summaryrefslogtreecommitdiff
path: root/test/camera
AgeCommit message (Collapse)Author
2020-03-06test: camera: buffer_import: Fix error messagesNiklas Söderlund
The error message for when a device name can't be resolved to a video device is wrong and applies to the next operation below it. Move it to its correct location and add a new error message to highlight the resolution failure. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-02-18test: camera: buffer_import: Don't include <random>Laurent Pinchart
The <random> header isn't needed since commit 6e1e847753fd ("test: camera: buffer_import: Update to FrameBuffer restrictions"). Don't include it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-20test: buffer_import: Propagate status code from buffer allocationLaurent Pinchart
The BufferSource::allocate() return value isn't propagated correctly, resulting in a test failure when the test should be skipped due to a missing vivid device. Fix it. While at it, return valid status codes from BufferSource::allocate() in all error cases, with proper diagnostic messages. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-01-12libcamera: camera: Remove the prepared stateNiklas Söderlund
With the FrameBuffer rework completed there is no reason to keep the camera prepared state around as buffer allocations are now decoupled from the camera state. Remove the camera state simplifying the API. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: Switch to FrameBuffer interfaceNiklas Söderlund
Switch to the FrameBuffer interface where all buffers are treated as external buffers and are allocated outside the camera. Applications allocating buffers using libcamera are switched to use the FrameBufferAllocator helper. Follow-up changes to this one will finalize the transition to the new FrameBuffer interface by removing code that is left unused after this change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12test: camera: buffer_import: Update to FrameBuffer restrictionsNiklas Söderlund
With the FrameBuffer interface the V4L2 buffer indexes are not visible outside the V4L2VideoDevice so it's not possible to to test that the expected indexes are used when using external buffers (allocated directly from a V4L2 video device) with a Camera. Rewrite the test to this limitation. The idea of the test stays the same, test that buffers allocated from a V4L2 video device (vivid) can be imported and used on a Camera (vimc). As an added bonus the rewrite makes use of the FrameBuffer interface for the allocation of buffers at the source (vivid) and imports them to the Camera which still uses the Buffer interface internally. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: buffer: Move captured metadata to FrameMetadataNiklas Söderlund
Move the metadata retrieved when dequeuing a V4L2 buffer into a FrameMetadata object. This is done as a step to migrate to the FrameBuffer interface as the functions added to Buffer around FrameMetadata match the ones in FrameBuffer. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: request: In addBuffer() do not fetch stream from BufferNiklas Söderlund
In the FrameBuffer interface the stream will not be available from the buffer object as the buffer might be allocated externally. The application needs to explicitly state which stream the buffer is being added for to the request. Extend the addBuffer() function to get this information explicitly from the caller. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: buffer: Switch from Plane to FrameBuffer::PlaneNiklas Söderlund
It is not libcamera's responsibility to handle memory mappings. Switch from the soon to be removed Plane class which deals with memory mappings to FrameBuffer::Plane which just describes it. This makes the transition to the full FrameBuffer easier. As the full FrameBuffer interface has not yet spread to all parts of libcamera core it is hard to create efficient caching of memory mappings in the qcam application. This will be fixed in a later patch, for now the dmabuf is mapped and unmapped each time it is seen by the application. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-20test: Extract CameraTest class out of camera tests to libtestLaurent Pinchart
Many tests other than the camera/ tests use a camera. To increase code sharing, move the base CameraTest class to the test library. The class becomes a helper that doesn't inherit from Test anymore (to avoid diamond inheritance issues when more such helpers will exist). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-11-19libcamera: camera: Remove explicit stream to buffer map in requestCompleted ↵Niklas Söderlund
signal The stream to buffer map in the requestCompleted signal is taken directly from the request which is part of the same signal. Remove the map as it can be fetched directly from the request. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-08libcamera: Remove unneeded semicolonsLaurent Pinchart
Comply with the coding style by removing lots of unneeded semicolons. Fix a few other coding style violations on the lines touched by those fixes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-10-28libcamera: Switch PixelFormat to DRM FourCC valuesJacopo Mondi
Use DRM FourCC values for the newly defined PixelFormat. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-09-16test: buffer_import: Initialize video_ to nullptrJacopo Mondi
When the vivid module used to test buffer importing is not loaded, the test correctly bails out, but during the clean up procedure tries to access the video_ field, which, if not correctly initialized to nullptr contains random values and accessing it causes a segfault. Fix this by initializing video_ field to nullptr to make sure it is properly handled in cleanup(). Fixes: e1a5873701a9 ("test: camera: Add buffer import and mapping test") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2019-08-19libcamera: camera_manager: Construct CameraManager instances manuallyLaurent Pinchart
The CameraManager class is not supposed to be instantiated multiple times, which led to a singleton implementation. This requires a global instance of the CameraManager, which is destroyed when the global destructors are executed. Relying on global instances causes issues with cleanup, as the order in which the global destructors are run can't be controlled. In particular, the Android camera HAL implementation ends up destroying the CameraHalManager after the CameraManager, which leads to use-after-free problems. To solve this, remove the CameraManager::instance() method and make the CameraManager class instantiable directly. Multiple instances are still not allowed, and this is enforced by storing the instance pointer internally to be checked when an instance is created. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-08-19test: camera: Use the CameraManager from the CameraTest base classLaurent Pinchart
