summaryrefslogtreecommitdiff
path: root/test/camera/capture.cpp
AgeCommit message (Collapse)Author
2020-08-14libcamera: request: Declare a using directive for map of buffersNiklas Söderlund
Declare a using directive for the map of Stream to FrameBuffer. Update all users of Request::buffers() to use the new usage directive. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-05libcamera: pipelines: Use sensor ID as camera nameNiklas Söderlund
Use the CameraSensor ID as the camera name in pipelines that uses a CameraSensors, this is done in preparation of turning the camera name into an ID. The CameraSensor ID meets the requirements that will be put on camera ID. Before this change example of camera names: * OF based systems ov5695 7-0036 ov2685 7-003c * ACPI based systems ov13858 8-0010 ov5670 10-0036 * VIMC VIMC Sensor B After this change the same cameras are: * OF based systems /base/i2c@ff160000/camera@36 /base/i2c@ff160000/camera@36 * ACPI based systems \_SB_.PCI0.I2C2.CAM0 \_SB_.PCI0.I2C4.CAM1 * VIMC platform/vimc.0 Sensor B Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-03-18libcamera: framebuffer_allocator: Lift camera restrictions on allocatorLaurent Pinchart
The Camera class currently requires the allocator to have no allocated buffer before the camera is reconfigured, and the allocator to be destroyed before the camera is released. There's no basis for these restrictions anymore, remove them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-12libcamera: camera: Remove the prepared stateNiklas Söderlund
With the FrameBuffer rework completed there is no reason to keep the camera prepared state around as buffer allocations are now decoupled from the camera state. Remove the camera state simplifying the API. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: Switch to FrameBuffer interfaceNiklas Söderlund
Switch to the FrameBuffer interface where all buffers are treated as external buffers and are allocated outside the camera. Applications allocating buffers using libcamera are switched to use the FrameBufferAllocator helper. Follow-up changes to this one will finalize the transition to the new FrameBuffer interface by removing code that is left unused after this change. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: buffer: Move captured metadata to FrameMetadataNiklas Söderlund
Move the metadata retrieved when dequeuing a V4L2 buffer into a FrameMetadata object. This is done as a step to migrate to the FrameBuffer interface as the functions added to Buffer around FrameMetadata match the ones in FrameBuffer. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-12libcamera: request: In addBuffer() do not fetch stream from BufferNiklas Söderlund
In the FrameBuffer interface the stream will not be available from the buffer object as the buffer might be allocated externally. The application needs to explicitly state which stream the buffer is being added for to the request. Extend the addBuffer() function to get this information explicitly from the caller. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-20test: Extract CameraTest class out of camera tests to libtestLaurent Pinchart
Many tests other than the camera/ tests use a camera. To increase code sharing, move the base CameraTest class to the test library. The class becomes a helper that doesn't inherit from Test anymore (to avoid diamond inheritance issues when more such helpers will exist). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-11-19libcamera: camera: Remove explicit stream to buffer map in requestCompleted ↵Niklas Söderlund
signal The stream to buffer map in the requestCompleted signal is taken directly from the request which is part of the same signal. Remove the map as it can be fetched directly from the request. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-08-19test: camera: Use the CameraManager from the CameraTest base classLaurent Pinchart
Make the camera manager a protected field of the CameraTest class, and use it instead of CameraManager::instance() in the camera tests. This prepares for the removal of CameraManager::instance(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-07-14libcamera: Stop using Stream::bufferPool to get the number of buffersLaurent Pinchart
The cam and qcam applications, as well as the camera capture test case, access the Stream::bufferPool in order to know how many requests to initially queue. As part of an effort to remove access to the buffer pool from applications, use the buffer count from the stream configuration instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-07-14libcamera: buffer: Split memory information to BufferMemoryLaurent Pinchart
The Buffer class is a large beast the stores information about the buffer memory, dynamic metadata related to the frame stored in the buffer, and buffer reference data (in the index). In order to implement buffer import we will need to extend this with dmabuf file descriptors, making usage of the class even more complex. Refactor the Buffer class by splitting the buffer memory information to a BufferMemory class, and repurposing the Buffer class to reference a buffer and to store dynamic metadata. The BufferMemory class becomes a long term storage, valid and stable from the time buffer memory is allocated to the time it is freed. The Buffer class, on the other hand, becomes transient, is created on demand when an application requires a buffer, is given to a request, and is deleted when the request completes. Buffer and BufferMemory don't need to be copied, so their copy constructor and assignment operators are deleted. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-06-11test: camera: Increase runtime for capture testNiklas Söderlund
Upstream commit 2978a505aaa981b2 ("media: vimc: stream: fix thread state before sleep") changes the frame rate when capturing from the vimc raw capture video nodes. The commit changes the frame rate from thousands of frames per second to to roughly fifty. The libcamera capture test was written with the assumption that vimc would keep providing this fast frame rate and ran for a very short time to decrease the overall run time of tests. This is no longer possible and the test fails as it can't capture enough frames in its runtime, increase the runtime to match the new vimc frame rate. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-06-10test: camera: Fix initialisationKieran Bingham
