| Age | Commit message (Collapse) | Author |
|---|
|
We now time-filter the exposure before sorting out how much digital
gain is required. This is actually a little more natural and
simplifies the code. It also prepares us for some future work where
this arrangement will be helpful.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrpyi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
prepare() doesn't use the AWB status, so fetching it in process() is
probably better. This change is preparatory to other changes, where we
may find ourselves calling process() without having called prepare()
previously.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Replace the buffer id generation in RPi::Stream with a simple integer
counter since ids don't get recycled any more.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Since we don't distinguish between externally and internally allocated
dma bufs, rename this function to setExportedBuffer() to clearer on its
function.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There is no need to distinguish between dma bufs allocated outside of
libcamera and internally allocated buffers. As such, remove all the
special case handling of such buffers.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Hardcode the maximum number of buffers imported to the V4L2 video device
to 32. This only has a minor disadvantage of over-allocating cache slots
and V4L2 buffer indexes, but does allow more headroom for using dma
buffers allocated from outside of libcamera.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
For compressed formats, v4l2_pix_format.bytesperline value will be zero
and is documented similarly in the kernel. Since we set the stride to
v4l2_pix_format.bytesperline, document the case where it is expected
to be zero (i.e. if the format is compressed).
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The imx290 produces a single unusable frame on startup and mode switch.
This is signalled to the IPA in the mode switch case, but not the
startup case. Fix this.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
`SortIncludes: true` was added in both commit ae05b9f9d082
("clang-format: Enable sorted includes") and commit 0e1ff86e78ae
("clang-format: Regroup sort orders"), which caused issues to run
clang-format.
Fixes: 0e1ff86e78ae ("clang-format: Regroup sort orders")
Signed-off-by: Harvey Yang <chenghaoyang@chromium.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Sphinx 7.0.0 has dropped support for the deprecated 'style' variable
(https://github.com/sphinx-doc/sphinx/pull/11381). This breaks
compilation of the documentation:
/usr/bin/sphinx-build -D release=v0.1.0+16-eed6a079 -q -W -b html Documentation Documentation/html
Theme error:
An error happened in rendering the page api-html/index.
Reason: UndefinedError("'style' is undefined")
The recommended replacement is 'styles[-1]'. However, this resolves to
'_static/css/theme.css', which is part of the 'css_styles' variable, and
results in the stylesheet being included twice. To avoid that and fix
the compilation error, simply drop the first reference.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Don't make an unnecessary call to toV4L2DeviceFormat() from validate()
to get a V4L2DeviceFormat. Instead, the conversion can happen directly
from the RAW stream PixelFormat.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
|
|
The meson find_library() function takes a library name without the "lib"
prefix. Its usage to find lic++ is thus not correct, and meson warns
about it:
WARNING: find_library('libc++') starting in "lib" only works by accident and is not portable
Fix it by dropping the "lib" prefix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Amendment class calls `git show` twice, once to extract the commit
title, and a second time to extract the trailers. This can be combined
in a single command, which is more efficient. Do so.
While at it, centralize initialization of self._trailers in the
Commit.__init__() function.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Increase the maximum list size to 2000 elements. This allows, for
example, larger lens shading config structures to be parsed correctly
without throwing any errors.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The FocusFom metadata was no longer being reported back because the
"focus.status" metadata was never being created.
Additionally, the scaling of the focus FoMs was over-zealous, rounding
just about everything down to zero.
Fixes: ac7511dc4c59 ("ipa: raspberrypi: Generalise the focus reporting code")
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Altered the way that some lines are laid out, made functions
more attractive to look at, and tidied up messy areas.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Altered the color matrices for the tuning files for various
cameras in order to make them more color accurate.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Added code which optimises the color matrices based off
delta E values for the calibration images. Working in LAB
color space.
Signed-off-by: Ben Benson <ben.benson@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
We handle the flicker modes by passing the correct period to the
AEC/AGC algorithm which already contains the necessary code.
The "Auto" mode, as well as reporting the detected flicker period via
the "AeFlickerDetected" metadata, are unsupported for now.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
Flicker is the term used to describe brightness banding or oscillation
of images caused typically by artificial lighting driven by a 50 or
60Hz mains supply. We add three controls intended to be used by
AEC/AGC algorithms:
AeFlickerMode to enable flicker avoidance.
