summaryrefslogtreecommitdiff
path: root/test
AgeCommit message (Collapse)Author
2024-06-03test: camera: Increase timeout for vimc capture testsLaurent Pinchart
On slower machines, a 1s timeout to capture frames with vimc can be too short and cause test failures. Make the timeout proportional to the number of frames expected to be captured, using a conservative low estimate of the frame rate at 2fps. By itself, that change could increase the test time quite substantially on fast platforms, so break from the capture loop as soon as we capture enough frames. To do so, interrupt the dispatcher at every request completion, or it will only get interrupted after the timer times out. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-31test: ipa: rkisp1-utils: Fix capitalization of hex numbersPaul Elder
Fix capitalization of the hexdecimal numbers in the test for conversion between floating point and fixed point numbers. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-31ipa: rkisp1: Add a helper to convert floating-point to fixed-pointPaul Elder
Add helper functions for converting between floating point and fixed point numbers. Also add tests for them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-14libcamera: pipeline: Rename pipelines to a shorter nameJulien Vuillaumier
The PipelineHandlerFactoryBase class has a name that is propagated to the PipelineHandler instance it creates. In present implementation, this name comes from the REGISTER_PIPELINE_HANDLER registration macro. It corresponds to the stringified name of the PipelineHandler derived class. Therefore, PipelineHandler factories and instances names can be quite long such as "PipelineHandlerRkISP1". A libcamera user may have to explicitly refer to a PipelineHandler name for configuration purpose: one usage of the name can be to define a pipeline handlers match list and their priorities. It is desired, for user convenience, to use a short name to designate a pipeline handler. Reusing the short pipeline names already defined in the meson option files is an existing and consistent way of naming pipelines. This change adds an explicit name parameter to the REGISTER_PIPELINE_HANDLER registration macro. That parameter is used to define the name of a pipeline handler factory, instead of the current pipeline handler class name. Each pipeline registration is updated accordingly. The short name assigned corresponds to the pipeline directory name in the source tree. It is consistent with pipelines names used in meson. Changing the pipeline name has an impact on the IPA modules: each module defines a IPAModuleInfo structure. This structure has a pipelineName member defining the pipeline handler name it shall match with. Therefore, each internal IPA module definition has to be changed to have its IPAModuleInfo pipelineName name updated with the short pipeline handler name. In addition to this pipelineName member, the IPAModuleInfo structure also has a name member, associated to the IPA module name. Having renamed the pipelines to a short name, the pipeline name and the IPA module names of the IPAModuleInfo structure are the same: for in-tree IPA, they correspond to the respective pipeline and IPA subdirectories in the source tree. However the IPA name could be different, for instance with a close source IPA implementation built out-of-tree. Thus, it makes sense to keep the IPA name in that structure, as the 2 definitions may not always be redundant. Signed-off-by: Julien Vuillaumier <julien.vuillaumier@nxp.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Adjust for clang-format style fix, reformat commitmsg] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-05-13test: gstreamer: Simplify single stream testNicolas Dufresne
The single stream test for the GStreamer component has a simple pipeline construction using only a fakesink. The implementation currently supports connecting to a more complex stream construction defined by the streamDescription, but this is over engineered for the simple need to start a stream to capture and discard the frames. Convert the use of gst_parse_bin_from_description_full() which uses only a single element 'fakesink' to construct the fakesink directly and link it to the libcamerasrc. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-05-09libcamera: Drop remaining file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment blocks in all remaining locations that were not caught by the automated script as they are out of sync with the file name. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-08libcamera: Drop file name from header comment blocksLaurent Pinchart
Source files in libcamera start by a comment block header, which includes the file name and a one-line description of the file contents. While the latter is useful to get a quick overview of the file contents at a glance, the former is mostly a source of inconvenience. The name in the comments can easily get out of sync with the file name when files are renamed, and copy & paste during development have often lead to incorrect names being used to start with. Readers of the source code are expected to know which file they're looking it. Drop the file name from the header comment block. The change was generated with the following script: ---------------------------------------- dirs="include/libcamera src test utils" declare -rA patterns=( ['c']=' \* ' ['cpp']=' \* ' ['h']=' \* ' ['py']='# ' ['sh']='# ' ) for ext in ${!patterns[@]} ; do files=$(for dir in $dirs ; do find $dir -name "*.${ext}" ; done) pattern=${patterns[${ext}]} for file in $files ; do name=$(basename ${file}) sed -i "s/^\(${pattern}\)${name} - /\1/" "$file" done done ---------------------------------------- This misses several files that are out of sync with the comment block header. Those will be addressed separately and manually. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
