summaryrefslogtreecommitdiff
path: root/src/ipa/libipa
AgeCommit message (Collapse)Author
2022-05-13libipa: camera_sensor_helper: Add OV5675 helperQuentin Schulz
The OV5675 is an OmniVision sensor with a linear gain model, expressed in 1/128 steps. Cc: Quentin Schulz <foss+libcamera@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add OV5640 helperPaul Elder
The OV5640 is an OmniVision sensor with a linear gain model, expressed in 1/16 steps. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-04-01libipa: camera_sensor_helper: Add IMX296 helperLaurent Pinchart
The IMX296 is a Sony sensor that expresses its gain in 0.1dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Add IMX290 helperLaurent Pinchart
The IMX290 is a Sony sensor that expresses its gain in 0.3dB units. It thus maps to the exponential gain model. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Implement exponential gain modelLaurent Pinchart
The CameraSensorHelper specifies two gain models, linear and exponential. They are modelled after the MIPI CCS specification. Only the linear model has been implemented, the exponential model was left for later. We now need to support sensors that configure their gain in a hardware register with a value expressed in dB. This has similarities with the MIPI CCS exponential gain model, but is only has an exponential factor, while CCS also allows sensors to support a configurable linear factor. The full CCS exponential model needs two values (for the linear and exponential factors) to express a gain, while IPAs use a single linear gain value internally. However, the exponential gain model example in the CCS specification has a fixed linear factor, which may indicate that it could be common for sensors that implement the exponential gain model to only use the exponential factor. For this reason, implement the exponential gain model with a fixed linear factor, but with a sensor-specific coefficient for the exponential factor that allows expressing the gain in dB (or other logarithmical units) instead of limiting it to powers of 2 as in the MIPI CCS specification. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-04-01libipa: camera_sensor_helper: Reorganize gain constantsLaurent Pinchart
To prepare for other gain models than the linear model, store the gain constants in a union with per-model members. Due to the lack of designated initializer support in gcc with C++17, initializing a single complex structure that includes a union will be difficult. Split the gain model type to a separate variable to work around this issue. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-03-28ipa: libipa: Histogram: Constify the constructor spanJean-Michel Hautbois
The Histogram constructor does not modify the data. Pass it a Span<const uint32_t> instead of a Span<uint32_t>. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-03-17libipa: Add CameraSensorHelper for OV2740Daniel Scally
The datasheet for the OV2740 gives 0x80 as 1x gain, so real gain is GainCode / 128. Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-29ipa: libipa: Introduce Algorithm class templateJean-Michel Hautbois
The algorithms are using the same function names with specialized parameters. Instead of duplicating code, introduce a libipa Algorithm class which implements a base class with template parameters in libipa, and use it in each IPA. As we now won't need an algorithm class for each IPA, move the documentation to libipa, and make it agnostic of the IPA used. While at it, fix the IPU3::Algorithm::Awb documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-29libipa: Correct IMX219 in CameraSensorHelperJean-Michel Hautbois
The equation is badly reported in the CameraSensorHelper, as m1 and c0 are inverted. Correct it to have a proper gain calculation. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-11-24ipa: libipa: Convert to pragma onceKieran Bingham
Remove the verbose #ifndef/#define/#endif pattern for maintaining header idempotency, and replace it with a simple #pragma once. This simplifies the headers, and prevents redundant changes when header files get moved. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-08-31ipa: libipa: histogram: Fix typoLaurent Pinchart
"weighted", derived from the verb "to weight", comes from Middle English weight, weiȝte, weght, wight, from Old English wiht, ġewiht, from Proto-Germanic *wihtiz, from Proto-Indo-European *weǵʰ-. In none of those does the t come before the h. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-08-20ipa: move libipa::Algorithm to ipa/ipu3/algorithmsJean-Michel Hautbois
The abstract Algorithm class was originally placed in libipa as an attempt define a generic algorithm container. This was a little optimistic and pushed a bit far too early. Move the Algorithm class into the IPU3 which is the only user of the class, as we adapt it to support modular algorithm components for the IPU3. Not documenting the namespace may cause issues with Doxygen in libipa. The file libipa.cpp is thus created as an empty file for now, but we can leverage it in the future to add more global libipa documentation, and possibly code too. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-08-09libcamera: Rename 'method' to 'function'Laurent Pinchart
