summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2023-01-29fixup! libcamera: imx8-isi: Break out YUV format selectionisi/raw_sensor_v2Jacopo Mondi
2023-01-29libcamera: imx8-isi: Remove mbusCode from formatsMap_Jacopo Mondi
Now that the media bus code selection procedure does not depend on the ISICameraConfiguration::formatsMap_ remove the association between PixelFormat supported by the ISI and the media bus code produced by the sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-29libcamera: imx8-isi: Split Bayer/YUV config generationJacopo Mondi
At generateConfiguration() a YUV/RGB pixel format is preferred for the StillCapture/VideoRecording/Viewfinder roles, but currently there are no guarantees in place that the sensor provides a non-Bayer bus format from which YUV/RGB can be generated. This makes the default configuration generated for those roles not to work if the sensor is a RAW-only one. To improve the situation split the configuration generation in two, one for YUV modes and one for Raw Bayer mode. StreamRoles assigned to a YUV mode will try to first generate a YUV configuration and then fallback to RAW if that's what the sensor can provide. As an additional requirement, for YUV streams, the generated mode has to be validated with the sensor to confirm the desired sizes can be generated. In order to test a format on the sensor introduce CameraSensor::tryFormat(). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-29libcamera: imx8-isi: Automatically select media bus codeJacopo Mondi
The ISICameraConfiguration::validate() function selects which media bus format to configure the sensor with based on the pixel format of the first configured stream using the media bus code associated to it in the formatsMap_ map. In order to remove the PixelFormamt-to-mbus-code association in formatsMap_ provide a wrapper function for the newly introduced getRawMediaBusFormat() and getYubMediaBusFormat() that automatically selects what media bus format to use based on the first stream pixel format. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-29libcamera: imx8-isi: Break out YUV format selectionJacopo Mondi
As per the RAW format selection, the media bus format selection procedure relies on the direct association of PixelFormat and media bus code in the formatsMap_ map. As the ISI can generate YUV and RGB formats from any non-Bayer media bus format, break out the YUV/RGB media bus format selection to a separate function. The newly introduced getYuvMediaBusFormat() tests a list of known-supported media bus formats against the list of media bus formats supported by the sensor and tries to prefer media bus codes with the same encoding as the requested PixelFormat. Use the newly introduced function in ISICameraConfiguration::validateYuv() to make sure the sensor can produce a YUV/RGB media bus format. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-21libcamera: imx8-isi: Break-out RAW format selectionJacopo Mondi
The current implementation of the ISI pipeline handler handles translation of PixelFormat to media bus formats from the sensor through a centralized map. As the criteria to select the correct media bus code depend if the output PixelFormat is a RAW Bayer format or not, start by splitting the RAW media bus code procedure selection out by adding a method for such purpose to the ISICameraData class. Add the function to the ISICameraData and not to the ISICameraConfiguration because: - The sensor is a property of CameraData - The same function will be re-used by the ISIPipelineHandler during CameraConfiguration generation. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-16libcamera: ipa_module: Relax ipaModuleInfo symbol size checkLaurent Pinchart
When an IPA module is loaded, the loadIPAModuleInfo() function validates the ipaModuleInfo structure. As part of that process, it checks that the ipaModuleInfo symbol size matches the expected structure size. This check breaks with clang and ASan, as the LLVM's address sanitizer implementation includes the redzone after the structure in the symbol size, currently growing it by 156 bytes (on x86-64). This causes all IPA modules to fail to load. Fix the problem by relaxing the size check to only ensure that the symbol is large enough to contain the structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-16py: cam.py: Fix duplicate metadata output if more than one streamDaniel Oakley
Currently, if there are multiple streams, the --metadata flag will print the metadata for each request multiple times. Moving the metadata print logic outside the stream for loop this will no longer occur. Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16libcamera: rkisp1: Re-sort includesJacopo Mondi
Comply with a checkstyle suggestion and separate inclusion directives. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-16libcamera: bayer_format: Expand documentationJacopo Mondi
The current documentation of the BayerFormat::transform() function reports examples on the Bayer components ordering transformation for horizontal flip (mirroring) but not for vertical flip or for the combination of the two. It is useful to complete the documentation to ease understanding of the transform() function on a sensor's Bayer pattern. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-10libcamera: base: utils: Support C libraries lacking locale supportLaurent Pinchart
