summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi
AgeCommit message (Collapse)Author
2021-06-25libcamera/base: Move span to base libraryKieran Bingham
Move span, and adjust the Doxygen exclusion as well. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move extended base functionalityKieran Bingham
Move the functionality for the following components to the new base support library: - BoundMethod - EventDispatcher - EventDispatcherPoll - Log - Message - Object - Signal - Semaphore - Thread - Timer While it would be preferable to see these split to move one component per commit, these components are all interdependent upon each other, which leaves us with one big change performing the move for all of them. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move utils to the base libraryKieran Bingham
Move the utils functionality to the libcamera/base library. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-22ipa: raspberrypi: Fix possible buffer overrun in metadata parsingNaushir Patuck
The SMIA metadata parser could possibly read one byte past the end of the buffer as the buffer size test ran after the read operation. Fix this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Non-functional formatting fixes to md_parser_smia.cppNaushir Patuck
Adjust source formatting to closer match libcamera guidelines: - Remove unused header files. - Switch to C style comments. - Adjust whitespace for readability. - Remove retcode local variable usage. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Rename md_parser.cpp to md_parser_smia.cppNaushir Patuck
The file implements the MdParserSmia class, so change the file name to reflect this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Set default values for member variables of MdParserNaushir Patuck
Set some sensible default values for member variables of the MdParser class. Remove buffer_size_bytes_ along with some related asserts as this class now uses libcamera::Span for buffer handling, and buffer_size_bytes_ is unused. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-15ipa: raspberrypi: Non-functional formatting fixes to md_parser.hppNaushir Patuck
Adjust source formatting to closer match libcamera guidelines: - Switch to C style comments. - Add whitespace for readability. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch the AGC/Lux code to use utils::DurationNaushir Patuck
Convert the core AGC and Lux controller code to use utils::Duration for all exposure time related variables and calculations. Convert the exposure/shutter time fields in AgcStatus and DeviceStatus to use utils::Duration. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch AgcAlgorithm API to use utils::DurationNaushir Patuck
Switch the AgcAlgorithm API functions to use utils::Duration for all time based variables. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-08ipa: raspberrypi: Switch ipa and cam_helper to use utils::DurationNaushir Patuck
Switch the ipa and cam_helper code to use libcamera::utils::Duration for all time based variables. This improves code readability and avoids possible errors when converting between time bases. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-27controls: Split FrameDurations into FrameDuration and FrameDurationLimitsPaul Elder
We need a separate control to report the nominal frame duration, but it's also useful to report the min/max frame duration values that will be used. Split the FrameDurations control into FrameDuration and FrameDurationLimits respectively to support both of these. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2021-05-24ipa: ipc: Rename CameraSensorInfo to IPACameraSensorInfoUmang Jain
This matches the naming convention for IPA IPC. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-24ipa: mojom: Move CameraSensorInfo struct exclusively to IPA IPCUmang Jain
CameraSensorInfo structure is designed to pass in camera sensor related information from pipeline-handler to IPA. Since the pipeline-handler and IPA are connected via mojom IPC IPA interface, the interface itself provides a more suitable placement of CameraSensorInfo, instead of camera_sensor.h (which is a libcamera internal header ultimately, at this point). As CameraSensorInfo is already defined in core.mojom, it is just a matter of removing [skipHeader] tag to allow code-generation of CameraSensorInfo. Finally, update header paths to include CameraSensorInfo definition from IPA interfaces instead of "libcamera/internal/camera_sensor.h". Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11meson: Replace obselete join_paths() with '/' operatorUmang Jain
Since meson v0.49.0, join_paths() is equivalent to '/' hence, drop and replace it with '/' short-hand in meson files. This commit does not introduce any functional changes. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-05-11ipa: raspberrypi: Rate-limit the controller algorithmsNaushir Patuck
The controller algorithms currently run on every frame provided to the IPA by the pipeline handler. This may be undesirable for very fast fps operating modes where it could significantly increase the computation cycles (per unit time) without providing any significant changes to the IQ parameters. The added latencies could also cause dropped frames. Pass the FrameBuffer timestamp to the IPA through the controls. This timestamp will be used to rate-limit the controller algorithms to run with a minimum inter-frame time given by a compile time constant, currently set to 16.66ms. On startup, we don't rate-limit the algorithms until after the number of frames required for convergence. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add a Merge method to RPiController::MetadataNaushir Patuck
Add a new Merge method to the Metadata class. This will merge all unique key/value pairs from a source metadata map to the destination map. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Add move/copy ctors and operators to Metadata classNaushir Patuck
