summaryrefslogtreecommitdiff
path: root/src/ipa/raspberrypi/controller/rpi/agc.cpp
AgeCommit message (Collapse)Author
2020-12-11ipa: raspberrypi: agc: Add GetConvergenceFrames method to AGC base classDavid Plowman
We add a GetConvergenceFrames method to the AgcAlgorithm class which can be called when the AGC is started from scratch. It suggests how many frames should be dropped before displaying any (while the AGC converges). The Raspberry Pi specific implementation makes this customisable from the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: agc: Make AGC handle Pause/Resume for itselfDavid Plowman
AGC, when paused, sets the last exposure/gain it wrote to be its "fixed" values and will therefore continue to return them. When resumed, we clear them so that both will float again. This approach is better because AGC can be paused and we can subsequently change (for example) the exposure and the gain won't float again. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-01src: ipa: raspberrypi: Avoid AGC filtering when both gain and shutter specifiedDavid Plowman
When both gain and shutter have been directly specified, do not filter slowly towards those target values, but adopt them immediately. This should match user expectations better. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Improve AE locked logicDavid Plowman
Previously we required that the sensor absolutely reaches the target exposure, but this can fail if frame rates or analogue gains are limited. Instead insist only that we get several frames with the same exposure time, analogue gain and that the algorithm's target exposure hasn't changed either. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for ↵David Plowman
partly saturated images When parts of an image saturate then the image brightness no longer increases linearly with increased exposure/gain. Having calculated a linear gain value it's better then to try it, allowing for saturating regions, and if necessary increase the gain some more. We repeat this several times. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: src: ipa: raspberrypi: agc: Fix uninitialised members in Agc ↵David Plowman
constructor Use memset in the constructor for embedded structures, it is tidier and initialises everything. We use the initialiser list for other members. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Report fixed exposure/gain values during ↵David Plowman
SwitchMode When an application has specified fixed exposure time and/or gain they must be programmed into the sensor immediately, even before the sensor has been started. For this to happen they must be written into the image metadata when the SwitchMode method is invoked. We also make the default exposure/gain, when nothing has been set, customisable in the tuning file. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Fetch AWB status only onceDavid Plowman
Introduce a function to fetch the AwbStatus (fetchAwbStatus), and call it unconditionally at the top of Prepare so that both Prepare and Process know thereafter that it's been done. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Improve centre-weighted luminance calucationDavid Plowman
Previously the calculation computed Y for each region before returning the weighted average, which "baked in" the over-importance of small statistics regions. The revised calculation will treat all pixels equally when the region weights are the same, making it easier to use. With the previous scheme, proper "average" metering was difficult to implement. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Rename method to divideUpExposureDavid Plowman
The method formerly known as divvyupExposure is given a more understandable name. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Remove unnecessary lockingDavid Plowman
On the libcamera/VC4 platform the AGC Prepare/Process methods, and any changes to the AGC settings, run synchronously - so a number of mutexes and copies are unnecessary and can be removed. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-11-23libcamera: ipa: raspberrypi: agc: Use libcamera debugDavid Plowman
Replace Raspberry Pi debug with libcamera debug. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-09-29ipa: raspberrypi: Rename the controller namespace from Rpi to RpiControllerNaushir Patuck
This avoids a namespace clash with the RPi namespace used by the ipa and pipeline handlers, and cleans up the syntax slightly. There are no functional changes in this commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2020-08-25meson: Remove -Wno-unused-parameterLaurent Pinchart
We build libcamera with -Wno-unused-parameter and this doesn't cause much issue internally. However, it prevents catching unused parameters in inline functions defined in public headers. This can lead to compilation warnings for applications compiled without -Wno-unused-parameter. To catch those issues, remove -Wno-unused-parameter and fix all the related warnings with [[maybe_unused]]. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-06-22libcamera: ipa: raspberrypi: Recalculate camera exposure/gain when camera ↵David Plowman
mode changes This commit causes the AGC to recalculate its camera exposure/gain values when the camera mode changes. For example it's possible that the exposure profile could be changed by the application so the division between exposure time and analogue gain may be different. The other underlying reason (and which this commit accomplishes too) is that the sensor's line timing may change in a new mode, and because V4L2 drivers store a number of exposure _lines_, the resulting _time_ will "change under our feet". So we have to go through the process of recalculating the correct number of lines and writing this back to the sensor with every mode switch, regardless of anything else. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-05-11libcamera: ipa: Raspberry Pi IPANaushir Patuck
Initial implementation of the Raspberry Pi (BCM2835) libcamera IPA and associated libraries. All code is licensed under the BSD-2-Clause terms. Copyright (c) 2019-2020 Raspberry Pi Trading Ltd. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>