AeFlickerPeriod to set the flicker period "manually".
AeFlickerDetected to report any flicker that is currently detected.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The format to be applied on the sensor is selected by two criteria: the
desired output size and the bit depth. As the selection depends on the
presence of a RAW stream and the streams configuration is handled in
validate() there is no need to re-compute the format in configure().
Centralize the computation of the sensor format in validate() and remove
it from configure().
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
The findBestFormat() helper operates on the list of sensor formats,
which is owned by the CameraData class. Move the function to that class
as well to:
1) Avoid passing the list of formats to the function
2) Remove a static helper in favour of a class function
3) Allow subclasses with access to CameraData to call the function
Move to the CameraData class the scoreFormat helper as well.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
|
|
populateSensorFormats() is a static helper that is called from a single
place and performs a simple loop over the sensor camera formats.
Remove it and in-line it in the caller to remove one static helper from
the pipeline_base.cpp file.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The commit trailers are checked as part of processing the commit message
with the newly introduced TrailersChecker.
This relies on the trailers property being correctly exposed by the
Commit object, and is implemented for the base Commit but not processed
for Amendment commits.
Refactor the trailer property handling to a helper function in the base
Commit class and make use of it with a newly added call to obtain the
existing Trailers from the most recent commit when using Amendment.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The Amendment commit class is derived from the StagedChanges class
(which in turn derives from the Commit base class), however there is no
code sharing between Amendment and StagedChanges other than the call to
initalise through the base Commit class.
Refactor the inheritance to make an Amendment derive directly from
Commit.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
There are no possible Trailers for staged changes as the commit message
has not yet been written.
Initialise the empty trailers when the commit object is initialised.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
If a Malformed trailer is identified the checkstyle script triggers a
RuntimeError and stops processing the rest of the commit.
A malformed trailer can be regarded as an issue in the commit and
reported as such using the same method as other faults identified by the
tool.
Convert the RuntimeError into a CommitIssue and continue processing
other trailers.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
ABI Compliance:
abi-compliance-checker reports 99% binary compatibility and 81.4% source
compatibilty between version 0.0.5 and 0.1.
- Binary compatibility: 99%
- Source compatibility: 81.4%
- Total binary compatibility problems: 4, warnings: 2
- Total source compatibility problems: 165, warnings: 7
Now that we have funtional ABI validation, the soname has been updated from
libcamera.so.0.0.5 to libcamera.so.0.1.
Future releases will now maintain the same soname until an ABI breakage is
detected to reduce the repackaging and rebuilding of other components that may
use libcamera. The abi-compatibility report can now be generated with the new
utility './utils/abi-compat.sh'.
Key differences here are due to preventing the installation of internal and
private headers in the packaging process, and most of this API compatibility
should not be visible to applications with the exception of:
- Camera::generateConfiguration ( StreamRoles const& roles )
The StreamRoles type definition has been removed. This is now handled as a
Span<StreamRole> to prevent unnecessary allocations and copies.
- CameraManager::addCamera ( std::shared_ptr<struct Camera> camera, std::vector<unsigned long>const& devnums )
- CameraManager::get ( dev_t devnum )
- CameraManager::removeCamera ( std::shared_ptr<struct Camera> camera )
These functions of the CameraManager were for use exclusively by the V4L2
adaptation layer, and not intended for use by applications. This has now been
reworked to use the new SystemDevices and the redundant functions removed.
