| Age | Commit message (Collapse) | Author |
|---|
|
The ISI can:
- produce any processed (YUV/RGB) stream format from a non-Raw media bus
format
- produce Bayer Raw stream formats from a Bayer RAW media bus format
At generateConfiguration() a YUV/RGB pixel format is preferred for the
StillCapture/VideoRecording/Viewfinder roles, but currently there are no
guarantees in place that the sensor provide a non-Bayer bus format from
which YUV/RGB an be generated.
This makes the default configuration generated for those roles not to
work if the sensor is a RAW-only one.
To improve the situation split the configuration generation in two:
- One for YUV modes
- One for Raw Bayer mode
StreamRoles assigned to a YUV mode will try to first generate a YUV
configuration and then fallback to RAW if that's what the sensor can
provide.
As an additional requirement, for YUV streams, the generated mode has to
be validated with the sensor to confirm the desired sizes can be
generated. In order to test a format on the sensor introduce
CameraSensor::tryFormat().
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
When an IPA module is loaded, the loadIPAModuleInfo() function validates
the ipaModuleInfo structure. As part of that process, it checks that the
ipaModuleInfo symbol size matches the expected structure size. This
check breaks with clang and ASan, as the LLVM's address sanitizer
implementation includes the redzone after the structure in the symbol
size, currently growing it by 156 bytes (on x86-64). This causes all IPA
modules to fail to load.
Fix the problem by relaxing the size check to only ensure that the
symbol is large enough to contain the structure.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Currently, if there are multiple streams, the --metadata flag will print
the metadata for each request multiple times.
Moving the metadata print logic outside the stream for loop this will no
longer occur.
Signed-off-by: Daniel Oakley <daniel.oakley@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Comply with a checkstyle suggestion and separate inclusion directives.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The current documentation of the BayerFormat::transform() function
reports examples on the Bayer components ordering transformation for
horizontal flip (mirroring) but not for vertical flip or for the
combination of the two.
It is useful to complete the documentation to ease understanding of the
transform() function on a sensor's Bayer pattern.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Not all C libraries include support for locale objects (locale_t) and
the strto*_l() family of functions. A notable example is uClibc that can
be compiled with a hardcoded "C" locale. Compilation then fails as the
newlocale(), freelocale() and strtod_l() functions are not defined.
Fix the compilation breakage by checking for the availability of the
locale_t type, and fall back to strtod() when the type isn't available.
This may not lead to the correct result if support for locale objects
isn't available and the locale isn't hardcoded to "C", but that is such
a corner case that we will likely never encounter it.
Fixes: e8ae254970cf ("libcamera: yaml_parser: Use C locale")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The strtod() function is locale-dependent, and thus ill-suited to parse
numbers coming from, for instance, YAML files. The YamlObject class uses
strtod_l() to fix that issue, but that function is not available with
all libc implementations. Correctly handling this problem is becoming
out of scope for the YamlObject class.
As a first step, add a strtod() helper function in the utils namespace
that copies the implementation from YamlObject, and use it in
YamlObject. The core issue will then be fixed in utils::strtod().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fixes build failure on some build environments.
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When parsing configuration files on systems with differing locales, the
use of strtod can produce different results, or in the worst case - fail
to parse expected values.
Fix this by using strtod_l() instead. To avoid constructing and
destructing a locale_t instance for every use of strtod_l(), create an
RAII class that wraps the locale_t and use it to provide a global "C"
locale.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=174
Bug: https://github.com/raspberrypi/libcamera/issues/29
Reported-by: https://github.com/kralo
Reported-by: Hannes Winkler <hanneswinkler2000@web.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The raw pixel format in form of the fourcc integer is not easily readable.
Use the string representation instead for easier debugging.
Signed-off-by: Christian Rauch <Rauch.Christian@gmx.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Bayer8 support is useful on hardware such as Librem 5, as GStreamer
provides easy solution for debayering and display of the camera
data. Add necessary glue to libcamerasrc element.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix various typos in the code base.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The imx477_scientific.json file was added to the source tree with
incorrect executable permission. Fix it.
Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry to the sensor properties for OnSemi AR0521.
The chip manual list one additional test pattern "PN9 Link integrity
test pattern" not supported by the mainline Linux driver.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for OnSemi AR0521 5Mpx image sensor to libipa.
The sensor analogue gain is implemented as a coarse and a fine factor,
with the coarse gain being a power of two and the fine gain being a
value in the [1.0, 2.0[ range. The mapping between gain codes and gain
values is tabulated in the datasheet, and the table values are very
close but not identical to the mathematical model. Compute the gain
using the model to keep the code shorter, if this causes precision
issues the calculation could be replaced with a table.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The python bindings are missing the ability to read the sequence number
of the Request object from the public API.
Expose the objects sequence number on the pybind11 surfaces to support
applications reading this value.
