| Age | Commit message (Collapse) | Author |
|---|
|
Vimc pipeline handler is enabled unconditionally if the meson config
option '-Dtest' is true. However, this is not true for the vimc IPA.
Hence, a meson configuration such as:
-Dpipelines=raspberrypi -Dipas=raspberrypi -Dtest=true
will include the vimc pipeline handler (in addition to raspberrypi)
but will skip the vimc IPA which can lead to failure of unit tests
that depends on vimc to execute.
One such unit test was identified as a result of this issue on
RaspberryPi:
ERROR IPAModule ipa_module.cpp:278 ipa_vimc.so: Failed to open IPA library: No such file or directory
test IPA module src/ipa/vimc/ipa_vimc.so is invalid
due to the non-existent ipa_vimc.so.
Fix this by including the vimc IPA unconditionally when the tests are
enabled, similar to how the vim pipeline-handler is included.
Fixes: 6e65d4225736 ("libcamera: Enable vimc pipeline handler when tests are enabled")
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
"ipa_modules" stores the value of the ipas meson build option. IPAs are
enabled if and only if there is an enabled pipeline for an IPA listed in
"ipa_modules" array. It is basically the intersection of pipelines and
ipa_modules array.
In order to correctly report which IPAs get enabled, let's create a new
array storing this intersection.
Cc: Quentin Schulz <foss+libcamera@0leil.net>
Reported-by: Daniel Semkowicz <dse@thaumatec.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPAs are loaded from a defined location set as IPA_MODULE_DIR.
Furthermore, configuration files for both libcamera and IPAs are loaded
from paths defined during the meson configuration.
To make it easy to identify these locations for a given configuration,
present them as a 'paths' section in the meson summary.
This adds a summary section to meson in the form:
Paths
LIBCAMERA_DATA_DIR : "/usr/share/libcamera"
LIBCAMERA_SYSCONF_DIR : "/etc/camera/libcamera"
IPA_PROXY_DIR : "/usr/libexec/libcamera"
IPA_CONFIG_DIR : "/etc/camera/libcamera/ipa:/usr/share/libcamera/ipa"
IPA_MODULE_DIR : "/usr/lib/x86_64-linux-gnu/libcamera"
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There can be multiple IPAs per pipeline-handler or platform.
They can live in-tree or externally linked. It is up to the vendor
whether to use in-tree IPA for a platform or provide it externally.
In the case of IPAs being external, building in-tree IPAs might be
futile hence, provide a clear and explicit mechanism to choose whether
to build the in-tree IPA for the platform or not.
By default, all in-tree IPAs are built when a matching Pipeline handler
is also enabled.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Since meson v0.49.0, join_paths() is equivalent to '/' hence,
drop and replace it with '/' short-hand in meson files.
This commit does not introduce any functional changes.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Define libcamera specific system paths for use within the library code
base. These can be used to identify system configuration files and
shared data.
Also, make use of the new system path variables and map the ipa paths
upon the libcamera system path, making use of the new shorter syntax for
join_paths().
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The addition of the new IPA IPC mechanism compiles pipeline-specific
headers to define the interface between the pipeline and the IPA.
This was optimised in 08ce394465b5 ("meson: ipa, proxy: Only build
proxies for enabled pipelines") to only build for enabled pipelines,
however the tests directly use the VIMC pipeline handler, and require
it to be built.
Create a local variable to store the requested pipelines from the user
configuration and extend the enabled pipelines to ensure that VIMC is
always enabled if the tests are also enabled
Fixes: 08ce394465b5 ("meson: ipa, proxy: Only build proxies for enabled pipelines")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Sebastian Fricke<sebastian.fricke@posteo.net>
|
|
Add an empty IPA skeleton for the IPU3 pipeline. The skeleton IPA
handles the flow of parameter and statistic buffers but does not read or
write anything in the buffers. It also allows the IPA to set sensor
controls but does not implement any logic to set optimal values and
instead sets the V4L2 exposure and gain controls to max and keeps them
at that setting.
This IPA is meant as a base to allow the pipeline handler to be wired up
to an IPA. The image algorithms can then later be added to the IPA
independently from also having to add plumbing to the pipeline handler.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The libcamera internal headers are located in src/libcamera/include/.
The directory is added to the compiler headers search path with a meson
include_directories() directive, and internal headers are included with
(e.g. for the internal semaphore.h header)
#include "semaphore.h"
All was well, until libcxx decided to implement the C++20
synchronization library. The __threading_support header gained a
#include <semaphore.h>
to include the pthread's semaphore support. As include_directories()
adds src/libcamera/include/ to the compiler search path with -I, the
internal semaphore.h is included instead of the pthread version.
Needless to say, the compiler isn't happy.
Three options have been considered to fix this issue:
- Use -iquote instead of -I. The -iquote option instructs gcc to only
consider the header search path for headers included with the ""
version. Meson unfortunately doesn't support this option.
- Rename the internal semaphore.h header. This was deemed to be the
beginning of a long whack-a-mole game, where namespace clashes with
system libraries would appear over time (possibly dependent on
particular system configurations) and would need to be constantly
fixed.