Make the camera manager a protected field of the CameraTest class, and use it instead of CameraManager::instance() in the camera tests. This prepares for the removal of CameraManager::instance(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-08-11libcamera: pipeline: vimc: Switch to using the RGB/YUV Capture video nodeNiklas Söderlund
Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer format") which is part of v5.2 changes the default media bus format for the debayer subdevices. This leads to a -EPIPE error when trying to use the raw capture video device nodes. Fix this by moving the vimc pipeline to use the RGB/YUV Capture capture video node. As a consequence of this change the scaler in the vimc pipeline is used and a hard coded upscale of 3 is present in the video pipeline. This limits the sizes exposed and accepted by libcamera to multiples of 3. Update the buffer import test case to match this new format constraint by setting the resolution to 1920x1080, a resolution which works with both vimc and vivid. With this new resolution the buffer import test takes a bit more time to complete 60 buffers and it's runtime also needs to be increased. The raw capture video node still needs to be handled by the pipeline as its format needs to be updated to allow the pipeline format validation to pass. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-01test: camera: buffer_import: clear video pointerKieran Bingham
The FrameSink::cleanup() call checks if video_ is set before cleaning up and then deleting the object. If the cleanup() call is called twice for any reason, this will encounter a use-after-free as the video_ pointer is not cleared after deletion. Whilst cleanup() is not currently called twice consecutively, to prevent errors in the future, make it explicit that the object has been deleted by clearing the stale pointer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-07-14test: camera: Add buffer import and mapping testJacopo Mondi
Test buffer importing and mapping by streaming the VIMC camera to VIVID video output device performing zero-copy memory sharing using dmabuf file descriptors. The test cycle 20 buffers between the camera and the output with a 1:1 buffer index to dmabuf fd mapping, then randomises the mapping with the same number of buffers on each side for 20 more frames, to finally increase the number of buffers on the output side for the 20 last frames. No remapping of dmabuf fd to buffer index should occur for the first 40 frames. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: Stop using Stream::bufferPool to get the number of buffersLaurent Pinchart
The cam and qcam applications, as well as the camera capture test case, access the Stream::bufferPool in order to know how many requests to initially queue. As part of an effort to remove access to the buffer pool from applications, use the buffer count from the stream configuration instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Split memory information to BufferMemoryLaurent Pinchart
The Buffer class is a large beast the stores information about the buffer memory, dynamic metadata related to the frame stored in the buffer, and buffer reference data (in the index). In order to implement buffer import we will need to extend this with dmabuf file descriptors, making usage of the class even more complex. Refactor the Buffer class by splitting the buffer memory information to a BufferMemory class, and repurposing the Buffer class to reference a buffer and to store dynamic metadata. The BufferMemory class becomes a long term storage, valid and stable from the time buffer memory is allocated to the time it is freed. The Buffer class, on the other hand, becomes transient, is created on demand when an application requires a buffer, is given to a request, and is deleted when the request completes. Buffer and BufferMemory don't need to be copied, so their copy constructor and assignment operators are deleted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-06-11test: camera: Increase runtime for capture testNiklas Söderlund
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state before sleep") changes the frame rate when capturing from the vimc raw capture video nodes. The commit changes the frame rate from thousands of frames per second to to roughly fifty. The libcamera capture test was written with the assumption that vimc would keep providing this fast frame rate and ran for a very short time to decrease the overall run time of tests. This is no longer possible and the test fails as it can't capture enough frames in its runtime, increase the runtime to match the new vimc frame rate. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-10test: camera: Fix initialisationKieran Bingham
Three tests {capture,configuration_set,statemachine} override the CameraTest::init() function, and call it as the first action. However they were not checking the return value, and each of the tests will segfault if the VIMC camera is not obtained. Check the return value of the CameraTest base class initialisation and return any errors to the test suite if initialisation fails. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23meson: Create and use a dependency for libcamera and its headersLaurent Pinchart
Instead of manually adding the libcamera library and include path to every target that requires it, declare a dependency that groups the headers as source, the library and the include path, and use it through the project. This simplifies handling of the dependency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23meson: Fix coding style in meson.build filesLaurent Pinchart
Consistently go for 4 spaces indentation, and always put a space between the colon in argument lists, as per the examples from the meson documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-05-23libcamera: camera: Add a validation API to the CameraConfiguration classLaurent Pinchart
The CameraConfiguration class implements a simple storage of StreamConfiguration with internal validation limited to verifying that the stream configurations are not empty. Extend this mechanism by implementing a smart validate() method backed by pipeline handlers. This new mechanism changes the semantic of the camera configuration. The Camera::generateConfiguration() operation still generates a default configuration based on roles, but now also supports generating empty configurations to be filled by applications. Applications can inspect the configuration, optionally modify it, and validate it. The validation implements "try" semantics and adjusts invalid configurations instead of rejecting them completely. Applications then decide whether to accept the modified configuration, or try again with a different set of parameters. Once the configuration is valid, it is passed to Camera::configure(), and pipeline handlers are guaranteed that the configuration they receive is valid. A reference to the Camera may need to be stored in the CameraConfiguration derived classes in order to access it from their validate() implementation. This must be stored as a std::shared_ptr<> as the CameraConfiguration instances belong to applications. In order to make this possible, make the Camera class inherit from std::shared_from_this<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-05-23libcamera: camera: Return a pointer from generateConfiguration()Laurent Pinchart
