| Age | Commit message (Collapse) | Author |
|---|
|
The CaptureResultTest#testCameraCaptureResultAllKeys enforces the
presence of the ANDROID_COLOR_CORRECTION_ABERRATION_MODE result
metadata.
Report the only supported value of
ANDROID_COLOR_CORRECTION_ABERRATION_MODE_OFF.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The list of the available thumbnail sizes is generated from the
list of available JPEG resolution, one for each aspect ratio.
This change fixes the CTS test
android.hardware.cts.CameraTest#testJpegThumbnailSize
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Fix a wrong comment.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current logging to track the status of a Request when running the
Android camera HAL provide the following information:
When a Request is queued to libcamera:
HAL camera_device.cpp:1776 '\_SB_.PCI0.I2C2.CAM0': Queueing Request to libcamera with 1 HAL streams
When a Request completes:
Request request.cpp:268 Request has completed - cookie: 138508601719648
The queueing of a Request reports the number of streams it contains
while the completion of a Request reports the address of the associated
cookie.
This makes very hard to keep track of what Requests have completed, as
the logging associated with a queue/complete event does not allow to identify
a Request easily.
Add two more printouts to make it easier to track a Request life cycle.
To make it possible to print the Request cookie in the CameraDevice
class add a method to access it from the CameraRequest class.
The result looks like the following trace:
Request request.cpp:92 Created request - cookie: 140701719392768
HAL camera_device.cpp:1710 '\_SB_.PCI0.I2C2.CAM0': Queueing request 140701719392768 with 1 streams
HAL camera_device.cpp:1747 '\_SB_.PCI0.I2C2.CAM0': 0 - (4160x3104)[0x00000023] -> (4160x3104)[NV12] (direct)
...
Request request.cpp:268 Request has completed - cookie: 140701719392768
HAL camera_device.cpp:1800 '\_SB_.PCI0.I2C2.CAM0': Request 140701719392768 completed with 1 streams..
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In preparation to use the keys part of a capture request to
fill in the result metadata, create a reference to
descriptor_->settings_.
While at it, move the 'ret' variable declaration to the beginning of
the function and rename it in 'found', as it will be used in many
places and move the \todo comment up as it applies to all metadata
whose value is copied from settings.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera HAL does not report all the Request keys which are
mandatory for the advertised BACKWARD_COMPATIBLE capabilities
level. Add them.
This fixes the CTS test:
android.hardware.camera2.cts.StaticMetadataTest#testCapabilities
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The vectors of available characteristics, request and result keys
are not sorted. This makes more complex than necessary spotting
duplication of keys.
Re-sort the vectors initializer lists alphabetically.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ExposureTime libcamera control is in microseconds while android and
our exif component use nanoseconds. Convert it appropriately.
CTS also expects the ExposureTime exif tag to match the ExposureTime set
in the android result metadata. Fix it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Set the AE precapture triggler tag in the android result metadata
according to what was passed in the request metadata.
This allows the following CTS test to pass:
- android.hardware.camera2.cts.StillCaptureTest#testAePrecaptureTriggerCancelJpegCapture
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The settings in an android capture request may be null, in which case
the settings from the most recently submitted capture request should be
used. Cache the request settings to achieve this.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Configure the thumbnailer based on the thumbnail parameters given by the
android request metadata. Only the thumbnail encoder needs to be
configured, and since it is only used at post-processing time, move the
configuration out of the post-processor constructor and into the
processing step.
Also set the following android result metadata tags:
- ANDROID_JPEG_THUMBNAIL_SIZE
- ANDROID_JPEG_THUMBNAIL_QUALITY
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Set the following android result metadata:
- ANDROID_LENS_FOCAL_LENGTH
- ANDROID_LENS_APERTURE
- ANDROID_JPEG_GPS_TIMESTAMP
- ANDROID_JPEG_GPS_COORDINATES
- ANDROID_JPEG_GPS_PROCESSING_METHOD
And the following EXIF fields:
- GPSDatestamp
- GPSTimestamp
- GPSLocation
- GPSLatitudeRef
- GPSLatitude
- GPSLongitudeRef
- GPSLongitude
- GPSAltitudeRef
- GPSAltitude
- GPSProcessingMethod
- FocalLength
- ExposureTime
- FNumber
- ISO
- Flash
- WhiteBalance
- SubsecTime
- SubsecTimeOriginal
- SubsecTimeDigitized
Based on android request metadata.
This allows the following CTS tests to pass:
- android.hardware.camera2.cts.StillCaptureTest#testFocalLengths
- android.hardware.camera2.cts.StillCaptureTest#testJpegExif
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
In ChromeOS the camera make and model is saved in
/var/cache/camera/camera.prop. Load and save these values at
construction time, if available.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The list of dynamic metadata reported by the Camera HAL is currently
very limited.