The ABI/API breakages have been introduced by:
5ca0c9276f28 ("libcamera: CameraManager: Remove ::get(dev_t)")
26a4b83d1b94 ("libcamera: Remove `StreamRoles` alias")
63966ae587d7 ("libcamera: base: Do not install private headers")
Core:
- libcamera: v4l2_videodevice: Use O_CLOEXEC when exporting DMA buffers
- libcamera: ipa_manager: Allow IPA loading in nested subdirs
- meson: Fix usage of overwritten pipeline variable
- subprojects: Drop leftovers of pybind11
- camera_sensor: ipa: core: Add CFA pattern to IPACameraSensorInfo
- libcamera: controls: Define a default lens position behaviour
- libcamera: internal: request: convert to pragma once
- libcamera: camera_manager: Move private implementation to internal
- libcamera: camera_manager: Move {add,remove}Camera to internal
- libcamera: properties: Provide a Devices camera property
- libcamera: pipeline: Register device numbers with camera
- libcamera: camera_sensor: Adjust properties::Rotation
- libcamera: meson: Allow PH to change libcamera_deps
- libcamera: base: Move thread_annotations to private
- libcamera: base: Do not install private headers
- utils: ABI Compatibility checker
- meson: Use x.y soname versioning
- libcamera: camera: Take span of StreamRole instead of vector
- libcamera: Remove `StreamRoles` alias
- utils: ipu3-capture.sh: Fix the script to work with recent media-ctl versions
- Documentation: Add predefined macros from config.h to Doxyfile
- utils: checkstyle: Add __repr__ method to CommitFile class
- utils: checkstyle: Support running checkers selectively
- utils: checkstyle: Don't include commit ID in commit title
- utils: checkstyle: Add trailers checker
- tests: gstreamer: Test cameras' enumeration from GstDeviceProvider
- meson: Fix space around colon issues
- libcamera: Add option to configure udev support
- libcamera: CameraManager: Remove ::get(dev_t)
- tests: gstreamer: Fix compiler error with gcc 8.4.0
ipa:
- meson: ipa: Add mapping for pipeline handler to mojom interface file
- libcamera: ipa: Remove character restriction on the IPA name
- ipa: meson: Allow nested IPA directory structures
- ipa: raspberrypi: Introduce IpaBase class
- ipa: raspberrypi: agc: Move weights out of AGC
- ipa: rkisp1: agc: drop hard-coded analogue gain range
- libipa: camera_sensor_helper: Add IMX327 helper
- pipeline: rpi: ipa_base: Parse config files after platformRegister()
- libcamera: camera_sensor: Add Sony IMX327 sensor properties
- ipa: rpi: imx296: Small refinements to the IMX296 mono sensor tuning
- ipa: rpi: Handle controls for mono variant sensors
- libcamera: controls: Drop reference to IPA in controls documentation
- libipa: camera_sensor_helper: Restore alphabetical order
- ipa: ipu3: agc: Drop hard-codec analogue gain max
- ipa: rkisp1: agc: Restore minimum analogue gain limit
- pipeline: ipa: rpi: Return lens controls from ipa->configure()
- ipa: rpi: Set lens position to hyperfocal on startup
- ipa: rpi: tunings: Add missing short and long exposure profiles
- ipa: rpi: agc: Use std::string instead of char arrays
- ipa: rpi: agc: Gracefully handle missing agc modes
- ipa: rpi: agc: Do not switch to a default if a mode is unavailable
- ipa: rpi: imx708: Fix mode switch drop frame count
- ipa: rpi: imx296_mono: Disable all colour shading
pipeline:
- libcamera: pipeline: simple: Add support for ST's DCMIPP
- pipeline: meson: Allow nested pipeline handler directory structures
- pipeline: ipa: raspberrypi: Refactor and move the Raspberry Pi code
- pipeline: raspberrypi: rpi_stream: Set invalid buffer to id == 0
- pipeline: ipa: raspberrypi: Restructure the IPA mojom interface
- pipeline: raspberrypi: Make RPi::Stream::name() return const std::string &
- pipeline: raspberrypi: Introduce PipelineHandlerBase class
- pipeline: raspberrypi: Add stream flags to RPi::Stream
- libcamera: rkisp1: Generate config using main path
- libcamera: rkisp1: Crop on ISP before downscaling
- libcamera: rkisp1: Assign sizes to roles
- libcamera: rkisp1: Fix enumeration of RAW formats
- pipeline: rpi: Do not return an error from pipeline config file handling
- libcamera: pipeline: simple: Support TI CSI-RX
- pipeline: rpi: Account for Bayer packing when validating format
apps:
- apps: qcam: Remove redundant check
- v4l2: Move the v4l2 compat layer to libexec/libcamera
- android: mm: generic: use GRALLOC_HARDWARE_MODULE_ID
- android: mm: Stub libhardware for build tests
- py: Fix CameraManager.version property
- py: Move ColorSpace and Transform classes to separate files
- py: Use exceptions instead of returning error codes
- py: unittests.py: Add weakref helpers and use del
- py: Move to mainline pybind11 version
- py: Fix code formatting
- py: unittests.py: Fix type checker warnings
- gstreamer: Add enable_auto_focus option to the GStreamer plugin
- gstreamer: Drop libcamera_private dependency
- apps: Add ipa-verify application
- v4l2: v4l2_camera_proxy: Prevent ioctl sign-extensions
- v4l2: Use SystemDevices properties to identify cameras
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The provider g_autoptr variable introduced by commit adb1bbb748a1
("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider")
is left uninitialized when declared. The cleanup function could thus get
called on an unitialized variable if the scope was exited before the
variable gets initialized. This can't occur here, but gcc 8.4.0 still
complains about it:
/usr/include/glib-2.0/glib/gmacros.h: In member function ‘virtual int GstreamerDeviceProviderTest::run()’:
/usr/include/glib-2.0/glib/gmacros.h:1049:27: error: ‘provider’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
{ if (_ptr) (cleanup) ((ParentName *) _ptr); } \
^
../test/gstreamer/gstreamer_device_provider_test.cpp:37:32: note: ‘provider’ was declared here
g_autoptr(GstDeviceProvider) provider;
Silence the error by initializing the variable to NULL at declaration
time. This is a good practice in any case, as later refactoring could
otherwise introduce a scope exit before initialization.
