summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-07-14libcamera: rkisp1: ipa: Rename ctrls_ to sensorCtrls_Daniel Semkowicz via libcamera-devel
As additional controls will be added to the IPA (like lens), we want to have more specific names for each ControlInfoMap. Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
2022-07-14libcamera: rkisp1: Control the lens from pipelineDaniel Semkowicz via libcamera-devel
Control lens focus from rkisp1 pipeline, using CameraLens controller and expose lens controls to the IPA during configure(). Signed-off-by: Daniel Semkowicz <dse@thaumatec.com>
2022-07-14pipeline: raspberrypi: Fix incorrect advertising of ScalerCropNaushir Patuck
The controls::ScalerCrop in the ControlInfoMap was advertised based on the ISP output Rectangle. This is incorrect, it needs to be set based on the sensor analogue crop Rectangle. Fix this. Additionally, do not use emplace to be consistent with the other controls set in the ControlInfoMap. Fixes: 9dacde0d651d (pipeline: raspberrypi: Advertise ScalerCrop from the pipeline handler) Reported-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Tested-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-14pipeline: rkisp1: Support media graph with separate CSI RXPaul Elder
The rkisp1 hardware supports both a CSI-2 input and a parallel input, where the sensor is connected directly to the ISP. On RK3399, the CSI-2 receiver is internal, but on the i.MX8MP, the CSI-2 receiver is a separate IP core, connected to the parallel input of the ISP, and gets exposed to userspace as a V4L2 subdev. To prepare for this, handle an optional CSI-2 receiver subdev in the pipeline. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org>
2022-07-13utils: ipu3-unpack: Fix error stringUmang Jain
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-13libcamera: base: Suppress clang-11 compile error on ARM32Naushir Patuck
Compiling backtrace.cpp for ARM32 produces the following error with the clang-11 (and later) compiler: -------------------- ../src/libcamera/base/backtrace.cpp:195:12: error: use of SP or PC in the list is deprecated [-Werror,-Winline-asm] int ret = unw_getcontext(&uc); ^ /usr/include/arm-linux-gnueabihf/libunwind-common.h:114:29: note: expanded from macro 'unw_getcontext' ^ /usr/include/arm-linux-gnueabihf/libunwind-arm.h:270:5: note: expanded from macro 'unw_tdep_getcontext' "stmia %[base], {r0-r15}" \ ^ <inline asm>:1:2: note: instantiated into assembly here stmia r0, {r0-r15} -------------------- Suppress this compilation error with a clang-specific pragma around the offending statements. Further information about this error can be found at https://github.com/dotnet/runtime/issues/38652 Bug: https://bugs.libcamera.org/show_bug.cgi?id=136 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@rasbperrypi.com> Tested-by: Naushir Patuck <naush@rasbperrypi.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-07meson: Correctly pass the global include to the compilerEli Schwartz
It's not safe to assume `-include config.h` works, since this depends on the functionality of the compiler that the cwd when running the compiler is searched first. When libcamera is included as a Meson subproject, the cwd of the compiler is the cwd of the main project, not of libcamera's build dir, and thus cannot be found. Instead, pass the include filename as a path based on the current build dir. Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-06utils: raspberrypi: ctt: load_image: Ignore JPEG files with no raw dataWilliam Vinnicombe
The load_image function would throw errors with JPEG or JPG files containing no raw data. Prevent throwing these errors by returning 0 if an error has occurred. Signed-off-by: William Vinnicombe <william.vinnicombe@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-07-06test: delayed_controls: Remove sequenceOffsetJacopo Mondi
Commit 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_") removed support for frame number start offset from the DelayedControls class, as it is now guaranteed that the first sequence number as it comes from the V4L2VideoDevice will always be 0. However the delayed_controls.cpp unit still has two tests that passes a non-zero first sequence number to the DelayedControl class, causing the test to spin forever and consequentially fail. Remove the two tests from the unit to fix this. The first removed test was testing the class against frame start sequence numbers greater than zero and can safely be removed. The second test was instead validating the class against sequence number overflow, which is now not possible to test anymore as the DelayedControls class now assumes 0 as first frame sequence number. Fixes: 6f539a6d2fa9 ("delayed_controls: Remove reduandant firstSequence_") Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-05libcamera: camera: Reset request sequence number on stop/startUmang Jain
We now have V4L2VideoDevice ensuring that sensor sequence numbers start from zero [1], and we desire that these should match the Request sequence number as well. [1] 1c9dc0fd89cf ("libcamera: v4l2_videodevice: Identify non-zero stream starts") Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-05delayed_controls: Remove reduandant firstSequence_Kieran Bingham
