| Age | Commit message (Collapse) | Author |
|---|
|
We add a GetConvergenceFrames method to the AwbAlgorithm class which
can be called when the AWB is started from scratch. It suggests how
many frames should be dropped before displaying any (while the AWB
converges).
The Raspberry Pi specific implementation makes this customisable from
the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
We add a GetConvergenceFrames method to the AgcAlgorithm class which
can be called when the AGC is started from scratch. It suggests how
many frames should be dropped before displaying any (while the AGC
converges).
The Raspberry Pi specific implementation makes this customisable from
the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
configure
The number of frames to drop (not display) is passed back now from the
start method, not configure. This means applications have a chance to
set fixed exposure/gain before starting the camera and this can affect
the frame drop count that is returned.
Note how we need to be able to tell the very first time we start the
camera from subsequent restarts, hence addition of the "firstStart_"
flag.
Both the IPA implementation file and the pipeline handler need
matching modifications.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Forward any controls passed into the pipeline handler to the IPA.
The IPA then sets up the Raspberry Pi controller with these settings
appropriately, and passes back any V4L2 sensor controls that need
to be applied.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This change allows controls passed into PipelineHandler::start to be
forwarded onto IPAInterface::start(). We also add a return channel if the
pipeline handler must action any of these controls, e.g. setting the
analogue gain or shutter speed in the sensor device.
The IPA interface wrapper isn't addressed as it will soon be replaced by
a new mechanism to handle IPC.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the IPA fails during configuration, return an error flag to the
pipeline handler and fail the use case gracefully.
At present, the IPA configuration can fail for the following reasons:
- The sensor is not recognised, and fails to open a CamHelper object.
- The pipeline handler did not pass in controls for the ISP and sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The exposure times in the exposure modes were causing AGC oscillations
because the algorithm was demanding long unachievable exposure times
but, without working sensor metadata, thought it was getting them when
actually it was not. We fix it by making the exposure profile request
only achievable exposure times, as we do for the ov5647 tuning.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
AE/AGC "disabled" is now handled better by the algorithm for itself,
so it no longer needs to be "resumed" before setting fixed shutter or
gain values.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
AGC, when paused, sets the last exposure/gain it wrote to be its
"fixed" values and will therefore continue to return them. When
resumed, we clear them so that both will float again.
This approach is better because AGC can be paused and we can
subsequently change (for example) the exposure and the gain won't
float again.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When both gain and shutter have been directly specified, do not filter
slowly towards those target values, but adopt them immediately. This
should match user expectations better.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Previously we required that the sensor absolutely reaches the target
exposure, but this can fail if frame rates or analogue gains are
limited. Instead insist only that we get several frames with the same
exposure time, analogue gain and that the algorithm's target exposure
hasn't changed either.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
partly saturated images
When parts of an image saturate then the image brightness no longer
increases linearly with increased exposure/gain. Having calculated a
linear gain value it's better then to try it, allowing for saturating
regions, and if necessary increase the gain some more. We repeat this
several times.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
constructor
Use memset in the constructor for embedded structures, it is tidier
and initialises everything. We use the initialiser list for other
members.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
SwitchMode
When an application has specified fixed exposure time and/or gain they
must be programmed into the sensor immediately, even before the sensor
has been started. For this to happen they must be written into the
image metadata when the SwitchMode method is invoked.
We also make the default exposure/gain, when nothing has been set,
customisable in the tuning file.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Awb class now implements a SwitchMode method which outputs its
AwbStatus for other algorithms to read, should they be interested.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Introduce a function to fetch the AwbStatus (fetchAwbStatus), and call
it unconditionally at the top of Prepare so that both Prepare and
Process know thereafter that it's been done.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Previously the calculation computed Y for each region before returning
the weighted average, which "baked in" the over-importance of small
statistics regions. The revised calculation will treat all pixels
equally when the region weights are the same, making it easier to
use. With the previous scheme, proper "average" metering was difficult
to implement.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The method formerly known as divvyupExposure is given a more
understandable name.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On the libcamera/VC4 platform the AGC Prepare/Process methods, and any
changes to the AGC settings, run synchronously - so a number of
mutexes and copies are unnecessary and can be removed.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace Raspberry Pi debug with libcamera debug.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The names have to match for the setting to work. Use the libcamera
terminology for consistency (even though it touches more files).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Support the 'cloudy' AWB mode which was left out when the AwbModeTable
was introduced.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Instead of directly mmaping/unmapping buffers passed to the IPA, use
a MappedFrameBuffer. The latter is a cleaner interface, and avoid
code duplication.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
During configure() we update the ScalerCropMaximum to the correct
value for this camera mode and work out the minimum crop size allowed
by the ISP.
Whenever a new ScalerCrop request is received we check it's valid and
apply it to the ISP V4L2 device. When the IPA returns its metadata to
us we add the ScalerCrop information, rescaled to sensor native
pixels.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The base class of polymorphic classes is required to declare a
destructor. Several of these are empty, and can thus be declared as
defaulted.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The function gauss_seidel2_SOR() makes use of a function scoped iterator
'i', for several loops, and has a precedence of re-using the function
scoped iterator declaration in the majority of cases, except the first
where it is declared in the loop scope before the function scope, and
later which aliases a new declaration.
