summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi
AgeCommit message (Collapse)Author
2023-03-28ipa: raspberrypi: Add sensor mode limits to CameraModeNaushir Patuck
Add fields in the CameraMode structure to capture the mode specific limits for analogue gain and shutter speed. For convenience, also add fields for minimum and maximum frame durations. Populate these new fields when setting up the CameraMode structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21ipa: raspberrypi: Fix crash under LTODave Jones
When compiled with LTO (the default on Ubuntu), the global static objects camHelpers and algorithms cause a crash in raspberrypi_ipa_proxy at runtime as they're not allocated by the time the registration routines execute. This is a fairly crude fix which just converts the global static objects into local static objects inside an equivalently named function. Signed-off-by: Dave Jones <dave.jones@canonical.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: imx296: Minor tuning updatesDavid Plowman
Some updates to the tuning for the imx296 sensors. For the colour variant: * Minor change to the AWB curve, making things a little less green. * Updated CCMs that reduce colour saturation to a more accurate level. Thanks to Dr. Rolf Henkel for these measurements and calculations. * Sharpening has been toned down quite a lot. * rpi.focus algorithm added so that the focus measure can be accessed. The sharpening and focus changes are applied to the mono version of the sensor too as we expect similar characteristics. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: agc: Fix overflow in Y value calculationDavid Plowman
The maxVal variable in the computeInitialY function needs to be a uint64_t, otherwise the subsequent multiplications in the function can overflow on relatively high resolution images (when the counts in the regions go over 16 bits). Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07ipa: raspberrypi: Better heuristics for calculating Unicam timeoutNaushir Patuck
The existing mechanism of setting a timeout value simply uses the maximum possible frame length advertised by the sensor mode. This can be problematic when, for example, the IMX477 sensor can use a frame length of over 600 seconds. However, for typical usage the frame length will never go over several 100s of milliseconds, making the timeout very impractical. Store a list of the last 10 frame length values requested by the AGC. On startup, and at the end of every frame, take the maximum frame length value from this list and return that to the pipeline handler through the setCameraTimeoutValue() signal. This allows the timeout value to better track the actual sensor usage. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-07pipeline: ipa: raspberrypi: Change Unicam timeout handlingNaushir Patuck
Add an explicit helper function setCameraTimeout() in the pipeline handler to set the Unicam timeout value. This function is signalled from the IPA to set up an appropriate timeout. This replaces the maxSensorFrameLengthMs value parameter returned back from IPARPi::start(). Adjust the timeout to be 5x the maximum frame duration reported by the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Normalise region sums to 16-bitsNaushir Patuck
The VC4 ISP uses a pipeline bit-depth of 13-bits. The AGC algorithm needs to know this bit-depth when computing the Y value for the image. Instead of hardcoding the VC4 bit-depth in the AGC source code, normalise all region sums to 16-bits when filling the Statistics structure. AWB and ALSC are agnostic about pipeline depth, so do not need changing. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Use the generic statistics structure in the algorithmsNaushir Patuck
Repurpose the StatisticsPtr type from being a shared_ptr<bcm2835_isp_stats> to shared_ptr<RPiController::Statistics>. This removes any hardware specific header files and structures from the algorithms source code. Add a new function in the Raspberry Pi IPA to populate the generic statistics structure from the values provided by the hardware in the bcm2835_isp_stats structure. Update the Lux, AWB, AGC, ALSC, Contrast, and Focus algorithms to use the generic statistics structure appropriately in their calculations. Additionally, remove references to any hardware specific headers and defines in these source files. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: awb: Delay release of the statistics bufferNaushir Patuck
Release the statistics buffer after running the through the AWB calculations. Only the "counted" statistics are copied out to a local structure, so keeping the statistics buffer allows the algorithm to see the "uncounted" statistics as well. This is currently handled by hard-coding the total number of statistics regions regions based on the structure definition in the bcm2835_isp_stats structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: histogram: Add a constructor for an empty histogramNaushir Patuck
Add a default constructor to the RPiController::Histogram class that creates an empty histogram. Since this is a cumulative histogram, push a value of 0 into the first (and only) bin to signify this. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-02-09ipa: raspberrypi: Generalise statisticsNaushir Patuck
