| Age | Commit message (Collapse) | Author |
|---|
|
Android ship a per-sensor configuration file in .xml format.
The .xml file contains a main <matfile> node and a <sensor> sub-node
which contains an <LSC> entry. The LSC tables there contained can be
re-used for libcamera, by parsing them opportunely.
Add a script to utils/rkisp1/ to extract the LSC tables from Android
configuration file for the RkISP1 platform, modeled after the
requirements of the Rockchip closed source IQ tuning module.
Compared to the Rockchip IQ LSC module the one implemented in libcamera
is slightly simpler, and the parsing of the LSC table takes that into
account by:
- Only outputting tables for the larger found sensor resolution
- Only outputting tables for "vignetting" value == 70 (ignoring the ones
for vignetting values of 100)
The script outputs to stdout a "LensShadingCorrection" section that
can be directly pasted in a libcamera sensor configuration file.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Add a commit checker to ensure that commit titles start with a prefix.
The commit issue message lists prefix candidates retrieved from the git
log.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
Declaration of new header file to the build system are only checked against
modified meson.build file. Therefore, this raises a false positive warning in
case the meson.build is added or renamed.
Add the new and renamed meson.build files to the list of files to check header
file inclusion.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a tuning script for rkisp1 that uses libtuning. So far it only
supports LSC.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a tuning script for raspberrypi for alsc only, that uses libtuning.
Since there will also be a tuning script for raspberrypi that has more
modules, put the libtuning alsc module definition in a separate file so
that it can be reused later.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a generator to libtuning for writing tuning output to a yaml file.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a parser to libtuning for parsing configuration files in yaml
format.
At the moment it doesn't parse anything and simply returns an empty
config. This is fine for the time being, as the only user of it is the
rkisp1 tuning script, which only has an LSC module which doesn't consume
anything from the configuration file. When a module comes around that
requires the yaml parser, it can be implemented then.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a generator to libtuning for writing tuning output to a json file
formatted the same way that raspberrypi's ctt formats them.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a parser to libtuning for parsing configuration files that are the
same format as raspberrypi's ctt's configuration files.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an LSC module for RkISP1.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an ALSC module for Raspberry Pi.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a base LSC module to libtuning's collection of modules. It is based
on raspberrypi's ctt's ALSC, but customizable for different lens shading
table sizes, among other things. It alone is insufficient as a module,
but it provides utilities that are useful for and which will simplify
implementing LSC modules.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement the extensible components of libtuning. This includes:
- Parsers, for supporting different types of input config file formats
- Generators, for supporting different types of output tuning file
formats
- Modules, for supporting different tuning modules for different
algorithms and platforms
No parsers, generators, or modules are actually implemented. Only the
base classes are implemented.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement math helpers for libtuning. This includes:
- Average, a wrapper class for numpy averaging functions
- Gradient, a class that represents gradients, for distributing and
mapping
- Smoothing, a wrapper class for cv2 smoothing functions
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement the core of libtuning, our new tuning tool infrastructure. It
leverages components from raspberrypi's ctt that could be reused for
tuning tools for other platforms.
The core components include:
- The Image class
- libtuning (entry point and other core functions)
- macbeth-related tools, including the macbeth reference image
- utils
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Building libcamera as a subproject is failing when tracepoints are
enabled due to incorrectly managing the relative paths between the
source and build directory while generating tracepoint headers.
The previously used
path = output.replace('include/', '', 1)
logic is not sufficient to correctly determine the proper path when
libcamera is built as a subproject, and does not correctly handle the
relative paths, causing path to be processed as:
'subprojects/libcamera/include/libcamera/internal/tracepoints.h'.replace('include/', '', 1)
which evaluates to
'subprojects/libcamera/libcamera/internal/tracepoints.h'
so the tracepoints.h header file will try to include:
#define TRACEPOINT_INCLUDE "subprojects/libcamera/libcamera/internal/tracepoints.h"
which will fail.
Fix it by using Python's pathlib to calculate the relative path of the
output file with respect to the "include" directory of libcamera.
This has been tested with Pipewire. For non-subproject builds it should
generate the exact same path that was previously generated.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Kieran: Commit message expanded/reworded]
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The alsc component of ctt meant to average the two green channels into
one, but used incorrect indexing resulting in only the first green
channel being used. Fix this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
|
|
Currently, enums that are passed between pipeline handlers and their IPA
must be defined in a mojom file. However, there is a use case for
enum/flags to be defined in a C++ header, such that the enum can be used
in a component other than the pipeline handler and its IPA.
To support this, add support for the skipHeader attribute for enums.
Like structs, it is only allowed in core.mojom.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Flags<E> as a supported type in the IPA interface.
It is used in mojom with the [flags] attribute. Any field or parameter
type E that is prefixed with the [flags] attribute will direct the code
generator to generate the type name "Flags<E>" and appropriate
serialization/deserialization code for Flags<E> instead of for E.
It is usable and has been tested in struct members, function input and
output parameters, and Signal parameters. This does not add support for
returning Flags as direct return values.
Additionally, the [scopedEnum] attribute can be used on enum
definitions, which will instruct the code generator to convert it to an
enum class instead of a raw enum.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
There is already support for enums as struct members, but there was no
support for enums in function parameters. Add it.
This does not add support for returning enums as direct return values.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Support making releases of libcamera by introducing a helper script
which will facilitate the increment of any release version, along with
generating an associated tag.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the semver utility (version 3.4.0) from [0] to make use of it
with our versioning and release scripts.
[0] https://raw.githubusercontent.com/fsaintjacques/semver-tool/3c76a6f9d113f4045f693845131185611a62162e/src/semver
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Array controls specify the array size through the YAML 'size' element,
which stores a list of values, one per dimension. Variable-size arrays
currently use an empty 'size' list, which prevents describing the number
of dimensions of the array.
