| Age | Commit message (Collapse) | Author |
|---|
|
All users of the Pwl::readYaml() function have been removed. The
function is not used, and is deprecated in favour of YamlObject::get().
Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that deserializing a Pwl object from YAML data is possible using the
YamlObject::get() function, replace all usage of Pwl::readYaml() to
prepare for its removal.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On Raspberry Pi 4
|
|
The AGC algorithm implements the AeEnable control at runtime. Move the
declaration of the control from the IPA module to the algorithm.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The sensor's maximum shutter speed is clamped by the maximum frame
duration specified in requests. If the requested maximum frame duration
is lower than the sensor's minimum shutter speed, the Agc::process()
function will pass a minimum value higher than the maximum to the
setLimits() function, resulting in an assertion failure. Fix it by
clamping the value to both the lower and the upper bounds.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The AGC active state and frame context both contain a variable named
maxShutterSpeed. The variable is used to limit the maximum shutter speed
when computing the exposure time and gains, but stores the maximum frame
duration, not clamped by the sensor's maximum shutter speed. Rename it
to maxFrameDuration.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The effective exposure value for each frame is split into shutter time,
analog gain and digital gain based on the AGC constraint mode and
exposure mode. The algorithm uses the modes from the active state, which
tracks the latest queued request, instead of the frame context, which
tracks the value of the controls requested for that frame. Fix it by
using the correct modes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The condition
if (std::pow(std::floor(root), 2) < factor)
predivider = static_cast<uint8_t>(std::ceil(root));
else
predivider = static_cast<uint8_t>(std::floor(root));
can only be false when the factor's root is an integer. In that case,
std::ceil(root) and std::floor(root) will be equal. The computation can
thus be simplified by always rounding up.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The ISP histogram parameters depends on the AE metering mode, but not on
the other AE algorithm controls. The exposure mode, constraints mode and
frame duration limits influence the behaviour of the algorithm, but not
the histogram computation parameters. Update the histogram parameters
only when AE metering mode changes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The Agc::computeHistogramPredivider() function doesn't need to modify
its size parameter. Make it const.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAFrameContext AGC documentation is lagging behind the
implementation and misses many variables. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The IPAActiveState AGC documentation is lagging behind the
implementation and misses many variables. Document them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
agc_mean_luminance.h uses utils::Duration, include the corresponding
header.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Enumerators in libcamera start with an upper case letter. Fix the
AgcConstraint::Bound enumerators.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
When no metering modes are specified in the tuning file, the AGC
initialzation fails with
[0:00:46.148508875] [209] ERROR RkISP1Agc agc.cpp:46 'AeMeteringMode' parameter not found in tuning file
which results in a camera initialization failure. Fix it by downgrading
the error into a warning, and continuing the AGC initialization with the
default metering mode.
Fixes: 35233938ee5d ("ipa: rkisp1: agc: Read histogram weights from tuning file")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add an operation for multiplying a matrix with a vector.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an algorithm module to the rkisp1 IPA for crosstalk correction.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a class to encapsulate the functionality of fetching a matrix based
on an integer key, and interpolating if there is no exact match. This is
expected to be used by both color correction matrices / crosstalk
correction as well as lens shading correction.
A cache is included only for exact matches of the key. The caller is
expected to decide the tolererance for rounding.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a class to represent a Matrix object and operations for adding
matrices, multipling a matrix by a scalar, and multiplying two matrices.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implement a specialization of the YamlObject::Getter structure to
support deserializing ipa::Pwl objects from YAML data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Pwl::Pwl(const std::vector<Point> &) constructor is inefficient as
it makes a copy of the given points vector. Add a second constructor
that takes an rvalue reference to a points vector to provide move
semantics.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a size() function to the Pwl class to return the number of points in
the piecewise linear function. This is useful, for instance, to validate
that all points added with append() or prepend() have been taken into
account.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Pwl::empty() function is a one-liner that can be easily optimized by
the compiler given the chance. Make it inline.
While at it, move the function documentation block to match the class
declaration order.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Suffix the Doxygen \param commands with the direction for all
parameters.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that YAML deserialization of Vector instances is supported through
YamlObject::get(), remove the Vector::readYaml() function. It turns out
not to be used.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Implement a specialization of the YamlObject::Getter structure to
support deserializing ipa::Vector objects from YAML data.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The YamlObject::get() function is a function template that gets fully
specialized for various types. This works fine for non-template types,
but specializing it for template types (e.g. a std::vector<U>) would
require partial template specialization, which C++ allows for classes
and variables but not functions.