At present, the controller algorithms access the bcm2835_isp_stats structure, which is hardware specific. It would be desirable to abstract out the statistics structure to remove hardware specific headers from the algorithms source files. Define a new templated RegionStats class that encompasses region based statistics generated by the ISP. For the VC4 ISP, this can be used to hold RGB sums and focus FoM values. Define a new Statistics structure that holds all the VC4 ISP statistics output. This includes AGC histograms, AGC/AWB region sums and focus FoM regions. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add support for the Sony IMX708 sensorNick Hollinghurst
Add support for Raspberry Pi Camera 3 modules (Sony IMX708 camera sensor) to the Raspberry Pi IPA. These modules are available in either normal or wide angle lens, both with IR or no IR cut options, giving a total for 4 variants. Provide IQ tuning files for all four variants. The IMX708 camera helper additionally parses PDAF and HDR histogram data that is provided in the embedded data stream from Unicam. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add lens position to DeviceStatusNaushir Patuck
Add the current frame's lens position (in dioptres) to the DeviceStatus structure. This value is obtained from the AfAlgorithm::getLensPosition() member function. Return this lens position back to the pipeline handler to store in the metadata field of the request. As a drive-by, fixup some inaccurate comments in the DeviceStatus structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst nick.hollinghurst@raspberrypi.com Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: First version of autofocus algorithm using PDAFNick Hollinghurst
Provide the first version of the Raspberry Pi autofocus algorithm. This implementation uses a hybrid of contrast detect autofocus (CDAF) and phase detect autofocus (PDAF) statistics. PDAF is always preferred over CDAF due to having less "hunting" behavior. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus algorithm resultsNick Hollinghurst
Handle the results returned from the autofocus algorithm by updating lens actuator position to the desired value. Update the Request metadata with the algorithm status to provide back to the application. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Handle autofocus controlsNick Hollinghurst
Add handlers for all autofocus related libcamera controls. Translate these controls to the RPiController autofocus algorithm API. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Include autofocus controls in the IPA ControlInfoMapNaushir Patuck
Add all the autofocus controls handled by the IPA into the ControlInfoMap if a controllable lens actuator is present. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Reorder header file inclusionNaushir Patuck
Reorder the libcamera/request header file inclusion to match the libcamera guidelines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30ipa: raspberrypi: Add autofocus algorithm interface headersNick Hollinghurst
Add a new AfAlgorithm class that defines the interface for the Raspberry Pi autofocus algorithm. Add an AfStatus structure that returns the results of the autofocus algorithm back to the IPA. Add a structure for PDAF statistics provided by supported sensors for use with an autofocus algorithm. This structure is currently based on the IMX708's PDAF "Type 1" statistics. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Validate lens controlsNaushir Patuck
Pass the available lens controls to the IPA through the configure() function. Validate that the V4L2_CID_FOCUS_ABSOLUTE does exist. If it doesn't, log a warning message, and do not advertise focus related controls from the IPA. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Replace entityControlsNaushir Patuck
Replace the legacy entityControls map passed into ipa::configure() with explicit fields for sensor and ISP controls. This removes any ambiguity over which set of controls corresponds with specific integer keys. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Remove unused streamConfigNaushir Patuck
Remove the streamConfig parameter from the ipa::configure() call, it is never used. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-01-30pipeline: ipa: raspberrypi: Check if lens actuator is availableNaushir Patuck
Check if a lens actuator is available by the presense of the lens driver entity in the pipeline handler. Pass this result to the IPA on init. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-22ipa: raspberrypi: Fix permissions on imx477_scientific.jsonLaurent Pinchart
The imx477_scientific.json file was added to the source tree with incorrect executable permission. Fix it. Fixes: bf66a1d25162 ("ipa: raspberrypi: Add a "scientific" tuning for the IMX477") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-12-19ipa: raspberrypi: Add a "scientific" tuning for the IMX477Naushir Patuck
Add a tuning file for the IMX477 more suited to scientific applications. The key differences from the original tuning file are: - Disable ALSC block completely - Pure rec709 gamma curve, and no contrast enhance - New CT curve and CCMs based on the illumination spectrum of a black body radiator up to about 3600 K and the CIE illuminant D for higher color temperatures. Further details on the changes can be found at: https://forums.raspberrypi.com/viewtopic.php?t=343449 All credit for these changes go to Dr. Rolf Henkel. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Rolf Henkel <cpixip@pixelcircus.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: imx477: Update tuning file for the latest camera modulesDavid Plowman
The latest camera modules have a very slightly different IR filter, so the tuning file is slightly revised to give best results with both old and new camera modules. The original tuning file is retained as imx477_v1.json in case anyone should wish to continue using it. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-30ipa: raspberrypi: Fix bug in IPA frame drop logicNaushir Patuck