Usage of 'method' to refer to member functions comes from Java. The C++ standard uses the term 'function' only. Replace 'method' with 'function' or 'member function' through the whole code base and documentation. While at it, fix two typos (s/backeng/backend/). The BoundMethod and Object::invokeMethod() are left as-is here, and will be addressed separately. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-25libipa: Add CameraSensorHelper for ov8865Daniel Scally
Add a CameraSensorHelperOv8865 class. The gain coefficients are gleaned from the datasheet; the lowest 7 bits are reported there as fractional bits, so real gain is val/128. Signed-off-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-23libipa: Add CameraSensorHelper for IMX258Umang Jain
Extend the CameraSensorHelper factory with support for the IMX258 sensor found in the Nautilus Chromebook. The values are read by manually tweaking the IMX258 kernel driver. The IMX258 kernel driver hints that the sensor may be compatible with the MIPI CCS specification, as the register set matches. The values for analog gain constants are obtained by reading the register indexes, corresponding to the analog gain constants, as mentioned in MIPI CCS v1.1 specification. The values have further been confirmed by Dave Stevenson as being those specified in the datasheet. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-07-15libipa: Correct OV5670 CameraSensorHelper gain valuesJean-Michel Hautbois
The datasheet states that the low 7 bits are fraction bits. real_gain = GainCode/128 For example, 0x080 is 1x gain, 0x100 is 2x gain. It means that we should have m0=1 and c1=128. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-15libipa: Add CameraSensorHelper for OV13858Jean-Michel Hautbois
Extend the CameraSensorHelper factory with support for an OV13858 sensor as found in the Soraka Chromebook. The datasheet states that low 7 bits are fraction bits, so the gain is calculated as gainCode=128*gain. According to the formula, it means m0=1 and c1=128. m1 then has to be 0, and c0=0. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-07-09ipa: libipa: Fixups in CameraSensorHelpersJean-Michel Hautbois
A few lines needed to be wrapped under 80 lines. Remove some unneeded documentation and minor typos. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-06-28ipa: Create a camera sensor helper classJean-Michel Hautbois
For various sensor operations, it may be needed to do sensor specific computations, like analogue gain or vertical blanking. This commit introduces a new camera sensor helper in libipa which aims to solve this specific issue. It is based on the MIPI alliance Specification for Camera Command Set and implements, for now, only the analogue "Global gain" mode. Setting analogue gain for a specific sensor is not a straightforward operation, as one needs to know how the gain is calculated for it. Three helpers are created in this patch: imx219, ov5670 and ov5693. Adding a new sensor is pretty straightforward as one only needs to implement the sub-class for it and register that class to the CameraSensorHelperFactory. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-06-25libcamera/base: Validate internal headers as privateKieran Bingham
Headers which must not be exposed as part of the public libcamera API should include base/private.h. Any interface which includes the private.h header will only be able to build if the libcamera_private dependency is used (or the libcamera_base_private dependency directly). Build targets which are intended to use the private API's will use the libcamera_private to handle the automatic definition of the inclusion guard. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move span to base libraryKieran Bingham
Move span, and adjust the Doxygen exclusion as well. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-06-25libcamera/base: Move extended base functionalityKieran Bingham
Move the functionality for the following components to the new base support library: - BoundMethod - EventDispatcher - EventDispatcherPoll - Log - Message - Object - Signal - Semaphore - Thread - Timer While it would be preferable to see these split to move one component per commit, these components are all interdependent upon each other, which leaves us with one big change performing the move for all of them. Reviewed-by: Hirokazu Honda <hiroh@chromium.org> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: ipu3: Add a histogram classJean-Michel Hautbois
This class will be used at least by AGC algorithm when quantiles are needed for example. It stores a cumulative frequency histogram. Going from cumulative frequency back to per-bin values is a single subtraction, while going the other way is a loop. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-04-22ipa: Add a common interface for algorithm objectsJean-Michel Hautbois
