summaryrefslogtreecommitdiff
path: root/src/ipa/ipu3/algorithms
AgeCommit message (Collapse)Author
2022-05-18ipa: ipu3: Put IPAFrameContext(s) in a ring bufferUmang Jain
Instead of having one frame context constantly being updated, this patch aims to introduce per-frame IPAFrameContext which are stored in a ring buffer. Whenever a request is queued, a new IPAFrameContext is created and inserted into the ring buffer. The IPAFrameContext structure itself has been slightly extended to store a frame id and a ControlList for incoming frame controls (sent in by the application). The next step would be to read and set these controls whenever the request is actually queued to the hardware. Since now we are working in multiples of IPAFrameContext, the Algorithm::process() will actually take in a IPAFrameContext pointer (as opposed to a nullptr while preparing for this change). Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18ipa: libipa: Add frame context pointer in process()Umang Jain
Currently we have a single structure of IPAFrameContext but subsequently, we shall have a ring buffer (or similar) container to keep IPAFrameContext structures for each frame. It would be a hassle to query out the frame context required for process() (since they will reside in a ring buffer) by the IPA for each process. Hence, prepare the process() libipa template to accept a particular IPAFrameContext early on. As for this patch, we shall pass in the pointer as nullptr, so that the changes compile and keep working as-is. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-18ipa: ipu3: Rework IPAFrameContextUmang Jain
Currently, IPAFrameContext consolidates the values computed by the active state of the algorithms, along with the values applied on the sensor. Moving ahead, we want to have a frame context associated with each incoming request (or frame to be captured). This shouldn't necessarily be tied to "active state" of the algorithms hence: - Rename current IPAFrameContext -> IPAActiveState This will now reflect the latest active state of the algorithms and has nothing to do with any frame-related ops/values. - Re-instate IPAFrameContext with a sub-structure 'sensor' currently storing the exposure and gain value. Adapt the various access to the frame context to the new changes as described above. Subsequently, the re-instated IPAFrameContext will be extended to contain a frame number and ControlList to remember the incoming request controls provided by the application. A ring-buffer will be introduced to store these frame contexts for a certain number of frames. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-14ipa: ipu3: af: A not initialized frame ignore counter fixingKate Hsuan
A not initialized frame ignore counter (ignoreCounter_) makes the AF function not work since the ignore counter may start from a random negative number. The counter was set to kIgnoreFrame when AF is in prepare stage. Signed-off-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Simplify accumulations of y_itemsKieran Bingham
Simplify the accumulation of the total and variance with a ternary operator. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use Span for y_table_item_tKieran Bingham
Convert the y_table_item_t to a Span and use that for iteration when estimating variance of the table. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-04-09ipa: ipu3: af: Remove redundant memcpyKieran Bingham
The af statistics can be accessed directly from the mapped buffer. Remove the redundant memcpy, and simplify the call to afEstimateVariance(). Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Use geometry classes to perform grid centeringKieran Bingham
Use our geometry classes for Rectangle, Size and Point to identify the region of interest for the autofocus, and center it on the BDS output. This will facilitate custom ROI being passed in through controls at a later time. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: Move constants to implementationKieran Bingham
A selection of constants are imported from ChromiumOS. Move these out of the header, and simplify their documentation. Further more, add a direct reference to the location they were obtained from. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kate Hsuan <hpa@redhat.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-04-09ipa: ipu3: af: enforce grid size restrictionsKieran Bingham
Provide enforcement of the selection of the block_{width,height}_log2 parameters to the capabilities of the hardware. While this selection is currently hardcoded to the minimum, providing the restriction now allows for further dynamic sizing in the future and documents the restrictions directly in code, making use of the already existing constants. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Use existing local short-hand variable in configure()Laurent Pinchart
The configure() function has a local configuration variable referencing context.configuration for the purpose of shortening lines. Use it instead of context.configuration in the remaining locations, and constify it while at it as the configuration isn't meant to be modified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-17ipa: ipu3: agc: Reset frame count when configuring AGCLaurent Pinchart
