# SPDX-License-Identifier: LGPL-2.1-or-later # # Copyright (C) 2019, Google Inc. # %YAML 1.2 --- # Unless otherwise stated, all controls are bi-directional, i.e. they can be # set through Request::controls() and returned out through Request::metadata(). controls: - AeEnable: type: bool description: | Enable or disable the AE. \sa ExposureTime AnalogueGain - AeLocked: type: bool description: | Report the lock status of a running AE algorithm. If the AE algorithm is locked the value shall be set to true, if it's converging it shall be set to false. If the AE algorithm is not running the control shall not be present in the metadata control list. \sa AeEnable # AeMeteringMode needs further attention: # - Auto-generate max enum value. # - Better handling of custom types. - AeMeteringMode: type: int32_t description: | Specify a metering mode for the AE algorithm to use. The metering modes determine which parts of the image are used to determine the scene brightness. Metering modes may be platform specific and not all metering modes may be supported. enum: - name: MeteringCentreWeighted value: 0 description: Centre-weighted metering mode. - name: MeteringSpot value: 1 description: Spot metering mode. - name: MeteringMatrix value: 2 description: Matrix metering mode. - name: MeteringCustom value: 3 description: Custom metering mode. # AeConstraintMode needs further attention: # - Auto-generate max enum value. # - Better handling of custom types. - AeConstraintMode: type: int32_t description: | Specify a constraint mode for the AE algorithm to use. These determine how the measured scene brightness is adjusted to reach the desired target exposure. Constraint modes may be platform specific, and not all constraint modes may be supported. enum: - name: ConstraintNormal value: 0 description: Default constraint mode. This mode aims to balance the exposure of different parts of the image so as to reach a reasonable average level. However, highlights in the image may appear over-exposed and lowlights may appear under-exposed. - name: ConstraintHighlight value: 1 description: Highlight constraint mode. This mode adjusts the exposure levels in order to try and avoid over-exposing the brightest parts (highlights) of an image. Other non-highlight parts of the image may appear under-exposed. - name: ConstraintShadows value: 2 description: Shadows constraint mode. This mode adjusts the exposure levels in order to try and avoid under-exposing the dark parts (shadows) of an image. Other normally exposed parts of the image may appear over-exposed. - name: ConstraintCustom value: 3 description: Custom constraint mode. # AeExposureMode needs further attention: # - Auto-generate max enum value. # - Better handling of custom types. - AeExposureMode: type: int32_t description: | Specify an exposure mode for the AE algorithm to use. These specify how the desired total exposure is divided between the shutter time and the sensor's analogue gain. The exposure modes are platform specific, and not all exposure modes may be supported. enum: - name: ExposureNormal value: 0 description: Default exposure mode. - name: ExposureShort value: 1 description: Exposure mode allowing only short exposure times. - name: ExposureLong value: 2 description: Exposure mode allowing long exposure times. - name: ExposureCustom value: 3 description: Custom exposure mode. - ExposureValue: type: float description: | Specify an Exposure Value (EV) parameter. The EV parameter will only be applied if the AE algorithm is currently enabled. By convention EV adjusts the exposure as log2. For example EV = [-2, -1, 0.5, 0, 0.5, 1, 2] results in an exposure adjustment of [1/4x, 1/2x, 1/sqrt(2)x, 1x, sqrt(2)x, 2x, 4x]. \sa AeEnable - ExposureTime: type: int32_t description: | Exposure time (shutter speed) for the frame applied in the sensor device. This value is specified in micro-seconds. \sa AnalogueGain AeEnable - AnalogueGain: type: float description: | Analogue gain value applied in the sensor device. The value of the control specifies the gain multiplier applied to all colour channels. This value cannot be lower than 1.0. \sa ExposureTime AeEnable - Brightness: type: float description: | Specify a fixed brightness parameter. Positive values (up to 1.0) produce brighter images; negative values (up to -1.0) produce darker images and 0.0 leaves pixels unchanged. - Contrast: type: float description: | Specify a fixed contrast parameter. Normal contrast is given by the value 1.0; larger values produce images with more contrast. - Lux: type: float description: | Report an estimate of the current illuminance level in lux. The Lux control can only be returned in metadata. - AwbEnable: type: bool description: | Enable or disable the AWB. \sa ColourGains # AwbMode needs further attention: # - Auto-generate max enum value. # - Better handling of custom types. - AwbMode: type: int32_t description: | Specify the range of illuminants to use for the AWB algorithm. The modes supported are platform specific, and not all modes may be supported. enum: - name: AwbAuto value: 0 description: Search over the whole colour temperature range. - name: AwbIncandescent value: 1 description: Incandescent AWB lamp mode. - name: AwbTungsten value: 2 description: Tungsten AWB lamp mode. - name: AwbFluorescent value: 3 description: Fluorescent AWB lamp mode. - name: AwbIndoor value: 4 description: Indoor AWB lighting mode. - name: AwbDaylight value: 5 description: Daylight AWB lighting mode. - name: AwbCloudy value: 6 description: Cloudy AWB lighting mode. - name: AwbCustom value: 7 description: Custom AWB mode. - AwbLocked: type: bool description: | Report the lock status of a running AWB algorithm. If the AWB algorithm is locked the value shall be set to true, if it's converging it shall be set to false. If the AWB algorithm is not running the control shall not be present in the metadata control list. \sa AwbEnable - ColourGains: type: float description: | Pair of gain values for the Red and Blue colour channels, in that order. ColourGains can only be applied in a Request when the AWB is disabled. \sa AwbEnable size: [2] - ColourTemperature: type: int32_t description: Report the current estimate of the colour temperature, in kelvin, for this frame. The ColourTemperature control can only be returned in metadata. - Saturation: type: float description: | Specify a fixed saturation parameter. Normal saturation is given by the value 1.0; larger values produce more saturated colours; 0.0 produces a greyscale image. - SensorBlackLevels: type: int32_t description: | Reports the sensor black levels used for processing a frame, in the order R, Gr, Gb, B. These values are returned as numbers out of a 16-bit pixel range (as if pixels ranged from 0 to 65535). The SensorBlackLevels control can only be returned in metadata. size: [4] - Sharpness: type: float description: | A value of 0.0 means no sharpening. The minimum value means minimal sharpening, and shall be 0.0 unless the camera can't disable sharpening completely. The default value shall give a "reasonable" level of sharpening, suitable for most use cases. The maximum value may apply extremely high levels of sharpening, higher than anyone could reasonably want. Negative values are not allowed. Note also that sharpening is not applied to raw streams. - FocusFoM: type: int32_t description: | Reports a Figure of Merit (FoM) to indicate how in-focus the frame is. A larger FocusFoM value indicates a more in-focus frame. This control depends on the IPA to gather ISP statistics from the defined focus region, and combine them in a suitable way to generate a FocusFoM value. In this respect, it is not necessarily aimed at providing a way to implement a focus algorithm by the application, rather an indication of how in-focus a frame is. - ColourCorrectionMatrix: type: float description: | The 3x3 matrix that converts camera RGB to sRGB within the imaging pipeline. This should describe the matrix that is used after pixels have been white-balanced, but before any gamma transformation. The 3x3 matrix is stored in conventional reading order in an array of 9 floating point values. size: [3x3] - AePrecaptureTrigger: type: int32_t draft: true description: | Control for AE metering trigger. Currently identical to ANDROID_CONTROL_AE_PRECAPTURE_TRIGGER. Whether the camera device will trigger a precapture metering sequence when it processes this request. enum: - name: AePrecaptureTriggerIdle value: 0 description: The trigger is idle. - name: AePrecaptureTriggerStart value: 1 description: The pre-capture AE metering is started by the camera. - name: AePrecaptureTriggerCancel value: 2 description: | The camera will cancel any active or completed metering sequence. The AE algorithm is reset to its initial state. - AfTrigger: type: int32_t draft: true description: | Control for AF trigger. Currently identical to ANDROID_CONTROL_AF_TRIGGER. Whether the camera device will trigger autofocus for this request. enum: - name: AfTriggerIdle value: 0 description: The trigger is idle. - name: AfTriggerStart value: 1 description: The AF routine is started by the camera. - name: AfTriggerCancel value: 2 description: | The camera will cancel any active trigger and the AF routine is reset to its initial state. - NoiseReductionMode: type: int32_t draft: true description: | Control to select the noise reduction algorithm mode. Currently identical to ANDROID_NOISE_REDUCTION_MODE. Mode of operation for the noise reduction algorithm. enum: - name: NoiseReductionModeOff value: 0 description: No noise reduction is applied - name: NoiseReductionModeFast value: 1 description: | Noise reduction is applied without reducing the frame rate. - name: NoiseReductionModeHighQuality value: 2 description: | High quality noise reduction at