| Age | Commit message (Collapse) | Author |
|---|
|
The simple pipeline handler is enabled by default on arm platforms only,
as it used to support arm SoCs only. Now that support for the IPU6 has
been added to the pipeline handler, it should be enabled on x86
platforms as well. Fix it.
Fixes: 06e0d8508e5c ("libcamera: pipeline: simple: Enable intel-ipu6 with Soft ISP")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
|
|
Unlike in C where they have been standardized since C99, variable-length
arrays in C++ are an extension supported by gcc and clang. Clang started
warning about this with -Wall in version 18:
src/libcamera/ipc_unixsocket.cpp:250:11: error: variable length arrays in C++ are a Clang extension [-Werror,-Wvla-cxx-extension]
250 | char buf[CMSG_SPACE(num * sizeof(uint32_t))];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
One simple option is to disable the warning. However, usage of VLAs in
C++ is discouraged by some, usually due to security reasons, based on
the rationale that developers are often unaware of unintentional use of
VLAs and how they may affect the security of the code when the array
size is not properly validated.
This rationale may sound dubious, as the most commonly proposed fix is
to replace VLAs with vectors (or just arrays dynamically allocated with
new() wrapped in unique pointers), without adding any size validation.
This will not produce much better results. However, keeping the VLA
warning and converting the code to dynamic allocation may still be
slightly better, as it can prompt developers to notice VLAs and check if
size validation is required.
For these reasons, convert all VLAs to std::vector. Most of the VLAs
don't need extra size validation, as the size is bound through different
constraints (e.g. image width for line buffers). An arguable exception
may be the buffers in IPCUnixSocket::sendData() and
IPCUnixSocket::recvData() as the number of fds is not bound-checked
locally, but we will run out of file descriptors before we could
overflow the buffer size calculation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The Qt 6 qkeysequence.h header has an extra semicolon. This causes a
build failure with clang:
/usr/include/qt6/QtGui/qkeysequence.h:139:26: error: extra ';' after member function definition [-Werror,-Wextra-semi]
139 | Q_ENUM(SequenceMatch);
| ^
We can't fix the issue, so ignore the warning in qcam.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
This changes is fixing critical error message
"gst_value_set_int_range_step: assertion 'start < end' failed" observed
when building GStreamer caps from a stream configuration whose size
range holds a single size.
GStreamer range step definition requires distinct min and max values
definitions, otherwise above error message is output.
libcamera SizeRange instance may return a single size leading to
identical min and max values. Add a conditional check where the min and
max of the range are distinct during iterating the supported sizes for
each pixelformat.
To prevent appending structures that are already expressed with this
update, gst_caps_merge_structure() is used in place of
gst_caps_append_structure().
Signed-off-by: Hou Qi <qi.hou@nxp.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The abi-compliance checker reports 100% binary and source compatibility,
so this release does not change the SONAME.
Binary compatibility: 100%
Source compatibility: 100%
Total binary compatibility problems: 0, warnings: 0
Total source compatibility problems: 0, warnings: 0
The following commits in this release relate to either a bug fix or
improvement to existing commit.