Not all C libraries include support for locale objects (locale_t) and the strto*_l() family of functions. A notable example is uClibc that can be compiled with a hardcoded "C" locale. Compilation then fails as the newlocale(), freelocale() and strtod_l() functions are not defined. Fix the compilation breakage by checking for the availability of the locale_t type, and fall back to strtod() when the type isn't available. This may not lead to the correct result if support for locale objects isn't available and the locale isn't hardcoded to "C", but that is such a corner case that we will likely never encounter it. Fixes: e8ae254970cf ("libcamera: yaml_parser: Use C locale") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-01-10base: utils: Add and use strtod() helperLaurent Pinchart
The strtod() function is locale-dependent, and thus ill-suited to parse numbers coming from, for instance, YAML files. The YamlObject class uses strtod_l() to fix that issue, but that function is not available with all libc implementations. Correctly handling this problem is becoming out of scope for the YamlObject class. As a first step, add a strtod() helper function in the utils namespace that copies the implementation from YamlObject, and use it in YamlObject. The core issue will then be fixed in utils::strtod(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-05libcamera: Use C++17 [[fallthrough]] everywhereMatti Lehtimäki
Fixes build failure on some build environments. Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-01-03libcamera: yaml_parser: Use C localeKieran Bingham
When parsing configuration files on systems with differing locales, the use of strtod can produce different results, or in the worst case - fail to parse expected values. Fix this by using strtod_l() instead. To avoid constructing and destructing a locale_t instance for every use of strtod_l(), create an RAII class that wraps the locale_t and use it to provide a global "C" locale. Bug: https://bugs.libcamera.org/show_bug.cgi?id=174 Bug: https://github.com/raspberrypi/libcamera/issues/29 Reported-by: https://github.com/kralo Reported-by: Hannes Winkler <hanneswinkler2000@web.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-30qcam: Show string representation of pixel formatChristian Rauch
The raw pixel format in form of the fourcc integer is not easily readable. Use the string representation instead for easier debugging. Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-24gstreamer: Add bayer8 support to libcamerasrc elementPavel Machek
Bayer8 support is useful on hardware such as Librem 5, as GStreamer provides easy solution for debayering and display of the camera data. Add necessary glue to libcamerasrc element. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-24libcamera: Simple typo fixesPavel Machek
Fix various typos in the code base. Signed-off-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-22ipa: raspberrypi: Fix permissions on imx477_scientific.jsonLaurent Pinchart
The imx477_scientific.json file was added to the source tree with incorrect executable permission. Fix it. Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-22libcamera: camera_sensor: Add AR0521 sensor propertiesJacopo Mondi
Add an entry to the sensor properties for OnSemi AR0521. The chip manual list one additional test pattern "PN9 Link integrity test pattern" not supported by the mainline Linux driver. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-22ipa: camera_sensor_helper: Add AR0521 supportJacopo Mondi
Add support for OnSemi AR0521 5Mpx image sensor to libipa. The sensor analogue gain is implemented as a coarse and a fine factor, with the coarse gain being a power of two and the fine gain being a value in the [1.0, 2.0[ range. The mapping between gain codes and gain values is tabulated in the datasheet, and the table values are very close but not identical to the mathematical model. Compute the gain using the model to keep the code shorter, if this causes precision issues the calculation could be replaced with a table. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-12-19Expose the Request Sequence Number in Python BindingsMatthew Goodman
The python bindings are missing the ability to read the sequence number of the Request object from the public API. Expose the objects sequence number on the pybind11 surfaces to support applications reading this value. Signed-off-by: Matthew Goodman <matt@exclosure.io> [Kieran: Revised commit message] Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-19ipa: raspberrypi: Add a "scientific" tuning for the IMX477Naushir Patuck
Add a tuning file for the IMX477 more suited to scientific applications. The key differences from the original tuning file are: - Disable ALSC block completely - Pure rec709 gamma curve, and no contrast enhance - New CT curve and CCMs based on the illumination spectrum of a black body radiator up to about 3600 K and the CIE illuminant D for higher color temperatures. Further details on the changes can be found at: https://forums.raspberrypi.com/viewtopic.php?t=343449 All credit for these changes go to Dr. Rolf Henkel. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-16libcamera: Add todo comment in meson.build about switch to dependency('dl')Laurent Pinchart
The dlopen() & co. functions are provided by libdl on some systems, and but the C library on others. Starting from version 0.62.0, meson handles this behind the scenes when using dependency('dl'). Add a todo comment to remember we should replace the manual implementation with a dependency() call when updating to meson 0.62.0 or newer. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-14libcamera: pipeline: simple: converter: Use generic converter interfaceXavier Roumegue