Add a default, move and copy constructor as well as a move operator implementation RPiController::Metadata class. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Switch to std::scoped_lock in the Metadata classNaushir Patuck
Replace std::lock_guard with std::scoped_lock. When locking a single mutex, both are functionally the same. When locking two mutexes in the operator= overload, the scoped_lock uses a deadlock avoidance algorithm to avoid deadlock. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Reformat RPiController::Metadata class headerNaushir Patuck
Rearrange header includes to be in alphabetical order. Add whitespace to class definition to match libcamera coding guidelines. Fix a typo in the comment showing an example of scoped locks. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-11ipa: raspberrypi: Store dropped frame count in a member variableNaushir Patuck
Store the number of dropped frames on startup in a member variable. This will be used in a subsequent change for rate limiting the controller algorithms. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Use CamHelpers to generalise sensor embedded data parsingDavid Plowman
CamHelpers get virtual Prepare() and Process() methods, running just before and just after the ISP, just like Raspberry Pi Algorithms. The Prepare() method is able to parse the register dumps in embedded data buffers, and can be specialised to perform custom processing when necessary. The IPA itself only needs to call the new Prepare() and Process() methods. It must fill in the DeviceStatus from the controls first, in case the Prepare() method does not supply its own values. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-05-08ipa: raspberrypi: Make sensor embedded data parser use Span classDavid Plowman
Improve MdParser::Parse() by taking a Span, pointing to const data that it should not change, as its input buffer. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-27ipa: cam_helper: Correct a wrong choice of termSebastian Fricke
Sensors provide embedded data buffers and not metadata buffers, replace the incorrect term with the correct one. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-27ipa: cam_helper_imx219: Rework commentSebastian Fricke
Fix two typos and improve the sentence. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-04-15ipa: raspberrypi: cam_helper: Remove duplicate wordsSebastian Fricke
Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-29ipa: raspberrypi: Fix typo and improve wordingSebastian Fricke
s/Return the validated limits out though metadata./ Return the validated limits via metadata./ Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-28ipa: raspberrrypi: Remove duplicate commentSebastian Fricke
The exact same comment is used two times within 5 lines. Remove one of them as it is redundant. Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::configure()Naushir Patuck
Rename ConfigInput to IPAConfig to be more consistent with the naming, and remove ConfigInput::op, as it is never used. Replace ConfigOutput with a ControlList type, as that is the only return type from ipa::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Rationalise parameters to ipa::start()Naushir Patuck
Separate out the in and out parameters in ipa::start() as they are not the same. This function now takes in a ControlList and returns out a struct StartConfig which holds a ControlList and drop frame count for the pipeline handler to action. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Remove unused member variableNaushir Patuck
The lastMode_ member variable is now unused, so remove it. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23ipa: raspberrypi: Move the controller initialise to ipa::init()Naushir Patuck
The controller initialise is a one-off operation, so move it from ipa::configure() to ipa::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-23pipeline: ipa: raspberrypi: Open the CamHelper on ipa::init()Naushir Patuck
Move the opening of the CamHelper from ipa::configure() to ipa::init(). This allows the pipeline handler to get the sensor specific parameters in pipeline_handler::match() where the ipa is initialised. Having the sensor parameters available earlier will allow selective use of the embedded data node in a future change. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-14ipa: raspberrypi: Add support for imx327-based SE327M12 moduleDavid Plowman
This patch adds support for the Soho Enterprises SE327M12 module. The sensor is an imx327 which therefore uses the imx290 kernel driver and CamHelper. To use this module and camera tuning, place the following in the /boot/config.txt file: dtoverlay=imx290,clock-frequency=37125000 and then the existing imx290.json file must be over-written with se327m12.json Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Use direct return value for configure()Paul Elder
Now that we support returning int directly in addition to other output parameters, improve the configure() function in the raspberrypi IPA interface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Rename vblank field in SensorConfig to vblankDelayDavid Plowman
The name vblankDelay is clearer. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Add support for imx290/imx327 sensorsDavid Plowman
imx290 and imx327 share the same kernel driver (imx290.c) and are therefore both recognised here as "imx290". We add the necessary CamHelper for these sensors, as well as a camera tuning file. The tuning was done with an Innomaker STARVIS IMX327LQR module. These have no IR cut filter so there is no proper colour tuning. However, you should obtain reasonable results for most modules using this sensor. Specific tunings for further modules can always be added subsequently. To use this sensor on the Raspberry Pi platform, please add dtoverlay=imx290,clock-frequency=74250000 into your /boot/config.txt file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-09ipa: raspberrypi: Make CamHelpers return the frame delay for vblankingDavid Plowman
