summaryrefslogtreecommitdiff
path: root/src/ipa/rkisp1
AgeCommit message (Collapse)Author
2022-11-23ipa: rkisp1: Fail hard on empty CameraSensorInfoJacopo Mondi
The RkISP1 pipeline and IPA module allows for the CameraSensorInfo to be empty, probably to accommodate some sensor used in a test platform that does not provide the mandatory libcamera requirements. As the \todo item in the IPA reports, there is a possibility that the received CameraSensorInfo is empty and it should be checked before accessing it, but currently such requirement is not enforced in the code. This allows to assume all the test platforms in use have now successfully moved their sensor driver to comply with the minimum requirements and provide a populated CameraSensorInfo to the IPA. As the safety check is not enforced, and as we don't want to allow faulty sensors to send empty CameraSensorInfo to the IPA, remove the \todo item in the IPA and fail hard in the pipeline handler if the sensor does not comply with libcamera requirements. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-23ipa: rkisp1: Use IPAConfig in IPA::configure()Jacopo Mondi
The RkISP1 implementation of IPA::configure() still uses the legacy interface where sensor controls (and eventually lens controls) are passed from the pipeline handler to the IPA in a map. Since the introduction of mojom-based IPA interface definition, it is possible to define custom data types and use them in the interface definition between the pipeline handler and the IPA. Align the RkISP1 IPA::configure() implementation with the one in the IPU3 IPA module by using a custom data type instead of relying on a map to pass controls to the IPA. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-23libcamera: Move IPA sensor controls validation to CameraSensorJacopo Mondi
The CameraSensor class validates that the sensor driver in use supports the controls required for IPA modules to work correctly. For in-tree IPA modules, whose pipeline handlers already use CameraSensor there's no need to validate such controls again. Remove controls validation from the IPU3 and RkISP1 IPA modules and rely on CameraSensor doing that at initialization time. The list of mandatory controls is expanded to add V4L2_CID_ANALOGUE_GAIN without which IPA modules cannot function. The new requirement only applies to RAW sensors, platforms like UVC and Simple are not impacted by this change. While at it, expand the sensor driver requirements documentation to include V4L2_ANALOGUE_GAIN in the list of mandatory controls a sensor driver has to support. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-12ipa: rkisp1: Add rudimentary LSC tables for imx219Paul Elder
Add rudimentary LSC tables for imx219. These were generated with the rkisp1 tuning script from libtuning [1], using an imx8mp (debix) and a white computer monitor, at only a single color temperature of 5800. [1] https://lists.libcamera.org/pipermail/libcamera-devel/2022-October/035017.html Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-12ipa: rkisp1: Take into account color temperature during LSC algorithmFlorian Sylvestre
Add coefficients sets in the YAML tuning file to allow using different set depending of the image color temperature (provided by AWB algorithm). During processing, LSC algorithm computes coefficients by doing a linear interpolation between the two closer set. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-09ipa: rkisp1: Move shutter speed and analogue gain limits from agc to sensorLaurent Pinchart
The limits for the shutter speed and analogue gain are stored in IPASessionConfiguration::agc. While they're related to the AGC, they are properties of the sensor, and are stored in the session configuration by the IPA module, not the AGC algorithm. Move them to the IPASessionConfiguration::sensor structure where they belong. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-09ipa: Sort algorithm operations based on calling orderLaurent Pinchart
Reorder functions in the base ipa::Algorithm and its derived classes to match the calling order: queueRequest(), prepare() and process(). This makes the code flow easier to read. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-11-03ipa: rkisp1: Compute LSC algorithm parameter during configureFlorian Sylvestre
LSC gradient parameters are currently computed during prepare() phase. Because these parameters can be computed only one time and stay constant for each frame after, move the computation to the configure() function. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
2022-10-24ipa: rkisp1: Fill AGC and AWB metadataLaurent Pinchart
Fill the frame metadata in the AGC and AWB algorithm's prepare() function. Additional metadata for other algorithms will be addressed later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-24ipa: Pass metadata to Algorithm::process() functionLaurent Pinchart
Extend the Algorithm::process() function with a metadata control list, to be filled by individual algorithms with frame metadata. Update the rkisp1 and ipu3 IPA modules accordingly, and drop the dead code in the IPARkISP1::prepareMetadata() function while at it. This only creates the infrastructure, filling metadata in individual algorithms will be handled separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-19ipa: rkisp1: Downgrade sensor controls range message to DebugLaurent Pinchart
There's no need to print the exposure and gain control ranges as an Info message. Downgrade it to Debug. While at it, print the ranges using the "[min, max]" syntax. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-18camera_sensor: Add minimum and maximum line length to IPACameraSensorInfoNaushir Patuck