Fix a bug in the IPA frame dropping (for rate control) logic, where the metadata for the current context was copied from itself (i.e. a no-op), instead of being copied from the previous context. This bug does not occur in normal conditions, only when running with a low exposure time and unconstrained framerate, which happens in a particular picamera2 test. Fixes: 546154b13433 ("pipeline: ipa: raspberrypi: Use IPA cookies") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-11-29ipa: raspberrypi: agc: Fix digital gain calculation for manual modeNaushir Patuck
The digital gain calculation uses a total exposure value computed with the current AGC state. However, this is wrong in the case of manual shutter/gain controls, as the total exposure value used must be the value computed when the AGC sent the manual shutter/gain controls to the pipeline handler to action. To fix this, the IPA now adds the historical AgcStatus structure to the metadata (tagged with "agc.delayed_status"). This historical AgcStatus structure contains the total exposure value calculated when the AGC sent the manual shutter/gain controls to the pipeline handler. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29pipeline: ipa: raspberrypi: Use IPA cookiesNaushir Patuck
Pass an IPA cookie from the pipeline handler to the IPA and eventually back to the pipeline handler through the setDelayedControls signal. This cookie is used to index the RPiController::Metadata object to be used for the frame. The IPA cookie is then returned from DelayedControls when the frame with the applied controls has been returned from the sensor, and eventually passed back to the IPA from the signalIspPrepare signal. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Use an array of RPiController::Metadata objectsNaushir Patuck
Allow the IPA to cycle through an array of RPiController::Metadata objects, one per prepare()/process() invocation, when running the controller algorithms. This allows historical metadata objects to be retained, and subsequently passed into the controller algorithms on future frames. At present, only a single index into this array is used. This change provides a route to fixing a problem with the AGC algorithm, where if a manual shutter/gain is requested, the algorithm does not currently retain any context of the total exposure that it has calculated. As a result, the wrong digital gain would be applied when the frame with the manual shutter/gain is processed by the ISP. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-29ipa: raspberrypi: Add RPiController::Metadata::mergeCopyNaushir Patuck
Add a new member function to RPiController::Metadata that copies unique key/value pairs from one object to the other. This is different from std::map::merge that would remove the key/value pairs from the source object. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-23pipeline: raspberrypi: Remove enum BuffferMask from the mojom interfaceNaushir Patuck
The BufferMask enum provides a way of identifying which stream a frame buffer belongs to. This enum is defined in the raspberrypi.mojom interface file. However, the IPA does not need these enum definitions to mmap buffers that it uses. Move this enum out of the raspberrypi.mojom interface file and put it into the RPi namespace visible only to the pipeline handler. This removes the need to include the auto-generated IPA interface header in the RPi::Stream definition. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-11-21ipa: raspberrypi: Remove generic "pause" mechanism from AlgorithmNick Hollinghurst
No existing Algorithm used the base pause(), resume() functions or the paused_ flag, nor is there a need for a generic pause API. Remove these. The AGC and AWB algorithms now have methods named disableAuto(), enableAuto() which better describe their functionality. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-28ipa: raspberrypi: awb: Update colour temperature whenever manual gains changeDavid Plowman
Previously we only did this when the system starts (on the first switch_mode). Now we do it whenever the manual colour gains are updated. To facilitate this, this R/B vs. colour temperature inverse functions are stored persistently in the AwbConfig. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: raspberry: replace abs() with std::abs()Nicholas Roth
pwl.cpp uses abs() instead of std::abs(), which causes unexpected behavior in the Clang compiler used for Android. Replace with C++-standard absolute value function std::abs(), which supports double-precision absolute values in a standard way. Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-28ipa: add missing thread-safety annotationsNicholas Roth
The raspberrypi IPA is missing thread-safety annotations, which breaks the build. Add required thread-safety annotations. ../src/ipa/raspberrypi/controller/metadata.h:108:31: error: mutex 'mutex_' is still held at the end of function [-Werror,-Wthread-safety-analysis] void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:108:23: note: mutex acquired here void lock() { mutex_.lock(); } ^ ../src/ipa/raspberrypi/controller/metadata.h:109:25: error: releasing mutex 'mutex_' that was not held [-Werror,-Wthread-safety-analysis] void unlock() { mutex_.unlock(); } ^ Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-10-20ipa: raspberrypi: Rename ov9281.json to ov9281_mono.jsonNaushir Patuck