the expense of frame rate. - name: NoiseReductionModeMinimal value: 3 description: | Minimal noise reduction is applied without reducing the frame rate. - name: NoiseReductionModeZSL value: 4 description: | Noise reduction is applied at different levels to different streams. - ColorCorrectionAberrationMode: type: int32_t draft: true description: | Control to select the color correction aberration mode. Currently identical to ANDROID_COLOR_CORRECTION_ABERRATION_MODE. Mode of operation for the chromatic aberration correction algorithm. enum: - name: ColorCorrectionAberrationOff value: 0 description: No aberration correction is applied. - name: ColorCorrectionAberrationFast value: 1 description: Aberration correction will not slow down the frame rate. - name: ColorCorrectionAberrationHighQuality value: 2 description: | High quality aberration correction which might reduce the frame rate. - AeState: type: int32_t draft: true description: | Control to report the current AE algorithm state. Currently identical to ANDROID_CONTROL_AE_STATE. Current state of the AE algorithm. enum: - name: AeStateInactive value: 0 description: The AE algorithm is inactive. - name: AeStateSearching value: 1 description: The AE algorithm has not converged yet. - name: AeStateConverged value: 2 description: The AE algorithm has converged. - name: AeStateLocked value: 3 description: The AE algorithm is locked. - name: AeStateFlashRequired value: 4 description: The AE algorithm would need a flash for good results - name: AeStatePrecapture value: 5 description: | The AE algorithm has started a pre-capture metering session. \sa AePrecaptureTrigger - AfState: type: int32_t draft: true description: | Control to report the current AF algorithm state. Currently identical to ANDROID_CONTROL_AF_STATE. Current state of the AF algorithm. enum: - name: AfStateInactive value: 0 description: The AF algorithm is inactive. - name: AfStatePassiveScan value: 1 description: | AF is performing a passive scan of the scene in continuous auto-focus mode. - name: AfStatePassiveFocused value: 2 description: | AF believes the scene is in focus, but might restart scanning. - name: AfStateActiveScan value: 3 description: | AF is performing a scan triggered by an AF trigger request. \sa AfTrigger - name: AfStateFocusedLock value: 4 description: | AF believes has focused correctly and has locked focus. - name: AfStateNotFocusedLock value: 5 description: | AF has not been able to focus and has locked. - name: AfStatePassiveUnfocused value: 6 description: | AF has completed a passive scan without finding focus. - AwbState: type: int32_t draft: true description: | Control to report the current AWB algorithm state. Currently identical to ANDROID_CONTROL_AWB_STATE. Current state of the AWB algorithm. enum: - name: AwbStateInactive value: 0 description: The AWB algorithm is inactive. - name: AwbStateSearching value: 1 description: The AWB algorithm has not converged yet. - name: AwbConverged value: 2 description: The AWB algorithm has converged. - name: AwbLocked value: 3 description: The AWB algorithm is locked. - SensorTimestamp: type: int64_t draft: true description: | Control to report the start of exposure of the first row of the captured image. Currently identical to ANDROID_SENSOR_TIMESTAMP. - SensorRollingShutterSkew: type: int64_t draft: true description: | Control to report the time between the start of exposure of the first row and the start of exposure of the last row. Currently identical to ANDROID_SENSOR_ROLLING_SHUTTER_SKEW - LensShadingMapMode: type: int32_t draft: true description: | Control to report if the lens shading map is available. Currently identical to ANDROID_STATISTICS_LENS_SHADING_MAP_MODE. enum: - name: LensShadingMapModeOff value: 0 description: No lens shading map mode is available. - name: LensShadingMapModeOn value: 1 description: The lens shading map mode is available. - SceneFlicker: type: int32_t draft: true description: | Control to report the detected scene light frequency. Currently identical to ANDROID_STATISTICS_SCENE_FLICKER. enum: - name: SceneFickerOff value: 0 description: No flickering detected. - name: SceneFicker50Hz value: 1 description: 50Hz flickering detected. - name: SceneFicker60Hz value: 2 description: 60Hz flickering detected. - PipelineDepth: type: int32_t draft: true description: | Specifies the number of pipeline stages the frame went through from when it was exposed to when the final completed result was available to the framework. Always less than or equal to PipelineMaxDepth. Currently identical to ANDROID_REQUEST_PIPELINE_DEPTH. The typical value for this control is 3 as a frame is first exposed, captured and then processed in a single pass through the ISP. Any additional processing step performed after the ISP pass (in example face detection, additional format conversions etc) count as an additional pipeline stage. ...