| Age | Commit message (Collapse) | Author |
|---|
|
When a MediaDevice is enumerated and populated by the
DeviceEnumeratorUdev, there is a possibility that the member device
nodes of the media graph would not be ready (either not created, or
without proper permissions set by udev yet). The MediaDevice is still
passed up to the pipeline handler, where an attempt to access the device
nodes will fail in EPERM. This whole issue is especially likely to
happen when libcamera is run at system init time.
To fix this, we first split DeviceEnumerator::addDevice() into three
methods:
- createDevice() to simply create the MediaDevice
- populateMediaDevice() to populate the MediaDevice
- addDevice() to pass the MediaDevice up to the pipeline handler
DeviceEnumeratorSysfs calls these methods in succession, similar to what
it did before when they were all together as addDevice().
DeviceEnumeratorUdev additionally keeps a map of MediaDevices to a list
of pending device nodes (plus some other auxillary maps), and a simple
list of orphan device nodes. If a v4l device node is ready and there
does not exist any MediaDevice node for it, then it goes to the orphan
list, otherwise it is initialized and removed from the pending list of
the corresponding MediaDevice in the dependency map. When a MediaDevice
is populated via DeviceEnumeratorUdev::populateMediaDevice(), it first
checks the orphan list to see if the device nodes it needs are there,
otherwise it tries to initialize the device nodes and if it fails, then
it adds the device nodes it wants to its list in the dependency map.
This allows MediaDevice instances to be created and initialized properly
with udev when v4l device nodes in the media graph may not be ready when
the MediaDevice is populated.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Report the list of available static metadata tags (characteristicKeys),
of supported controls (requestKeys) and produced metadata (resultKeys)
in the static metadata pack.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
According to the Android camera HALv3 documentation, the request
template metadata pack should not be modified after it is returned to
the camera stack from the HAL.
Currently, the same metadata pack is used for all types of template
request, without updating the capture intent there contained to match
the requested template type, as correctly reported by the
cros_camera_test test application.
In order to avoid modifying the single request template already returned
to the camera stack in order to update the capture intent it contains,
create a map that associates a dedicated template to each supported
capture type.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Simplify the implementation of metadata handling in the CameraDevice
class by using the new CameraMetadata helper class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The new CameraMetadata helper class wraps the Android camera_metadata_t
to simplify its usage.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use more opportune sizes, manually calculated, for the generated request
template.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two missing tags from the request template generated by the HAL.
The tags are reported as missing by the cros_camera_test tool.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove metadata tags wrongly added to the request template constructed
by the libcamera HAL.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use more opportune sizes for the static metadata pack, and for the
dynamic metadata sizes which where wrongly set to use the ones defined
for the static pack.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add all the static metadata keys part of the BC (backward compatible)
metadata group, which represent the minimum requirement for devices
supporting the LIMITED hardware level.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The error messages are copied from getControls() without being updated
for the set controls case, fix this.
Fixes: eb068f4e67eedacd ("libcamera: v4l2_device: Implement get and set controls")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Casting the return value of a function to (void) doesn't ignore the
unused result warning with gcc. Use a #pragma to fix this properly, to
fix compilation with _FORTIFY_SOURCE.
Fixes: df23ab95f3d7 ("libcamera: process: fix compilation on Chromium OS")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
M2M devices using MPLANE API will set the V4L2_CAP_VIDEO_M2M_MPLANE
capability flag.
Ensure that this is matched when checking for Multiplanar capabilities.
Fixes: 4f7625cca7ec ("libcamera: v4l2_videodevice: Support M2M devices")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraDevice class has a mechanism to cache static metadata, but
doesn't use it. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraManager class is not supposed to be instantiated multiple
times, which led to a singleton implementation. This requires a global
instance of the CameraManager, which is destroyed when the global
destructors are executed.
Relying on global instances causes issues with cleanup, as the order in
which the global destructors are run can't be controlled. In particular,
the Android camera HAL implementation ends up destroying the
CameraHalManager after the CameraManager, which leads to use-after-free
problems.
