conveyed
		 * through that plane when using the V4L2 multi-planar API, or
		 * set directly in the buffer when using the V4L2 single-planar
		 * API.
		 */
		unsigned int bytesused = multiPlanar ? planes[0].bytesused
				       : buf.bytesused;
		unsigned int remaining = bytesused;

		for (auto [i, plane] : utils::enumerate(buffer->planes())) {
			if (!remaining) {
				LOG(V4L2, Error)
					<< "Dequeued buffer (" << bytesused
					<< " bytes) too small for plane lengths "
					<< utils::join(buffer->planes(), "/",
						       [](const FrameBuffer::Plane &p) {
							       return p.length;
						       });

				metadata.status = FrameMetadata::FrameError;
				return buffer;
			}

			metadata.planes()[i].bytesused =
				std::min(plane.length, remaining);
			remaining -= metadata.planes()[i].bytesused;
		}
	} else if (multiPlanar) {
		/*
		 * If we use the multi-planar API, fill in the planes.
		 * The number of planes in the frame buffer and in the
		 * V4L2 buffer is guaranteed to be equal at this point.
		 */
		for (unsigned int i = 0; i < numV4l2Planes; ++i)
			metadata.planes()[i].bytesused = planes[i].bytesused;
	} else {
		metadata.planes()[0].bytesused = buf.bytesused;
	}

	return buffer;
}

/**
 * \var V4L2VideoDevice::bufferReady
 * \brief A Signal emitted when a framebuffer completes
 */

/**
 * \brief Start the video stream
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::streamOn()
{
	int ret;

	ret = ioctl(VIDIOC_STREAMON, &bufferType_);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to start streaming: " << strerror(-ret);
		return ret;
	}

	streaming_ = true;

	return 0;
}

/**
 * \brief Stop the video stream
 *
 * Buffers that are still queued when the video stream is stopped are
 * immediately dequeued with their status set to FrameMetadata::FrameCancelled,
 * and the bufferReady signal is emitted for them. The order in which those
 * buffers are dequeued is not specified.
 *
 * This will be a no-op if the stream is not started in the first place and
 * has no queued buffers.
 *
 * \return 0 on success or a negative error code otherwise
 */
int V4L2VideoDevice::streamOff()
{
	int ret;

	if (!streaming_ && queuedBuffers_.empty())
		return 0;

	ret = ioctl(VIDIOC_STREAMOFF, &bufferType_);
	if (ret < 0) {
		LOG(V4L2, Error)
			<< "Failed to stop streaming: " << strerror(-ret);
		return ret;
	}

	/* Send back all queued buffers. */
	for (auto it : queuedBuffers_) {
		FrameBuffer *buffer = it.second;

		buffer->metadata_.status = FrameMetadata::FrameCancelled;
		bufferReady.emit(buffer);
	}

	queuedBuffers_.clear();
	fdBufferNotifier_->setEnabled(false);
	streaming_ = false;

	return 0;
}

/**
 * \brief Create a new video device instance from \a entity in media device
 * \a media
 * \param[in] media The media device where the entity is registered
 * \param[in] entity The media entity name
 *
 * \return A newly created V4L2VideoDevice on success, nullptr otherwise
 */
std::unique_ptr<V4L2VideoDevice>