| Age | Commit message (Collapse) | Author |
|---|
|
Report in the Request metadata the scaler crop region as requested by
application through the request controls. No actual scaling is applied
in the pipeline at the moment.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ANDROID_SCALER_AVAILABLE_MAX_DIGITAL_ZOOM static metadata
inspecting the ScalerCrop control's limits.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the ScalerCrop control in the ImgU pipeline handler computed
by using the Viewfinder [1280x720] pipeline output configuration and
the sensor resolution as parameters.
The ScalerCrop control limits should be updated every time a new
configuration is applied to the sensor.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Instead of reporting a fake value in the dynamic metadata for the
EXPOSURE_TIME control, use the value provided by the pipeline.
The metadata is only meaningfull in FULL mode.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Register the EXPOSURE_TIME_RANGE static metadata inspecting the
ExposureTime control limits as reported by the camera.
If such information is not available, do not register the property.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Calculate the controls::Exposure limits at camera registration time
and register it in the list of camera supported controls.
Cache the default exposure value to report it in the request metadata.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add the V4L2_CID_EXPOSURE control to the list of mandatory controls the
sensor driver has to report and document this new requirement.
While at it, re-sort the mandatory V4L2 controls in alphabetical
order in the CameraSensor class and remove the above comment as
the usage of the controls is better reported in the documentation.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The current CameraSensor interface for reading and writing controls
is currently based on V4L2 controls.
Mention that more clearly in the documentation and, while at it, re-sort
the documentation to match the methods declaration order.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Some internals includes that used to be public still have the public
header guard. Rename it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
When a Camera3RequestDescriptor instance is created to wrap a
camera3_capture_request_t the settings associated with the request
are cloned for later re-use.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a default constructor that initializes a non valid CameraMetadata
to allow embedding instances of the class in other types.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The camera3_stream_buffer_t instances part of a capture request contain
information on the stream for which capture has been requested (size,
format and fences) and a handle to the stream's memory buffers.
This information is copied in the descriptor one piece at the time while
processing the camera3 streams to be re-used at request completion time.
Simplify the code by copying the stream information in the descriptor
at construction time.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Camera3RequestDescriptor class can access the number of buffers
and the frame number from the camera3_capture_request_t instead of
having the caller passing them to the constructor.
This change allows to access other fields of the capture request, such
as the capture settings.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a copy constructor and assignment operator to CameraMetadata, as well
a constructor from camera_metadata_t. Also add a function getEntry to
allow getting metadata entries from CameraMetadata. This allows us to
use CameraMetadata for reading from camera_metadata_t.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The Commit class and subclasses were reworked in commit 4f5d17f3a4f5
("utils: checkstyle.py: Make title and files properties of commit
class") with the introduction of members of the base class that were
meant to be protected (not used externally, but accessible by
subclasses). They have been named with a '__' prefix for this purpose,
which was a bad choice as Python effectively replaces a leading '__'
with a literal '__classname__' prefix to make them private
(https://docs.python.org/3/tutorial/classes.html#private-variables). The
members accessed in the derived classes are thus different from the ones
in the base class.
Fix this by replacing the double underscore prefix with a single
underscore, which is a "weak internal use indicator" (as specified in
https://www.python.org/dev/peps/pep-0008/), closer to the protected
access specifier of C++.
Reported-by: Umang Jain <email@uajain.com>
Reported-by: Naushir Patuck <naush@raspberrypi.com>
Fixes: 4f5d17f3a4f5 ("utils: checkstyle.py: Make title and files properties of commit class")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Now that Debian backports have been updated to meson v0.56, all major
distributions provide meson >= v0.53 in their latest LTS version. We can
replace the manual message()-based configuration summary with the
summary() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Set the maximum shutter speed for the normal exposure profile to 66ms,
allowing viewfinder framerates to go down to approx. 15fps.
Set the maximum shutter speed for the sport exposure profile to 33ms,
limiting the minimum framerate to approx. 30fps.
