| Age | Commit message (Collapse) | Author |
|---|
|
The BufferSource::allocate() return value isn't propagated correctly,
resulting in a test failure when the test should be skipped due to a
missing vivid device. Fix it.
While at it, return valid status codes from BufferSource::allocate() in
all error cases, with proper diagnostic messages.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that we're using C++-14, drop utils::make_unique for
std::make_unique.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add an initial simple test tool for the rkisp1 pipeline based upon the
IPU3 pipeline test.
Signed-off-by: Show Liu <show.liu@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the FrameBuffer rework completed there is no reason to keep the
camera prepared state around as buffer allocations are now decoupled
from the camera state. Remove the camera state simplifying the API.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Buffer interface is no longer in use and can be removed. While doing
so clean up the two odd names (dequeueFrameBuffer() and
queuedFrameBuffers_) that had to be used when adding the FrameBuffer
interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch to the FrameBuffer interface where all buffers are treated as
external buffers and are allocated outside the camera. Applications
allocating buffers using libcamera are switched to use the
FrameBufferAllocator helper.
Follow-up changes to this one will finalize the transition to the new
FrameBuffer interface by removing code that is left unused after this
change.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
With the FrameBuffer interface the V4L2 buffer indexes are not visible
outside the V4L2VideoDevice so it's not possible to to test that the
expected indexes are used when using external buffers (allocated
directly from a V4L2 video device) with a Camera. Rewrite the test to
this limitation.
The idea of the test stays the same, test that buffers allocated from a
V4L2 video device (vivid) can be imported and used on a Camera (vimc).
As an added bonus the rewrite makes use of the FrameBuffer interface for
the allocation of buffers at the source (vivid) and imports them to the
Camera which still uses the Buffer interface internally.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The V4L2VideoDevice class can now operate using a FrameBuffer interface,
switch all test cases to use it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the metadata retrieved when dequeuing a V4L2 buffer into a
FrameMetadata object. This is done as a step to migrate to the
FrameBuffer interface as the functions added to Buffer around
FrameMetadata match the ones in FrameBuffer.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the FrameBuffer interface the stream will not be available from the
buffer object as the buffer might be allocated externally. The
application needs to explicitly state which stream the buffer is being
added for to the request.
Extend the addBuffer() function to get this information explicitly from
the caller.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
It is not libcamera's responsibility to handle memory mappings. Switch
from the soon to be removed Plane class which deals with memory
mappings to FrameBuffer::Plane which just describes it. This makes the
transition to the full FrameBuffer easier.
As the full FrameBuffer interface has not yet spread to all parts of
libcamera core it is hard to create efficient caching of memory mappings
in the qcam application. This will be fixed in a later patch, for now
the dmabuf is mapped and unmapped each time it is seen by the
application.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the IPA interfaces and implementations to use the Framebuffer
interface.
- The IPA interface is switched to use the simpler FrameBuffer::Plane
container when carrying dmabuf descriptions (fd and length) over the
pipeline/IPA boundary.
- The RkISP1 IPA implementation takes advantage of the new simpler and
safer (better control over file descriptors) FrameBuffer interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a test which exercises the whole FileDescriptor interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Test that a signal can be connected to non-void static and member slots.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Test that Object::invokeMethod() can be used to invoke a non-void
method. Verify that the return value is correctly propagated to the
caller.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Test the ConnectionTypeDirect type when the object lives in a different
thread. This test passes but generates a memory leak.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Object::invokeMethod() fails with a compilation error when the invoked
method takes a reference argument. Add a test case for this issue.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The buffer index is a V4L2 concept that will be hidden from users with
the introduction of a new FrameBuffer class. In preparation for this,
remove the index from log messages.
Keep and move one debug log message where the index is available as the
V4L2 buffer is being dequeued for the video device and it's useful when
debugging.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The InvokeObject instance is created on the stack in the run() method,
and is thus destroyed before the thread the object is bound to
terminates. This creates a race condition as the object message handler
could be running when the object is deleted. Fix this by moving the
InvokeObject to a member field.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There's a race in the message delivery against object deletion. Add a
test that triggers it reliably. This test is expected to fail with an
assertion error.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Forward messages that we don't handle to the base Object class, to avoid
both blocking the ThreadMove message and mistaking it as the test
message.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Since commit fac471e812a9 ("test: Extract CameraTest class out of camera
tests to libtest") the control_list is a subclass of CameraTest, and the
status returned by the base class init() operation should be inspected
to avoid accessing uninitialized fields during the run() operation
execution.
If the VIMC test module is not loaded, executing the test results in a
segfault. Fix this by adding the init() operation where to status_ flag
is checked for errors.