- ipa: rpi: Make monoSensor() accessor const
- Fixes: 2031e2f29014 ("ipa: rpi: Add accessor function for monoSensor_")
- libcamera: dma_buf_allocator: Create memfd with CLOEXEC
- Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
- libcamera: dma_buf_allocator: Work around lack of memfd_create() in uClibc
- Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
- libcamera: dma_buf_allocator: Work around lack of file seals in uClibc
- Fixes: ea4baaacc325 ("libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf")
- test: ipa: rkisp1: utils: Fix floating and fixed point conversion test
- Fixes: 9d152e9c66c1 ("ipa: rkisp1: Add a helper to convert floating-point to fixed-point")
- ipa: rkisp1: Fix algorithm controls vanish after configure
- Fixes: 4c5152843a2a ("ipa: rkisp1: Derive rkisp1::algorithms::Agc from AgcMeanLuminance")
- pipeline: rpi: Don't validate configuration in generateConfiguration()
- Bug: https://github.com/raspberrypi/libcamera/issues/138
- ipa: rkisp1: agc: Fix initialization without metering modes
- Fixes: 35233938ee5d ("ipa: rkisp1: agc: Read histogram weights from tuning file")
- v4l2: v4l2_compat: Fix redirect from `__open(at)64_2()`
- Fixes: 1023107b6405 ("v4l2: v4l2_compat: Intercept open64, openat64, and mmap64")
- ipa: rkisp1: blc: Drop [[maybe_unused]] attribute
- Fixes: 50c28e135100 ("ipa: rkisp1: blc: Query black levels from camera sensor helper")
- ipa: rkisp1: ccm: Fix ccm metadata output
- Fixes: cbfdfa42cacc ("ipa: rkisp1: algorithms: Add crosstalk algorithm")
- gstreamer: pool: Replace GstAtomicQueue with deque and mutex
- Bug: https://bugs.libcamera.org/show_bug.cgi?id=201
- gstreamer: allocator: Ensure camera manager stay alive
- Bug: https://bugs.libcamera.org/show_bug.cgi?id=211
And the following updates have been made in this release, grouped by
category:
core:
- treewide: Query list of cameras just once
- libcamera: yaml_parser: Avoid double lookup in `operator[]`
- utils: checkstyle.py: Refactor IncludeChecker
- utils: checkstyle.py: Extend IncludeChecker to cover math.h
- utils: checkstyle.py: Add a check for hex values
- utils: checkstyle.py: Show location of coding style issue within line
- update-kernel-headers: Add linux/udmabuf.h to headers to sync
- include: linux: Update kernel headers to version v6.10-rc1
- libcamera: v4l2_subdevice: Update to the new kernel routing API
- libcamera: Rename DmaHeap class to DmaBufAllocator
- libcamera: DmaBufAllocator: Support allocating from /dev/udmabuf
- libcamera: dma_buf_allocator: Create memfd with CLOEXEC
- libcamera: dma_buf_allocator: Work around lack of memfd_create() in uClibc
- libcamera: dma_buf_allocator: Work around lack of file seals in uClibc
- libcamera: Add gamma control id
- clang-format: Make Qt includes matching case sensitive
- meson: Group libipa and libipa_includes in a dependency object
- libcamera: controls: Add missing period at end of Gamma description
- libcamera: yaml_parser: Make default value templated in `get()`
- libcamera: yaml_parser: Drop std::enable_if_t guards for get() function
- libcamera: yaml_parser: Delegate YamlObject::get() to helper structure
- libcamera: yaml_parser: Add support for float types
- libcamera: base: log: Declare log categories when defining them
- meson: Enable warnings to flag missing declarations
- libcamera: Fix maybe-uninitialized error
- converter: converter_v4l2_m2m: Rectify streams sanity check
- converter: converter_v4l2_m2m: Rename private Stream class
- libcamera: converter: Replace usage of stream index by Stream pointer
- libcamera: base: utils: Implement hex() for 8-bit and 16-bit values
- libcamera: v4l2_videodevice: Use bufferType_ in [get|try|set]Format()
- utils: gen-version: Use posix compliant date
-----------------------------------------------------------------------------
ipa:
- ipa: rpi: Make monoSensor() accessor const
- ipa: rkisp1: Add a helper to convert floating-point to fixed-point
- ipa: rpi: Disable StatsOutputEnable control by default
- ipa: rkisp1: Fix algorithm controls vanish after configure
- ipa: rkisp1: Add GammaOutCorrection algorithm
- ipa: libipa: Add Vector class
- ipa: libipa: Copy pwl from rpi, and clean it up to match libcamera
- ipa: rpi: controller: Use libipa's Pwl class
- ipa: rkisp1: goc: Fix typographical issues in documentation.