Fixes: adb1bbb748a1 ("tests: gstreamer: Test cameras' enumeration from GstDeviceProvider")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraManager::get(dev_t) implementation was provided only for the
V4L2 Adaptation layer. This has now been replaced with the use of the
public SystemDevices property.
Remove the deprecated function entirely, along with the camerasByDevnum_
map which was only used to support this functionality.
This is a clear (and intentional) breakage in both the API and ABI.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The CameraManager->get(dev_t) helper was implemented only to support the
V4L2 Adaptation layer, and has been deprecated now that a new camera
property - SystemDevices has been introduced.
Rework the implementation of getCameraIndex() to use the SystemDevices
property and remove reliance on the now deprecated call.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Handling ioctl's within applications is often wrapped with a helper such
as xioctl. Unfortunately, there are many instances of xioctl which
incorrectly handle the correct size of the ioctl request.
This leads to incorrect sign-extension of ioctl's which have bit-31 set,
and can cause values to be passed into the libcamera's v4l2 adaptation
layer which no longer represent the true IOCTL code.
Match the implementation of the Linux kernel and ensure that only 32
bits of the ioctl request are used by assigning to an unsigned int.
Link: https://github.com/Motion-Project/motion/discussions/1636
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Colour shading should be turned off for the mono variant of the IMX296
sensor. To do this, set all the colour gain coefficients to 1.
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <daivd.plowman@raspberrypi.com>
Reviewed-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The imx708 must drop a single frame on startup - but only when in HDR
mode. Non-HDR modes do not need to drop frames. Fix the logic in
hideFramesModeSwitch() which currently unconditionally advertises to
drop one frame.
Unfortunately there is no clear way to tell if the sensor is in the HDR
mode. So for now, look the resolution and framerate to deduce this.
Additionally ensure we override hideFramesStartup() and return the same
number as hideFramesModeSwitch().
Bug: https://github.com/raspberrypi/libcamera-apps/issues/524
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
RPiCameraConfiguration::validate() did not account for user supplied
Bayer packing when validating the RAW stream configuration. Fix this
by seeing what packing (if any) has been specified selecting the output
RAW stream format.
Fixes: 6c71ee1f1530 ("pipeline: raspberrypi: Introduce PipelineHandlerBase class")
Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: David Plowman <david.plowman@raspberrypi.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
New TI SoCs from J7 and AM62 family have a camera pipeline that receives
data using Cadence's DPHY-RX and CSI-RX bridge. A pixel-grabbing "shim"
IP routes this incoming stream of data to the DMA subsystem, to finally
store the frame data in memory.
The driver for this is not merged in mainline yet, but v7 was posted [1]
on linux-media list a few months ago.
With some minor fixes, the work-in-progress v8 series [2] works with the
simple pipeline handler, so we enable support for this device.