The frame count is used to skip the gain and exposure filtering when starting. It thus needs to be reset when configuring the algorithm, to avoid slower convergence when stopping and restarting. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-15ipa: ipu3: af: Auto focus for dw9719 Surface Go2 VCMKate Hsuan
Since VCM for surface Go 2 (dw9719) had been successfully driven, this Af module can be used to control the VCM and determine the focus value based on the IPU3 AF state. Based on the values from the IPU3 AF buffer, the variance of each focus step is determined and a greedy approach is used to find the maximum variance of the AF state and an appropriate focus value. The grid configuration is implemented as a context. Also, the grid parameter- AF_MIN_BLOCK_WIDTH is set to 4 (default is 3) since if the default value is used, x_start (x_start > 640) will be at an incorrect location of the image (rightmost of the sensor). Signed-off-by: Kate Hsuan <hpa@redhat.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-03-11ipa: ipu3: awb: Clamp gain valuesJean-Michel Hautbois
The gain values are coded as u3.13 fixed point values, ie they can not be more than 8. Clamp the values in order to avoid any off limits value which could make the IPU3 behave in a weird manner. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: agc: Introduce lineDuration in IPASessionConfigurationJean-Michel Hautbois
Instead of having a local cached value for line duration, store it in the IPASessionConfiguration::sensor structure. While at it, configure the default analogue gain and shutter speed to controlled fixed values. The latter is set to be 10ms as it will in most cases be close to the one needed, making the AGC faster to converge. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2022-03-11ipa: ipu3: Return filtered valueJean-Michel Hautbois
When the current exposure value is calculated, it is cached and used by filterExposure(). Use private filteredExposure_ and pass currentExposure as a parameter. In order to limit the use of filteredExposure_, return the value from filterExposure(). While at it, remove a stale comment. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
2021-12-07libcamera: Use utils::abs_diff()Laurent Pinchart
Use the new utils::abs_diff() function where appropriate to replace manual implementations. While at it fix a header ordering issue in src/libcamera/pipeline/raspberrypi/raspberrypi.cpp. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-29ipa: libipa: Introduce Algorithm class templateJean-Michel Hautbois
The algorithms are using the same function names with specialized parameters. Instead of duplicating code, introduce a libipa Algorithm class which implements a base class with template parameters in libipa, and use it in each IPA. As we now won't need an algorithm class for each IPA, move the documentation to libipa, and make it agnostic of the IPA used. While at it, fix the IPU3::Algorithm::Awb documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-24ipa: ipu3: Convert to pragma onceKieran Bingham
Remove the verbose #ifndef/#define/#endif pattern for maintaining header idempotency, and replace it with a simple #pragma once. This simplifies the headers, and prevents redundant changes when header files get moved. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Saturate the averages when computing relative luminanceLaurent Pinchart
The relative luminance is calculated using an iterative process to account for saturation in the sensor, as multiplying pixels by a gain doesn't increase the relative luminance by the same factor if some regions are saturated. Relative luminance estimation doesn't apply a saturation, which produces a value that doesn't match what the sensor will output, and defeats the point of the iterative process. Fix it. Fixes: f8f07f9468c6 ("ipa: ipu3: agc: Improve gain calculation") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Return the inter-quantile mean from measureBrightness()Laurent Pinchart
The inter-quantile mean is a value that is computed as part of the AGC run. It doesn't need to be stored in a member variable. Return it from measureBrightness(), which makes the flow of data easier to follow. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Rename currentYGainLaurent Pinchart
The "current" prefix in the currentYGain variable name is confusing: - In Agc::estimateLuminance(), the variable contains the gain to be applied to the image, which is neither a "current" gain nor a "Y" gain. Rename it to "gain". - In Agc::computeExposure(), the variable contains the gain computed by the relative luminance method, so rename it to "yGain". While at it, rename variables to match the libcamera coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Standardize vocabulary on "relative luminance"Laurent Pinchart