Fixes: fac471e812a9 ("test: Extract CameraTest class out of camera tests to libtest")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Wrap an IPAInterface in an IPAInterfaceWrapper in an IPAContextWrapper,
and verify that the translation between C and C++ APIs work correctly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a test that exercises the ControlSerializer to serialize and
deserialize ControlInfoMap and ControlList.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The test exercises the API of the ByteStreamBuffer class in both read
and write modes, including carve out buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a test to exercise the ControlInfoMap API. This currently tests
at(), count(), find() and end().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Many tests other than the camera/ tests use a camera. To increase code
sharing, move the base CameraTest class to the test library. The class
becomes a helper that doesn't inherit from Test anymore (to avoid
diamond inheritance issues when more such helpers will exist).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
signal
The stream to buffer map in the requestCompleted signal is taken
directly from the request which is part of the same signal. Remove the
map as it can be fetched directly from the request.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove spaces between empty curly brackets (replacing { } with {}) to
comply with the coding style. Fix one other coding style violation on
the lines touched by those fixes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Comply with the coding style by removing lots of unneeded semicolons.
Fix a few other coding style violations on the lines touched by those
fixes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change the object-invoke test to perform the second method invocation
operation in blocking mode.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow specifying a different connection type than ConnectionTypeQueued
for Object::invokeMethod().
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Use DRM FourCC values for the newly defined PixelFormat.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that our usage of C compatibility header is documented, use them
consistently through the source code.
While at it, group the C and C++ include statements as defined in the
coding style, and fix a handful of #include ordering issues.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The V4L2ControlList class only provides a convenience constructor for
the ControlList, which can easily be moved to the ControlList class and
may benefit it later (to construct a ControlList from controls supported
by a camera). Move the constructor and remove V4L2ControlList.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ControlInfoMap and V4L2ControlInfoMap classes are very similar, with
the latter adding convenience accessors based on numerical IDs for the
former, as well as a cached idmap. Both features can be useful for
ControlInfoMap in the context of serialisation, and merging the two
classes will further simplify the IPA API.
Import all the features of V4L2ControlInfoMap into ControlInfoMap,
turning the latter into a real class. A few new constructors and
assignment operators are added for completeness.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
V4L2ControlRange only offers a convenience constructor for a
ControlRange. Store the ControlRange instead of V4L2ControlRange in
V4L2ControlInfoMap to make the map less dependent on V4L2 types.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2ControlInfo class only stores a ControlRange. Make it inherit
from ControlRange to provide a convenience constructor from a struct
v4l2_query_ext_ctrl and rename it to V4L2ControlRange.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A value check on the V4L2_CID_CONTRAST control is using the brightness
control range. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a utils::hex() function that simplifies writing hexadecimal values
to an ostream. The function handles the '0x' prefix, the field width and
the fill character automatically. Use it through the libcamera code
base, and add a test.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The V4L2Device class uses V4L2ControlList as a controls container for
the getControls() and setControls() operations. Having a distinct
container from ControlList will makes the IPA API more complex, as it
needs to explicitly transport both types of lists. This will become even
more painful when implementing serialisation and deserialisation.
To simplify the IPA API and ease the implementation of serialisation and
deserialisation, replace usage of V4L2ControlList with ControlList in
the V4L2Device (and thus CameraSensor) API. The V4L2ControlList class
becomes a thin wrapper around ControlList that slightly simplifies the
creation of control lists for V4L2 controls, and may be removed in the
future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a test that exercises the control enumeration, get and set APIs on a
V4L2Device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The ControlList class has template get() and set() methods to get and
set control values. The methods require a reference to a Control
instance, which is only available when calling them with a hardcoded
control. In order to support usage of ControlList for V4L2 controls, as
well as serialisation and deserialisation of ControlList, we need a way
to get and set control values based on a control numerical ID. Add new
contains(), get() and set() overload methods to do so.
As this change prepares the ControlList to be used for other objects
than camera, update its documentation accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Implement a basic test for IPA Interface using the VIMC dummy IPA
module. The test implements an out-of-band feedback channel between the
test and the dummy IPA module to verify the success of the IPA
interactions.
Test the only available operation defined by the IPA interface by
receiving a confirmation code on the fifo communication channel.
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Update the IPA test to match the test class name in prevision of adding
more IPA tests. Also update the description comment in the test unit, as
the old name for the test was still used.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The DummyIPA is actually a test IPA module for the virtual media
controller driver VIMC. Rename it accordingly to its usage.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Timers can't be started from another thread. Ensure that attempting to
do so fails.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Timer API allows restarting a timer before it expires. Add a
corresponding test. The test fails as the Timer class doesn't comply
with its API documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Verify that the timer deadline stays valid after the timer expires. As
the test now uses the deadline in order to compute the jitter, the
interval_ field isn't used anymore and can be removed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
