| Age | Commit message (Collapse) | Author |
|---|
|
No source is licensed under the LGPL-2.1, we only use LGPL-2.1-or-later.
Remove the corresponding license file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add missing license texts for licenses used in the project. The license
texts have been retrieved using 'reuse download' ([1]).
[1] https://reuse.software/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
The REUSE specification [1] defines a standardized method for declaring
copyright and licensing information. Rename the licenses directory and
the files it contains to comply with the specification. No license text
is modified.
[1] https://reuse.software/spec/
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Pointed out by Coverity DefectId=297074
Signed-off-by: Umang Jain <email@uajain.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a pre-push commit hooks to prevent unintentional push of patches
containing local changelogs to the master branch.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
DRM has a format for 8-bit greyscale data, DRM_FORMAT_R8. Despite the
'R' name, which comes from GL/Vulkan to mean single-channel data, the
format maps to greyscale for display. We can thus map it to
V4L2_PIX_FMT_GREY.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Failing to convert between V4L2 and DRM 4CCs indicates something is
likely wrong, but doesn't necessarily prevent the camera from being
usable. It may for instance only limit the number of supported formats.
Downgrade the related log messages from LogError to LogWarning.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a caps() function that exposes the V4L2 capabilities for the device.
This is useful for generic code that can't hardcode any a priori
knowledge of the device, such as in a simple pipeline handler.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The doxygen \ref command is used to generate a reference to a function,
while adding parentheses after the function name is enough. Simplify the
documentation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The V4L2 subdevice API exposes ACTIVE and TRY formats, but the
V4L2Subdevice getFormat() and setFormat() operations only apply on
ACTIVE formats. Extend them to support TRY formats as well.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a utils::join() function to join elements of a container into a
string, with a separator and an optional conversion function if the
elements are not implicitly convertible to std::string.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
The IPAModuleInfo license field isn't needed anymore now that modules
are cryptographically signed. Remove it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Decide whether to isolate the IPA module using the module signature
instead of its license.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
In preparation for verifying the signature of IPA modules, generate a
public key from the private signing key and embed it in the IPAManager
class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add a new PubKey class to handle public key signature verification. The
implementation is based on the gnutls library, which is added as an
optional dependency. If gnutls is not found, signature verification will
unconditionally fail.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Load the signature from the .sign file, if available, when loading the
IPA module information and store it in the IPAModule class.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The IPAModule class passes pointers to data and the corresponding size
as thwo different variables to several functions. Tie them together in a
Span.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Use the File helper class to handle cleanup of the mapped file to
simplify error handling in loadIPAModuleInfo().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add tests for the File class API.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The File helper class is a RAII wrapper for a file to manage the file
handle and memory-mapped regions.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Add infrastructure to generate an RSA private key and sign IPA modules.
The signatures are stored in separate files with a .sign suffix.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
The isolated VIMC module isn't used in any test. Remove it to prepare
for the rework of IPA module isolation. The feature can be added back
later alongside corresponding tests if needed.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
While closed-source IPA modules will always be sandboxed, open-source
IPA modules may be run in the main libcamera process or be sandboxed,
depending on platform configuration. These two models exhibit very
different timings, which require extensive testing with both
configurations.
When run into the main libcamera process, IPA modules are executed in
the pipeline handler thread (which is currently a global CameraManager
thread). Time-consuming operations in the IPA may thus slow down the
pipeline handler and compromise real-time behaviour. At least some
pipeline handlers will thus likely spawn a thread to isolate the IPA,
leading to code duplication in pipeline handlers.
Solve both issues by always proxying IPA modules. For open-source IPA
modules that run in the libcamera process, a new IPAProxyThread class is
added to run the IPA in a separate thread.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Niklas: Move thread start/stop of thread into start()/stop()]
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Call the IPA start()/stop() functions before/after the camera is
started. This makes sure the IPA functions properly once thread
management is moved into the start/stop interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Call the IPA start()/stop() functions before/after the camera is
started. This makes sure the IPA functions properly once thread
management is moved into the start/stop interface.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
There is no need to try and process cancelled frames, try to finish as
quickly as possible.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When the camera is stopping the helper that keeps track of which buffers
are associated with a request is not cleared. Add a clear operation and
call it when the camera is stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
The IPA init() call is a no-op in the current IPA, but it's part of the
IPA API and it should be called.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
If the IPA has not filled in the parameters buffer still queue it to
hardware. Not queuing the buffer results in the pipeline and hardware
going out of sync.