Add fields for minimum and maximum line length (in units of pixels) to the IPACameraSensorInfo structure. This replaces the existing lineLength field. Update the ipu3, raspberrypi and rkisp1 IPAs to use IPACameraSensorInfo::minLineLength instead of IPACameraSensorInfo::lineLength, as logically we will always want to use the fastest sensor readout by default. Since the IPAs now use minLineLength for their calculations, set the starting value of the V4L2_CID_HBLANK control to its minimum in CameraSensor::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-10ipa: rkisp1: Drop use of utils::defoptLaurent Pinchart
utils::defopt causes compilation issues on gcc 8.0.0 to gcc 8.3.0, likely due to bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86521 that was fixed in gcc 8.4.0. gcc 8.3.0 may be considered old (libcamera requires gcc-8 or newer), but it is shipped by Debian 10 that has LTS support until mid-2024. As no workaround has been found to fix compilation on gcc 8.3.0 while still retaining the functionality of utils::defopt, stop using it in the RkISP1 IPA module. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-07ipa: camera_sensor_helper: Implement factories through class templatesLaurent Pinchart
The REGISTER_CAMERA_SENSOR_HELPER() macro defines a class type that inherits from the CameraSensorHelperFactory class, and implements a constructor and createInstance() function. Replace the code generation through macro with the C++ equivalent, a class template, as done by the Algorithm factory. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-10-01ipa: rkisp1: Remove initialized_ flags from algorithmsLaurent Pinchart
Multiple algorithms have an initialized_ flag that they set to true at the end of the init() function, and check at the beginning of prepare() to skip preparation. This serves no real purpose, as the flag can only be false if init() fails, in which case the IPA module initialization as a whole will fail. Drop the initialized_ flags. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-09-28ipa: rkisp1: awb: Remove bias from gain calculationLaurent Pinchart
The red and blue gains are computed by dividing the green mean by the red and blue means respectively. An offset of 1 is added to the dividers to avoid divisions by zero. This introduces a bias in the gain values. Fix it by clamping the divisors to a minimum of 1.0 instead of adding an offset. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Freeze AWB when means are too smallLaurent Pinchart
When the RGB means are too small, gains and color temperature can't be meaningfully calculated. Freeze the AWB in that case, using the previously calculated values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Clamp gains to prevent divisions by zeroLaurent Pinchart
The gain values are currently clamped to the range [0.0, 3.996] used by the hardware. A zero value makes little sense, as it would completely remove the contribution of the corresponding color channel from the AWB accumulators, but worse, would lead to divisions by zero when calculating the raw means in subsequent iterations. Prevent this by setting the minimum gain value to 1/256. While at it, clamp the gain values before filtering them, to improve the stability of the control loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Prevent RGB means from being negativeLaurent Pinchart
Due to hardware rounding errors in the YCbCr means, the calculated RGB means may be negative. This would lead to negative gains, messing up calculation. Prevent this by clamping the means to positive values. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Log means, gains and temperature in debug messageLaurent Pinchart
Extend the debug message in Awb::process() to log the means and color temperature in addition to the gains. This is useful for debugging the algorithm behaviour. While at it, set the showpoint flag to print a fixed number of digits after the decimal point, making logs more readable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Add support for RGB meansQuentin Schulz
RkISP actually supports two modes for color means, RGB and YCbCr. The variables where the means are stored are identically named regardless of the color means mode that's been selected. Since the gains are computed in RGB mode, a conversion needs to be done when the mode is YCbCr, which is unnecessary when RGB mode is selected. This adds support for RGB means mode too, by checking at runtime which mode is selected at a given time. The default is still set to YCbCr mode for now. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Store color temperature as an integerLaurent Pinchart
The color temperature doesn't need floating point precision, and is calculated by Awb::estimateCCT() as an unsigned integer. Store it with the same data type in the frame context. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Use frame context to fix gains calculationsLaurent Pinchart
The AWB statistics are computed after the ISP applies the colour gains. This means that the red, green and blue means do not match the data coming directly from the sensor, but are multiplied by the colour gains that were used for the frame on which the statistics have been computed. The AWB algorithm needs to take this into account when calculating the colour gains for the next frame. Do so by dividing the means by the gains that were applied to the frame, retrieved from the frame context. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Document the active state and frame contextLaurent Pinchart