The AGC computes the average relative luminance of the frame and calls the value "normalized luma", "brightness" or "initialY". The latter is the most accurate term, as the relative luminance is abbreviated Y, but the "initial" prefix isn't accurate. Standardize the vocabulary on "relative luminance" in code and comments, abbreviating it to Y when needed. While at it, rename variables to match the libcamera coding style. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-23ipa: ipu3: agc: Drop kMaxLuminance constantLaurent Pinchart
The kMaxLuminance constant is badly named, it's not a maximum luminance, but the maximum integer value output by the AWB statistics engine for per-channel averages. The constant is used in a single place, hardcoding the value is actually more readable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-16ipa: ipu3: agc: Remove the threshold for the histogram calculationJean-Michel Hautbois
Until commit f8f07f9468c6 (ipa: ipu3: agc: Improve gain calculation) the gain to apply on the exposure value was only using the histogram. Now that the global brightness of the frame is estimated too, we don't need to remove part of the saturated pixels from the equation anymore. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-11-15ipa: ipu3: awb: Add support for color temperatureJean-Michel Hautbois
The AWB estimates the color temperature, but it is not used at all. It can be useful for debug purpose at least, but also for lux estimation later, to be able to know the temperature estimated for a given frame. Add a new member to the IPAFrameContext::awb for this purpose, and update the value in AWB. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Store exposure in units of timeJean-Michel Hautbois
The minimum and maximum exposure are stored in lines. Replace it by values in time to simplify the calculations. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Update previous exposure valueJean-Michel Hautbois
Previously, the exposure value was calculated based on the estimated shutter time and gain applied. Now that we have the real values for the current frame, use those before estimating the next one and rename the variable accordingly. As the exposure value is updated in the beginning of the computation, there is no need to initialize effectiveExposureValue anymore in the configure call, and it can be a local variable and not a class variable anymore. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Improve gain calculationJean-Michel Hautbois
When an image is partially saturated, its brightness is not increasing linearly when the shutter time or gain increases. It is a big issue with a backlight as the algorithm is fading to darkness right now. Introduce a function to estimate the brightness of the frame, based on the current exposure/gain and loop on it several times to estimate it again and approach the non linear function. Inspired-by: 7de5506c30b3 ("libcamera: src: ipa: raspberrypi: agc: Improve gain update calculation for partly saturated images") Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Refactor ev gain calculation and testingJean-Michel Hautbois
When we compute the new gain, we use the iqMean_ and estimate an exposure value gain to apply. Return early when the gain is less than 1%. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Compute the gain for each frameJean-Michel Hautbois
Now that we have the real exposure applied at each frame, remove the early return based on a frame counter and compute the gain for each frame. Introduce a number of startup frames during which the filter speed is 1.0, meaning we apply instantly the exposure value calculated and not a slower filtered one. This is used to have a faster convergence, and those frames may be dropped in a future development to hide the convergance process from the viewer. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: agc: Limit the number of saturated cellsJean-Michel Hautbois
When the histogram is calculated, we check if a cell is saturated or not before cumulating its green value. This is wrong, and it can lead to an empty histogram in case of a fully saturated frame. Use a constant to limit the amount of pixels within a cell before considering it saturated. If at the end of the loop we still have an empty histogram, then make it a fully saturated one. Bug: https://bugs.libcamera.org/show_bug.cgi?id=84 Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-11-15ipa: ipu3: Use sensor controls to update frameContextJean-Michel Hautbois
The pipeline handler populates the new sensorControls ControlList, to have the effective exposure and gain values for the current frame. This is done when a statistics buffer is received. Make those values the frameContext::sensor values for the frame when the EventStatReady event is received. AGC also needs to use frameContext.sensor as its input values and frameContext.agc as its output values. Modify computeExposure by passing it the frameContext instead of individual exposure and gain values. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2021-10-26ipa: ipu3: agc: Clamp shutter speedJean-Michel Hautbois
In case the maximum exposure received from the sensor is very high, we can have a very high shutter speed with a small analogue gain, and it may result in very slow framerate. We are not really supporting it for the moment, so clamp the shutter speed to an arbitrary value of 60ms. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: algorithms: awb: Privatize internal structuresKieran Bingham