Signed-off-by: Matthew Goodman <matt@exclosure.io>
[Kieran: Revised commit message]
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a tuning file for the IMX477 more suited to scientific applications.
The key differences from the original tuning file are:
- Disable ALSC block completely
- Pure rec709 gamma curve, and no contrast enhance
- New CT curve and CCMs based on the illumination spectrum of a black body
radiator up to about 3600 K and the CIE illuminant D for higher color
temperatures.
Further details on the changes can be found at:
https://forums.raspberrypi.com/viewtopic.php?t=343449
All credit for these changes go to Dr. Rolf Henkel.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The dlopen() & co. functions are provided by libdl on some systems, and
but the C library on others. Starting from version 0.62.0, meson handles
this behind the scenes when using dependency('dl'). Add a todo comment
to remember we should replace the manual implementation with a
dependency() call when updating to meson 0.62.0 or newer.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Move the simple converter implementation to a generic V4L2 M2M class
derived from the converter interface. This latter could be used by
other pipeline implementations and as base class for customized V4L2 M2M
converters.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Declare a converter Abstract Base Class intended to provide generic
interfaces to hardware offering size and format conversion services on
streams. This is mainly based on the public interfaces of the current
converter class implementation found in the simple pipeline handler.
The main change is the introduction of loadConfiguration() function
which can be used by the concrete implementation to load hardware
specific runtime parameters defined by the application.
Signed-off-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The IMX519 driver reports ColorBars and ColorBarsFadeToGray but upon
inspecting the test pattern modes via v4l2-ctl utility, these test
patterns do not comply with MIPI CCS v1.1 (Section 10.1).
Hence, omit from camera-sensor-properties database for now and add a
comment for the same.
Fixes: e3b26b4c4eb2 ("libcamera: camera_sensor: Add IMX519 sensor properties")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add an entry for Arducam IMX519 sensor which has 1220x1220 pixel size
and supports four test pattern modes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To make things easier for consumers.
Related: https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/1450
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
In the simple capture tests, in the capture functions, the Requests were
auto-deallocated by the function going out of scope after the test
completed. However, before the end of the scope, the Framebuffers that
the Requests referred to were manually freed. Thus when the Requests
were deallocated, they tried to cancel their Framebuffers, which involve
setting the status to cancelled, which obviously causes a segfault
because the Framebuffers had already been freed.
Fix this by moving the list of Requests to a member variable and
deallocating them before deallocating the Framebuffers at stop() time.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Python bindings will now accept, or return, a list or tuple of
libcamera.Rectangle objects for such controls.
This had previously been omitted, but now we have, for example, the
AfWindows control which requires this feature.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The units for the LensPosition control, previously defined as being in
units of 1 / hyperfocal_distance, are changed to 1 / distance (in
metres).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add whitespace to correct the error message.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
The latest camera modules have a very slightly different IR filter, so
the tuning file is slightly revised to give best results with both old
and new camera modules.
The original tuning file is retained as imx477_v1.json in case anyone
should wish to continue using it.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix a bug in the IPA frame dropping (for rate control) logic, where the
metadata for the current context was copied from itself (i.e. a no-op), instead
of being copied from the previous context.
This bug does not occur in normal conditions, only when running with a low
exposure time and unconstrained framerate, which happens in a particular
picamera2 test.
Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The digital gain calculation uses a total exposure value computed with the
current AGC state. However, this is wrong in the case of manual shutter/gain
controls, as the total exposure value used must be the value computed when the
AGC sent the manual shutter/gain controls to the pipeline handler to action.
To fix this, the IPA now adds the historical AgcStatus structure to the metadata
(tagged with "agc.delayed_status"). This historical AgcStatus structure contains
the total exposure value calculated when the AGC sent the manual shutter/gain
controls to the pipeline handler.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to
the pipeline handler through the setDelayedControls signal. This cookie is used
to index the RPiController::Metadata object to be used for the frame.
The IPA cookie is then returned from DelayedControls when the frame with the
applied controls has been returned from the sensor, and eventually passed back
to the IPA from the signalIspPrepare signal.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow the IPA to cycle through an array of RPiController::Metadata objects, one
per prepare()/process() invocation, when running the controller algorithms. This
allows historical metadata objects to be retained, and subsequently passed into
the controller algorithms on future frames. At present, only a single index into
this array is used.
This change provides a route to fixing a problem with the AGC algorithm, where
if a manual shutter/gain is requested, the algorithm does not currently retain
any context of the total exposure that it has calculated. As a result, the
wrong digital gain would be applied when the frame with the manual shutter/gain
is processed by the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a new member function to RPiController::Metadata that copies unique
key/value pairs from one object to the other. This is different from
std::map::merge that would remove the key/value pairs from the source object.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Allow the caller to provide a cookie value to DelayedControls::reset and
DelayedControls::push. This cookie value is returned from DelayedControls::get
for the frame that has the control values applied to it.