The DelayedControls implementation tracked the sequence numbers to determine the offset if a device did not commence with a sequence number of 0. This guarantee is now handled by the V4L2VideoDevice. Remove the firstSequence_ offset and the corresponding running_ flag which was used to track setting firstSequence_ from the DelayedControls. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-07-04gstreamer: Fix race conditions in task pause/resumeLaurent Pinchart
The task run function races with two other threads that want to resume the task: the requestCompleted() handler and the buffer-notify signal handler. If the former queues completed requests or the latter queues back buffers to the pool, and then resume the task, after the task run handler checks the queues but before it attemps to pause the task, then the task may be paused without noticing that more work is available. The most immediate way to fix this is to take the stream_lock in the requestCompleted() and buffer-notify signal handlers, or cover the whole task run handler with the GstLibcameraSrcState lock. This could cause long delays in the requestCompleted() handler, so that's not a good option. Instead, pause the task unconditionally at the beginning of its run function, and track while processing buffers and requests if the task needs to be resumed. It may also get resumed externally by the buffer-notify signal handler or the request completion handler, which are guaranteed not to race due to the lock taken by the gst_task_pause() and gst_task_resume() functions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
2022-07-04gstreamer: Split completed request processing to a separate functionLaurent Pinchart
Simplify the task run function futher by moving the processing of completed requests to a separate function. No functional change intended, only increased readability. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Split request creation to a separate functionLaurent Pinchart
In order to prepare for creation and queuing of multiple requests, move the request creation and queueing code to a separate function. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Fix pads lockingLaurent Pinchart
The srcpads_ vector is protected by two different locks, the GstObject lock of the libcamerasrc element, and the stream_lock that covers the run function of the thread. This isn't correct. Use the stream_lock consistently to protect the pads. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Use dedicated lock for request queuesLaurent Pinchart
Add a new lock to the GstLibcameraSrcState class to protect the queued and completed requests queues. This replaces the GstObject lock, and minimizes the lock contention between the request completion handler and the task run handler as the former must run as fast as possible. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Combine the two pad loops in the task run handlerLaurent Pinchart
This simplifies the code, and allows removing the internal queue in the GstLibcameraPad object. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Handle completed requests in the libcamerasrc taskLaurent Pinchart
Move the request wrap to a completed queue in the request completion handler to move more of the request completion processing to the libcamerasrc task. This lowers the amount of time spent in the completion handler, and prepares for reworking the usage of locks. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Rename queued requests queue to queuedRequests_Laurent Pinchart
To prepare for the addition of a completed requests queue, rename the existing queued requests queue from requests_ to queuedRequests_. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Move timestamp calculation out of pad loopLaurent Pinchart
The buffer pts and the pad latency are computed from the framebuffer timestamp, separately for each pad. Use the sensor timestamp provided through the request metadata instead, to compute the values once outside of the pads loop. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Pass Stream to RequestWrap::addBuffer()Laurent Pinchart
For symmetry with RequestWrap::removeBuffer(), pass the Stream pointer to addBuffer(). This handles streams at the GstPad level instead of the GstBuffer level, which allows making the GstLibcameraPool API a bit cleaner by removing the gst_libcamera_buffer_get_stream() helper function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Move variable to loop scopeLaurent Pinchart
The GstBuffer variable in GstLibcameraSrcState::requestCompleted() is only used within the loop scope. Make it a local loop variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-07-04gstreamer: Use gst_task_resume() when availableLaurent Pinchart
The gst_libcamera_resume_task() helper is an implementation of the gst_task_resume() function that predates its addition to GStreamer. Use gst_task_resume() when available, and rename gst_libcamera_resume_task() to gst_task_resume() to support older GStreamer versions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Vedant Paranjape <vedantparanjape160201@gmail.com>