Three tests {capture,configuration_set,statemachine} override the CameraTest::init() function, and call it as the first action. However they were not checking the return value, and each of the tests will segfault if the VIMC camera is not obtained. Check the return value of the CameraTest base class initialisation and return any errors to the test suite if initialisation fails. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-05-23libcamera: camera: Add a validation API to the CameraConfiguration classLaurent Pinchart
The CameraConfiguration class implements a simple storage of StreamConfiguration with internal validation limited to verifying that the stream configurations are not empty. Extend this mechanism by implementing a smart validate() method backed by pipeline handlers. This new mechanism changes the semantic of the camera configuration. The Camera::generateConfiguration() operation still generates a default configuration based on roles, but now also supports generating empty configurations to be filled by applications. Applications can inspect the configuration, optionally modify it, and validate it. The validation implements "try" semantics and adjusts invalid configurations instead of rejecting them completely. Applications then decide whether to accept the modified configuration, or try again with a different set of parameters. Once the configuration is valid, it is passed to Camera::configure(), and pipeline handlers are guaranteed that the configuration they receive is valid. A reference to the Camera may need to be stored in the CameraConfiguration derived classes in order to access it from their validate() implementation. This must be stored as a std::shared_ptr<> as the CameraConfiguration instances belong to applications. In order to make this possible, make the Camera class inherit from std::shared_from_this<>. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-05-23libcamera: camera: Return a pointer from generateConfiguration()Laurent Pinchart
To prepare for specialising the CameraConfiguration class in pipeline handlers, return a pointer to a camera configuration instead of a reference from Camera::generateConfiguration(). The camera configuration always needs to be allocated from the pipeline handler, and its ownership is passed to the application. For symmetry, change Camera::configure() to take a CameraConfiguration pointer instead of a reference. This aligns with our coding practice of passing parameters that are modified by the callee by pointer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Refactor the camera configuration storage and APILaurent Pinchart
Refactor the CameraConfiguration structure to not rely on Stream instances. This is a step towards making the camera configuration object more powerful with configuration validation using "try" semantics. The CameraConfiguration now exposes a simple vector-like API to access the contained stream configurations. Both operator[]() and at() are provided to access elements. The isEmpty() method is renamed to empty() and the methods reordered to match the std::vector class. As applications need access to the Stream instances associated with the configuration entries in order to associate buffers with streams when creating requests, expose the stream selected by the pipeline handler through a new StreamConfiguration::stream(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: Use stream roles directly instead of StreamUsageLaurent Pinchart
In order to prepare for an API overhall of the camera configuration generation, remove the StreamUsage class and replace its uses by stream roles. The size hints can't be specified anymore, and will be replaced with an API on the StreamConfiguration to negotiate configuration parameters with cameras. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-05-23libcamera: camera: Rename configureStreams() and streamConfiguration()Laurent Pinchart
Rename the configureStreams() and streamConfiguration() methods to configure() and generateConfiguration() respectively in order to clarify the API. Both methods deal with CameraConfiguration objects, and are thus not limited to streams, even if a CameraConfiguration currently contains streams only. While at it, remove the qcam MainWindow::configureStreams() method that is declared but never defined or used. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-04-30test: Unify naming of configurations in testsLaurent Pinchart
Name all instances of CameraConfiguration "config", and all instances of StreamConfiguration "cfg" accross all tests. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2019-04-09libcamera: Switch to CameraConfigurationNiklas Söderlund
Implement the camera configuration thru out the library, tests, cam and qcam tools. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-05libcamera: camera: Add support for stream usagesNiklas Söderlund
Instead of requesting the default configuration for a set of streams where the application has to figure out which streams provided by the camera is best suited for its intended usage, have the library figure this out by using stream usages. The application asks the library for a list of streams and a suggested default configuration for them by supplying a list of stream usages. Once the list is retrieved the application can fine-tune the returned configuration and then try to apply it to the camera. Currently no pipeline handler is prepared to handle stream usages but nor did it make use of the list of Stream IDs which was the previous interface. The main reason for this is that all cameras currently only provide one stream each. This will still be the case but the API will be prepared to expand both pipeline handlers and applications to support streams usages. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-04-04test: camera: Remove streams argument from configurationValid()Niklas Söderlund
In preparation of reworking how a default configuration is retrieved from a camera remove the streams and validation using the stream when judging if a camera configuration is valid. This is needed as once stream usage hints are added applications will no longer fetch default configuration based on Stream IDs so using them to verify the returned format is not useful. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2019-03-14test: camera: Add capture testNiklas Söderlund
Correctly configure the camera using the default configuration and run a capture session for 100 milliseconds, which is plenty of time, in tests over 600 requests completed using the vimc pipeline. The test passes if at least the number of buffers used in the capture times two number of requests completes to prove we cycle through all buffers. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>