| Age | Commit message (Collapse) | Author |
|---|
|
CameraMetadata stored in requestTemplates_ in CameraDevice is
not necessary to be a raw pointer. This reduces the manual
new/delete code by changing the type to std::unique_ptr.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
staticMetadata_ in CameraDevice is not necessary to be a raw
pointer. This reduces the manual new/delete code by changing the
type to std::unique_ptr.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Camera3RequestDescriptor has a length and an allocated buffer
for camera_stream_buffer_t array. This replaces the variables
with std::vector.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraDevice takes the ownership of Camera. Therefore,
shared_ptr would rather be used than const shared_ptr&.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
CameraDevice is owned by CameraHalManager. The ownership of the
object is not shared with other classes. So CameraHalManager
should manage CameraDevice with std::unique_ptr.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the camera location is not defaulted anymore in the library but
doesn't get registered if the firmware interface does not provide the
information, do not default it to FRONT if LocationExternal is reported.
To maintain compatibility with CTS requirements, default location to
FRONT only if the camera property is not available.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The capture request template for video recording use cases requires
a fixed FPS range. Generate the request templates for the VIDEO_RECORD
and VIDEO_SNAPSHOT capture intents using the preview template and
updating the supported FPS range.
This change fixes the CTS tests
android.hardware.camera2.cts.CameraDeviceTest#testCameraDeviceRecordingTemplate
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera supported FPS range is crucial to distinguish between
capture templates for preview and video recording. If the pipeline
handler did not specify an available FPS range by registering the
controls::FrameDurations property so far the control was simply not
added to the generated capture template.
In order to prepare to generate templates for video recording which
require a fixed FPS range, fail earlier in generating any template at
all if the available FPS range is not provided by the Camera.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current implementation of constructDefaultRequestSettings()
returns the same capture template for all the capture intent.
As the correctness of the generated template is verified by CTS it
is better to return an error for unsupported capture use cases.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The result metadata reports an arbitrary {30, 30} FPS range for the
AE algorithm.
The actual FPS range should be returned in the Request::metadata, but
as libcamera currently does not support that feature temporarily work
around the issue and return the FPS range requested by the camera
framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The request template returned by requestTemplatePreview() uses an
arbitrary {15, 30} Auto-Exposure algorithm FPS range. Use the one
calculated at static metadata creation time, which is consistent with
the camera limits.
Once template generation will be performed inspecting the requested
capture intent, the FPS range over which the AE algorithm can range
shall be tuned accordingly.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Use the FrameDuration control reported by pipeline handlers to register
the Auto-Exposure routine FPS range, the minimum stream frame durations
and the sensor maximum frame duration.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When configuring streams, the camera HAL is supposed to update the
gralloc usage flags to reflect the operations it will need to do on the
stream buffers. Failure to do so leads to incorrect format selection by
gralloc for the HAL_PIXEL_FORMAT_IMPLEMENTATION_DEFINED format, as
gralloc will not take into consideration the need of the camera to
access the buffers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The destination buffer for the post-processing component is
currently first mapped in the CameraDevice class and then passed
to CameraStream which simply calls the post-processor interface.
Move the mapping to CameraStream::process() to tie the buffer
mapping to the lifetime of the CameraBuffer instance.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The buffers passed to the post processor are currently named 'buffer'
and 'mapped', names that do not convey their role.
Use 'src' and 'dest' instead.
Cosmetic change only.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In order to provide support for different memory backends,
move the MappedCamera3Buffer class definition outside of the
CameraDevice class to its own file and rename it in CameraBuffer.
The interface defined in camera_buffer.h will be implemented by
different backends that will be placed in the src/android/mm
subdirectory.
Provide a first implementation for the 'generic android' backend
which matches the existing one.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Our android HAL implementation currently does not support external
cameras, so if the camera location property is external, set it to
front.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.CameraManagerTest#testCameraManagerGetDeviceIdList
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Calculate the JPEG maximum size using the maximum preview format size
multiplied by a 1.5 factor.
The same multiplication factor is used in the existing HAL
implementations in ChromeOS.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE result
metadata.
Report ANDROID_STATISTICS_HOT_PIXEL_MAP_MODE_OFF as the Camera HAL
does not support the generation of an hot pixel correction map.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_SENSOR_TEST_PATTERN_MODE result metadata.