For some sensors (e.g. imx477) we need to update the vblanking on the frame before the exposure. For this reason the GetDelays method must also return the number of frame delays for the vblanking control. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-04ipa: raspberrypi: Remove MdParserRPiNaushir Patuck
With the recent change to pass a ControlList to the IPA with exposure and gain values used for a frame, RPiController::MdParserRPi is not needed any more. Remove all traces of it. The derived CamHelper objects now pass nullptr values for the parser to the base CamHelper class when sensors do not use metadata. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-03-04pipeline: ipa: raspberrypi: Pass exposure/gain values to IPA though controlsNaushir Patuck
When running with sensors that had no embedded data, the pipeline handler would fill a dummy embedded data buffer with gain/exposure values, and pass this buffer to the IPA together with the bayer buffer. The IPA would extract these values for use in the controller algorithms. Rework this logic entirely by having a new RPiCameraData::BayerFrame queue to replace the existing bayer queue. In addition to storing the FrameBuffer pointer, this also stores all the controls tracked by DelayedControls for that frame in a ControlList. This includes include exposure and gain values. On signalling RPi::IPA_EVENT_SIGNAL_ISP_PREPARE IPA event, the pipeline handler now passes this ControlList from the RPiCameraData::BayerFrame queue. The IPA now extracts the gain and exposure values from the ControlList instead of using RPiController::MdParserRPi to parse the embedded data buffer. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Ignore invalid statistics zones correctlyDavid Plowman
Regions of the image where the statistics are not trusted should not be put in the zones_ list. This also means that the AWB may fail to run initially, so async_results_ needs to be initialised to some kind of default. Finally, the RGB zone structures can be zero-initialised safely now, the previous value of -1 would seem unusual. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-26ipa: raspberrypi: AWB: Remove unused codeDavid Plowman
Some more code from pre-libcamera versions is removed. There is no functional change. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Rename IPA Interface namespace to ipa::RPiNaushir Patuck
Rename the IPA interface namespace to ipa::RPi for consistency with the libcamera::RPi namespace label. There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19pipeline: ipa: raspberrypi: Tidy-ups after IPAInterface changesNaushir Patuck
This commit addresses a couple of tidy-ups after the IPAInterface rework: - Rename ConfigStaggeredWrite -> ConfigSensorParams - Rename setIsp -> setIspControls There is no functional change in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-19ipa: raspberrypi: Do not require SDN (spatial denoise) algorithmDavid Plowman
A camera tuning is not required to load an SDN algorithm. In keeping with other controls, do not fail when a particular control was expecting this algorithm, just warn that it is not present. Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-17ipa: raspberrypi: Fix exposure and gain delays for imx477Naushir Patuck
The exposure and gain delays for imx477 are both 2 frames. This error was not noticeable because the controller was using the embedded metadata to get the exposure and gain values for the frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-16libcamera: IPAInterface: Replace C API with the new C++-only APIPaul Elder
Remove everything related to the C API, including ipa_context, ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant documentation. ipaCreate() provided by IPA implementations, and createInterface() provided by IPAModule (wrapper around IPA implementation) both now return a C++ object IPAInterface instead of struct ipa_context. Although IPAInterfaceWrapper is the only component of libipa, the skeleton and build files for libipa are retained. After converting the C API to the C++-only API, make all pipeline handlers and IPAs use the new API. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- This is a combination of 21 commits: --- libcamera: IPAModule: Replace ipa_context with IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate_() and createInterface() return IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: ipa_context_wrapper: Remove ipa_context_wrapper Since ipa_context has been replaced with custom IPAInterfaces, it is not longer needed. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: remove ipa_context and functions from documentation Remove all the documentation related to ipa_context and the C IPA API, as well as the documentation about the functions in the IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAInterface: Remove all functions from IPAInterface Now that all the functions in the IPA interface are defined in the data definition file and a specialized IPAInterface is generated per pipeline handler, remove all the functions from the base IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: make ipaCreate return IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate return IPAinterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- ipa: remove IPAInterfaceWrapper As every pipeline has its own proxy, IPAInterfaceWrapper is no longer necessary. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- libcamera: IPAProxy: Remove stop() override Since stop() is part of the IPA interface, and the IPA interface is now generated based on the data definition file per pipeline, this no longer needs to be overrided by the base IPAProxy. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme IPAProxy is changed in two major ways: - Every pipeline has its own proxy, to support each pipeline's IPA interface - IPAProxy implementations always encapsulate IPA modules, and switch internally for isolation or threaded The IPAProxy registration mechanism is removed, as each pipeline will have its own proxy, so the pipeline can pass the specialized class name of the IPAProxy to the IPAManager for construction. IPAManager is changed accordingly to support these changes: - createIPA is a template function that takes an IPAProxy class, and always returns an IPAProxy - IPAManager no longer decides on isolation, and simply creates an IPAProxy instance while passing the isolation flag Consequently, the old IPAProxy classes (IPAProxyThread and IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use the new IPAManager interface, and to construct a ProcessManager as no single global instance is created anymore. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> --- libcamera: IPAProxy: Add isolate parameter to create() Since IPAProxy implementations now always encapsulate IPA modules, add a parameter to create() to signal if the proxy should isolate the IPA or not. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline Now that each pipeline handler has its own IPAProxy implementation, make the IPAManager fetch the IPAProxy based on the pipeline handler name. Also, since the IPAProxy is used regardless of isolation or no isolation, remove the isolation check from the proxy selection. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAManager: add isolation flag to proxy creation When the IPA proxy is created, it needs to know whether to isolate or not. Feed the flag at creation of the IPA proxy. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Make createIPA return proxy directly Since every pipeline knows the type of the proxy that it needs, and since all IPAs are to be wrapped in a proxy, IPAManager no longer needs to search in the factory list to fetch the proxy factory to construct a factory. Instead, we define createIPA as a template function, and the pipeline handler can declare the proxy type when it calls createIPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy: Remove registration mechanism Implementations of IPA proxies use a registration mechanism to register themselves with the main IPA proxy factory. This registration declares static objects, causing a risk of things being constructed before the proper libcamera facilities are ready. Since each pipeline handler has its own IPA proxy and knows the type, it isn't necessary to have a proxy factory. Remove it to alleviate the risk of early construction. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread We have now changed the proxy from per-IPC mechanism to per-pipeline. The per-IPC mechanism proxies are thus no longer needed; remove them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- tests: ipa_interface_test: Update to use new createIPA Update the IPA interface test to use the new createIPA function from IPAManager. Also create an instance of ProcessManager, as no single global instance is created automatically anymore. Update meson.build to to depend on the generated IPA interface headers. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: PipelineHandler: Remove IPA from base class Since pipeline handlers now have their own IPA interface types, it can no longer be defined in the base class, and each pipeline handler implementation must declare it and its type themselves. Remove it from the base class. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- ipa: raspberrypi: Add mojom data definition file Add a mojom data definition for raspberrypi pipeline handler's IPAs. This simplifies the API between the raspberrypi pipeline handler and the IPA, and is not a direct translation of what was used before with IPAOperationData. Also move the enums from raspberrypi.h to raspberrypi.mojom Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: raspberrypi: Use new data definition Now that we can generate custom functions and data structures with mojo, switch the raspberrypi pipeline handler and IPA to use the custom data structures as defined in the mojom data definition file. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: vimc: Support the new IPC mechanism Add support to vimc pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> --- libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism Add support to the rkisp1 pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism Add support to ipu3 pipeline handler and IPA for the new IPC mechanism. [Original version] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> [Fixed commit message and small changes] Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-16ipa: raspberrypi: meson: Add dependency on generated headersPaul Elder
The raspberrypi IPA will depend on the raspberrypi IPA header generated from the mojo definition file. Add the dependency. Simply add all generated headers as a dependency, instead of walking the list of headers, to simplify the implementation. This will have the effect of generating all headers before compiling the IPA, which has no drawbacks. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2021-02-11ipa: raspberrypi: AWB: Fix race condition setting manual gainsDavid Plowman
Applying the manual_r_ and manual_b_ values is entirely removed from the asynchronous thread where their use constituted a race hazard. The main thread now deals with them entirely, involving the following changes. 1. SetManualGains() applies the new values directly to the "sync_results", meaning that Prepare() will jump to the new values immediately (which is a better behaviour). 2. Process() does not restart the asynchronous thread when manual gains are in force. 3. The asynchronous thread might be running when manual gains are set, so we ignore the results produced in this case. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-02-11meson: Fix coding style when declaring arraysLaurent Pinchart
The meson.build files mix array declarations with and without a space after the opening and before the closing square bracket. The vast majority of cases don't use spaces, so standardize on that. While it it, fix indentation in a few places. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>