Now that data used by algorithms has been partitioned between the active state and frame context, we have a better view of the role of each of those structures. Document them appropriately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: filter: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: dpf: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: cproc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state, to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The latter is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: awb: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state and frame context to store data in the right place. The active state stores two distinct categories of information: - The consolidated value of all algorithm controls. Requests passed to the queueRequest() function store values for controls that the application wants to modify for that particular frame, and the queueRequest() function updates the active state with those values. The active state thus contains a consolidated view of the value of all controls handled by the algorithm. - The value of parameters computed by the algorithm when running in auto mode. Algorithms running in auto mode compute new parameters every time statistics buffers are received (either synchronously, or possibly in a background thread). The latest computed value of those parameters is stored in the active state in the process() function. The frame context also stores two categories of information: - The value of the controls to be applied to the frame. These values are typically set in the queueRequest() function, from the consolidated control values stored in the active state. The frame context thus stores values for all controls related to the algorithm, not limited to the controls specified in the corresponding request, but consolidated from all requests that have been queued so far. For controls that can be specified manually or computed by the algorithm depending on the operation mode (such as the colour gains), the control value will be stored in the frame context in queueRequest() only when operating in manual mode. When operating in auto mode, the values are computed by the algorithm and stored in the frame context in prepare(), just before being stored in the ISP parameters buffer. The queueRequest() function can also store ancillary data in the frame context, such as flags to indicate if (and what) control values have changed compared to the previous request. - Status information computed by the algorithm for a frame. For instance, the colour temperature estimated by the algorithm from ISP statistics calculated on a frame is stored in the frame context for that frame in the process() function. The active state and frame context thus both contain identical members for most control values, but store values that have a different meaning. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-09-28ipa: rkisp1: agc: Store per-frame information in frame contextLaurent Pinchart
Rework the algorithm's usage of the active state to store the value of controls for the last queued request in the queueRequest() function, and store a copy of the values in the corresponding frame context. The frame context is used in the prepare() function to populate the ISP parameters with values corresponding to the right frame. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Use frame number passed to Algorithm::prepare()Laurent Pinchart
Now that the Algorithm::prepare() function takes a frame number, we can use it to replace the IPAActiveState::frameCount member. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Convert to use the FCQueueKieran Bingham
Establish a queue of FrameContexts using the new FCQueue and use it to supply the FrameContext to the algorithms. The algorithms on the RKISP1 do not use this yet themselves, but are able to do so after the introduction of this patch. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-09-28ipa: rkisp1: Use base FrameContext classLaurent Pinchart
Inherit from the base FrameContext class in the RkISP1 IPAFrameContext. As the IPAFrameContext is currently unused, this change is a no-op, but it prepares the RkISP1 IPA module for frame context queue support. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Rename frameContext to activeStateKieran Bingham
The RkISP1 IPA module creates a single instance of its IPAFrameContext structure, effectively using it more as an active state than a per-frame context. To prepare for the introduction of a real per-frame context, move all the members of the IPAFrameContext structure to a new IPAActiveState structure. The IPAFrameContext becomes effectively unused at runtime, and will be populated back with per-frame data after converting the RkISP1 IPA module to using a frame context queue. The IPAActiveState structure will slowly morph into a different entity as individual algorithm get later ported to the frame context API. While at it, fix a typo in the documentation of the Agc::computeExposure() function that incorrectly refers to the frame context instead of the global context. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Sort documentation of the IPA contextLaurent Pinchart
The documentation of the IPA context structures is separate from the documentation of the structure members. Sort the documentation block to group members with their structure. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: rkisp1: Remove unused class memberJacopo Mondi