Add a long exposure profile to allow shutter speeds of up to 120ms.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add support for setting V4L2_CID_VBLANK appropriately when setting
V4L2_CID_EXPOSURE. This will allow adaptive framerates during
viewfinder use cases (e.g. when the exposure time goes above 33ms, we
can reduce the framerate to lower than 30fps).
The minimum and maximum frame durations are provided via libcamera
controls, and will prioritise exposure time limits over any AGC request.
V4L2_CID_VBLANK is controlled through the staggered writer, just like
the exposure and gain controls.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add an int64_t array control (controls::FrameDurations) to specify the
minimum and maximum (in that order) frame duration to be used by the
camera sensor.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Tested-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The description of the V4L2_CID_CAMERA_SENSOR_ROTATION control
usage wrongly mentioned the camera "orientation" while it actually
reports the camera rotation.
Fix it by using the right term.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Reorder the introductory section of the sensor driver requirements
document to match the expected English language syntax.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Suggested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Now that the pixel array properties have been defaulted in the
CameraSensor class (or in the pipeline handler, for the UVC use case),
they will always be reported by the libcamera::Camera and there's no
need to default them in the Camera HAL.
Remove defaults and assume properties are always there.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The VIMC driver does not yet support all the features required
for all sensor drivers. As it is the main testing platforms and the
driver changes might take a long time to land in the developments
and testing platforms, temporary close the gap by skipping driver
validation and initializing properties with static information such
as the sensor resolution.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a const version of the MediaObject::dev() method to be able to
retrieve a pointer to a const MediaDevice from a constant instance of
a MediaObject sub-class.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Initialize the pixel array properties in the UVC pipeline handler as
they're now initialized in the CameraSensor class, which the UVC
pipeline handler does not use.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The 'rotation' property is not critical. Only register it if the
sensor driver reports it.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
If the sensor driver does not report the camera location default it
to 'External' instead of 'Front'.
As the camera location is used to construct the camera unique name
presented to the user, it makes more sense to report multiple 'External'
cameras instead of multiple 'Front' ones.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
As support for the V4L2_SEL_TGT_CROP selection target used to read the
sensor analogue crop rectangle is schedule to become mandatory but is
still optional, use the sensor's active area size as fallback value to
allow the creation of the CameraSensorInfo in the case the driver does
not support it.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Support for the V4L2 selection API is currently optional in the
CameraSensor class. Properties registered by using values read through
that API are defaulted in several different places (the Android camera
HAL or the CameraSensor class).
In the future support for the selection API will be made mandatory, but to
give time to sensor drivers in all test platforms to be updated, use
sensor resolution as fallback values for sensor pixel array properties
and cache them as class member variables.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The CameraSensor class requires the sensor driver to report
information through V4L2 controls and through the V4L2 selection API,
and uses that information to register Camera properties and to
construct CameraSensorInfo class instances to provide them to the IPA.
Currently, validation of the kernel support happens each time a
feature is requested, with slighly similar debug/error messages
output to the user in case a feature is not supported.
Rationalize this by validating the sensor driver requirements in a
single function
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Document the feature an image sensor driver has to provide to be
fully libcamera-compliant.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The scope of File::exists() was changed to only validate that a file
exists and is therefore not usable to check if a directory exists. This
breaks the persistent name generation for DT based systems as it uses
File::exists() to check for directories, fix this by using stat()
directly.
On Scarlet the persistent names of the cameras are impacted by this and
where incorrectly reported as:
$ cam -l
Available cameras:
1: Internal front camera (platform/ff160000.i2c/i2c-7/7-003c ov2685)
2: Internal front camera (platform/ff160000.i2c/i2c-7/7-0036 ov5695
While the expected ones are restored with this fix:
$ cam -l
Available cameras:
1: Internal front camera (/base/i2c@ff160000/camera@3c)
2: Internal front camera (/base/i2c@ff160000/camera@36)
Fixes: 8f4e16f014c820a0 ("test: file: Check that directories are not treated as files")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
On the bail out path, always ensure that ImgU and CIO2 are stopped
before freeing the buffers. V4L2VideoDevice class guarantees that
calling stop() without having to call start() is harmless, hence use
this guarantee to simplify error paths.