In order to instantiate and use algorithms (AWB, AGC, etc.) there is a need for a common class to define mandatory methods. Instead of reinventing the wheel, reuse what Raspberry Pi has done and adapt to the minimum requirements expected. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-02-16libcamera: IPAInterface: Replace C API with the new C++-only APIPaul Elder
Remove everything related to the C API, including ipa_context, ipa_context_wrapper, and IPAInterfaceWrapper. Also remove relevant documentation. ipaCreate() provided by IPA implementations, and createInterface() provided by IPAModule (wrapper around IPA implementation) both now return a C++ object IPAInterface instead of struct ipa_context. Although IPAInterfaceWrapper is the only component of libipa, the skeleton and build files for libipa are retained. After converting the C API to the C++-only API, make all pipeline handlers and IPAs use the new API. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- This is a combination of 21 commits: --- libcamera: IPAModule: Replace ipa_context with IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate_() and createInterface() return IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: ipa_context_wrapper: Remove ipa_context_wrapper Since ipa_context has been replaced with custom IPAInterfaces, it is not longer needed. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: remove ipa_context and functions from documentation Remove all the documentation related to ipa_context and the C IPA API, as well as the documentation about the functions in the IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAInterface: Remove all functions from IPAInterface Now that all the functions in the IPA interface are defined in the data definition file and a specialized IPAInterface is generated per pipeline handler, remove all the functions from the base IPAInterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAInterface: make ipaCreate return IPAInterface With the new IPC infrastructure, we no longer need the C interface as provided by struct ipa_context. Make ipaCreate return IPAinterface. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- ipa: remove IPAInterfaceWrapper As every pipeline has its own proxy, IPAInterfaceWrapper is no longer necessary. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> --- libcamera: IPAProxy: Remove stop() override Since stop() is part of the IPA interface, and the IPA interface is now generated based on the data definition file per pipeline, this no longer needs to be overrided by the base IPAProxy. Remove it. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy, IPAManager: Switch to one-proxy-per-pipeline scheme IPAProxy is changed in two major ways: - Every pipeline has its own proxy, to support each pipeline's IPA interface - IPAProxy implementations always encapsulate IPA modules, and switch internally for isolation or threaded The IPAProxy registration mechanism is removed, as each pipeline will have its own proxy, so the pipeline can pass the specialized class name of the IPAProxy to the IPAManager for construction. IPAManager is changed accordingly to support these changes: - createIPA is a template function that takes an IPAProxy class, and always returns an IPAProxy - IPAManager no longer decides on isolation, and simply creates an IPAProxy instance while passing the isolation flag Consequently, the old IPAProxy classes (IPAProxyThread and IPAProxyLinux) are removed. The IPAInterfaceTest is updated to use the new IPAManager interface, and to construct a ProcessManager as no single global instance is created anymore. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> --- libcamera: IPAProxy: Add isolate parameter to create() Since IPAProxy implementations now always encapsulate IPA modules, add a parameter to create() to signal if the proxy should isolate the IPA or not. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Fetch IPAProxy corresponding to pipeline Now that each pipeline handler has its own IPAProxy implementation, make the IPAManager fetch the IPAProxy based on the pipeline handler name. Also, since the IPAProxy is used regardless of isolation or no isolation, remove the isolation check from the proxy selection. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> --- libcamera: IPAManager: add isolation flag to proxy creation When the IPA proxy is created, it needs to know whether to isolate or not. Feed the flag at creation of the IPA proxy. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAManager: Make createIPA return proxy directly Since every pipeline knows the type of the proxy that it needs, and since all IPAs are to be wrapped in a proxy, IPAManager no longer needs to search in the factory list to fetch the proxy factory to construct a factory. Instead, we define createIPA as a template function, and the pipeline handler can declare the proxy type when it calls createIPA. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: IPAProxy: Remove registration mechanism Implementations of IPA proxies use a registration mechanism to register themselves with the main IPA proxy factory. This registration declares static objects, causing a risk of things being constructed before the proper libcamera facilities are ready. Since each pipeline handler has its own IPA proxy and knows the type, it isn't necessary to have a proxy factory. Remove it to alleviate the risk of early construction. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: proxy: Remove IPAProxyLinux and IPAProxyThread We have now changed the proxy from per-IPC mechanism to per-pipeline. The per-IPC mechanism proxies are thus no longer needed; remove them. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- tests: ipa_interface_test: Update to use new createIPA Update the IPA interface test to use the new createIPA function from IPAManager. Also create an instance of ProcessManager, as no single global instance is created automatically anymore. Update meson.build to to depend on the generated IPA interface headers. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: PipelineHandler: Remove IPA from base class Since pipeline handlers now have their own IPA interface types, it can no longer be defined in the base class, and each pipeline handler implementation must declare it and its type themselves. Remove it from the base class. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- ipa: raspberrypi: Add mojom data definition file Add a mojom data definition for raspberrypi pipeline handler's IPAs. This simplifies the API between the raspberrypi pipeline handler and the IPA, and is not a direct translation of what was used before with IPAOperationData. Also move the enums from raspberrypi.h to raspberrypi.mojom Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: raspberrypi: Use new data definition Now that we can generate custom functions and data structures with mojo, switch the raspberrypi pipeline handler and IPA to use the custom data structures as defined in the mojom data definition file. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: vimc: Support the new IPC mechanism Add support to vimc pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> --- libcamera: pipeline, ipa: rkisp1: Support the new IPC mechanism Add support to the rkisp1 pipeline handler and IPA for the new IPC mechanism. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> --- libcamera: pipeline, ipa: ipu3: Support the new IPC mechanism Add support to ipu3 pipeline handler and IPA for the new IPC mechanism. [Original version] Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> [Fixed commit message and small changes] Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-12-08libcamera: ipa: Pass a set of controls and return results from ipa::start()Naushir Patuck
This change allows controls passed into PipelineHandler::start to be forwarded onto IPAInterface::start(). We also add a return channel if the pipeline handler must action any of these controls, e.g. setting the analogue gain or shutter speed in the sensor device. The IPA interface wrapper isn't addressed as it will soon be replaced by a new mechanism to handle IPC. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-07-17libcamera: ipa_interface: Add support for custom IPA data to configure()Laurent Pinchart
Add two new parameters, ipaConfig and result, to the IPAInterface::configure() function to allow pipeline handlers to pass custom data to their IPA, and receive data back. Wire this through the code base. The C API interface will be addressed separately, likely through automation of the C <-> C++ translation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move IPA headers from include/ipa/ to include/libcamera/ipa/Laurent Pinchart
The IPA headers are installed into $prefix/include/libcamera/ipa/, but are located in the source tree in include/ipa/. This requires files within libcamera to include them with #include <ipa/foo.h> while a third party IPA would need to use #include <libcamera/ipa/foo.h> Not only is this inconsistent, it can create issues later if IPA headers need to include each other, as the first form of include directive wouldn't be valid once the headers are installed. Fix the problem by moving the IPA headers to include/libcamera/ipa/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-16libcamera: Move internal headers to include/libcamera/internal/Laurent Pinchart
The libcamera internal headers are located in src/libcamera/include/. The directory is added to the compiler headers search path with a meson include_directories() directive, and internal headers are included with (e.g. for the internal semaphore.h header) #include "semaphore.h" All was well, until libcxx decided to implement the C++20 synchronization library. The __threading_support header gained a #include <semaphore.h> to include the pthread's semaphore support. As include_directories() adds src/libcamera/include/ to the compiler search path with -I, the internal semaphore.h is included instead of the pthread version. Needless to say, the compiler isn't happy. Three options have been considered to fix this issue: - Use -iquote instead of -I. The -iquote option instructs gcc to only consider the header search path for headers included with