Link: https://lore.kernel.org/all/20230314115516.667-1-vaishnav.a@ti.com/ [1]
Link: https://github.com/jailuthra/linux/commits/6ff226ca13f34 [2]
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
libcamera uses udev to support hotplug (and unplug) detection. This is
an optional feature, which gets selected automatically if udev is
available. Users may however want to build libcamera without hotplug
detection, even if udev is available on the system. Add a new feature
option to control udev support. The default value is auto, which retains
the existing behaviour.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The meson style, which libcamera follows, recommends a space before
colons in function parameters. Fix the style violations through the
project.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
|
|
Test the enumeration of the cameras through GstDeviceProvider against
the libcamera camera manager.
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
|
|
The libcamera git history contains numerous examples of incorrect commit
message trailers due to invalid trailer types (e.g. Change-Id), typos
and other small issues. Those went unnoticed through reviews, which
shows that an automated checker is required.
Add a trailers checker to checkstyle.py to catch invalid or malformed
trailers, with a set of supported trailers that match libcamera's commit
message practices. New trailer keys can easily be added later as new
needs arise.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The commit title and commit ID are two different pieces of information.
Don't include the latter in the former, to simplify code that only needs
the commit title. Constructing a string from the ID and title is easier
than splitting the combined string back into its elements.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
During development of the checkstyle.py script, it can be useful to run
only a subset of the checker. Add the ability to do so with a
'--checkers' command line argument.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a custom representation to the CommitFile class in order to
facilitate debugging.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When packaging libcamera, distributions may break IPA module signatures
if the packaging process strips binaries. This can be fixed by resigning
the modules, but the process is error-prone.
Add a command line ipa-verify utility that tests the signature on an IPA
module to help packagers. The tool takes a single argument, the path to
an IPA module shared object, and expects the signature file (.sign) to
be in the same directory.
In order to access the public key needed for signature verification, add
a static function to the IPAManager class. As the class is internal to
libcamera, this doesn't affect the public API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
libcamera creates a config.h file with predefined macros, and instructs
the compiler to include it implicitly with the -include argument.
Doxygen has no support for implicit inclusion of headers, but has a
PREDEFINED configuration option for its preprocessor that lists
predefined macros. Populate it with the values from the config_h
configuration data object that is used for generate the config.h file,
to ensure that documentation matches the configuration options libcamera
has been built with.
Bump the minimum meson version to 0.57 to use cfg_data.keys().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Recent media-ctl versions include the framerate in the fmt property output:
- entity 37: ov5693 4-0036 (1 pad, 1 link)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev6
pad0: Source
[fmt:SBGGR10_1X10/2592x1944@1/30
crop.bounds:(16,6)/2592x1944
crop:(16,6)/2592x1944]
-> "ipu3-csi2 1":0 [ENABLED]
This resulted in $sensor_size getting set to: "2592x1944@1 30", which
causes the script to fail.
Fix this by:
1. Replacing the gsub() to remove the '/' between e.g. SBGGR10_1X10
and 2592x1944 with a sub() so that only that first '/' gets replaced
(resulting in a $sensor_size of "2592x1944@1/30" instead).
2. Adding a new sub() to remove the @1/30 suffix.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that `Camera::generateConfiguration()` takes a `libcamera::Span`
of `StreamRole`, remove the `StreamRoles` type, which was an alias
to `std::vector<libcamera::StreamRole>`.
The removal has two reasons:
- it is no longer strictly necessary,
- its presence may suggest that that is the preferred (or correct)
way to build/pass a list of `StreamRole`.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[Kieran: Fix small checkstyle report on roles initialiser]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Change the parameter type of `generateConfiguration()` from `const std::vector&`
to `libcamera::Span`. A span is almost always preferable to a const vector ref
because it does not force dynamic allocation when none are needed, and it allows
any contiguous container to be used.
A new overload is added that accepts an initializer list so that
cam->generateConfiguration({ ... })
keeps working.
There is no API break since a span can be constructed from a vector
and the initializer list overload takes care of the initializer lists,
but this change causes an ABI break.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Kieran: Apply checkstyle fixups]
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Now that we identify ABI breakages, provide incremental releases which
can support backwards compatible linkage across release points that have
a compatible ABI.
Introduction of this commit does not convey that libcamera now has a
stable API, but that patch releases with a common minor number
(0.minor.patch) may potentially be used by applications without
recompilation and linkage against new releases.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Provide support to compare ABI compatibility between any two git commits
or by a commit and the most recent ancestral tag of that commit.
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