This is not a permanent fix of the problem and a todo is added to fix it
properly. This change does not make the situation worse as the state of
the pipeline is just as unknown as if no param buffer is queued as if one
with old content in it.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add two new operations to the IPA interface to start and stop it. The
intention is that these functions shall be used by the IPA to perform
actions when the camera is started and stopped.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
DRM fourccs look like they have a per-plane modifier, but in fact each
of them should be same. Hence instead of passing a set of modifiers for
each fourcc in PixelFormat class, we can pass just a single modifier.
So, replace the set with a single value.
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Fix compilation error in src/libcamera/pipeline/ipu3/ipu3.cpp]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Commit 5e7c5d64a67f ("libcamera: ipu3: Do not unconditionally queue
buffers to CIO2") introduced usage of the std::queue default constructor
by using copy-list-initialization from {}. The default constructor was
explicit in C++11, which was fixed retroactively with a defect report
(http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2018/p0935r0.html).
gcc 5 and 6 are unfortunately affected, requiring explicit usage of the
constructor.
Fixes: 5e7c5d64a67f ("libcamera: ipu3: Do not unconditionally queue buffers to CIO2")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Allow the RAW buffer cycling between CIO2 and IMGU to be memory copied
to a new FrameBuffer in a new RAW stream. This allows users to capture
the raw Bayer format coming from the sensor.
As the RAW frame is memory copied queueing requests with the
StillCaptureRaw stream might impact performance.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Instead of unconditionally cycling buffers between the CIO2 and IMGU
pick a buffer when a request is queued to the pipeline. This is needed
if operations are to be applied to the buffer coming from CIO2 with
parameters coming from a Request.
The approach to pick a CIO2 buffer when a request is queued is similar
to other pipelines, where parameters and statistic buffers are picked
this way.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add the ability to set the Request a buffer is associated with. This is
needed for buffers that live inside a pipeline handler and is
temporarily associated with a request as it's being processed inside the
pipeline.
While we are at it delete a stray semicolon.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
This method may be used to memory copy a whole FrameBuffer content
from another buffer. The operation is not fast and should not be used
without great care by pipelines.
The intended use-case is to have an option to copy out RAW buffers from
the middle of a pipeline.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add Bayer format and modifiers for patch submitted for upstream
inclusion. The formats have not been accepted upstream yet but is needed
to progress with RAW capture support in libcamera.
Intention is to merge this in libcamera and update the header file the
upstream patch is picked up upstream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Add a role name 'stillraw' to request a StillCaptureRaw stream.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Add a role for capturing high resolution, low frame rate, still images
in RAW format.
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
|
|
Print fourCC characters instead of the hex value in toString() as they are
more informative. Also, write the tests for this in formats.cpp
Signed-off-by: Kaaira Gupta <kgupta@es.iitr.ac.in>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When changing the VIMC IPA source file structure the path in the
ipa_module_test which needs access to the .so file was not updated, fix
that.
The omission was hard to spot as it requires a clean build of the
project as the old .so file is still in the build tree and the test
passes.
Fixes: a25533089bda04da ("ipa: Move vimc to a subdirectory")
Signed-off-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When the validate() function adjusts the stream configuration, we print
the adjusted size for debugging purpose. Switch to printing the whole
configuration, as the pixel format may be useful too.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Add a 'pipelines' project option that specifies which pipeline handlers
to compile in. The corresponding IPA modules are automatically selected.
The default is to compile all pipeline handlers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Give a subdirectory to all IPA modules to make the structure of the
source tree more consistent. This will also simplify the implementation
of IPA module selection at build time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Give a subdirectory to all pipeline handlers to make the structure of
the source tree more consistent. This will also simplify the
implementation of pipeline handlers selection at build time.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se>
|
|
Query the viewfinder for the formats it supports natively, and select
one of them for the stream if possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Expose the pixel formats natively supported by the viewfinder, to allow
selection of stream formats that would minimize usage of software
conversion.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Print an info message when initializing the viewfinder to report if the
format converter is used or if zero-copy is enabled. This is useful to
notify of a possible impact on performances.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
Qt supports more 24-bit and 32-bit RGB formats for native painting. If
the frame buffer pixel format matches any of them, disable the converter
and create a QImage in the appropriate format.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
|
When stopping capture, display an icon instead of the last frame. This
is required to be able to release the last buffer when the viewfinder
operators in zero-copy mode.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
|
