| Age | Commit message (Collapse) | Author |
|---|
|
CameraDevice::toPixelFormat() doesn't change the state of the
CameraDevice. Marks it a const function so that it can be called
in const functions.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
std::map::at() searches std::map by the given key. The commit
e1f9fdb8a5bd ("android: camera_device: Remove shadowing FrameBuffer
usage") uses it with 0 to intend to accessing the first element of the
map, but actually access the element whose key is nullptr. This causes
the crash because the map doesn't have the element with nullptr. This
fixes the issue by replacing the std::map::at() operation by
std::map::begin().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Updated commit message]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The last assignment of the ret variable in getControls() is not consumed
so it's unnecessary to set it. This likely originates from a similar
code flow in setControls() where the ret variable is later consumed.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The mutex_ stored in the CameraManager::Private class is used to protect
members that may need to be accessed from const functions. Make it
mutable to allow this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
If converter_->open() fails, the code deletes the converter_ but then
happily goes on, and at the very next lines will use converter_ to
connect the bufferReady signal.
Ensure the converter is only connected when successfully opened by
extending the conditional and connecting in an else scope instead.
Reported-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The method calls setFormat(), stores the return value, but then does not
do anything with the return value. I presume it is meant to fail and
return the error.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
During configure() we update the ScalerCropMaximum to the correct
value for this camera mode and work out the minimum crop size allowed
by the ISP.
Whenever a new ScalerCrop request is received we check it's valid and
apply it to the ISP V4L2 device. When the IPA returns its metadata to
us we add the ScalerCrop information, rescaled to sensor native
pixels.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
These functions are aimed at making it easier to calculate cropping
rectangles, particularly in order to implement digital zoom.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Initialise it to show we support its use, however, set it to all
zeroes to indicate that it's not meaningful yet.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The SensorCropMaximum camera property reports the location of that
part of the image sensor array that can be scaled to produce the
output images, given in native sensor pixels. It will normally change
when a new camera mode is selected, and can be used to implement
digital zoom.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The ScalerCrop control selects how much of the sensor's active pixel
array will be scaled to form the final output image. It can be used to
implement digital zoom.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Register the ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Add one entry and reserve in static metadata pack enough space to
support all the 2 available lens shading map modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 3
available color correction aberration modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 5
available noise reduction modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_REQUEST_PIPELINE_MAX_DEPTH static property
inspecting the value reported by the pipeline handler.
If the Camera does not report any suitable value, default the
static property to 2.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register controls for the IPU3 pipeline handler. The only supported
Camera control is currently the pipeline depth control.
Report the minimum and maximum values the pipeline handler supports for
the pipeline processing stages and report for each request the pipeline
depth describing the number of processing steps the frames went through.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The libcamera control definition schema includes a placeholder
maximum value for each enumeration of supported values.
As it is now possible to create ControlInfo from the list of enumerated
values, it is not necessary to generate the placeholder value anymore.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
For each Control that supports enumerated values generate an array
of ControlValue which contains the full list of valid values.
At the expense of a slight increase in memory occupation this change
allows the construction of the ControlInfo associated with a Control
from the values list, defaulting the minimum and maximum values
reported by the ControlInfo.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a new constructor to the ControlInfo class that allows creating
a class instance from the list of the control valid values with
an optional default one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera is in the process of defining its own set of controls
to enable applications to control the image capture process and
return information on the captured frames.
To temporarily close the gap in the Android camera HAL and support all
controls required in the LIMITED hardware level, define a set of Draft
controls whose values are taken from their Android definition, in order
to allow pipeline handlers to support Android.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Extend the control and property framework to support exposing draft
controls and properties in a scoped namespace.
The controls/properties themselves will retain the same ordering in the
relevant enum/id maps - but the access to any draft control will require
explicitly referencing through its' draft:: namespace prefix.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Added missing hunk in control_ids.cpp.in and changed subject]
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Following the reasoning of pass-by-value for libcamera::Span
parameters from 90c193f2a700("android: Modify Encoder interface") i.e.
they are easy to copy/move/construct, align the Exif parameter passing
to the encoder interface in this consistent way.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Drop "libcamera::" from functions' arguments for *.cpp files as they
have
using namespace libcamera;
directive in the beginning.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The base class of polymorphic classes is required to declare a
destructor. Several of these are empty, and can thus be declared as
defaulted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The MediaEntity, MediaLink and MediaPad classes don't need custom
destructors. For MediaEntity and MediaPad, the destructors clear a
vector embedded in the classes, which will be done by the default
destructor. For MediaLink, the destructor is already empty. Remove them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Initialize the CameraData properties with the properties exposed by the
sensor.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
|
|
The rkisp1 and simple pipeline handlers can fail to register any camera,
if initialization of all the detected cameras fail. In that case, they
still return success from their match function. As no camera gets
registered, the pipeline handler is immediately destroyed, releasing the
acquired media devices, and the camera manager immediately tries to
match the same pipeline handler with the same media device, causing an
endless loop.