Move the simple converter implementation to a generic V4L2 M2M class derived from the converter interface. This latter could be used by other pipeline implementations and as base class for customized V4L2 M2M converters. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-14libcamera: Declare generic converter interfaceXavier Roumegue
Declare a converter Abstract Base Class intended to provide generic interfaces to hardware offering size and format conversion services on streams. This is mainly based on the public interfaces of the current converter class implementation found in the simple pipeline handler. The main change is the introduction of loadConfiguration() function which can be used by the concrete implementation to load hardware specific runtime parameters defined by the application. Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-12libcamera: camera_sensor: Rectify test patterns listed for IMX519Umang Jain
The IMX519 driver reports ColorBars and ColorBarsFadeToGray but upon inspecting the test pattern modes via v4l2-ctl utility, these test patterns do not comply with MIPI CCS v1.1 (Section 10.1). Hence, omit from camera-sensor-properties database for now and add a comment for the same. Fixes: e3b26b4c4eb2 ("libcamera: camera_sensor: Add IMX519 sensor properties") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09libcamera: camera_sensor: Add IMX519 sensor propertiesUmang Jain
Add an entry for Arducam IMX519 sensor which has 1220x1220 pixel size and supports four test pattern modes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09ipa: rkisp1: Add additional default values to controlsRobert Mader
To make things easier for consumers. Related: https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1450 Signed-off-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09lc-compliance: simple_capture: Free Requests properlyPaul Elder
In the simple capture tests, in the capture functions, the Requests were auto-deallocated by the function going out of scope after the test completed. However, before the end of the scope, the Framebuffers that the Requests referred to were manually freed. Thus when the Requests were deallocated, they tried to cancel their Framebuffers, which involve setting the status to cancelled, which obviously causes a segfault because the Framebuffers had already been freed. Fix this by moving the list of Requests to a member variable and deallocating them before deallocating the Framebuffers at stop() time. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-09py: Support controls that use an array of RectanglesDavid Plowman
The Python bindings will now accept, or return, a list or tuple of libcamera.Rectangle objects for such controls. This had previously been omitted, but now we have, for example, the AfWindows control which requires this feature. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-08libcamera: controls: Change LensPosition units to dioptresDavid Plowman
The units for the LensPosition control, previously defined as being in units of 1 / hyperfocal_distance, are changed to 1 / distance (in metres). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-07android: Fix missing space in error messageJacopo Mondi
Add whitespace to correct the error message. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-11-30ipa: raspberrypi: imx477: Update tuning file for the latest camera modulesDavid Plowman
The latest camera modules have a very slightly different IR filter, so the tuning file is slightly revised to give best results with both old and new camera modules. The original tuning file is retained as imx477_v1.json in case anyone should wish to continue using it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: Fix bug in IPA frame drop logicNaushir Patuck
Fix a bug in the IPA frame dropping (for rate control) logic, where the metadata for the current context was copied from itself (i.e. a no-op), instead of being copied from the previous context. This bug does not occur in normal conditions, only when running with a low exposure time and unconstrained framerate, which happens in a particular picamera2 test. Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: ipa: raspberrypi: Use IPA cookiesNaushir Patuck
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to the pipeline handler through the setDelayedControls signal. This cookie is used to index the RPiController::Metadata object to be used for the frame. The IPA cookie is then returned from DelayedControls when the frame with the applied controls has been returned from the sensor, and eventually passed back to the IPA from the signalIspPrepare signal. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Use an array of RPiController::Metadata objectsNaushir Patuck
Allow the IPA to cycle through an array of RPiController::Metadata objects, one per prepare()/process() invocation, when running the controller algorithms. This allows historical metadata objects to be retained, and subsequently passed into the controller algorithms on future frames. At present, only a single index into this array is used. This change provides a route to fixing a problem with the AGC algorithm, where if a manual shutter/gain is requested, the algorithm does not currently retain any context of the total exposure that it has calculated. As a result, the wrong digital gain would be applied when the frame with the manual shutter/gain is processed by the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Add RPiController::Metadata::mergeCopyNaushir Patuck