The struct RGB and struct AwbStatus are used only by the internal implementation of the AWB algorithm module. Move them into the private class declaration. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-10-26ipa: ipu3: Fix the IPU3 AWB doxygen referencesKieran Bingham
The AWB AwbStatus structure is contained within the Awb class. Fix the Doxygen reference so that it can be found. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
2021-10-26ipa: ipu3: tonemapping: Add the documentation for ToneMappingJean-Michel Hautbois
The tone mapping algorithm is currently undocumented. Provide an introduction and overview to the implementation as the class definition and document how the algorithm operates in the process and prepare methods. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: tonemapping: Implement configure callJean-Michel Hautbois
Let the algorithm perform its initial configuration. Implement configure() to set a default gamma value and let process do the updates needed. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: tonemapping: Generate the LUT only on gamma changeJean-Michel Hautbois
The tone mapping algorithm calculates the gamma curve for every frame, regardless of whether the gamma value has changed or not. This issue is exasperated as we currently hardcode the gamma to a single value. Optimise the implementation to only recalculate the look up table when the gamma setting is changed, and store the gamma setting of the LUT curve as part of the IPA context. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: agc: Document AGC mean-based algorithmJean-Michel Hautbois
The AGC class was not documented while developing. Extend that to reference the origins of the implementation, and improve the descriptions on how the algorithm operates internally. While at it, rename the functions which have bad names. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: awb: Reword accumulator documentationJean-Michel Hautbois
Now that we moved the diagram into the AWB class documentation, reword the accumulator documentation to make it clear it is not meant to be used only in AWB. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-26ipa: ipu3: awb: Add AWB class documentationJean-Michel Hautbois
The AWB algorithm is based on the Grey world algorithm and uses the statistics generated by the ImgU for that. Explain how it uses those, and reference the original algorithm at the same time. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: Use sensor limits for analogue gainJean-Michel Hautbois
Instead of using constants for the analogue gains limits, use the minimum and maximum from the configured sensor. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Remove unused variablesJean-Michel Hautbois
We currently control the exposure value by the shutter speed and the analogue gain. We can't use the digital gain to have more than the maximum exposure value calculated because we are not controlling it. Remove unused code associated with this digital gain. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Refactor condition on exposure correctionJean-Michel Hautbois
Simplify the reading by removing one level of indentation to return early when the change is small between two calls. Reword the LOG() message when we are correctly exposed, and move the lastFrame_ variable to update it even if the change is small. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Introduce previous exposure valueJean-Michel Hautbois
We need to calculate the gain on the previous exposure value calculated. Now that we initialise the exposure and gain values in configure(), we know the initial exposure value, and we can set it before any loop is running. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Rename gains properlyJean-Michel Hautbois
We have mixed terms between gain, analogue gain and the exposure value gain. Make it clear when we are using the analogue gain from the sensor, and when we are using the calculated gain to be applied to the exposure value to reach the target. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Simplify division of exposure/gainJean-Michel Hautbois
Until now, the algorithm makes complex assumptions when dividing the exposure and analogue gain values. Instead, use a simpler clamping of the shutter speed first, and then of the analogue gain, based on the limits configured. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Use filtered exposure valuesJean-Michel Hautbois
We are filtering the exposure value to limit the gain to apply, but we are not using the result. Fix it. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2021-10-22ipa: ipu3: agc: Change analogue gain limitsJean-Michel Hautbois
The gains are currently set as a uint32_t while the analogue gain is passed as a double. We also have a default maximum analogue gain of 15 which is quite high for a number of sensors. Use a maximum value of 8 which should really be configured by the IPA and not fixed as it is now. While at it make it a double. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>