To solve this, remove the CameraManager::instance() method and make the
CameraManager class instantiable directly. Multiple instances are still
not allowed, and this is enforced by storing the instance pointer
internally to be checked when an instance is created.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager starts the libcamera CameraManager and creates
CameraProxy instances for each camera in the system. Clean up those
resources when the CameraHalManager terminates.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::close() method isn't used, remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager starts a thread that is never stopped. This leads
to the thread being destroyed while running, which causes a crash. Fix
this by stopping the thread and waiting for it to finish in the
destructor of the CameraHalManager.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraProxy is constructed with a Camera instance passed through a
shared pointer. It forwards it to the CameraDevice constructor, which
takes a reference used for the sole purpose of making an internal copy
of the shared pointer. Both constructors can thus take a const reference
instead of a value or a mutable reference. This optimises the
constructors slightly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Pass the CameraManager instance from the main() function to the
MainWindow class instead of accessing it through
CameraManager::instance(). This prepares for the removal of the
CameraManager::instance() method.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera manager is stopped both in the destructor of the MainWindow
class and in the main() function. This double stop isn't needed, remove
the former and keep the latter as the manager is started in the main()
function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Get the event dispatcher from the current thread instead of the camera
manager. This prepares for the removal of CameraManager::instance().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The device enumerator logs an error message when a media device is
removed while still in use. Add the device name to the message to help
debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Replace the manual implementation of asynchronous method invocation
through a custom message with Object::invokeMethod(). This simplifies
the thread RPC implementation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the Object class implements parent-child relationships, make it
possible to create EventNotifier and Timer instances with a parent by
adding a parent argument to their constructors.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a parent Object to Object instances, and track the parent-children
relationships. Children are bound to the same thread as their parent,
and moving an Object to a thread automatically moves all its children.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The Timer instances are registered with the event dispatcher instance of
the CameraManager. This makes it impossible to use timers in other
threads.
Fix this by inheriting from Object, which allows binding instances to a
thread, and register them with the event dispatcher for the thread they
are bound to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The EventNotifier instances are registered with the event dispatcher
instance of the CameraManager. This makes it impossible to use event
notifiers in other threads.
Fix this by inheriting from Object, which allows binding instances to a
thread, and register them with the event dispatcher for the thread they
are bound to.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraManager class uses the event dispatcher of the current thread.
This makes the CameraManager::eventDispatcher() and
CameraManager::setEventDispatcher() methods inconsistent, as they access
different event dispatcher instances depending on the calling thread.
Fix this by inheriting from the Object class, which binds the
CameraManager to a thread, and use the event dispatcher of the bound
thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Send a synchronous message to objects just before they get moved to a
new thread. This allows the object to perform any required processing.
EventNotifier and Timer objects will use this mechanism to move
themselves to the new thread's event disaptcher.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a helper invokeMethod() to the Object class that allows asynchrnous
invocation of any method of an Object instance. Asynchronous invocation
occurs when control returns to the event dispatcher of the target
object's thread, in the context of that thread.
To support this, generalise the SignalMessage implementation to support
automatic deletion of the associated BoundMethod, and rename the message
to InvokeMessage to reflect the more generic purpose.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To make the BoundMethod classes more generic, replace direct access to
private member from Signal classes with accessors or helper functions.
This allows removal of friend statements from the BoundMethod classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Move the Slot* classes to bound_method.{h,cpp} and rename them to
Bound*Method*. They will be reused to implement asynchronous method
invocation similar to cross-thread signal delivery.
This is only a move and rename, no functional changes are included.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Threads contain message queues and dispatch queued messages in their
event loop, in Thread::exec(). This mechanism prevents the main thread
from dispatching messages as it doesn't run Thread::exec().
Fix this by moving message dispatching from Thread::exec() to
EventDispatcher::processEvents().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
When moving an object to a different thread, messages posted for the
object are moved to the message queue of the new thread. Wake up the new
thread to ensure it processes the moved messages.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The CameraHalManager::getCameraInfo() validates the camera id it
receives from the camera service, and in doing so generates a compiler
error with gcc as the id is an unsigned integer and can never be
negative:
../src/android/camera_hal_manager.cpp: In member function ‘CameraProxy* CameraHalManager::open(unsigned int, const hw_module_t*)’:
../src/android/camera_hal_manager.cpp:89:9: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits]
if (id < 0 || id >= numCameras()) {
Fix it by removing the unneeded comparison.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
V4L2 M2M devices represent a V4L2Device with two queues: One output, and
one capture on a single device node.