- ipa: rkisp1: goc: Drop incorrect [[maybe_unused]]
- ipa: rkisp1: goc: Use copydoc
- ipa: rkisp1: goc: Mark default gamma table as static constexpr
- ipa: rkisp1: goc: Avoid use of auto for short type
- libcamera: libipa: camera_sensor: Define AR0521 helper functions inline
- ipa: rkisp1: cproc: Use anonymous namespace to limit symbol visibility
- ipa: rkisp1: cproc: Merge identical functions
- ipa: rkisp1: cproc: Drop incorrect [[maybe_unused]]
- ipa: rkisp1: agc: Read histogram weights from tuning file
- ipa: rkisp1: agc: Plumb mode-selection and frame duration controls
- ipa: libipa: vector: Specialize YamlObject getter
- ipa: libipa: vector: Drop readYaml() function
- ipa: libipa: pwl: Suffix \param with direction
- ipa: libipa: pwl: Make the empty() function inline
- ipa: libipa: pwl: Add a size() function
- ipa: libipa: pwl: Add a constructor that moves a Point vector
- ipa: libipa: pwl: Specialize YamlObject getter
- ipa: libipa: Add Matrix class
- ipa: libipa: Add MatrixInterpolator class
- ipa: rkisp1: algorithms: Add crosstalk algorithm
- ipa: libipa: vector: Add matrix-vector multiplication
- ipa: rkisp1: agc: Fix initialization without metering modes
- ipa: libipa: agc_mean_luminance: Fix enumerator names
- ipa: libipa: agc_mean_luminance: Include missing header
- ipa: rkisp1: Document all AGC parameters in IPAActiveState
- ipa: rkisp1: Document all AGC parameters in IPAFrameContext
- ipa: rkisp1: agc: Make size argument to computeHistogramPredivider const
- ipa: rkisp1: agc: Don't update histogram parameters unnecessarily
- ipa: rkisp1: agc: Simplify predivider calculation
- ipa: rkisp1: agc: Use mode from frame context to calculate new EV
- ipa: rkisp1: agc: Rename maxShutterSpeed to maxFrameDuration
- ipa: rkisp1: agc: Correctly clamp maximum shutter speed
- ipa: rkisp1: agc: Move AeEnable control to the AGC algorithm
- ipa: rpi: controller: Replace Pwl::readYaml() with YamlObject::get()
- ipa: libipa: pwl: Drop readYaml() function
- ipa: rkisp1: agc: Rename frame context update variable to updateMetering
- ipa: libipa: matrix: Fix incorrect symbol namespace
- ipa: ipa_interface: Declare ipaCreate() in libcamera namespace
- ipa: rpi: Define local functions in anonymous namespace
- ipa: libipa: Add black levels to camera sensor helper
- ipa: rkisp1: Move camHelper into IPAContext
- ipa: rkisp1: blc: Query black levels from camera sensor helper
- ipa: rkisp1: blc: Report sensor black levels in metadata
- ipa: rkisp1: data: Update tuning files for imx219 and imx258
- ipa: rkisp1: Move ov4689 and ov5640 black levels into sensor helpers
- ipa: rkisp1: blc: Drop [[maybe_unused]] attribute
- ipa: rkisp1: Install all tuning files
- libipa: camera_sensor_helper: Add OV5675 black level
- ipa: rkisp1: awb: Clamp gains to machine limits
- ipa: rkisp1: awb: Unconditionally fill metadata
- ipa: rkisp1: ccm: Fix ccm metadata output
- ipa: rkisp1: ccm: Ensure metadata contains valid ccm
- libcamera: libipa: camera_sensor: Add onsemi AR0144 sensor properties
- ipa rkisp1: Remove temperatureK from FrameContext
-----------------------------------------------------------------------------
apps:
- android: camera_capabilities: Fix GCC 14 warning
- v4l2: v4l2_compat: Fix redirect from `__open(at)64_2()`
- v4l2: v4l2_compat: Move `open*()` flag check into function
- py: libcamera: Move function declarations to common header
- v4l2: v4l2_compat: Include missing headers
- v4l2: v4l2_compat: Selectively disable -Wmissing-declarations
- apps: Define local functions in anonymous namespace
- apps: common: dng_writer: Workaround for "Unknown tag 33421" error
- apps: common: dng_writer: Support RAW16 formats
- apps: common: dng_writer: Rename packing functions
- apps: common: dng_writer: Add thumbnail scanline function for Raw
- apps: common: dng_writer: Support RAW10 and RAW12 format
- apps: common: dng_writer: Fix thumbnail generation on BE machines
- apps: common: dng_writer: Fix RAW10 and RAW12 packing on BE machines