- Move the internal headers to another directory to create a unique
namespace through path components. This causes lots of churn in all
the existing source files through the all project.
The first option would be best, but isn't available to us due to missing
support in meson. Even if -iquote support was added, we would need to
fix the problem before a new version of meson containing the required
support would be released.
The third option is thus the only practical solution available. Bite the
bullet, and do it, moving headers to include/libcamera/internal/.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ipa-sign-install.sh script, run when installing libcamera, signs all
IPA modules present in the module directory. This would result in
third-party modules being signed if any are present in the directory.
Fix it by explicitly passing the list of IPA modules to the
ipa-sign-install.sh script.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
|
|
In an attempt to clarify the license terms of all files in the libcamera
project, the build system files deserve particular attention. While they
describe how the binaries are created, they are not themselves
transformed into any part of binary distributions of the software, and
thus don't influence the copyright on the binary packages. They are
however subject to copyright, and thus influence the distribution terms
of the source packages.
Most of the meson.build files would not meet the threshold of
originality criteria required for copyright protection. Some of the more
complex meson.build files may be eligible for copyright protection. To
avoid any ambiguity and uncertainty, state our intent to not assert
copyrights on the build system files by putting them in the public
domain with the CC0-1.0 license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Acked-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Naushir Patuck <naush@raspberrypi.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Show Liu <show.liu@linaro.org>
|
|
Add the Raspberry Pi pipeline handler and IPA as targets in the
meson build system.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Using find_program() to locate scripts part of the source tree causes
meson to print messages at setup time for each of those scripts:
Program ipa-sign.sh found: YES (/home/user/src/libcamera/src/ipa/ipa-sign.sh)
This pollutes the meson setup log with useless messages, as we know the
scripts are present. Use files() instead to avoid this.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the IPA modules are installed, meson strips the DT_RPATH and
DT_RUNPATH from the binaries. This invalidates the signatures. Disable
installation of the .sign files and add an installation script to
regenerate them directly in the target directory. The .sign files still
need to be created at build time to support running IPA modules from the
build tree.
Two alternative approaches have been considered:
- meson could be taught a new target argument to preserve binary
compatibility by skipping any operation that modifies files. This has
been proposed in the #mesonbuild IRC channel. While this could be
interesting in the longer term, we need to fix the issue now.
- The module signatures could be computed on selected sections only.
While skipping the .dynamic section when signing may not cause
security issues, it would make signature generation and verification
more complex, and wasn't deemed worth it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
IPA modules may require configuration files, which may be stored in
different locations in the file system. To standardize file locations
between all IPAs and pipeline handlers, provide a helper function to
locate a configuration file by searching in the following directories:
- All directories specified in the LIBCAMERA_IPA_CONFIG_PATH environment
variable ; or
- In the source tree if libcamera is not installed ; otherwise
- In standard system locations (etc and share directories).
When stored in the source tree, configuration files shall be located in
a 'data' subdirectory of their respective IPA directory.
More locations, or extensions to the mechanism, may be implemented
later.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add infrastructure to generate an RSA private key and sign IPA modules.
The signatures are stored in separate files with a .sign suffix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a 'pipelines' project option that specifies which pipeline handlers
to compile in. The corresponding IPA modules are automatically selected.
The default is to compile all pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Give a subdirectory to all IPA modules to make the structure of the
source tree more consistent. This will also simplify the implementation
of IPA module selection at build time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Switch IPA communication to the plain C API. As the IPAInterface class
is easier to use for pipeline handlers than a plain C API, retain it and
add an IPAContextWrapper that translate between the C++ and the C APIs.
On the IPA module side usage of IPAInterface may be desired for IPAs
implemented in C++ that want to link to libcamera. For those IPAs, a new
IPAInterfaceWrapper helper class is introduced to wrap the IPAInterface
implemented internally by the IPA module into an ipa_context,
ipa_context_ops and ipa_callback_ops.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add an IPA which controls the exposure time and analog gain for a sensor
connected to the rkisp1 pipeline. The IPA supports turning AE on and off
and informing the camera of the status of the AE control loop.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Open source IPA implementations can benefit from usage of libcamera
internal APIs. Allow this by compiling against the internal headers and
linking against libcamera.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The DummyIPA is actually a test IPA module for the virtual media
controller driver VIMC. Rename it accordingly to its usage.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ipa_dummy.cpp and ipa_dummy_isolate.cpp only differ in the license
reported in the IPAModuleInfo structure. Drop the second file and
generate the two .so from ipa_dummy.cpp, with the license defined
through the command line.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add the dummy IPA that needs isolation to meson. At the same time, clean
up the IPA meson to facilitate adding more IPAs.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a dummy IPA module.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
IPAManager is a class that will search in given directories for IPA
modules, and will load them into a list. It also provides an interface
for pipeline handlers to acquire an IPA.
A meson build file for the IPAs is added, which also specifies a
hard-coded path for where to load the IPAs from in the installation
directory. More paths can be specified with the environment variable
LIBCAMERA_IPA_MODULE_PATH, with the same syntax as the regular PATH
environment variable. Make the test framework set this environment
variable.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