2024-05-07test: Don't add current build directory to include pathLaurent Pinchart
Meson adds the current source and build directory to the include path by default. This causes a namespace clash in tests when using C++20, as the Span class test is compiled into a binary named 'span', which then gets included by source code through indirect '#include <span>' directives. Unsurprisingly, the compiler doesn't react happily when fed binary data. We could work around the problem by renaming the test executable, but disabling the implicit inclusion of the local directory is a more generic solution that will avoid similar issues in the future. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2024-03-15libcamera: v4l2_subdevice: Rename V4L2SubdeviceFormat::mbus_code to codeLaurent Pinchart
The V4L2SubdeviceFormat::mbus_code member doesn't follow the libcamera coding style as it should use camelCase. Fix it by renaming it to just 'code', to shorten lines in addition to fixing the coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2024-03-12libcamera: controls: Add policy parameter to ControlList::merge()Stefan Klug
This is useful in many cases although not included in the stl. Note: This is an ABI incompatible change. Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
2024-01-25test: timer-thread: Destroy Object from correct thread contextLaurent Pinchart
The TimeoutHandler used in the test is destroyed from the main thread, which is invalid for a thread-bound object bound to a different thread. Fix it by destroying it with deleteLater(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: timer-thread: Move timer start from wrong thread to separate testLaurent Pinchart
Starting a timer from the wrong thread is expected to fail, and we test this in the timer-thread unit test. This is however not something that a caller is allowed to do, and libcamera will get assertion failures to catch this invalid usage. The unit test will then fail. To prepare for this, split the unit test in two, with a test that is expected by meson to succeed, and one that is expected to fail. The assertion will then cause an expected failure, making the test suite succeed. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: signal-threads: Destroy Object from correct thread contextLaurent Pinchart
The SignalReceiver used in the test is destroyed from the main thread, which is invalid for a thread-bound object bound to a different thread. Fix it by destroying it with deleteLater(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: message: Destroy Object from correct thread contextLaurent Pinchart
The MessageReceiver and RecursiveMessageReceiver used in the test are destroyed from the main thread, which is invalid for a thread-bound object bound to a different thread. Fix it by destroying them with deleteLater(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: message: Remove incorrect slow receiver testLaurent Pinchart
The slow receiver test verifies there's no race condition between concurrent message delivery and object deletion. This is not a valid use case in the first place, as objects are not allowed to be deleted from a different thread than the one they are bound to. Remove the incorrect test. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: event-thread: Destroy Object from correct thread contextLaurent Pinchart
The EventHandler used in the test is destroyed from the main thread, which is invalid for a thread-bound object bound to a different thread. Fix it by destroying it with deleteLater(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25test: object-delete: Test deferred delete just before thread stopsLaurent Pinchart
The Object::deleteLater() function is expected to not race with stopping the thread the object is bound to. Add a test for this. The test currently fails, demonstrating a bug in libcamera. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-25libcamera: signal: Replace object.h inclusion with forward declatationLaurent Pinchart
The signal.h header doesn't need to include object.h. Replace it with a forward declaration, and instead include object.h in source files that require it. It can speed up compilation a little bit, but more importantly avoids unintended dependencies from the Signal class to the Object class to be added later as the compiler will catch them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
2024-01-23test: gstreamer: Use env instead of registry editNicolas Dufresne
Instead of editing the registry, use gst_env variable provided by the plugin and already used as part of the devenv shell. This reduces the complexity of the C++ test code. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: gstreamer: Remove videoconvert element from pipelineLaurent Pinchart
The GStreamer single stream test uses the following pipeline: libcamerasrc ! videoconvert ! fakesink The videoconvert element isn't useful as the data is thrown away by the fakesink anyway. We can shorten the pipeline to libcamerasrc ! fakesink to save CPU time and to avoid depending on the gstreamer1.0-plugins-base package to run the unit tests. The test could be further simplified by replacing gst_parse_bin_from_description_full() with gst_element_factory_make(), now that we only add one element to the bin. The extra cost incurred by the bin only impacts initialization time, and using a bin will make it easier to add other elements in the future if needed. Keep the bin, and only drop the videoconvert element. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: ipc: unixsocket: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Increase process exit timeoutLaurent Pinchart