The cookie value is useful in tracking when a set of controls has been applied
to a frame. In a subsequent commit, it will be used by the Raspberry Pi IPA to
track the IPA context used when setting the control values.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Convert ControlRingBuffer to a templated class to allow arbitrary ring buffer
array types to be defined. Rename ControlRingBuffer to RingBuffer to indicate
this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Switch the Raspberry Pi pipeline handler to use the DelayedControls
implementation in the RPi:: namespace. This will allow us to use Raspberry Pi
specific API changes in future commits.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fork the libcamera::DelayedControls implementation in the RPi:: namespace, with
the intention of updating the API for Raspberry Pi specific features.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Some UVC cameras have been identified that can provide V4L2 menu
controls without any menu items.
This leads to a segfault where we try to construct a
ControlInfo(Span<>,default) with an empty span.
Convert the v4l2ControlInfo and v4l2MenuControlInfo helper functions to
return std::optional<ControlInfo> to be able to account in the caller if
the control is valid, and only add acceptable controls to the supported
control list.
Menu controls without a list of menu items are no longer added as a
valid control and a warning is logged.
This also fixes a potential crash that would have occured in the
unlikely event that a ctrl.minimum was set to less than 0.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=167
Reported-by: Marian Buschsieweke <marian.buschsieweke@ovgu.de>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use `try_emplace()` on the map instead of `count()`
and `operator[]` to avoid walking the tree twice.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for parsing array controls to the cam capture script.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement support for raw Bayer capture during configuration generation,
validation and camera configuration.
While at it, fix a typo in a comment.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Implement support for raw Bayer capture at runtime, from start() to
stop(). Support of raw formats in the camera configuration is split to a
subsequent change to ease review.
In raw mode, the ISP is bypassed. There is no need to provide parameter
buffers, and the ISP will not generate statistics. This requires
multiple changes in the buffer handling:
- The params and stats buffers don't need to be allocated, and the
corresponding video nodes don't need to be started or stopped.
- The IPA module fillParamsBuffer() operation must not be called in
queueRequestDevice(). As a result, the IPA module thus doesn't emit
the paramsBufferReady signal. The main and self path video buffers
must thus be queued directly in queueRequestDevice().
- The tryCompleteRequest() function must not to wait until the params
buffer has been dequeued.
- When the frame buffer has been captured, the IPA module
processStatsBuffer() operation must be called directly to fill request
metadata.
Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Unlike RkISP1Path::generateConfiguration(), the validate() function
doesn't take the camera sensor resolution into account but only
considers the absolute minimum and maximum sizes supported by the ISP to
validate the stream size. Fix it by using the same logic as when
generating the configuration.
Instead of passing the sensor resolution to the validate() function,
pass the CameraSensor pointer to prepare for subsequent changes that
will require access to more camera sensor data. While at it, update the
generateConfiguration() function similarly for the same reason.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Query the driver for the output formats and sizes that it supports,
instead of hardcoding them. This allows future-proofing for formats that
are supported by some but not all versions of the driver.
As the rkisp1 driver currently does not support VIDIOC_ENUM_FRAMESIZES,
fallback to the hardcoded list of supported formats and framesizes. This
feature will be added to the driver in parallel, though we cannot
guarantee that users will have a new enough kernel for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Support raw capture by allowing manual control of the exposure time and
analogue gain.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add support for manual gain and exposure in the rkisp1 IPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The RkISP1 can capture raw frames by bypassing the ISP. In that mode,
the ISP will not produce statistics nor consume parameters. Most
algorithms will thus be unable to run, with one exception: the AGC will
still be able to configure the sensor exposure time and analog gain in
manual mode.
To prepare for this, add the ability to disable algorithms for the
duration of the capture session based on the camera configuration.
Individual algorithms report whether they support raw formats at
construction time, and the IPA module disables algorithms in configure()
based on the stream configurations.
Disabled algorithms are skipped during the capture session in the
processStatsBuffer() operation. As the ISP doesn't produce statistics,
don't try to access the stats buffer. There is no need for similar logic
in fillParamsBuffer() as that operation won't be called for raw capture.
All algorithms report not supporting raw capture by default. Raw support
in AGC will be added separately.
The feature is implemented in the RkISP1 module without any support from
libipa at this point to avoid designing a generic API based on a single
user. This may be changed in the future.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The StreamRole enum has enumerators such as 'Raw' that are too generic
to be in the global libcamera namespace. Turn it into a scoped enum to
avoid namespace clashes, and update users accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
libcamera prints stream role values in log messages. To be more
user-friendly, add a specialization of operator<<() to print the role
name as a string instead of a numerical value.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use vimc lens to test sensor's ability to discover ancillary lens.
Tested with the recent kernel patch for vimc lens:
https://lore.kernel.org/linux-media/20220415023855.2568366-1-yunkec@google.com/
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