- qcam: viewfinder_qt: Maintain aspect ratio
- apps: qcam: Port to Qt 6
- gstreamer: pool: Replace GstAtomicQueue with deque and mutex
- gstreamer: allocator: Ensure camera manager stay alive
- v4l2: v4l2_compat: Fix ioctl() prototype with musl C library
- gst: Add child proxy support to libcamerasrc
- gst: Document libcamerasrc multi stream usage
-----------------------------------------------------------------------------
test:
- test: ipa: rkisp1-utils: Fix capitalization of hex numbers
- test: camera: Increase timeout for vimc capture tests
- test: fence: Turn class member variable into local variable
- test: fence: Fix race condition
- test: fence: Increase timeout for fence test
- test: v4l2_videodevice: Increase timeout for vimc capture tests
- test: ipa: rkisp1-utils: Fix coding style for template arguments
- test: ipa: rkisp1: utils: Fix floating and fixed point conversion test
- test: ipc: unixsocket: Define local function in anonymous namespace
- test: gstreamer: Include missing sanitizer/asan_interface.h header
- test: utils: Extend utils::hex() test to 8-bit and 16-bit values
- test: gstreamer: Test memory lifetime
-----------------------------------------------------------------------------
pipeline:
- libcamera: software_isp: Use a specific integer type for black level
- libcamera: software_isp: Honor black level in AWB
- libcamera: software_isp: Move color mappings out of debayering
- libcamera: software_isp: Remove DebayerParams::kGain10
- libcamera: software_isp: Remove TODO about internal representation
- pipeline: vimc: Don't hardcode scaling factor with recent kernels
- libcamera: software_isp: Allow using dma-buffers from /dev/udmabuf
- libcamera: software_isp: Fix includes ordering in simple.cpp
- pipeline: rkisp1: cproc: Fix default value handling
- pipeline: rpi: Don't validate configuration in generateConfiguration()
- libcamera: debayer_cpu: Add 32bits/aligned output formats
- libcamera: software_isp: Drop unnecessary sanity check
- libcamera: pipeline: simple: Enable intel-ipu6 with Soft ISP
- libcamera: pipeline: simple: Enable Soft ISP for TI CSI-RX
-----------------------------------------------------------------------------
tuning:
- utils: raspberrypi: ctt: Adapt tuning tool for both VC4 and PiSP
- utils: raspberrypi: ctt: Added CAC support to the CTT
- utils: raspberrypi: ctt: Changed CTT handling of VC4 and PiSP
- utils: raspberrypi: ctt: Update tuning tool for HDR
- utils: raspberrypi: ctt: Add option to convert between vc4/pisp targets
- utils: raspberrypi: ctt: Add a maximum gain parameter for LSC
- utils: libtuning: modules: Add skeletal AGC module
- utils: tuning: rkisp1: Add skeletal AGC to the rkisp1 tuning script
- utils: libtuning: Correct GBRG Image parsing
- libtuning: Backport improvements in MacBeth search reliability
- libtuning: Fix reference image
- libtuning: Copy files from raspberrypi
- libtuning: Copy visualize_macbeth_chart from raspberry pi
- utils: tuning: Add requirements file and update readme
- libtuning: Fix imports
- libtuning: Migrate prints to python logging framework
- libtuning: Fix visualize_macbeth_chart()
- libtuning: Improve filename parsing
- libtuning: Implement a minimal yaml parser
- libtuning: Reactivate macbeth locator
- libtuning: Be a bit more verbose
- libtuning: lsc: rkisp1: Clip lsc values to valid range
- libtuning: Use the color member of the Image class
- libtuning: Remove need for Cam object from ccm
- libtuning: modules: Add initial CCM module
- libtuning: Handle cases, where no lsc tuning images are present
- libtuning: Only warn if processing returns None
- libtuning: Add static module
- tuning: rkisp1: Add some static modules
- libtuning: lsc: rkisp1: Do not calculate ratios to green
- libtuning: lsc: Prevent negative values
- libtuning: agc: rkisp1: Increase y-target
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