Report the only supported value of ANDROID_SENSOR_TEST_PATTERN_MODE_OFF.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys CTS test
enforces the presence of the auto focus mode in the preview
request template.
Add the only supported mode AF_MODE_OFF in the generated template.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera HAL does currently list AF_MODE_OFF as the only supported
auto-focus mode in the ANDROID_CONTROL_AF_AVAILABLE_MODES static
metadata. For this reason reporting AF_MODE_AUTO as scene override
is wrong.
At the moment scene override is disabled in the Camera HAL, but this
is worth a fix nonetheless.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION result
metadata.
Report 0 as the current value for
ANDROID_CONTROL_AE_EXPOSURE_COMPENSATION in the result metadata
pack.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_COLOR_CORRECTION_ABERRATION_MODE result
metadata.
Report the only supported value of
ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The list of the available thumbnail sizes is generated from the
list of available JPEG resolution, one for each aspect ratio.
This change fixes the CTS test
android.hardware.cts.CameraTest#testJpegThumbnailSize
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix a wrong comment.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current logging to track the status of a Request when running the
Android camera HAL provide the following information:
When a Request is queued to libcamera:
HAL camera_device.cpp:1776 '\_SB_.PCI0.I2C2.CAM0': Queueing Request to libcamera with 1 HAL streams
When a Request completes:
Request request.cpp:268 Request has completed - cookie: 138508601719648
The queueing of a Request reports the number of streams it contains
while the completion of a Request reports the address of the associated
cookie.
This makes very hard to keep track of what Requests have completed, as
the logging associated with a queue/complete event does not allow to identify
a Request easily.
Add two more printouts to make it easier to track a Request life cycle.
To make it possible to print the Request cookie in the CameraDevice
class add a method to access it from the CameraRequest class.
The result looks like the following trace:
Request request.cpp:92 Created request - cookie: 140701719392768
HAL camera_device.cpp:1710 '\_SB_.PCI0.I2C2.CAM0': Queueing request 140701719392768 with 1 streams
HAL camera_device.cpp:1747 '\_SB_.PCI0.I2C2.CAM0': 0 - (4160x3104)[0x00000023] -> (4160x3104)[NV12] (direct)
...
Request request.cpp:268 Request has completed - cookie: 140701719392768
HAL camera_device.cpp:1800 '\_SB_.PCI0.I2C2.CAM0': Request 140701719392768 completed with 1 streams..
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In preparation to use the keys part of a capture request to
fill in the result metadata, create a reference to
descriptor_->settings_.
While at it, move the 'ret' variable declaration to the beginning of
the function and rename it in 'found', as it will be used in many
places and move the \todo comment up as it applies to all metadata
whose value is copied from settings.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera HAL does not report all the Request keys which are
mandatory for the advertised BACKWARD_COMPATIBLE capabilities
level. Add them.
This fixes the CTS test:
android.hardware.camera2.cts.StaticMetadataTest#testCapabilities
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The vectors of available characteristics, request and result keys
are not sorted. This makes more complex than necessary spotting
duplication of keys.
Re-sort the vectors initializer lists alphabetically.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ExposureTime libcamera control is in microseconds while android and
our exif component use nanoseconds. Convert it appropriately.
CTS also expects the ExposureTime exif tag to match the ExposureTime set
in the android result metadata. Fix it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Set the AE precapture triggler tag in the android result metadata
according to what was passed in the request metadata.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.StillCaptureTest#testAePrecaptureTriggerCancelJpegCapture
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The settings in an android capture request may be null, in which case
the settings from the most recently submitted capture request should be
used. Cache the request settings to achieve this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Configure the thumbnailer based on the thumbnail parameters given by the
android request metadata. Only the thumbnail encoder needs to be
configured, and since it is only used at post-processing time, move the
configuration out of the post-processor constructor and into the
processing step.
