summaryrefslogtreecommitdiff
path: root/src/ipa
AgeCommit message (Collapse)Author
2021-05-24ipa: ipc: Rename CameraSensorInfo to IPACameraSensorInfoUmang Jain
This matches the naming convention for IPA IPC. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: mojom: Move CameraSensorInfo struct exclusively to IPA IPCUmang Jain
CameraSensorInfo structure is designed to pass in camera sensor related information from pipeline-handler to IPA. Since the pipeline-handler and IPA are connected via mojom IPC IPA interface, the interface itself provides a more suitable placement of CameraSensorInfo, instead of camera_sensor.h (which is a libcamera internal header ultimately, at this point). As CameraSensorInfo is already defined in core.mojom, it is just a matter of removing [skipHeader] tag to allow code-generation of CameraSensorInfo. Finally, update header paths to include CameraSensorInfo definition from IPA interfaces instead of "libcamera/internal/camera_sensor.h". Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11meson: Replace obselete join_paths() with '/' operatorUmang Jain
Since meson v0.49.0, join_paths() is equivalent to '/' hence, drop and replace it with '/' short-hand in meson files. This commit does not introduce any functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-11ipa: raspberrypi: Rate-limit the controller algorithmsNaushir Patuck
The controller algorithms currently run on every frame provided to the IPA by the pipeline handler. This may be undesirable for very fast fps operating modes where it could significantly increase the computation cycles (per unit time) without providing any significant changes to the IQ parameters. The added latencies could also cause dropped frames. Pass the FrameBuffer timestamp to the IPA through the controls. This timestamp will be used to rate-limit the controller algorithms to run with a minimum inter-frame time given by a compile time constant, currently set to 16.66ms. On startup, we don't rate-limit the algorithms until after the number of frames required for convergence. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add a Merge method to RPiController::MetadataNaushir Patuck
Add a new Merge method to the Metadata class. This will merge all unique key/value pairs from a source metadata map to the destination map. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add move/copy ctors and operators to Metadata classNaushir Patuck
Add a default, move and copy constructor as well as a move operator implementation RPiController::Metadata class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Switch to std::scoped_lock in the Metadata classNaushir Patuck
Replace std::lock_guard with std::scoped_lock. When locking a single mutex, both are functionally the same. When locking two mutexes in the operator= overload, the scoped_lock uses a deadlock avoidance algorithm to avoid deadlock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Reformat RPiController::Metadata class headerNaushir Patuck
Rearrange header includes to be in alphabetical order. Add whitespace to class definition to match libcamera coding guidelines. Fix a typo in the comment showing an example of scoped locks. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Store dropped frame count in a member variableNaushir Patuck
Store the number of dropped frames on startup in a member variable. This will be used in a subsequent change for rate limiting the controller algorithms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Use CamHelpers to generalise sensor embedded data parsingDavid Plowman
CamHelpers get virtual Prepare() and Process() methods, running just before and just after the ISP, just like Raspberry Pi Algorithms. The Prepare() method is able to parse the register dumps in embedded data buffers, and can be specialised to perform custom processing when necessary. The IPA itself only needs to call the new Prepare() and Process() methods. It must fill in the DeviceStatus from the controls first, in case the Prepare() method does not supply its own values. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Make sensor embedded data parser use Span classDavid Plowman
Improve MdParser::Parse() by taking a Span, pointing to const data that it should not change, as its input buffer. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-30src: meson: Define system pathsKieran Bingham
Define libcamera specific system paths for use within the library code base. These can be used to identify system configuration files and shared data. Also, make use of the new system path variables and map the ipa paths upon the libcamera system path, making use of the new shorter syntax for join_paths(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-27ipa: cam_helper: Correct a wrong choice of termSebastian Fricke
Sensors provide embedded data buffers and not metadata buffers, replace the incorrect term with the correct one. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-27ipa: cam_helper_imx219: Rework commentSebastian Fricke
Fix two typos and improve the sentence. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-26ipa: rkisp1: Move the IPA to the ipa::rkisp1 namespaceJean-Michel Hautbois
Simplify name-spacing of the RKISP1 components by placing it in the ipa::rkisp1 namespace directly. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-22ipa: ipu3: fix coverity issues in AWBJean-Michel Hautbois
The BNR configuration structure has inconsistent initialisation of two members. This was picked up by Coverity, after merge. While this code is still functional, fix them to be consistent with the other initialisations within the struct. Reported-by: Coverity CID=320056 Reported-by: Coverity CID=320058 Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: ipu3: Add support for IPU3 AEC/AGC algorithmJean-Michel Hautbois
Implement basic auto-exposure (AE) and auto-gain (AG) correction functions. The functions computeTargetExposure() and computeGain() are adapted from the Raspberry Pi AGC implementation to suit the IPU3 structures, and filtering is added to reduce visible stepsize when there are large exposure changes. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: ipu3: Add support for IPU3 AWB algorithmJean-Michel Hautbois