This adds documentation and an example using gst-launch-1.0.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The child proxy interface is needed in order to allow setting
properties on pad using parse launch syntax.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide the onsemi AR0144 camera sensor properties and registration with
libipa for the gain code helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The musl C library, as well as the POSIX standard, define the ioctl()
function's request argument as an int. glibc and uclibc, on the other
hand, define it as an unsigned long.
This difference between the function prototype and the implementation in
the V4L2 adaptation layer causes a compilation error with musl. Fix it
by detecting the function prototype and declaring the libcamera ioctl()
handler accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Without the camera manager, it is not possible to cleanly delete the
FrameBufferAllocator object. Keep the camera manager alive until all the
memory object have been released.
A shared_ptr to the CameraManager is introduced which is itself stored
as a plain pointer and allocated and released explicitly. When more
than one C++ member is required, this can be refactored to use a new C++
class, but the struct _GstLibcameraAllocator is allocated and freed by
glib, so it does not have automatic destruction presently.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=211
[Kieran: Update test framework to remove expected test fail]
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Test that everything works fine if a buffer outlives the pipeline.
[Kieran: Update test path with comments and clarify test case]
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The version string of libcamera is presently appended with a date/time
argument in the case of a dirty tree to show further detail of when it
was built. This string is generated with the iso-8601 parameter to
'date' and produces a date string in the form:
"2024-06-17T22:15:30+01:00"
Strict posix shells or implementations of 'date' which may be optimised
for size such as the one provided by busybox or Alpine Linux may not
support the '--iso-8601' flag.
To support builds on those platforms, use a direct POSIX-compliant
date-format string instead matching as closely as possible to the
iso-8601 definition.
An exact match is not possible with those restrictions so 'date
%Y-%m-%dT%H:%M:%S%Z' is used which produces 2024-06-17T22:15:30BST.
The use of the human readable timezone identifier provides a friendlier
output for the string than a timezone offset at the expense of being
less sortable in the exceptionally low risk and unlikely event of two
custom builds being compared at the same time of different timezones.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Zach DeCook <zachdecook@librem.one>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The GstAtomicQueue only supports 2 threads, one pushing, and one
popping. We pop and push on error cases and we may have multiple threads
downstream returning buffer (using tee), which breaks this assumption.
On top of which, the release function, that notifies when the queue goes
from empty to not-empty relies on a racy empty check. The downstream
thread that does this check is effectively concurrent with our thread
calling acquire().
Fix this by replacing the GstAtomicQueue with a std::deque, and protect
access to that using the object lock.
Bug: https://bugs.libcamera.org/show_bug.cgi?id=201
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the colour temperature does not change between frames, the ccm
inside the frame context is not updated and the metadata contains
invalid data. Fix that by caching the ccm inside the active state.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
[Kieran: Remove spurious [[maybe_unused]] addition]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Only the first three entries of the matrix were set. Fix that.