Also set the following android result metadata tags:
- ANDROID_JPEG_THUMBNAIL_SIZE
- ANDROID_JPEG_THUMBNAIL_QUALITY
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Set the following android result metadata:
- ANDROID_LENS_FOCAL_LENGTH
- ANDROID_LENS_APERTURE
- ANDROID_JPEG_GPS_TIMESTAMP
- ANDROID_JPEG_GPS_COORDINATES
- ANDROID_JPEG_GPS_PROCESSING_METHOD
And the following EXIF fields:
- GPSDatestamp
- GPSTimestamp
- GPSLocation
- GPSLatitudeRef
- GPSLatitude
- GPSLongitudeRef
- GPSLongitude
- GPSAltitudeRef
- GPSAltitude
- GPSProcessingMethod
- FocalLength
- ExposureTime
- FNumber
- ISO
- Flash
- WhiteBalance
- SubsecTime
- SubsecTimeOriginal
- SubsecTimeDigitized
Based on android request metadata.
This allows the following CTS tests to pass:
- android.hardware.camera2.cts.StillCaptureTest#testFocalLengths
- android.hardware.camera2.cts.StillCaptureTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In ChromeOS the camera make and model is saved in
/var/cache/camera/camera.prop. Load and save these values at
construction time, if available.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The list of dynamic metadata reported by the Camera HAL is currently
very limited.
Augment the number of reported metadata in order to fix errors
reported by the android.hardware.camera2.cts.CaptureRequestTest test
module.
The test module still fails in 2 tests because of the missing
android.sensor.info.maxFrameDuration static metadata.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Claim support for the AWB_AUTO mode in the
ANDROID_CONTROL_AWB_AVAILABLE_MODES static metadata.
This fixes the CTS test error:
android.hardware.camera2.cts.CaptureRequestTest#testAwbModeAndLock fail
The static info key 'android.control.awbAvailableModes'
All camera devices must support AUTO mode
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Handle the SCALER_CROP_REGION control and dynamic metadata by
translating it from the Android format to the associated libcamera
control when processing a request, and the other way around when
handling a request completion.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM static metadata
inspecting the ScalerCrop control's limits.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of reporting a fake value in the dynamic metadata for the
EXPOSURE_TIME control, use the value provided by the pipeline.
The metadata is only meaningfull in FULL mode.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the EXPOSURE_TIME_RANGE static metadata inspecting the
ExposureTime control limits as reported by the camera.
If such information is not available, do not register the property.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When a Camera3RequestDescriptor instance is created to wrap a
camera3_capture_request_t the settings associated with the request
are cloned for later re-use.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera3_stream_buffer_t instances part of a capture request contain
information on the stream for which capture has been requested (size,
format and fences) and a handle to the stream's memory buffers.
This information is copied in the descriptor one piece at the time while
processing the camera3 streams to be re-used at request completion time.
Simplify the code by copying the stream information in the descriptor
at construction time.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera3RequestDescriptor class can access the number of buffers
and the frame number from the camera3_capture_request_t instead of
having the caller passing them to the constructor.
This change allows to access other fields of the capture request, such
as the capture settings.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the pixel array properties have been defaulted in the
CameraSensor class (or in the pipeline handler, for the UVC use case),
they will always be reported by the libcamera::Camera and there's no
need to default them in the Camera HAL.
Remove defaults and assume properties are always there.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Android camera2 API defines a RAW capture capability ([1]) for
devices that support "outputting RAW buffers and metadata for
interpreting them". This capability requires the camera device to
support RAW_SENSOR ([2]) as an output format. Despite what its name may
sound like, the RAW_SENSOR format is defined as a 16 bits RAW format,
not an opaque implementation-dependent format (which is instead called
RAW_PRIVATE). Devices may additionally support the RAW10 and RAW12
formats, but that isn't enough to claim RAW capture capability.
To comply with the API requirements, only report the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability when 16-bit RAW is
supported.
[1] https://developer.android.com/reference/android/hardware/camera2/CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW
[2] https://developer.android.com/reference/android/graphics/ImageFormat#RAW_SENSOR
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When accessing the value of a property by reading the properties
ControlList content with ControlList::get<>() it is not necessary to
specify the template type as it is already conveyed by the Control
instance provided as first argument.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Conditionally report the ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
property inspecting the draft property reported by the libcamera Camera.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the number of supported output streams through the
ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS static metadata.
The camera HAL currently supports:
- 1 optional RAW stream
- 2 YUV streams
- 1 JPEG stream
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