2022-07-04libcamera: framebuffer: Turn the cookie into a 64-bit integerLaurent Pinchart
To allow associating pointers with FrameBuffer instances, turn the cookie into a 64-bit integer. This matches the Request cookie with is also a uint64_t. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2022-06-29ipa: rkisp1: Add support of Black Level Correction tuningFlorian Sylvestre
Get the Black Level Correction algorithm parameters from YAML tuning data. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Add OV5640 tuning fileFlorian Sylvestre
Add the OV5640 tuning file containing default values for 'black level correction' algorithm. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Add IMX219 tuning fileLaurent Pinchart
Add a skeleton for the IMX219 tuning file, with data for the BLC algorithm. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: rkisp1: Add YAML tuning file supportFlorian Sylvestre
Retrieve root node in YAML tuning file and provide to each algorithm this YamlObject to allow them to grab their default parameters by calling init() function. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: rkisp1: Register algorithmsLaurent Pinchart
To prepare for dynamic instantiation of algorithms from the tuning file, register the algorithms with the Module class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29pipeline: rkisp1: Support IPA tuning fileFlorian Sylvestre
Pass the path name of the YAML IPA tuning file to the IPA module. The file name is derived from the sensor name ("${sensor_name}.yaml"), with a fallback to "uncalibrated.yaml". The tuning file name can be manually overridden with the LIBCAMERA_RKISP1_TUNING_FILE environment variable. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: libipa: module: Make the Module class LoggableLaurent Pinchart
To help attribute messages logged by the Module class to a particular IPA module, make the class loggable. The logPrefix() function must be implemented by the IPA module-specific derived class. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: module: Add support for instantiation from YAMLLaurent Pinchart
Add a Module::createAlgorithms() function to instantiate algorithms from a YamlObject. The instantiated algorithms are stored in a private member variable list, exposed through the Module::algorithms() function. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: algorithm: Add init() function to the Algorithm classFlorian Sylvestre
Add the init() function that will be called during algorithm initialization to provide each algorithm the list of algorithms tuning data. Signed-off-by: Florian Sylvestre <fsylvestre@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-29ipa: libipa: algorithm: Add an algorithm registration mechanismLaurent Pinchart
In order to allow dynamic instantiation of algorithms based on tuning data files, add a mechanism to register algorithms with the IPA module. The implementation relies on an AlgorithmFactory class and a registration macro, similar to the pipeline handler registration mechanism. The main difference is that the algorithm registration and instantiation are implemented in the Module class instead of the AlgorithmFactory class, making the factory an internal implementation detail. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: Move ipa namespace documentation to module.cppLaurent Pinchart
The libipa.cpp file exists for the sole purpose of documentating the ipa namespace. As we now have a top-level module.cpp file in libipa, move the documentation there, and drop libipa.cpp. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29ipa: libipa: Introduce a Module class templateLaurent Pinchart
libipa defines an abstract Algorithm class template that is specialized by IPA modules. IPA modules then instantiate and manage algorithms internally, without help from libipa. With ongoing work on tuning data support for the RkISP1, and future similar work for the IPU3, more code duplication for algorithms management is expected. To address this and share code between multiple IPA modules, introduce a new Module class template that will define and manage top-level concepts for the IPA module. The Module class template needs to be specialized with the same types as the Algorithm class. To avoid manual specialization of both classes, store the types in the Module class, and replace the template arguments of the Algorithm class with a single Module argument from which the other types are retrieved. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
2022-06-29pipeline: raspberrypi: Advertise ScalerCrop from the pipeline handlerNaushir Patuck
The ScalerCrop control is handled directly by the pipeline handler. Remove the control from the IPA's static ControlInfoMap, and let the pipeline handler add it to the ControlInfoMap advertised to the application, ensuring the limits are set appropriately based on the current sensor mode. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Correctly report available control limitsNaushir Patuck