When running tests on slower devices, 200ms is too low to wait for the process to exit. Increase the timeout to 2s. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Improve debugging on process exit failuresLaurent Pinchart
When the process fails to run and exit normally, the test prints an error message that provides little information: process did not exit normally Expand the error message to print the exit status to make debugging easier. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Fix uninitialized variable on process exit failureLaurent Pinchart
If the process fails to exit before the timeout, the LogProcessTest::exitStatus_ variable gets used uninitialized. Fix it by initializating to Process::NotExited. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-07test: log: log_process: Log an error when failing due to incorrect messageLaurent Pinchart
One of the error paths in the test returns without logging a message, which makes failures difficult to debug. Fix it by adding an error message. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-12-06test: gstreamer: Fix indentation in commentsLaurent Pinchart
A couple of comments are mis-indented in the gstreamer unit test. Fix them, and reflow the text while at it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-10-23test: Add unit test for Transform and OrientationJacopo Mondi
Add a unit test for Transform and Orientation to validate the implementation of the operations between the two types. In particular, test that: o1 / o2 = t o2 * t = o1 Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-07-11tests: gstreamer: Fix compiler error with gcc 8.4.0Laurent Pinchart
The provider g_autoptr variable introduced by commit adb1bbb748a1 ("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider") is left uninitialized when declared. The cleanup function could thus get called on an unitialized variable if the scope was exited before the variable gets initialized. This can't occur here, but gcc 8.4.0 still complains about it: /usr/include/glib-2.0/glib/gmacros.h: In member function ‘virtual int GstreamerDeviceProviderTest::run()’: /usr/include/glib-2.0/glib/gmacros.h:1049:27: error: ‘provider’ may be used uninitialized in this function [-Werror=maybe-uninitialized] { if (_ptr) (cleanup) ((ParentName *) _ptr); } \ ^ ../test/gstreamer/gstreamer_device_provider_test.cpp:37:32: note: ‘provider’ was declared here g_autoptr(GstDeviceProvider) provider; Silence the error by initializing the variable to NULL at declaration time. This is a good practice in any case, as later refactoring could otherwise introduce a scope exit before initialization. Fixes: adb1bbb748a1 ("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-07-07meson: Fix space around colon issuesLaurent Pinchart
The meson style, which libcamera follows, recommends a space before colons in function parameters. Fix the style violations through the project. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-07-06tests: gstreamer: Test cameras' enumeration from GstDeviceProviderUmang Jain
Test the enumeration of the cameras through GstDeviceProvider against the libcamera camera manager. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2023-06-04py: unittests.py: Fix type checker warningsTomi Valkeinen
Fix type checker warnings by dropping unused imports and using _ for variable names that are not used. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: unittests.py: Add weakref helpers and use delTomi Valkeinen
Add helpers to check if a weakref or a list of weakrefs is alive or dead. Also use 'del' for local variables instead of setting the variable to None. This makes debugging the test easier as the locals will be gone from locals() dict. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: Use exceptions instead of returning error codesTomi Valkeinen
We have multiple methods which return an error code, mimicking the C++ API. Using exceptions is more natural in the Python API, so change all those methods to raise an Exception instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-30py: Fix CameraManager.version propertyTomi Valkeinen
The current CameraManager.version doesn't work at all (raises a TypeError), as that's not how you use expose C++ static methods as Python class methods. Fix it. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-20test: controls: control_info_map: Test default constructorMattijs Korpershoek
ControlInfoMap can be default-constructed. In that case, some of its members (like idmap_) can be a nullptr, and ControlInfoMap.find() will segfault. Add a test with a default constructed ControlInfoMap to cover this. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-24test: Drop pipeline testLaurent Pinchart
The two pipeline test (for ipu3 and rkisp1) are meant to perform very basic validation of the corresponding pipeline handlers, limited to verifying camera enumeration. They are not unit tests as such, they are superseded by the lc-compliance tool, and they are never used in practice (and always skipped). Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-12-24test: py: Fix test failure when ASan is enabledLaurent Pinchart