Fixes: cbfdfa42cacc ("ipa: rkisp1: algorithms: Add crosstalk algorithm")
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the colour temperature estimation gets skipped, the metadata isn't
populated. Fix that by filling the metadata early in the function.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The frame context is used to store data used for processing that frame.
It is later used to either act as input for other algorithms or to fill
the metadata. For the colour temperature this is not needed, as the
meatadata shall not contain the value that was active when the image was
processed, but the value that was calculated based on the statistics for
that image. This is no functional change.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the color gains are set manually it is possible to specify a
gain that wrapped the hardware limits. It would also be possible to
further tune the floating point limits, but that is an error prone
approach. So the limits are imposed on the integers, just before writing
to the hardware. This noticeably reduces some oscillations in the awb
regulation.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add black level value for OV5675 camera sensor.
According to datasheet, default value is 0x10, 10 bits width.
However, Linux kernel driver initializes black level target value
to 0x40. Set the value to the same as in kernel driver, but scaled
to 16 bits.
Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Open source Qt 5 has been effectively end of life since the release
of Qt 6, and Qt 6 has current LTS releases now.
This change ports qcam to Qt 6.2 and drops some of the baggage related
to Qt 5 that is no longer applicable.
Signed-off-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The j721e-csi2rx driver pipeline uses no converters, so enable the
software ISP plugin support. This is handy for boards with AM62 SoC
(like BeaglePlay) that have no HW ISP.
Tested with IMX519 on SK-AM62 running a kernel built with dmabuf heap
support.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
V4L2VideoDevice is using the caps to determine which kind of buffers to
use with the video-device in 2 different cases:
1. V4L2VideoDevice::open()
2. V4L2VideoDevice::[get|try|set]Format()
And the order in which the caps are checked is different between
these 2 cases. This is a problem for /dev/video# nodes which support
both video-capture and metadata buffers. open() sets bufferType_ to
V4L2_BUF_TYPE_VIDEO_CAPTURE[_MPLANE] in this case, where as
[get|try|set]Format() will call [get|set]FormatMeta() which does not
work with V4L2_BUF_TYPE_VIDEO_CAPTURE[_MPLANE] buffers.
Switch [get|try|set]Format() to use the bufferType_ to determine on what
sort of buffers they should be operating, leaving the V4L2VideoDevice
code with only a single place where the decision is made what sort
of buffers it should operate on for a specific /dev/video# node.
This will also allow to modify open() in the future to take a bufferType
argument to allow overriding the default bufferType it selects for
/dev/video# nodes which are capable of supporting more then 1 buffer type.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Keep the image aspect ratio when displaying in the viewfinder.
When the window is adjusted to a size that differs in aspect ratio to
the image, keep the image centered in the main window.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
We have all these neat tuning files. Unfortunately we forgot to install
many of them.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
With the addition of gamma out correction the relative luminance target
was set too low. As brightness is a bit subjective it is difficult to
come up with the "correct" value. With 0.5 the patch 22 on the macbeth
chart (neutral grey, 18% reflectance) ended up a bit below 50% grey,
which seems reasonable.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In cases where the calibration image contains super dark areas, or when
an invalid blacklevel was supplied, the grid might get close to zero or
negative. This would have bad effects on the 1/grid later. So clamp the
values to a small positive number.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
The current LSC algorithm for the rkisp1 just forwards the LSC tables to
the hardware, so absolute factors are needed and not ratios compared to
green. Therefore every channel needs to be calculated independently.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add awb, blc, cproc, filter, and gamma to the tuning file. These don't
need any configuration.
At the moment there are no inter-module dependencies in the tuning
process. We can therefore safely sort them alphabetically. As soon as
the first dependency gets introduced (most likely lsc -> ccm) we will
see how to solve that.
