summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-06-01libcamera: Use "..." instead of <...> consistently for internal headersLaurent Pinchart
libcamera uses double quotes for #include directives for internal headers. A few <...> have found their way in the code base over time. Fix them. While at it, move an Android header include to the right location. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01utils: checkstyle: Ensure "..." include style for internal headersLaurent Pinchart
libcamera uses the "..." include style for internal headers. Enforce it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01utils: checkstyle: Run the CLangFormatter lastLaurent Pinchart
The IncludeOrderFormatter will be extended with more formatting rules that should be applied before clang-format gets run, as it will influence its output. Add a priority mechanism for formatters, and give a negative priority to the CLangFormatter to make it run last. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-01libcamera: Fix incorrect toString() to operator<<() conversionsLaurent Pinchart
Commit 8a845ab078c3 ("libcamera: Replace toString with operator<<() for format classes") incorrectly converted some of the toString() usages, resulting in pointer values being printed instead of formats. Fix it. Fixes: 8a845ab078c3 ("libcamera: Replace toString with operator<<() for format classes") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-27py: Use ln --relative to create symlinksTomi Valkeinen
We create symlinks from the Python bindings build dir to the source dir so that 1) the build dir can be used to use the bindings, and 2) to allow modifications of the source .py files to be used right away without rebuilding. The symlinks were recently fixed and changed to use absolute paths. However, absolute paths ruin one main use case I have: using the bindings from the build dir via nfs from an ARM device. So move back to relative paths, but accomplish this with the --relative parameter for ln, instead of guessing the right relative path as was done before the above-mentioned fix. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Generate bindings for propertiesTomi Valkeinen
Generate bindings for properties in a very similar way as done for controls. We do need to distinguish between the two, and thus I added --properties flag to gen-py-controls.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Rename 'efd' to 'event_fd'Tomi Valkeinen
Perhaps it's better to have a more descriptive name here. I also considered just renaming 'efd' to 'fd', but 'event_fd' won. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Re-structure the controls APITomi Valkeinen
Add ControlInfo class and change the controls related methods to resemble the C++ API (e.g. no more string based control methods). We don't implement ControlList or ControlInfoMap but just expose the same data via standard Python dict. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Re-implement controls genenerationTomi Valkeinen
The Python bindings controls generation was not very good. It only covered the enums and they were in the main namespace. This adds the controls somewhat similarly to the C++ side. We will have e.g.: libcamera.controls.Brightness libcamera.controls.AeMeteringModeEnum.CentreWeighted Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: Convert ctx and state to classesTomi Valkeinen
Convert ctx and state dicts to classes. No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: Drop WA_ShowWithoutActivatingTomi Valkeinen
Drop WA_ShowWithoutActivating from the Qt renderers. I added the flag during development phase as I didn't want the window to take the focus, but it should be removed now. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: MappedFrameBuffer: Add type hints & docsTomi Valkeinen
Add a few type hints and (minimal) docs to MappedFrameBuffer. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Move MappedFrameBuffer to libcamera.utilsTomi Valkeinen
Move MappedFrameBuffer to libcamera.utils, instead of extending FrameBuffer class with a new mmap() method. This keeps us more aligned to the C++ API. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Add CameraManager.read_event()Tomi Valkeinen
Add CameraManager.read_event() so that the user does not need to call os.read(). We use eventfd, and we must always read 8 bytes. Hiding that inside read_event() makes sense. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Fix None value in ControlType enumTomi Valkeinen
"None" is not a valid name for an enum value, so change it to "Null". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Fix SceneFlicker enum valuesTomi Valkeinen
Stripping 'SceneFlicker' prefix from the enum value names leads to '50Hz' and '60Hz', which are not valid names. So add another heuristics to keep the prefix for SceneFlicker. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam: CleanupsTomi Valkeinen
No functional changes. Drop unused variables, reduce typechecker warnings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: cam_qt: Use libcamera.formatsTomi Valkeinen
Use the new libcamera.formats in cam_qt.py. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27py: Generate pixel formats listTomi Valkeinen
Generate a list of pixel formats under 'libcamera.formats'. The 'formats' is a "dummy" container class, the only purpose of which is to contain the read-only pixel format properties. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27libcamera: ipa: Move IPA control serialization structures to libcamera namespaceLaurent Pinchart
The C structures used to serialize controls are currently defined in the root namespace, which places them at the root level in the class list generated by Doxygen. Move them to the libcamera namespace to fix that. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libcamera: pipeline: uvcvideo: Infer camera location from removable attributeLaurent Pinchart
Use the removable attribute exposed by the USB device in sysfs to infer if the camera is an external (when removable) or front (when non-removable) camera. This is likely not perfect as the removable attribute is derived from ACPI data which may not always be accurate, and non-ACPI platforms likely report all devices as removable. Still, this is a first step upon which a better method could be built. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libcamera: media_device: Return string references to avoid copiesLaurent Pinchart
The MediaDevice::driver(), deviceNode() and model() functions return a const std::string, copying the string stored internally in the class. Return references instead to avoid copies. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-27libipa: camera_sensor_helper: Add Sony IMX477 helperNaushir Patuck
Add support for the Sony IMX477 sensor in the camera helper database. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-27libcamera: camera_sensor: Add IMX477 sensor propertiesNaushir Patuck
Add an entry to the sensor properties for Sony IMX477. Currently no test pattern modes are supported by the device driver. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-26ipa: camera_sensor_helper: Fix equation in exponential gain documentationLaurent Pinchart
The exponential gain documentation is missing a '\' in the equation. Fix t. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-05-25libcamera: controls: Controls for driving AF (autofocus) algorithmsDavid Plowman