Augment the number of reported metadata in order to fix errors
reported by the android.hardware.camera2.cts.CaptureRequestTest test
module.
The test module still fails in 2 tests because of the missing
android.sensor.info.maxFrameDuration static metadata.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Claim support for the AWB_AUTO mode in the
ANDROID_CONTROL_AWB_AVAILABLE_MODES static metadata.
This fixes the CTS test error:
android.hardware.camera2.cts.CaptureRequestTest#testAwbModeAndLock fail
The static info key 'android.control.awbAvailableModes'
All camera devices must support AUTO mode
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Handle the SCALER_CROP_REGION control and dynamic metadata by
translating it from the Android format to the associated libcamera
control when processing a request, and the other way around when
handling a request completion.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM static metadata
inspecting the ScalerCrop control's limits.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of reporting a fake value in the dynamic metadata for the
EXPOSURE_TIME control, use the value provided by the pipeline.
The metadata is only meaningfull in FULL mode.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the EXPOSURE_TIME_RANGE static metadata inspecting the
ExposureTime control limits as reported by the camera.
If such information is not available, do not register the property.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
When a Camera3RequestDescriptor instance is created to wrap a
camera3_capture_request_t the settings associated with the request
are cloned for later re-use.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera3_stream_buffer_t instances part of a capture request contain
information on the stream for which capture has been requested (size,
format and fences) and a handle to the stream's memory buffers.
This information is copied in the descriptor one piece at the time while
processing the camera3 streams to be re-used at request completion time.
Simplify the code by copying the stream information in the descriptor
at construction time.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera3RequestDescriptor class can access the number of buffers
and the frame number from the camera3_capture_request_t instead of
having the caller passing them to the constructor.
This change allows to access other fields of the capture request, such
as the capture settings.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the pixel array properties have been defaulted in the
CameraSensor class (or in the pipeline handler, for the UVC use case),
they will always be reported by the libcamera::Camera and there's no
need to default them in the Camera HAL.
Remove defaults and assume properties are always there.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Android camera2 API defines a RAW capture capability ([1]) for
devices that support "outputting RAW buffers and metadata for
interpreting them". This capability requires the camera device to
support RAW_SENSOR ([2]) as an output format. Despite what its name may
sound like, the RAW_SENSOR format is defined as a 16 bits RAW format,
not an opaque implementation-dependent format (which is instead called
RAW_PRIVATE). Devices may additionally support the RAW10 and RAW12
formats, but that isn't enough to claim RAW capture capability.
To comply with the API requirements, only report the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability when 16-bit RAW is
supported.
[1] https://developer.android.com/reference/android/hardware/camera2/CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW
[2] https://developer.android.com/reference/android/graphics/ImageFormat#RAW_SENSOR
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When accessing the value of a property by reading the properties
ControlList content with ControlList::get<>() it is not necessary to
specify the template type as it is already conveyed by the Control
instance provided as first argument.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Conditionally report the ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
property inspecting the draft property reported by the libcamera Camera.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the number of supported output streams through the
ANDROID_REQUEST_MAX_NUM_OUTPUT_STREAMS static metadata.
The camera HAL currently supports:
- 1 optional RAW stream
- 2 YUV streams
- 1 JPEG stream
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Report the pipeline depth in the capture results if the pipeline
reports it.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The auto keyword facilitates writing code. It avoids typing out very
long types, which can make the code more readable, but it can also have
a negative impact on readability as it requires the reader (including
reviewers) to look up the type of the variable.
Replace one occurrence of auto with the explicit type where doing so
doesn't require a long type name.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The ChromeOS camera service, which is the current main user of the
Android Camera HAL, fails to start if the pixel array properties are
not registered.
As the sensor driver for the Soraka test device have not yet been
updated to report their pixel array properties through the V4L2
selection API, temporary fix the gap by re-establishing the default
properties values removed by commit 1889cdc2e91c ("android: camera_device:
Initialize pixel array properties")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
This reorders Camera3Configs before executing
CameraConfiguration::validate() to make it easier for the Camera
to satisfy the Android framework request.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Add blank line and fix compilation on gcc 7.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the newly introduced Camera3StreamConfig to associate the
Android requested streams with the associated StreamConfiguration
in a vector of configurations.
This change prepares to sort the vector of configuration before using
it to configure the Camera and populate the streams_ vector.
No functional changes intended.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Camera3StreamConfig is a new class to store camera3_stream and
types with associated StreamConfiguration.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The Android camera device HAL3 specification does not require a
camera to go through any explicit close() call between configurations.