The IPA will locally modify the parameters before they are passed down to the ImgU. Use a local parameter object to give a reference to those algorithms. Inherit from the Algorithm class to implement basic AWB functions. The configure() call will set exposure and gain to their minimum value, so while AGC is not there, the frames will be dark. Once AWB is done, a color temperature is estimated and a default CCM matrix will be used (yet to be tuned). Implement a basic "grey-world" AWB algorithm just for demonstration purpose. The BDS output size is passed by the pipeline handler to the IPA. The best grid is then calculated to maximize the number of pixels taken into account in each cells. As commented in the source code, it can be improved, as it has (at least) one limitation: if a cell is big (say 128 pixels wide) and indicated as saturated, it won't be taken into account at all. Maybe is it possible to have a smaller one, at the cost of a few pixels to lose, in which case we can center the grid using the x_start and y_start parameters. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: ipu3: Add a histogram classJean-Michel Hautbois
This class will be used at least by AGC algorithm when quantiles are needed for example. It stores a cumulative frequency histogram. Going from cumulative frequency back to per-bin values is a single subtraction, while going the other way is a loop. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: Add a common interface for algorithm objectsJean-Michel Hautbois
In order to instantiate and use algorithms (AWB, AGC, etc.) there is a need for a common class to define mandatory methods. Instead of reinventing the wheel, reuse what Raspberry Pi has done and adapt to the minimum requirements expected. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-17ipa: ipu3: Move the IPA to the ipa::ipu3 namespaceKieran Bingham
Simplify name-spacing of the IPU3 components by placing it in the ipa::ipu3 namespace directly. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-15ipa: raspberrypi: cam_helper: Remove duplicate wordsSebastian Fricke
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-29ipa: raspberrypi: Fix typo and improve wordingSebastian Fricke
s/Return the validated limits out though metadata./ Return the validated limits via metadata./ Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28ipa: raspberrrypi: Remove duplicate commentSebastian Fricke
The exact same comment is used two times within 5 lines. Remove one of them as it is redundant. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-27ipa: rkisp1: Do not set controls during configureSebastian Fricke
Do not send events back to the pipeline handler, while the IPA thread has not been started. If information needs to be returned from configure it should be returned directly. Move the initial call to setControls() out of configure() and into the start() method which is called after the IPA running_ state is updated. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-24ipa: ipu3: Do not set controls during configureKieran Bingham
The configure operation is synchronous and should not send events back to the pipeline handler. If information needs to be returned from configure it should be handled through the interface directly. Move the initial call to setControls() out of configure() and into the start() method which is called after the IPA running_ state is updated. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::configure()Naushir Patuck
Rename ConfigInput to IPAConfig to be more consistent with the naming, and remove ConfigInput::op, as it is never used. Replace ConfigOutput with a ControlList type, as that is the only return type from ipa::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::start()Naushir Patuck
Separate out the in and out parameters in ipa::start() as they are not the same. This function now takes in a ControlList and returns out a struct StartConfig which holds a ControlList and drop frame count for the pipeline handler to action. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Remove unused member variableNaushir Patuck
The lastMode_ member variable is now unused, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Move the controller initialise to ipa::init()Naushir Patuck
The controller initialise is a one-off operation, so move it from ipa::configure() to ipa::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23pipeline: ipa: raspberrypi: Open the CamHelper on ipa::init()Naushir Patuck
Move the opening of the CamHelper from ipa::configure() to ipa::init(). This allows the pipeline handler to get the sensor specific parameters in pipeline_handler::match() where the ipa is initialised. Having the sensor parameters available earlier will allow selective use of the embedded data node in a future change. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-17libcamera: ipu3: Pass the BDS rectangle at IPA configure callJean-Michel Hautbois
The IPU3 IPA will need the BDS configuration when the AWB/AGC algorithm will be integrated. In order to do that, the configure() interface needs to be modified. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-14ipa: raspberrypi: Add support for imx327-based SE327M12 moduleDavid Plowman
This patch adds support for the Soho Enterprises SE327M12 module. The sensor is an imx327 which therefore uses the imx290 kernel driver and CamHelper. To use this module and camera tuning, place the following in the /boot/config.txt file: dtoverlay=imx290,clock-frequency=37125000 and then the existing imx290.json file must be over-written with se327m12.json Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-11ipa: rkisp1: Fail on init if hw revision is not RKISP1_V10Dafna Hirschfeld
In kernel 5.11 the rkisp1 uapi had changed to support different hardware revisions. Currently only revision 10 is supported by the rkisp1 IPA and therefore 'init' should fail if the revision is not 10. This changes depends on the kernel driver reporting the hardware revision, and thus requires the rkisp1 driver from v5.11 or newer. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-11ipa: rkisp1: Return error from IPA's configure method if it failsDafna Hirschfeld