the "" version. Meson unfortunately doesn't support this option. - Rename the internal semaphore.h header. This was deemed to be the beginning of a long whack-a-mole game, where namespace clashes with system libraries would appear over time (possibly dependent on particular system configurations) and would need to be constantly fixed. - Move the internal headers to another directory to create a unique namespace through path components. This causes lots of churn in all the existing source files through the all project. The first option would be best, but isn't available to us due to missing support in meson. Even if -iquote support was added, we would need to fix the problem before a new version of meson containing the required support would be released. The third option is thus the only practical solution available. Bite the bullet, and do it, moving headers to include/libcamera/internal/. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org>
2020-05-13licenses: License all meson files under CC0-1.0Laurent Pinchart
In an attempt to clarify the license terms of all files in the libcamera project, the build system files deserve particular attention. While they describe how the binaries are created, they are not themselves transformed into any part of binary distributions of the software, and thus don't influence the copyright on the binary packages. They are however subject to copyright, and thus influence the distribution terms of the source packages. Most of the meson.build files would not meet the threshold of originality criteria required for copyright protection. Some of the more complex meson.build files may be eligible for copyright protection. To avoid any ambiguity and uncertainty, state our intent to not assert copyrights on the build system files by putting them in the public domain with the CC0-1.0 license. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Acked-by: Naushir Patuck <naush@raspberrypi.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Acked-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Acked-by: Paul Elder <paul.elder@ideasonboard.com> Acked-by: Show Liu <show.liu@linaro.org>
2020-04-28libcamera: ipa: Add support for CameraSensorInfoJacopo Mondi
Add support for camera sensor information in the libcamera IPA protocol. Define a new 'struct ipa_sensor_info' structure in the IPA context and use it to perform translation between the C and the C++ API. Update the IPAInterface::configure() operation to accept a new CameraSensorInfo parameter and port all users of that function to the new interface. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-28ipa: Pass IPA initialization settings to IPAInterface::init()Laurent Pinchart
Add a new IPASettings class to pass IPA initialization settings through the IPAInterface::init() method. The settings currently only contain the name of a configuration file, and are expected to be extended later. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2020-04-14ipa: Add start() and stop() operationsNiklas Söderlund
Add two new operations to the IPA interface to start and stop it. The intention is that these functions shall be used by the IPA to perform actions when the camera is started and stopped. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2020-01-14libcamera: Switch from utils::make_unique to std::make_uniqueLaurent Pinchart
Now that we're using C++-14, drop utils::make_unique for std::make_unique. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
2020-01-12ipa: Switch to FrameBuffer interfaceNiklas Söderlund
Switch the IPA interfaces and implementations to use the Framebuffer interface. - The IPA interface is switched to use the simpler FrameBuffer::Plane container when carrying dmabuf descriptions (fd and length) over the pipeline/IPA boundary. - The RkISP1 IPA implementation takes advantage of the new simpler and safer (better control over file descriptors) FrameBuffer interface. Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2019-11-20ipa: Allow short-circuiting the ipa_context_opsLaurent Pinchart
When an IPA module is loaded without isolation and implements the IPAInterface internally, going through ipa_context_ops is a waste of time. Add an operation to retrieve the IPAInterface, and use it directly in the IPAContextWrapper. For debugging purpose, make it possible to forcing usage of the C API by defining the LIBCAMERA_IPA_FORCE_C_API environment variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2019-11-20ipa: Switch to the plain C APIJacopo Mondi
Switch IPA communication to the plain C API. As the IPAInterface class is easier to use for pipeline handlers than a plain C API, retain it and add an IPAContextWrapper that translate between the C++ and the C APIs. On the IPA module side usage of IPAInterface may be desired for IPAs implemented in C++ that want to link to libcamera. For those IPAs, a new IPAInterfaceWrapper helper class is introduced to wrap the IPAInterface implemented internally by the IPA module into an ipa_context, ipa_context_ops and ipa_callback_ops. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>