Improve this by using the same notation for fixed-size and variable-size
array controls. Dimensions that are not fixed are described as a string
instead of an integer, such as [n], [n,3] or [w,h]. The strings have
currently no special meaning, this may change in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The gen-controls.py script handles the data structure produced by the
YAML parser manually through the whole code base. Clean this up by
encapsulating it in Control and ControlEnum classes to model a control
and its enum values respectively, to decouple YAML data handling from
generation.
No functional change intended.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Add a -i/--invert command line argument to invert the YCbCr encoding and
output a YCbCr to RGB matrix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The delayedctrls_parse.py script is missing license information. Add an
SPDX header to fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Rec01, Rec709, Rec2020 and SMTPE 240M standards specify the Cb and
Cr coefficients of the RGB to Y'CbCr conversion matrix using a quotient
of two values. Use the exact same formulas instead of hardcoding the
division results with a lower precision.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
This script generates fixed-point integer coefficients for the YCbCr
encoding 3x3 matrix. The encoding, quantization and fixed-point
precision can be selected through command line arguments.
The main purpose of the script is to generate coefficient tables to
extend the rkisp1 driver with support for additional YCbCr encodings,
but it may be useful for other purposes as well given that the rounding
isn't trivial.
The Rec. 601 full and limited range coefficients have been verified to
match the values currently used by the rkisp1 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Define Span types explicitly as either variable- or fixed-sized. This
introduces a new convention for defining Span dimensions in the property
and control value definitions and generates Span types as variable-sized
Span<T> or as fixed-sized Span<T,N>.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The DNG specification is based on the TIFF file format and recommends
storing the raw image data in a SubIFD and the Exif tags in an Exif IFD.
Other options are allowed, even if not recommended, such as storing both
the raw image data and the Exif data in IFD0, as done by the TIFF/EP
specification.
libcamera-apps use pyexiv2 to produce DNG files, following the DNG
recommendation, while applications based on picamera2 use PiDNG, which
adopts the TIFF/EP structure. Why it does so is not currently clear (see
https://github.com/schoolpost/PiDNG/issues/65 for discussions on this
topic), but as files based on the DNG and TIFF/EP variants exist in the
wild, both need to be supported by ctt.
Add code to identify which tags are being used, and then load the
metadata from the correct tags.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ctt would not work if only passed alsc images.
Add alsc_only.py to run alsc calibration only, and modify check_imgs
to allow for no macbeth chart images.
Example usage would be ./alsc_only.py -i tuning-images/ -o sensor.json
with the same optional arguments as the original ctt.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a script to convert the Raspberry Pi camera tuning file format from version
1.0 to 2.0. This script also adds a root level version key set to 2.0 to the
config file, allowing the controller to distinguish between the two formats.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Update the ctt_pretty_print_json.py script to generate the new version 2.0
format camera tuning file. This script can be called through the command line
to prettify an existing JSON file, or programatically by the CTT to format a
new JSON config dictionary.
Update the CTT to produce a version 2.0 format json structure and use
ctt_pretty_print_json.pretty_print to prettify the output.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
|
|
s/Raspberry Pi (Trading) Limited/Raspberry Pi Ltd/ to reflect the new
Raspberry Pi entity name.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Provide a 10-bit bayer packing utility for the unpacked data produced
by ipu3-unpack.
Usage: ipu3-unpack input-file output-file
The output-file can be "-" to pack the data to stdout.
The output file generated by ipu3-pack can be directly fed to IMGU
for streaming.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The media graph may include a CSI-2 receiver entity between the sensor
and the ISP for platforms that have a CSI-2 receiver external to the
ISP. Support this by configuring the pipeline accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The regexp to convert the raw pixel media bus code to a pixel format is
incorrect. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
With sensors supporting crop, the regexp used to parse the media-ctl
output isn't correct as the pad configuration may span multiple lines
and contain other parameters. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Delete frames previously captured before starting a new capture, to
avoid mixing old and new frames.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The load_image function would throw errors with JPEG or JPG files containing
no raw data.
Prevent throwing these errors by returning 0 if an error has occurred.
Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If issue.line is None, the the terminal color is never reset back to
normal. This causes the yellow color to bleed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera uses the "..." include style for internal headers. Enforce it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IncludeOrderFormatter will be extended with more formatting rules
that should be applied before clang-format gets run, as it will
influence its output.
Add a priority mechanism for formatters, and give a negative priority to
the CLangFormatter to make it run last.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The pre-push git hook script catches commits without a SoB line
corresponding to the committer, but doesn't perform the same check on
the author. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
It's to fix build errors with mojom in ChromeOS chroot. The reason is that
ChromeOS recently moves native mojom generators module into site-packages,
which has higher import precedence than the local namespace package and shadows
the local package of the same. Add __init__.py to make it an explicit package
to avoid shadowing.
Signed-off-by: Han-Lin Chen <hanlinchen@chromium.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul ELder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The intel-ipu3.h header has moved in the v5.14 kernel. Update the kernel
headers update script accordingly.
While at it, add a missing directory separator to fix a failure when the
path to the kernel tree doesn't end with a /.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The gen-tp-header script does not have execute permissions set on the
file.
Add the execute permission to ensure that meson runs this script
consistently in the same configuration as other scripts, without
invoking python itself separately.
Signed-off-by: Brian Olson <icic@bolson.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we have a UniqueFD class, the name FileDescriptor is ambiguous.
Rename it to SharedFD.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
IPCUnixSocket::create() creates two file descriptors. One of
them is stored in IPCUnixSocket and the other is returned to a
caller. This clarifies the ownership using UniqueFD.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