To work around this problem, delegate the implementation to a new
YamlObject::Getter structure template, which will support partial
specialization.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Plumb controls for setting metering mode, exposure mode, constraint
mode, and frame duration limits. Also report them as available controls,
as well as in metadata.
While at it, add the missing #include for tuple, as a std::tie is used.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add support to the rkisp1 AGC to read histogram weights from the tuning
file. As controls for selecting the metering mode are not yet supported,
for now hardcode the matrix metering mode, which is the same as what the
AGC previously hardcoded.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
A few function parameters are marked with [[maybe_unused]] but are
actually used. Drop the attribute.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
convertContrast() and convertSaturation() are equal. Merge them into
one.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use a anonymous namespace instead of the static keyword to limity symbol
visibility.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
generateConfiguration() called validate() as a final step, causing the
stride and frameSize fields in StreamConfiguration to be filled in based
on the pixel format and width/height.
If a user application did not clear the stride field when setting up a
custom pixel format and width/height, the pipeline handler would respect
this stride and possibly overallocate buffers with a larger stride than
needed.
Fix this by removing the call to validate() completely, leaving the
stride and frameSize fields defaulting to 0. Removal of this call is
inconsequential as we hard-code a valid configuration for Raspberry Pi
platforms in generateConfiguration().
Bug: https://github.com/raspberrypi/libcamera/issues/138
Bug: https://github.com/raspberrypi/libcamera/issues/141
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This way the construction of the default value of type `T`
can be delayed until it is really needed, which is useful,
for example when `T == std::string` and the default value comes
from a string literal, as the default value string would always
be constructed otherwise, even if not needed.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All CameraSensorHelper subclasses define their member functions inline,
except for the CameraSensorHelperAr0521 class. Inline the gainCode() and
gain() functions to match the other classes.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The last sentence of the Gamma control description misses the final
period. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace one occurrence of the auto type qualifier with the explicit type
it represents to increase readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The values for the default gamma table are stored in an array that is
never modified. Mark it as static constexpr to facilitate optimizations.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Use the Doygen \copydoc command instead of duplicating documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
A few function parameters are marked with [[maybe_unused]] but are
actually used. Drop the attribute.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Fix a few assorted typographical issues:
- Sentences should end with a period.
- Paragraphs should be separated by a blank line, and there should be no
line break within a paragraph.
- Doxygen lists need a list marker ('-' or '*', use '-' here).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
To reduce code duplication, use the Pwl class from libipa. This also
removes the Pwl class from the Raspberry Pi IPA.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Copy the piecewise linear function code from Raspberry Pi,
and clean it up to align it more with the libcamera style.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a vector class to libipa. The original purpose of this is to replace
the floating-point Point class that Raspberry Pi used in their Pwl, as
that implementation of Point seemed more akin to a Vector than a Point.
This is added to libipa instead of to geometry.h to avoid public API
issues, plus this is not expected to be needed by applications.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Default control values were not applied to activeState. This had no negative
side effects in the first place, as the hardware defaults were used. The issue
became visible, when only one of the controls was set at runtime. In that case
the params for the other values were overwritten with 0 (reset value of
activeState) resulting in a black image.
While at it, only add the controls to the controls map if the algorithm is
contained in the tuning file.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Many build targets link with libipa and need libipa_includes. Group them
in a libipa_dep dependency object to simplify the users.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Let's make it conforming to the defined clang-format.
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a gamma algorithm for the rkisp1. It defaults to a gamma of 2.2 which
closely resembles sRGB. No seperate sRGB mode was implemented because the pwl
that models the gamma curve is so coarse that there is basically no difference
between srgb and gamma=2.2. The default can be overridden within the tuning
file or set at runtime using the gamma control.
The gamma algorithm is not enabled by default. This will be done in future
tuning file updates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
std::unordered_map::merge(source) has the side effect of actually moving items
from source to target. In this case the controls were removed from the source
maps on the first call to updateControls() and on the second call to
updateControls() they were missing in the source maps and therefore also
removed from the camera. Fix this by using insert() instead of merge(). This is
most likely cheaper than copy-contructing the source map.
Fixes: 4c5152843a2a ("ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminance")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
A camera gamma of roughly 2.2 is necessary to produce correct output
images on a standard monitor. Add a control for that.
Further information is available here:
https://en.wikipedia.org/wiki/SRGB
https://www.cambridgeincolour.com/tutorials/gamma-correction.htm
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
uClibc doesn't provide the macros defining parameters for the file
sealing API. Define them manually as a work around.
Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