The IPA of rkisp1 relies on some of the camera's controls. Therefore it can't work if those controls are not given. Return -EINVAL from 'configure' in that case. Also return error from the pipeline's 'configure' method if the IPA configure fails. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Use direct return value for configure()Paul Elder
Now that we support returning int directly in addition to other output parameters, improve the configure() function in the raspberrypi IPA interface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Rename vblank field in SensorConfig to vblankDelayDavid Plowman
The name vblankDelay is clearer. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Add support for imx290/imx327 sensorsDavid Plowman
imx290 and imx327 share the same kernel driver (imx290.c) and are therefore both recognised here as "imx290". We add the necessary CamHelper for these sensors, as well as a camera tuning file. The tuning was done with an Innomaker STARVIS IMX327LQR module. These have no IR cut filter so there is no proper colour tuning. However, you should obtain reasonable results for most modules using this sensor. Specific tunings for further modules can always be added subsequently. To use this sensor on the Raspberry Pi platform, please add dtoverlay=imx290,clock-frequency=74250000 into your /boot/config.txt file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Make CamHelpers return the frame delay for vblankingDavid Plowman
For some sensors (e.g. imx477) we need to update the vblanking on the frame before the exposure. For this reason the GetDelays method must also return the number of frame delays for the vblanking control. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-04ipa: raspberrypi: Remove MdParserRPiNaushir Patuck
With the recent change to pass a ControlList to the IPA with exposure and gain values used for a frame, RPiController::MdParserRPi is not needed any more. Remove all traces of it. The derived CamHelper objects now pass nullptr values for the parser to the base CamHelper class when sensors do not use metadata. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-04pipeline: ipa: raspberrypi: Pass exposure/gain values to IPA though controlsNaushir Patuck
When running with sensors that had no embedded data, the pipeline handler would fill a dummy embedded data buffer with gain/exposure values, and pass this buffer to the IPA together with the bayer buffer. The IPA would extract these values for use in the controller algorithms. Rework this logic entirely by having a new RPiCameraData::BayerFrame queue to replace the existing bayer queue. In addition to storing the FrameBuffer pointer, this also stores all the controls tracked by DelayedControls for that frame in a ControlList. This includes include exposure and gain values. On signalling RPi::IPA_EVENT_SIGNAL_ISP_PREPARE IPA event, the pipeline handler now passes this ControlList from the RPiCameraData::BayerFrame queue. The IPA now extracts the gain and exposure values from the ControlList instead of using RPiController::MdParserRPi to parse the embedded data buffer. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-03ipa: rkisp1: Update to kernel header changesLaurent Pinchart
The rkisp1 driver has received support for newer ISP versions, which changes its userspace API and ABI. Adapt to the API change. This requires kernel v5.11 or newer, or backporting the corresponding rkisp1 changes to older kernels. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Ignore invalid statistics zones correctlyDavid Plowman
Regions of the image where the statistics are not trusted should not be put in the zones_ list. This also means that the AWB may fail to run initially, so async_results_ needs to be initialised to some kind of default. Finally, the RGB zone structures can be zero-initialised safely now, the previous value of -1 would seem unusual. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Remove unused codeDavid Plowman
Some more code from pre-libcamera versions is removed. There is no functional change. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-23libcamera: Enable vimc pipeline handler when tests are enabledLaurent Pinchart
The addition of the new IPA IPC mechanism compiles pipeline-specific headers to define the interface between the pipeline and the IPA. This was optimised in 08ce394465b5 ("meson: ipa, proxy: Only build proxies for enabled pipelines") to only build for enabled pipelines, however the tests directly use the VIMC pipeline handler, and require it to be built. Create a local variable to store the requested pipelines from the user configuration and extend the enabled pipelines to ensure that VIMC is always enabled if the tests are also enabled Fixes: 08ce394465b5 ("meson: ipa, proxy: Only build proxies for enabled pipelines") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Sebastian Fricke<sebastian.fricke@posteo.net>
2021-02-19ipa: ipu3: Don't call SetControls for each frameJean-Michel Hautbois
Setting a default EXPOSURE and ANALOGUE_GAIN makes sense for the first frame but there is no need to force it for all frames. It will be called later by the 3A algorithms. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Rename IPA Interface namespace to ipa::RPiNaushir Patuck
Rename the IPA interface namespace to ipa::RPi for consistency with the libcamera::RPi namespace label. There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Tidy-ups after IPAInterface changesNaushir Patuck
This commit addresses a couple of tidy-ups after the IPAInterface rework: - Rename ConfigStaggeredWrite -> ConfigSensorParams - Rename setIsp -> setIspControls There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19ipa: raspberrypi: Do not require SDN (spatial denoise) algorithmDavid Plowman
A camera tuning is not required to load an SDN algorithm. In keeping with other controls, do not fail when a particular control was expecting this algorithm, just warn that it is not present. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-17ipa: raspberrypi: Fix exposure and gain delays for imx477Naushir Patuck
The exposure and gain delays for imx477 are both 2 frames. This error was not noticeable because the controller was using the embedded metadata to get the exposure and gain values for the frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>