The "autoExposure" class member is not used. Remove it. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-09-28ipa: libipa: algorithm: queueRequest(): Pass frame contextKieran Bingham
IPA modules have access to incoming Request's controls list and need to store them in the frame context at queueRequest() time. Pass the frame context to the Algorithm::queueRequest() function. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-09-28ipa: libipa: algorithm: process(): Pass frame numberKieran Bingham
Pass the frame number of the current frame being processed. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-28ipa: libipa: algorithm: prepare(): Pass frame and frame ContextKieran Bingham
Pass the current frame number, and the current FrameContext for calls to prepare. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-09-27ipa: libipa: Pass a reference instead of pointer to Algorithm::process()Laurent Pinchart
Frame contexts will become the core component of IPA modules, always available to functions of the algorithms. To indicate and prepare for this, turn the frame context pointer passed to Algorithm::process() into a reference. The RkISP1 IPA module doesn't use frame contexts yet, so pass a dummy context for now. While at it, drop an unneeded [[maybe_unused]] from Agc::process() and add a missing parameter documentation for the frameContext argument to Awb::process(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-08-30ipa: rkisp1: lsc: Use double instead of float to accumulate vector of doublesMarvin Schmidt
clang-tidy's bugprone-fold-init-type check warns about this: > ../src/ipa/rkisp1/algorithms/lsc.cpp:61:14: warning: folding type 'double' into type 'float' might result in loss of precision [bugprone-fold-init-type] > float sum = std::accumulate(sizes.begin(), sizes.end(), 0.0f); > ^ Fixes: b3e96411d8a9 ("ipa: rkisp1: Add support of Lens Shading Correction control") Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-30ipa: rkisp1: Remove redundant call of std::string::c_str()Marvin Schmidt
The constructor of libcamera::File takes a const reference to a std::string and clang-tidy's readability-redundant-string-cstr check warns about it: > ../src/ipa/rkisp1/rkisp1.cpp:147:12: warning: redundant call to 'c_str' [readability-redundant-string-cstr] > File file(settings.configurationFile.c_str()); > ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > settings.configurationFile Signed-off-by: Marvin Schmidt <marvin.schmidt1987@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-21ipa: rkisp1: Add support of Denoise Pre-Filter controlFlorian Sylvestre
The denoise pre-filter algorithm is a bilateral filter which combines a range filter and a domain filter. The denoise pre-filter is applied before demosaicing. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for LSC algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the lsc struct in IPASessionConfiguration which indicates if the LSC hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-21ipa: rkisp1: Add enable field for AWB algorithm in IPA contextFlorian Sylvestre
Add an enable variable in the awb struct in IPASessionConfiguration which indicates if the AWB hardware module is enabled. This will allow other algorithms to retrieve this information. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-08-19ipa: rkisp1: Add manual color gainsPaul Elder
Add support for manually controlling the color gains on the rkisp1 IPA. To that end, add and plumb the AwbEnable and ColourGains controls. As per-frame controls aren't supported yet in the rkisp1 IPA, simply apply and perform checks on the controls immediately. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-09ipa: rkisp1: Remove unused algorithms includes from rkisp1.cppDaniel Semkowicz
Algorithms are now created dynamically basing on tuning file, so there is no longer dependency on specific algorithms. Signed-off-by: Daniel Semkowicz <dse@thaumatec.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-08-04ipa: rkisp1: Use YAML 1.1 for tuning data filesLaurent Pinchart
YAML 1.2 support has been added in libyaml in version 0.2.3. Debian stable ships version 0.2.2 of libyaml, which causes parse errors of the tuning tuning data files due to the YAML 1.2 directive at the beginning. As we don't use any feature of YAML 1.2, downgrade the data files to YAML 1.1. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-08-04pipeline: rkisp1: Move ControlInfoMap to IPA moduleLaurent Pinchart
Currently the pipeline handler advertises controls handled by the IPA from a ControlInfoMap it manually constructs. This is wrong, as the IPA module is the component that knows what controls it supports. Fix this by moving the ControlInfoMap construction to the IPA module, and pass it to the pipeline handler as a return value from the IPA init() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Florian Sylvestre <fsylvestre@baylibre.com>
2022-07-28ipa: rkisp1: Add support of ColorProcessing controlFlorian Sylvestre
Add ColorProcessing algorithm that is in charge to manage brightness, contrast and saturation controls. These controls are currently based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-28ipa: rkisp1: Add support of Filter controlFlorian Sylvestre
Denoise and Sharpness filters will be applied by RkISP1 during the demosaicing step. The denoise filter is responsible for removing noise from the image, while the sharpness filter will enhance its acutance. Add filter algorithm with denoise and sharpness values based on user controls. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>