Fix it by returning false from the match function if no camera gets
registered.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The buffer obtained for queuing to a raw stream shadows the buffer
passed in for the main view finder stream.
Prevent shadowing, and explicitly name the buffer as a separate variable.
Suggested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The parseValue function is given the optarg directly from the getopt
library, but the function retains the same name.
This causes an shadowed variable of the global optarg variable to be
present in the parseValue function. While this is not harmful, rename it
to work towards disabling shadowed variables.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Rename the internal member variables to use the post-fixed '_' member
variable naming style. This in turn ensures variable shadowing does not
occur in the member initializer list of the constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Do not warn on shadowed variables inside the metadata library,
which is directly imported without modifications.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
A FrameBuffer *buffer is used to obtain the 'first' buffer from a
request which is used purely to identify the timestamp from the
metadata in two locations.
Rather than keep the FrameBuffer instance around, which then causes
further usages of FrameBuffers to be shadowed, store the timestamp
locally.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the postfixed '_' member variable naming style for the
Camera3RequestDescriptor structure, which in turn ensures that variable
shadowing does not occur in the member initializer list of the
constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The function gauss_seidel2_SOR() makes use of a function scoped iterator
'i', for several loops, and has a precedence of re-using the function
scoped iterator declaration in the majority of cases, except the first
where it is declared in the loop scope before the function scope, and
later which aliases a new declaration.
Re-use the existing iterator variable for consistency, and to prevent
variable aliasing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The members free, and lastUsed were not following the libcamera coding
style, and were producing a shadowed parameter on the construction.
Rename them to be marked as member variables with the _ postfix
accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The FrameBuffer used to track any addition to the request in an
under-run event was shadowed against the returned buffer, being placed
back on the availableBuffers_ queue.
Rename the shadowed variable to be more explicit that it is a separate
Buffer.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove variable shadowing within the pipeline handler implementations.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Thread::wait() function creates a boolean flag 'finished' which
shadows the internal member signal of the same name.
Rename the boolean flag to prevent confusion and shadowing of the signal.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
CameraStream initializes several member variables in the
initializer list. Some of them are unchanged after. This makes
them constant. Especially, doing to |cameraDevice_| represents
CameraStream doesn't have the ownership of it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
PostProcessorJpeg doesn't have the ownership of CameraDevice given
in the constructor. To clarify it, this makes the member variable
constant.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In Encoder::encode(), the |source| argument doesn't have to be a
pointer. This replaces its type, const pointer, with const
reference as the latter is preferred to the former.
libcamera::Span is cheap to construct/copy/move. We should deal
with the type as pass-by-value parameter. Therefore this also
drops the const reference in the |destination| argument.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In PostProcessor::process(), the |source| argument doesn't have
to be a pointer. This replaces its type, const pointer, with
const reference as the latter is preferred to the former.
libcamera::Span is cheap to construct/copy/move. We should deal
with the type as pass-by-value parameter. Therefore this also
drops the const reference in the |destination| argument.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The libcamera namespace has been left undefined from the start. While
the documentation doesn't bring much added value, leaving it out
confuses the most recent doxygen master branch:
include/libcamera/transform.h:16: warning: Internal inconsistency: member Identity does not belong to any container!
include/libcamera/transform.h:17: warning: Internal inconsistency: member Rot0 does not belong to any container!
include/libcamera/transform.h:18: warning: Internal inconsistency: member HFlip does not belong to any container!
include/libcamera/transform.h:19: warning: Internal inconsistency: member VFlip does not belong to any container!
include/libcamera/transform.h:20: warning: Internal inconsistency: member HVFlip does not belong to any container!
include/libcamera/transform.h:21: warning: Internal inconsistency: member Rot180 does not belong to any container!
include/libcamera/transform.h:22: warning: Internal inconsistency: member Transpose does not belong to any container!
include/libcamera/transform.h:23: warning: Internal inconsistency: member Rot270 does not belong to any container!
include/libcamera/transform.h:24: warning: Internal inconsistency: member Rot90 does not belong to any container!
include/libcamera/transform.h:26: warning: Internal inconsistency: member Rot180Transpose does not belong to any container!
Document it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Make the whole code base consistent by placing the doxygen \file block
above the libcamera namespace opening. There's a single offender, and
two locations in which a white line is missing.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To be consistent with the other pipeline handlers that don't prefix
their IPA protocol header with ipa_, rename ipa_vimc.h to vimc.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is the unnecessary semicolon after ipaCreate() in
raspberrypi.cpp. This removes it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DEFINE_CATEGORY,
LOG_DECLARE_CATEGORY and REGISTER_PIPELINE_HANDLER are
unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DECLARE_CATEGORY and
LOG_DEFINE_CATEGORY are unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