The recent change to the naming scheme for the camera tuning files failed to rename ov9281.json, causing the sensor to fail to load. Since this is a mono sensor module, rename this file to ov9281_mono.json. Fixes: 820607b195ff: ("pipeline: raspberrypi: Update naming convention for tuning files") Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Extract line length from the embedded data parserNaushir Patuck
Update the imx219, imx477 and imx519 parsers to extract the line length values from the embedded data stream and use these values in the deviceStatus metadata, replacing the DelayedControls provided values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Allow full line length controlNaushir Patuck
Rename CamHelper::getVBlanking to CamHelper::getBlanking, and update the calculations in that function to return both horizontal and vertical blanking values for a given exposure time and frame duration limits. The calculations are setup such that vertical blanking is extended to the maximum allowable value, and any remainder gets put into horizontal blanking. The calculated horizontal blanking value is now returned to the pipeline handler to pass into DelayedControls to program into the sensor. Update the IPA to now specify the maximum frame duration from the maximum horizontal + vertical blanking values provided by the sensor mode. Additionally, the IPA now uses the frame specific horizontal blanking value (as returned by DelayedControls) in all instances. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add line length to DeviceStatusNaushir Patuck
Add a lineLength field to the DeviceStatus structure to store the line length used for a particular frame. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add line length calculations helper functionsNaushir Patuck
Add CamHelper::hblankToLineLength() to calculate the line length duration from the horizontal blanking (in pixels) value. Add CamHelper::lineLengthToHblank() to calculate the horizontal blanking (in pixels) value from the line length duration. Add CamHelper::lineLengthPckToDuration() to calculate the line length duration from the line length in pixels. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add pixel clock rate to the CameraMode structureNaushir Patuck
The pixel clock rate will be used in subsequent commits to calculate line length durations. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18pipeline: ipa: raspberrypi: Add HBLANK control to DelayedControlsNaushir Patuck
Update CamHelper::getDelays() to return the sensor HBLANK delay. The HBLANK delay is set to the same value as VBLANK delay for all sensors in the Raspberry Pi IPA. Return the HBLANK gain delay from the IPA to the pipeline handler, and initialise DelayedControls to handle V4L2_CID_HBLANK with this delay value. As a drive-by, check that the V4L2_CID_HBLANK control is available when calling IPARPi::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Remove initialized_ field from CamHelperNaushir Patuck
Given that the single user of the CamHelper is the Raspberry Pi IPA, the initialized_ field check is unnecessary. Remove the check and the field. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Pass lineLength into the CamHelper APINaushir Patuck
Update CamHelper::exposureLines() and CamHelper::exposure() to take a line length duration parameter for use in the exposure calculations. For now, only use the minimum line length for all the calculations to match the existing IPA behavior. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18ipa: raspberrypi: Add minimum and maximum line length fields to CameraModeNaushir Patuck
Add fields for minimum and maximum line length duration to the CameraMode structure. This replaces the existing lineLength field. Any use of the existing lineLength field is replaced by the new minLineLength field, as logically we always want to use the fastest sensor readout by default. As a drive-by cosmetic change, split all fields in the CameraMode structure into separate lines. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-18camera_sensor: Add minimum and maximum line length to IPACameraSensorInfoNaushir Patuck
Add fields for minimum and maximum line length (in units of pixels) to the IPACameraSensorInfo structure. This replaces the existing lineLength field. Update the ipu3, raspberrypi and rkisp1 IPAs to use IPACameraSensorInfo::minLineLength instead of IPACameraSensorInfo::lineLength, as logically we will always want to use the fastest sensor readout by default. Since the IPAs now use minLineLength for their calculations, set the starting value of the V4L2_CID_HBLANK control to its minimum in CameraSensor::init(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-07ipa: raspberrypi: Remove unneeded Span castsLaurent Pinchart
Commit 09c1b081baa2 ("libcamera: controls: Generate and use fixed-sized Span types") added explicit Span casts for fixed extent spans that were required due to the ControlList::set() function that takes an std::initializer_list not being able to infer a control size from template arguments. This has now been fixed, so the casts are not needed anymore. Drop them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Christian Rauch <Rauch.Christian@gmx.de> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-10-05ipa: raspberrypi: Fix the imx296 mono tuning black levelNaushir Patuck
The sensor black level is 60 (in 10-bits), fix this in the mono variant tuning file. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-10-05ipa: raspberrypi: Add a tuning file for the colour variant of IMX296Naushir Patuck
Add the tuning file (imx296.json) for the colour variant of the IMX296 sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>