This patch describes a series of controls that allow applications to drive AF algorithms: AfMode - manual, auto or continuous AfRange - full, macro or normal AfSpeed - fast or slow AfMetering - how to choose where to measure focus AfWindows - AF window locations AfTrigger - start (trigger) an AF scan or cancel AfPause - pause continuous AF LensPosition - set or retrieve position of lens AfState - reports whether scanning/success/failure AfPauseState - reports whether continuous AF paused or not Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add MJPG support to SDL sinkEric Curtin
So we have at least two supported capturing pixel formats (although many possible output pixel formats thanks to SDL conversion). MJPG support only built in if SDL2_image is available, provides decompression. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: sdl_sink: Add SDL sink with initial YUYV supportEric Curtin
This adds more portability to existing cam sinks. You can pass a YUYV camera buffer and SDL will handle the pixel buffer conversion to the display. This allows cam reference implementation to display images on VMs, Mac M1, Raspberry Pi, etc. This also enables cam reference implementation, to run as a desktop application in Wayland or X11. SDL also has support for Android and ChromeOS which has not been tested. Also tested on simpledrm Raspberry Pi 4 framebuffer successfully where existing kms sink did not work. Can also be used as kmsdrm sink. Only supports one camera stream at present. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: event_loop: Add timer events to event loopEric Curtin
Extend the EventLoop class to support periodic timer events. This can be used to run tasks periodically, such as handling the event loop of SDL. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23cam: event_loop: Rename addEvent to addFdEventEric Curtin
With the addition of addTimerEvent, the naming of addEvent is specific to the management of an fd, while the naming is generic. Update the name to make the naming scheme consistent in specifying the type of event to be added. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-23pipeline: raspberrypi: Fix possible null dereferenceNaushir Patuck
The freeBuffers() cleanup code calls into the IPA to unmap and free shared buffers. However, this function could be called before the IPA has opened (via registerCamera()), causing a segmentation fault. Fix this by guarding against calling the IPA if it has not been opened. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Use script parser to set controlsJacopo Mondi
Add a "--script" option to the cam test application to allow specify a capture script to be used to drive the capture session. Add to the CameraSession class a script parser instance, created conditionally to the OptCaptureScript option. If the script parser has been created, use it at queueRequest time to retrieve the list of controls that has to be associated with a Request, and populate Request::controls() with it before queueing it to the Camera. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Queue requests through CameraSession::queueRequest()Jacopo Mondi
The CameraSession::processRequest() frame completion handler currently re-queues completed requests by calling Camera::queueRequests() explicitely. In order to maintain the CameraSession::queuedRequest_ counter up to date with the actual number of queued requests, call the CameraSession::queueRequest() instead of operating the Camera directly. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-22cam: Add a parser for capture scriptsJacopo Mondi
Add a parser class to the cam test application to control the capture operations through a yaml script. The capture script currently allow to specify a list of controls and their associated values to be applied per-frame. Also add a trivial capture script example to showcase the intended script structure. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-05-20android: Drop gcc 7 compatibilityLaurent Pinchart
Now that we have dropped gcc 7 support, remove the compatibility with gcc versions older than 8 that implemented the filesystem API in the std::experimental namespace. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-05-19libcamera: formats: Add missing RGBX8888 infoTomi Valkeinen
Add missing RGBX8888 PixelFormatInfo. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-19libcamera: formats: Fix warning printTomi Valkeinen
Remove extra "0x" from the print. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Clean up control enums generationTomi Valkeinen
Try to be more consistent with the names, and include "control" in all the names. Also drop a useless "using namespace libcamera" and only include "control_ids.h". Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Rename pyxyz to py_xyzTomi Valkeinen
Having the underscore makes the names more readable, especially when there are multiple words in the name. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Use geometry classesTomi Valkeinen
Now that we have proper geometry classes in the Python bindings, change the existing bindings and the .py files accordingly. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Add geometry classesTomi Valkeinen
Add libcamera's geometry classes to the Python bindings. Note that this commit only adds the classes, but they are not used anywhere yet. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: Implement PixelFormat classTomi Valkeinen
Implement PixelFormat bindings properly with a PixelFormat class. Change the bindings to use the new class instead of a string. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_qt: Cosmetic cleanupsTomi Valkeinen
Drop irrelevant or wrong comments, merge separate_components() into demosaic(), and add mfb_to_rgb(). No functional changes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_kms: Fix multistream displayTomi Valkeinen
Instead of doing an atomic commit for each stream, do a single commit for the two planes. This fixes the issue that only the first plane was actually shown. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam_kms: Support multiplanar formatsTomi Valkeinen
Support multiplanar formats in the kms renderer. Tested with RPi and NV12. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: cam.py: Exit on exceptionTomi Valkeinen
Catch exceptions in the event_handler, as they would get ignored otherwise. Print the exception and return False so that the main loop exits. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: unittests: Make typechecker happyTomi Valkeinen
Add some annotations and self.assertIsNotNone() calls to remove the typechecker warnings. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: unittests: Verify that cam and cm are freedTomi Valkeinen
Add checks to CameraTesterBase to verify that both the Camera and the CameraManager gets freed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: unittests: Fix selector fd useTomi Valkeinen
pyright complains about passing fileobj to os.read. Indeed, the parameter should be an int, but I guess fileobj gets automatically converted. In any case, using the fd is better. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-05-18py: pymain: Fix indentTomi Valkeinen
Fix two minor mis-indents. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-23 21:08:05 +0000