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Track the state of streamon/streamoff calls to simplify error paths.
Ensuring that streamOff() can be called on non-streaming streams
facilitates simpler error code paths, where a set of devices can all
call streamOff regardless of their initialisation state.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
s/chance/change/
Signed-off-by: Sebastian Fricke <sebastian.fricke.linux@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Android camera2 API defines a RAW capture capability ([1]) for
devices that support "outputting RAW buffers and metadata for
interpreting them". This capability requires the camera device to
support RAW_SENSOR ([2]) as an output format. Despite what its name may
sound like, the RAW_SENSOR format is defined as a 16 bits RAW format,
not an opaque implementation-dependent format (which is instead called
RAW_PRIVATE). Devices may additionally support the RAW10 and RAW12
formats, but that isn't enough to claim RAW capture capability.
To comply with the API requirements, only report the
ANDROID_REQUEST_AVAILABLE_CAPABILITIES_RAW capability when 16-bit RAW is
supported.
[1] https://developer.android.com/reference/android/hardware/camera2/CameraMetadata#REQUEST_AVAILABLE_CAPABILITIES_RAW
[2] https://developer.android.com/reference/android/graphics/ImageFormat#RAW_SENSOR
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Simplify the src level meson file by moving the declaration of the v4l2
subdir to match the other invocations, making use of 'subdir_done()' to
break out if the adaptation layer is not enabled.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Move the android subdir below the configuration options to keep all
subdirs together.
Add a comment explaining why android must come first, and some padding
to group the libcamera and ipa components, applications, and remaining
adaptation layers.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Utilise the subdir_done() functionality as is used with other optional
components to simplify the top level meson file.
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Ensure that when we check for existence with File() it will only return
if the path leads to a file, and not a directory.
Device nodes which could still be opened by this class are still
supported.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Directories can not be opened as a file, so the exists() check should
not return true for a path which points to a directory.
Directories are not handled by the File class.
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When accessing the value of a property by reading the properties
ControlList content with ControlList::get<>() it is not necessary to
specify the template type as it is already conveyed by the Control
instance provided as first argument.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Conditionally report the ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT
property inspecting the draft property reported by the libcamera Camera.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Inspect the list of media bus codes supported by the camera sensor
in order to deduce the color filter arrangement and register the
ColorFilterArrangement draft property.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The existing implementation of the BayerFormat class supports
converting a V4L2PixelFormat to a BayerFormat and vice-versa.
Expand the class by adding support for converting a media bus code
to a BayerFormat instance, by providing a conversion table and a
dedicated static methods.
Do not provide support for converting a BayerFormat to a media bus code
as there's no 1-to-1 mapping between the two.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Define the 'ColorFilterArrangement' draft property. The property is
currently identical to ANDROID_SENSOR_INFO_COLOR_FILTER_ARRANGEMENT.
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Formatting code using astyle doesn't lead to results as good as with
clang-format, and doesn't receive much test coverage as most developers
use clang-format. The code is thus bitrotting. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
|
|
Add a commit checker that ensures that all header files added to the
libcamera includes (public or internal) are accompanied by a
corresponding update of the meson.build file in the same directory.
Here's the output of the new checker when run against a commit that
forgot to update meson.build.
$ ./utils/checkstyle.py b3383da79f1d
---------------------------------------------------------------------------------
b3383da79f1d513b0d76db220a7104e1c1035e30 libcamera: buffer: Create a MappedBuffer
---------------------------------------------------------------------------------
Header include/libcamera/internal/buffer.h added without corresponding update to include/libcamera/internal/meson.build
---
1 potential issue detected, please review
In theory we could extend the checker to cover .cpp files too, but the
issue will be quite noticeable as meson won't build the file if
meson.build isn't updated. Header files are more tricky as problems
would only occur at when installing the headers (for public headers), or
would result in race conditions in the build. Both of those issues are
harder to catch.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a new category of checkers that operate on a whole commit.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
To avoid duplicating diff parsing in commit checkers, move it to the
Commit class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