Add a new member function to RPiController::Metadata that copies unique key/value pairs from one object to the other. This is different from std::map::merge that would remove the key/value pairs from the source object. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: delayed_controls: Add user cookie to DelayedControlsNaushir Patuck
Allow the caller to provide a cookie value to DelayedControls::reset and DelayedControls::push. This cookie value is returned from DelayedControls::get for the frame that has the control values applied to it. The cookie value is useful in tracking when a set of controls has been applied to a frame. In a subsequent commit, it will be used by the Raspberry Pi IPA to track the IPA context used when setting the control values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: delayed_controls: Template the ControlRingBuffer classNaushir Patuck
Convert ControlRingBuffer to a templated class to allow arbitrary ring buffer array types to be defined. Rename ControlRingBuffer to RingBuffer to indicate this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: Switch to RPi::DelayedControlsNaushir Patuck
Switch the Raspberry Pi pipeline handler to use the DelayedControls implementation in the RPi:: namespace. This will allow us to use Raspberry Pi specific API changes in future commits. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: raspberrypi: Fork DelayedControlsNaushir Patuck
Fork the libcamera::DelayedControls implementation in the RPi:: namespace, with the intention of updating the API for Raspberry Pi specific features. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-28libcamera: v4l2_device: Workaround faulty control menusKieran Bingham
Some UVC cameras have been identified that can provide V4L2 menu controls without any menu items. This leads to a segfault where we try to construct a ControlInfo(Span<>,default) with an empty span. Convert the v4l2ControlInfo and v4l2MenuControlInfo helper functions to return std::optional<ControlInfo> to be able to account in the caller if the control is valid, and only add acceptable controls to the supported control list. Menu controls without a list of menu items are no longer added as a valid control and a warning is logged. This also fixes a potential crash that would have occured in the unlikely event that a ctrl.minimum was set to less than 0. Bug: https://bugs.libcamera.org/show_bug.cgi?id=167 Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-28libcamera: framebuffer_allocator: Avoid double map lookupBarnabás Pőcze
Use `try_emplace()` on the map instead of `count()` and `operator[]` to avoid walking the tree twice. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-25cam: capture_script: Support parsing array controlsJacopo Mondi
Add support for parsing array controls to the cam capture script. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-25pipeline: rkisp1: Support raw Bayer capture configurationFlorian Sylvestre
Implement support for raw Bayer capture during configuration generation, validation and camera configuration. While at it, fix a typo in a comment. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Support raw Bayer capture at runtimeFlorian Sylvestre
Implement support for raw Bayer capture at runtime, from start() to stop(). Support of raw formats in the camera configuration is split to a subsequent change to ease review. In raw mode, the ISP is bypassed. There is no need to provide parameter buffers, and the ISP will not generate statistics. This requires multiple changes in the buffer handling: - The params and stats buffers don't need to be allocated, and the corresponding video nodes don't need to be started or stopped. - The IPA module fillParamsBuffer() operation must not be called in queueRequestDevice(). As a result, the IPA module thus doesn't emit the paramsBufferReady signal. The main and self path video buffers must thus be queued directly in queueRequestDevice(). - The tryCompleteRequest() function must not to wait until the params buffer has been dequeued. - When the frame buffer has been captured, the IPA module processStatsBuffer() operation must be called directly to fill request metadata. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Fix stream size validationLaurent Pinchart
Unlike RkISP1Path::generateConfiguration(), the validate() function doesn't take the camera sensor resolution into account but only considers the absolute minimum and maximum sizes supported by the ISP to validate the stream size. Fix it by using the same logic as when generating the configuration. Instead of passing the sensor resolution to the validate() function, pass the CameraSensor pointer to prepare for subsequent changes that will require access to more camera sensor data. While at it, update the generateConfiguration() function similarly for the same reason. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25pipeline: rkisp1: Query the driver for formatsPaul Elder
Query the driver for the output formats and sizes that it supports, instead of hardcoding them. This allows future-proofing for formats that are supported by some but not all versions of the driver. As the rkisp1 driver currently does not support VIDIOC_ENUM_FRAMESIZES, fallback to the hardcoded list of supported formats and framesizes. This feature will be added to the driver in parallel, though we cannot guarantee that users will have a new enough kernel for it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-25ipa: rkisp1: agc: Support raw captureLaurent Pinchart
Support raw capture by allowing manual control of the exposure time and analogue gain. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>