To prepare for specialising the CameraConfiguration class in pipeline handlers, return a pointer to a camera configuration instead of a reference from Camera::generateConfiguration(). The camera configuration always needs to be allocated from the pipeline handler, and its ownership is passed to the application. For symmetry, change Camera::configure() to take a CameraConfiguration pointer instead of a reference. This aligns with our coding practice of passing parameters that are modified by the callee by pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Refactor the camera configuration storage and APILaurent Pinchart
Refactor the CameraConfiguration structure to not rely on Stream instances. This is a step towards making the camera configuration object more powerful with configuration validation using "try" semantics. The CameraConfiguration now exposes a simple vector-like API to access the contained stream configurations. Both operator[]() and at() are provided to access elements. The isEmpty() method is renamed to empty() and the methods reordered to match the std::vector class. As applications need access to the Stream instances associated with the configuration entries in order to associate buffers with streams when creating requests, expose the stream selected by the pipeline handler through a new StreamConfiguration::stream(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Use stream roles directly instead of StreamUsageLaurent Pinchart
In order to prepare for an API overhall of the camera configuration generation, remove the StreamUsage class and replace its uses by stream roles. The size hints can't be specified anymore, and will be replaced with an API on the StreamConfiguration to negotiate configuration parameters with cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: camera: Rename configureStreams() and streamConfiguration()Laurent Pinchart
Rename the configureStreams() and streamConfiguration() methods to configure() and generateConfiguration() respectively in order to clarify the API. Both methods deal with CameraConfiguration objects, and are thus not limited to streams, even if a CameraConfiguration currently contains streams only. While at it, remove the qcam MainWindow::configureStreams() method that is declared but never defined or used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-30test: Unify naming of configurations in testsLaurent Pinchart
Name all instances of CameraConfiguration "config", and all instances of StreamConfiguration "cfg" accross all tests. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-04-30libcamera: Use the Size class through libcameraLaurent Pinchart
Several of our structures include width and height fields that model a size while we have a Size class for that purpose. Use the Size class through libcamera, and give it a toString() method like other geometry and format classes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-04-09libcamera: Switch to CameraConfigurationNiklas Söderlund
Implement the camera configuration thru out the library, tests, cam and qcam tools. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: camera: Add support for stream usagesNiklas Söderlund
Instead of requesting the default configuration for a set of streams where the application has to figure out which streams provided by the camera is best suited for its intended usage, have the library figure this out by using stream usages. The application asks the library for a list of streams and a suggested default configuration for them by supplying a list of stream usages. Once the list is retrieved the application can fine-tune the returned configuration and then try to apply it to the camera. Currently no pipeline handler is prepared to handle stream usages but nor did it make use of the list of Stream IDs which was the previous interface. The main reason for this is that all cameras currently only provide one stream each. This will still be the case but the API will be prepared to expand both pipeline handlers and applications to support streams usages. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-04test: camera: Remove test for bad Stream IDsNiklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera remove test that stream IDs must be valid as the data type passed to Camera::streamConfiguration() will change. This change is in preparation for an invasive change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-04test: camera: Remove streams argument from configurationValid()Niklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera remove the streams and validation using the stream when judging if a camera configuration is valid. This is needed as once stream usage hints are added applications will no longer fetch default configuration based on Stream IDs so using them to verify the returned format is not useful. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-14test: camera: Add state machine testNiklas Söderlund
Add a test of the different access level enforced by the state machine inside the camera. The state machine aims to limit operations on the camera to the cameras state. The test exercises all states of the camera and verifies that only the intended operations are possible at each stage. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add capture testNiklas Söderlund
Correctly configure the camera using the default configuration and run a capture session for 100 milliseconds, which is plenty of time, in tests over 600 requests completed using the vimc pipeline. The test passes if at least the number of buffers used in the capture times two number of requests completes to prove we cycle through all buffers. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add setting of configuration testNiklas Söderlund
Try to set the default configuration, a modified valid configuration and an invalid configuration. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-03-14test: camera: Add read default configuration testNiklas Söderlund
Add a test to verify reading the default configuration from a camera works. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>