When the address sanitizer is enabled, the Python unit tests fail due to the link order runtime check as the Python interpreter is (generally) not linked to ASan. Fix this by LD_PRELOAD'ing the ASan runtime. We have to disable the leak detector as the Python interpreter itself leaks memory, which would result in test failures. To LD_PRELOAD the ASan runtime, the path to the binary needs to be known. gcc gives us a generic way to get the path, but that doesn't work with clang as the ASan runtime file name depends on the clang version and target architecture. We thus have to keep the Python test disabled when ASan is enabled and libcamera is compiled with clang. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-12-24test: v4l2_compat: Enable test with ASanLaurent Pinchart
When libcamera is compiled with the address sanitizer enabled, the v4l2_compat test generates failures in the link order runtime check, as the host v4l2-ctl and v4l2-compliance tools are not (generally) linked to ASan. For this reason, the test is disabled, which sadly shrinks test coverage. Fix this by loading the ASan runtime using LD_PRELOAD. This needs to be done from within the v4l2_compat_test.py Python script, as the Python interpreter itself leaks memory and would cause test failures if run with ASan. To LD_PRELOAD the ASan runtime, the path to the binary needs to be known. gcc gives us a generic way to get the path, but that doesn't work with clang as the ASan runtime file name depends on the clang version and target architecture. We thus have to keep the v4l2_compat test disabled when ASan is enabled and libcamera is compiled with clang. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-12-24test: v4l2_compat: Reduce indentationLaurent Pinchart
Return early with subdir_done() to reduce indentation in case the v4l2_compat layer is not enabled. This matches our usual code patterns in meson.build files, and prepares for enabling the v4l2_compat test with ASan. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-12-16test: controls: control_info: Test default def() valuesLaurent Pinchart
Extend the ControlInfo test to verify the behaviour of the default 'def' argument to the ControlInfo constructor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-24libcamera: Test sensor's ability to discover ancillary devicesYunke Cao
Use vimc lens to test sensor's ability to discover ancillary lens. Tested with the recent kernel patch for vimc lens: https://lore.kernel.org/linux-media/20220415023855.2568366-1-yunkec@google.com/ Signed-off-by: Yunke Cao <yunkec@google.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-08test: camera_reconfigure: Qualify move() with std:: namespaceLaurent Pinchart
clang-15 warns about unqualified std cast calls: ../../test/camera/camera_reconfigure.cpp:101:24: error: unqualified call to 'std::move' [-Werror,-Wunqualified-std-cast-call] requests_.push_back(move(request)); ^ std:: Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-10-18ipa: vimc: Add Flags to parametersPaul Elder
For the purpose of testing serializing/deserializing Flags in function parameters, add an enum class TestFlags and Flags<TestFlags> to some function parameters, both for input and output and Signals. While at it, update the ipa_interface_test. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: vimc: Add IPAOperationCode to init() parameter listPaul Elder
For the purpose of testing serializing/deserializing enums in function parameters, add IPAOperationCode to the parameter list of init(). Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18test: generated_serializer: Test Flags that is struct memberPaul Elder
Add fields to the test struct to test serialization/deserialization of scoped enums and flags that are struct members. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-18test: generated_serializer: Test enum that is struct memberPaul Elder
Add an enum field to the test struct member to test serialization/deserialization of enums that are struct members. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-10libcamera: base: utils: Drop defoptLaurent Pinchart
utils::defopt causes compilation issues on gcc 8.0.0 to gcc 8.3.0, likely due to bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86521 that was fixed in gcc 8.4.0. gcc 8.3.0 may be considered old (libcamera requires gcc-8 or newer), but it is shipped by Debian 10 that has LTS support until mid-2024. As no workaround has been found to fix compilation on gcc 8.3.0 while still retaining the functionality of utils::defopt, remove it from the libcamera base library. This change could be reverted once support for gcc-8 will be dropped. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-07libcamera: pipeline_handler: Implement factories through class templatesLaurent Pinchart
The REGISTER_PIPELINE_HANDLER() macro defines a class type that inherits from the PipelineHandlerFactory class, and implements a constructor and a createInstance() function. Replace the code generation through macro with the C++ equivalent, a class template, as done in libipa with the Algorithm and CameraSensorHelper factories. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-07libcamera: pipeline_handler: Return unique_ptr from createInstanceLaurent Pinchart
Avoid naked pointer with memory allocation by returning a unique_ptr from PipelineHandlerFactory::createInstance(), in order to increase memory allocation safety. This allows iterating over factories in the CameraManager and unit tests using const pointers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-07test: meson: Use dictionaries instead of arrays to store test informationLaurent Pinchart
Tests are listed in meson.build using arrays that contain the test name and source files at fixed positions. This isn't very readable, leading to code using test[0], test[1] and test[2]. Replace the arrays with dictionaries to improve readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>