The ipa currently advertises a static ControlInfoMap to specify the available controls and their limits. Fix this limitation by having the IPA populate a new ControlInfoMap with updated limits for ExposureTime, AnalogueGain, and FrameDurationLimits controls based on the current sensor mode. This new ControlInfoMap is then returned back to the pipeline handler and available to the application after a successful Camera::configure() call. Before the first call to Camera::configure(), this ControlInfoMap provides some reasonable default limits for ExposureTime, AnalogueGain, and FrameDurationLimits. However, applications must not rely on these values, but obtain the correct limits after the call to Camera::configure(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29pipeline: ipa: raspberrypi: Move ControlInfoMap to the IPANaushir Patuck
Currently the pipeline handler advertises controls handled by the IPA from a static ControlInfoMap defined in the raspberrypi.h header. This change removes this header file, and instead the IPA returns the ControlInfoMap to the pipeline handler from the ipa::init() function. This is done to allow the IPA to adjust the limits of the controls based on the sensor mode in a subsequent change. Bug: https://bugs.libcamera.org/show_bug.cgi?id=83 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Use std::optional in DeviceStatusNaushir Patuck
Switch the aperture, lens_position, and flash_intensity fields in the DeviceStatus structure to use std::optional instead of using invalid default values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: imx477: Get sensor temperature from embedded dataNaushir Patuck
Fetch the sensor temperature value from the embedded data buffer and add it to the DeviceStatus structure in CamHelperImx477::PopulateMetadata(). Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29ipa: raspberrypi: Add sensor temperature to DeviceStatusNaushir Patuck
Add an optional sensor_temperature field to the DeviceStatus structure. If a temperature measurement is available for a frame, the value is returned out through the SensorTemperature control in the Request metadata. Additionally, provide the sensor temperature value from the std::ostream &operator<< overload. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-29libcamera: controls: Add SensorTemperature controlNaushir Patuck
Add a SensorTemperature control to return the temperature of the camera sensor in Celsius. This control will only be present in the Request metadata if a thermal sensor is available to the camera sensor. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-27libcamera: v4l2_videodevice: Identify non-zero stream startsKieran Bingham
V4L2 Video devices should always start streaming from index zero. Identify and report a warning if they don't, and correct for any offset. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-27README: Add some extra optional dependencies for cam sinksEric Curtin
KMS sink requires some DRM libraries, SDL sink requires some SDL libraries. Suggested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eric Curtin <ecurtin@redhat.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-23meson: options: Disable pycamera by defaultJavier Martinez Canillas
The libcamera Python bindings is still experimental and it relies on some features in pybind11 that are not yet upstreamed, so a special branch has to be downloaded as a subproject. This conflicts with the build process used by most Linux distributions, since there is expected that all the dependencies will be fulfilled by -devel packages present in the build root. To allow libcamera to be built by distros, let's disable the pycamera by default. This can still be enabled with `meson build -Dpycamera=enabled`. Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2022-06-22README: Add short testing instructions with camLaurent Pinchart
The README.rst file contains the getting started instructions, but lacks a simple way to test libcamera. Add a short section about basic cam usage. Suggested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
2022-06-22Documentation: Fix length of title underlinesLaurent Pinchart
Some title underlines don't match the title text. Fix them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-20Documentation: Use language 'en' for Sphinx 5.0.0Jacopo Mondi
Recent versions of Sphinx (> 5.0.0) have dropped support for the 'None' keyword as language specifier: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may-30-2022 10474: language does not accept None as it value. The default value of language becomes to 'en' now. Patch by Adam Turner and Takeshi KOMIYA. Causing a compile time warning: WARNING: Invalid configuration value found: 'language = None'. Update your configuration to a valid language code. Falling back to 'en' (English). Change the language setting to 'en' to silence the warning. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2022-06-20cam: kms_sink: Remove limitation that camera and display must matchEric Curtin
There is a limitation that requires input and output to be pixel for pixel identical in terms of height and width. Remove this limitation to enable more hardware that doesn't match. Just start drawing from top left 0, 0 corner. Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Eric Curtin <ecurtin@redhat.com>