The output order controls the order of processing in the IPA. It is now
also in alphabetical order which happens to be no change for the modules
that existed previously. For the others, there is no need for a specific
order.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a static module class, that can be used to add static data to the
tuning file. This is propably not the best solution, but allows us to
progress without writing lots of dummy classes for static cases.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
There are valid cases where a module returns None. E.g. no images were
provided for LSC calibration. We should however define proper semantics
there. Continue with a warning for now.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Make it clear that no lsc calibration was done by returning None instead
of a incomplete configuration.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Implement a minimal ccm calibration module. For now it doesn't take the
results from lsc into account and supports rkisp1 only.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Remove the need for the Cam object, as we don't want to port
it from Raspberry Pi.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
In the Image class the variable holding the color temperature is named
color instead of col which was used by the raspberry pi scripts. Rename
accordingly.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Based on the input images, the lsc values could exceed the range allowed
by the rkisp1. As we are now clipping the values, we can simplify the
value mapping.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Print a info on every image that gets processed and a warning on every
image that gets ignored.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add the missing pieces and store the result inside the image object.
This solution is not very nice, and should be refactored soon. For that
we need a concept to collect temperature and/or image specific results
in a central place. For now it serves the purpose.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
At the moment this just reads the yaml file and returns it verbatim.
This needs to evolve further in the near future.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In the tuning datasets, the files had names like
'imx335_1600l_3000k_1.dng'. That failed on the old filename parsing
function. As there is no need to dictate the order of the tags, split
the big regex into chunks and parse them one by one. This also makes
the code easier to digest.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The old function uses PIL to save the image, which is not in the
requirements file. As we are already requiring opencv, use that to save
images instead of an additional dependency
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
In ctt_ccm.py the logging functionality of the Cam object was used. As
we don't want to port over that class, it needs to be replaced anyways.
While at it, also replace the eprint function as it doesn't add any
value over the logging framework and misses the ability for easy log
formatting.
For nice output formatting add the coloredlogs library.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Fix imports to match new structure in the files copied from Raspberry
Pi. Add missing imports in macbeth.py. Add missing dependencies to
requirements.txt.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
|
|
Add a requirements file to ease the installation and use of the tuning
scripts. Document that in the readme. No debian packages are provided as
rawpy is not packaged as deb. So pip has to be used anyways.
Also add pyyaml which was missing in the dependencies.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Copy visualize_macbeth_chart from raspberry pi. It is copied verbatim
and does not work in this state.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Copy ctt_{awb,ccm,colors,ransac} from the raspberrypi tuning scripts as
basis for the libcamera implementation. color.py was renamed to
ctt_colors.py to better express the origin.
The files were taken from commit 66479605baca ("utils: raspberrypi: ctt:
Improve the Macbeth Chart search reliability").
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Paul Elder <paul.elder@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Opencv fails to load the image. The added license destroys the magic
number. Fix, by moving the licence below the magic number.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul ELder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Port commit 66479605baca ("utils: raspberrypi: ctt: Improve the Macbeth
Chart search reliability") into libtuning.
Previously the code would brighten up images in case the Macbeth Chart
is slightly dark, and also zoom in on sections of it to look for
charts occupying less of the field of view. But it would not do both
together.
This change makes the search for smaller charts also repeat that
search for the brightened up images that it made earlier, thereby
increasing the chances of success for non-optimal tuning images.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Now that the utils::hex() function supports 8-bit and 16-bit integers,
extend the unit test to cover them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The utils::hex() function is implemented for 32-bit and 64-bit integers,
but not for 8-bit and 16-bit. This causes a link error (possibly at
runtime for IPA modules due to lazy linking) when trying to print 8-bit
or 16-bit integers. Implement additional specializations to fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
|
|
The context parameter of the BlackLevelCorrection::init() function is
used. Drop the [[maybe_unused]] attribute.
Fixes: 50c28e135100 ("ipa: rkisp1: blc: Query black levels from camera sensor helper")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