Re-use the existing iterator variable for consistency, and to prevent
variable aliasing.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
There is the unnecessary semicolon after ipaCreate() in
raspberrypi.cpp. This removes it.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Set span_r and span_b to -1 so that when they are passed to Pwl::Eval()
they won't cause access to uninitialized memory.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
I presume this code is supposed to set bin_x and bin_y, and not bin_y
two times. This caused use of uninitialized variable later when bin_x
was used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@iki.fi>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the recent change to use C++17, the following code changes can be
made:
- Use C++17 [[fallthough]] attribute instead of /* Fall through */.
- Swap boost::any to std::any.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Change variable names to camel case to be consistent with the rest of
the source files. Remove #define consts and replace with constexpr.
Add some newlines to make the code more readable.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts resolved]
[Kieran: Fix checkstyle line under 80 chars]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
All IPA related types/params are now moved to the RPi namespace.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Rebase merge conflicts fixed]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This avoids a namespace clash with the RPi namespace used by the ipa and
pipeline handlers, and cleans up the syntax slightly.
There are no functional changes in this commit.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Update ALSC (Auto Lens Shading Correction) to handle correctly the
user transform now passed in the camera mode.
The user transform is applied directly in the sensor so the image
statistics already incorporate it, and the adaptive algorithm is
entirely agnostic towards it, so all we have to do is flip the
calibrated tables to match. (These tables will have been calibrated
without the user transform.)
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This commit plumbs the user transform from the Raspberry Pi pipeline
handler through to the IPA. Note that the transform is actually
handled in the sensor (by setting the h/v flip bits), so the IPAs need
to understand the orientation of the image they receive.
Once in the IPA we add it to the CameraMode description, so that it
becomes automatically available to all the individual control
algorithms.
The IPA configure method has to be reordered just a little so as to
fill in the transform in the camera mode before calling SwitchMode.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handle the case where a FrameBuffer that has been externally allocated
(i.e. not through the v4l2 video device) is passed into a Request.
We must store the buffer pointer in the stream internal buffer list to
identify when used.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPA now signals up front how many frames it wants the pipeline
handler to drop. This makes it easier to handle up-coming changes to the
buffer handling for import/export buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The standard way in C++17 to specify that a function or function
argument may be unused it to specify the [[maybe_unused]] attribute.
Replace manual void casts to silence compiler warnings.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
We build libcamera with -Wno-unused-parameter and this doesn't cause
much issue internally. However, it prevents catching unused parameters
in inline functions defined in public headers. This can lead to
compilation warnings for applications compiled without
-Wno-unused-parameter.
To catch those issues, remove -Wno-unused-parameter and fix all the
related warnings with [[maybe_unused]].
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Now that we stop the asynchronous thread on a SwitchMode, we would do
better to regenerate all the tables if the new camera mode crops in a
significantly different way to the old one. A few minor tweaks make
sense along with this:
* Reset the lambda values when we reset everything. It wouldn't make
sense to re-start with the old mode's values.
* Use the last recorded colour temperature to generate new tables rather
than any default value.
* Set the frame "phase" counter to ensure the adaptive procedure will
run asap.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
This fixes a bug where the luminance correction table was not being
resampled according to the camera mode, in the same way as the colour
tables. This could be noticeable if any camera modes crop
aggressively.
This resampling can be done "up front" in the SwitchMode, as we have
only a single fixed luminance table. In order to protect the
recalculation of the table from the asynchronous thread (which reads
it) I've elected to wait for that thread to go idle (though I doubt it
would have mattered much). As a by-product of stopping the thread, it
no longer needs its own copy of the camera mode (async_camera_mode_).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Fix up a few locations where we call notify_one() with the lock
held. In particular, restartAsync does not need to be called with the
lock held for its entire duration.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the libcamera framework, SwitchMode (which overwrites the
camera_mode) cannot run concurrently with Prepare (which uses it).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Implements, for the Raspberry Pi platform, the returning of the CCM
(Colour Correction Matrix) used by the pipeline in the libcamera
metadata.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Remove use of vcsm allocations and replace with dma heap allocations.
The pipeline handler now passes the fd of the allocation over to the IPA
instead of the raw pointer.
Also use libcamera::FileDescriptor for fd lifetime management.
This commit must be built alongside the accompanying BCM2835 ISP kernel
driver changes at https://github.com/raspberrypi/linux/pull/3715.
Otherwise a mismatch will cause undefined behavior.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Raspberry Pi IPA uses the custom RPI_IPA_ACTION_SET_SENSOR_CONFIG
frame action to send the sensor staggered write configuration to the
pipeline handler when the IPA is configured. Replace this ad-hoc
mechanism by passing the corresponding data back from the IPA to the
pipeline handler through the configure() response. This allows
synchronous handling of the response on the pipeline handler side.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The IPAInterface::configure() function now accepts custom configuration
data. Use it to pass the lens shading table instead of using a custom
IPA event. This will allow starting the IPA when starting the camera,
instead of pre-starting it early in order to process the lens shading
table allocation event.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The camera sensor orientation is now handled by the pipeline handler.
Drop hardcoded per-sensor orientations from the IPA.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Add two new parameters, ipaConfig and result, to the
IPAInterface::configure() function to allow pipeline handlers to pass
custom data to their IPA, and receive data back. Wire this through the
code base. The C API interface will be addressed separately, likely
through automation of the C <-> C++ translation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Switch FocusStatus::num to unsigned int for convenience.
Fill in libcamera::controls::FocusFoM with the average of the middle two
regions (across a 4x3 grid) FoM statistics from the ISP.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