It is legitimate for a camera to be configured, a number of requests
processed and then re-configured again without any explicit stop.
The libcamera Android camera HAL starts the Camera at the first handled
request, and only stops it at camera close time. This means that two
camera configuration attempts in the same streaming session are only
interleaved by capture requests handling.
The libcamera::Camera state machine requires the Camera to be stopped
before any configuration take place, and this currently doesn't happen.
Fix this by stopping the camera and the associated worker thread if
a configuration attempt is performed while the Camera is in running
state.
This patch fixes cros_camera_test:
Camera3PreviewTest/Camera3SinglePreviewTest.Camera3BasicPreviewTest/0
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Initialize pixel array properties in the Android camera HAL
inspecting the camera properties.
If the camera does not provide any suitable property, not static
metadata is registered to the Android framework.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Make sure the 'camera3_capture_request_t *' provided to
CameraDevice::processCaptureRequest() is valid before attempting to
access it.
This patch fixes cros_camera_test:
Camera3FrameTest/Camera3InvalidRequestTest.NullOrUnconfiguredRequest/*
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraDevice::getStaticMetadata() function populates the
entries for Android's static metadata by walking the ControlInfo
supported values reported by the libcamera pipeline.
The number of entries to be passed to Android is computed using the
vector's size which is initialized at vector creation time to the
maximum number of available entries.
In order to report the correct number of metadata do not create the
vector with the largest possible number of elements but only reserve
space for them using std::vector::reserve() which does not modify the
vector's size.
This patch fixes cros_camera_test:
Camera3DeviceTest/Camera3DeviceDefaultSettings.ConstructDefaultSettings/1
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
CameraDevice::toPixelFormat() doesn't change the state of the
CameraDevice. Marks it a const function so that it can be called
in const functions.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
std::map::at() searches std::map by the given key. The commit
e1f9fdb8a5bd ("android: camera_device: Remove shadowing FrameBuffer
usage") uses it with 0 to intend to accessing the first element of the
map, but actually access the element whose key is nullptr. This causes
the crash because the map doesn't have the element with nullptr. This
fixes the issue by replacing the std::map::at() operation by
std::map::begin().
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Updated commit message]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Register the ANDROID_STATISTICS_INFO_AVAILABLE_LENS_SHADING_MAP_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Add one entry and reserve in static metadata pack enough space to
support all the 2 available lens shading map modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_COLOR_CORRECTION_AVAILABLE_ABERRATION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 3
available color correction aberration modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_NOISE_REDUCTION_AVAILABLE_NOISE_REDUCTION_MODES
static metadata property inspecting the values retuned by the pipeline
handler.
Reserve in the static metadata pack enough space to support all the 5
available noise reduction modes Android defines.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_REQUEST_PIPELINE_MAX_DEPTH static property
inspecting the value reported by the pipeline handler.
If the Camera does not report any suitable value, default the
static property to 2.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
A FrameBuffer *buffer is used to obtain the 'first' buffer from a
request which is used purely to identify the timestamp from the
metadata in two locations.
Rather than keep the FrameBuffer instance around, which then causes
further usages of FrameBuffers to be shadowed, store the timestamp
locally.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Use the postfixed '_' member variable naming style for the
Camera3RequestDescriptor structure, which in turn ensures that variable
shadowing does not occur in the member initializer list of the
constructor.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Prevent variable shadowing by removing the redeclaration of variables
with the same name (and type) where the existing variable can be reused.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The end semicolons with LOG_DECLARE_CATEGORY and
LOG_DEFINE_CATEGORY are unnecessary.
Signed-off-by: Hirokazu Honda <hiroh@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Port the CameraStream's JPEG-encoding bits to PostProcessorJpeg.
This encapsulates the encoder and EXIF generation code into the
PostProcessorJpeg layer and removes these specifics related to JPEG,
from the CameraStream itself.
Signed-off-by: Umang Jain <email@uajain.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Change-Id: Id9e6e9b2bec83493a90e5e126298a2bb2ed2232a
|
|
Add a CameraWorker class member to the CameraDevice class and
queue capture requests to it to delegate its handling. Start and
stop the CameraWorker when the libcamera::Camera is started or
stopped.
Tie the CaptureRequest lifetime to the Camera3RequestDescriptor's one
by storing it as unique_ptr<> in the descriptor to simplify handling
of request creation and deletion.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Allow reuse of the Request object by implementing reuse(). This means
the applications now have the responsibility of freeing the Request
objects, so make all libcamera users (cam, qcam, v4l2-compat, gstreamer,
android) do so.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