Represent this by instantiating a V4L2VideoDevice for each queue type,
and preparing each device for its queue.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The "Opened device" statement occurs before the buffertype_ is set.
This causes all devices to report that they are [out] devices at open()
regardless of their type.
As the message operates in the past-tense, move the statement to the end
of the function when all work has been completed.
Fixes: 04d5be7f76fe ("libcamera: v4l2_device: Inherit from Loggable to print device node name")
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Provide a means for V4L2 device instances to set the fd_ explicitly.
This allows for V4L2Devices to operate when they must use an external
open() call.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraHalManager::getCameraInfo() validates the camera id it
receives from the camera service, and in doing so compares it with an
unsigned integer, generating a compiler error:
src/android/camera_hal_manager.cpp:121:9: error: comparison of integers of different signs: 'int' and 'unsigned int' [-Werror,-Wsign-compare]
if (id >= numCameras() || id < 0) {
~~ ^ ~~~~~~~~~~~~
Fix this by turning the id into an unsigned int, as camera ids can't be
negative. If a negative id is received from the camera service it will
be converted to a large unsigned integer that will fail the comparison
with numCameras().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add libcamera Android Camera HALv3 implementation.
The initial camera HAL implementation supports the LIMITED hardware
level and uses statically defined metadata and camera characteristics.
Add a build option named 'android' and adjust the build system to
selectively compile the Android camera HAL and link it against the
required Android libraries.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add SPDX tag to the android metadata library files licensed under
Apache-2.0.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Import the Android camera metadata library from the ChromiumOS build
system.
The camera metadata library has been copied from
https://chromium.googlesource.com/chromiumos/platform2
at revision 9e65ddd2c496e712f005ada9715decd2ff8e4a03
The original path in the Cros platform2/ repository is:
camera/android/libcamera_metadata/src
Create a new build target for the camera metadata library to
create a static library to link against libcamera.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Linux commit 85ab1aa1fac17bcd ("media: vimc: deb: fix default sink bayer
format") which is part of v5.2 changes the default media bus format for
the debayer subdevices. This leads to a -EPIPE error when trying to use
the raw capture video device nodes.
Fix this by moving the vimc pipeline to use the RGB/YUV Capture capture
video node. As a consequence of this change the scaler in the vimc
pipeline is used and a hard coded upscale of 3 is present in the video
pipeline. This limits the sizes exposed and accepted by libcamera to
multiples of 3.
Update the buffer import test case to match this new format constraint
by setting the resolution to 1920x1080, a resolution which works with
both vimc and vivid. With this new resolution the buffer import test
takes a bit more time to complete 60 buffers and it's runtime also needs
to be increased.
The raw capture video node still needs to be handled by the pipeline as
its format needs to be updated to allow the pipeline format validation
to pass.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
As the device pointers are deleted in the pipelines destructor it's not
a good idea to have them uninitialized.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
ISP output pad should be set to YUYV8_2X8 for non-bayer output format.
Bayer formats are not listed in RkISP1CameraConfiguration::validate(),
only non-bayer are listed, so we can set YUYV8_2X8 directly.
This will need to be changed if we add support for bayer output with
libcamera.
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPAModule::loadIPAModuleInfo() function includes a *data pointer
which is used as a null-pointer comparison in the error path with a
conditional statement of "if (ret || !data)".
The data variable is not initialised, and a single error path evaluates
this as "if (true || uninitialised)".
Whilst this error path does not incorrectly utilise the uninitialised
data, as the ret evaluates to true already, it does leave a statement
which includes an uninitialised variable.
Help the static analysers by initialising the data variable when it is
defined.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an error debug message when disassociating part of a process
execution context using unshare fails.
As this is currently used to isolate a child process which is
immediately terminated silently if unshare fails, add a debug printout
and propagate up the error code to make the failure more visible.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix an argument name mismatch between method declaration and
definition.
Reported-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow logging to syslog, or any given ostream, or to nowhere. The
logging API is updated to accomodate these new logging destinations.
LogMessage is modified to allow this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
