summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-04pipeline: ipa: raspberrypi: Restructure the IPA mojom interfaceNaushir Patuck
Restructure the IPA mojom interface to be more consistent in the use of the API. Function parameters are now grouped into *Params structures and results are now returned in *Results structures. The following pipeline -> IPA interfaces have been removed: signalQueueRequest(libcamera.ControlList controls); signalIspPrepare(ISPConfig data); signalStatReady(uint32 bufferId, uint32 ipaContext); and replaced with: prepareIsp(PrepareParams params); processStats(ProcessParams params); signalQueueRequest() is now encompassed within prepareIsp(). The following IPA -> pipeline interfaces have been removed: runIsp(uint32 bufferId); embeddedComplete(uint32 bufferId); statsMetadataComplete(uint32 bufferId, libcamera.ControlList controls); and replaced with the following async calls: prepareIspComplete(BufferIds buffers); processStatsComplete(BufferIds buffers); metadataReady(libcamera.ControlList metadata); Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: raspberrypi: rpi_stream: Set invalid buffer to id == 0Naushir Patuck
At present, the RPiStream buffer ids == -1 indicates an invalid value. As a simplification, use id == 0 to indicate an invalid value. This allows for better code readability. As a consequence of this, use unsigned int for the buffer id values. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: ipa: raspberrypi: Refactor and move the Raspberry Pi codeNaushir Patuck
Split the Raspberry Pi pipeline handler and IPA source code into common and VC4/BCM2835 specific file structures. For the pipeline handler, the common code files now live in src/libcamera/pipeline/rpi/common/ and the VC4-specific files in src/libcamera/pipeline/rpi/vc4/. For the IPA, the common code files now live in src/ipa/rpi/{cam_helper,controller}/ and the vc4 specific files in src/ipa/rpi/vc4/. With this change, the camera tuning files are now installed under share/libcamera/ipa/rpi/vc4/. To build the pipeline and IPA, the meson configuration options have now changed from "raspberrypi" to "rpi/vc4": meson setup build -Dipas=rpi/vc4 -Dpipelines=rpi/vc4 Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04pipeline: meson: Allow nested pipeline handler directory structuresNaushir Patuck
The current pipeline handler build files require a flat directory struture for each pipeline handler. Modify the build files to remove this restriction and allow a directory structure such as: src/libcamera/pipeline/ |- raspberrypi |- common |- vc4 |- rkisp1 |- ipu3 where each subdir (e.g. raspberrypi/common, raspberrypi/vc4) has its own meson.build file. Such a directory structure will be introduced for the Raspberry Pi pipeline handler in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04ipa: meson: Allow nested IPA directory structuresNaushir Patuck
The current IPA build files require a flat directory structure for the IPAs. Modify the build files to remove this restriction and allow a directory structure such as: src/ipa |- raspberrypi |- common |- cam_helpers |- controller |- vc4 |- rkisp1 |- ipu3 where each subdir (e.g. raspberrypi/common, raspberrypi/cam_helper) has its own meson.build file. Such a directory structure will be introduced for the Raspberry Pi IPA in a future commit. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04libcamera: ipa: Remove character restriction on the IPA nameNaushir Patuck
Remove the restriction on using the '/' character in the IPA name string. This allows more flexibility in IPA directory structures where different IPA modules might live in subdirectories under the usual src/ipa/<platform>/ top level directory. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04meson: ipa: Add mapping for pipeline handler to mojom interface fileNaushir Patuck
Allow an arbitrary mapping between the pipeline handler and IPA mojom interface file in the build system. This removes the 1:1 mapping of pipeline handler name to mojom filename, and allows more flexibility to pipeline developers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-04apps: qcam: Remove redundant checkBarnabás Pőcze
The switch statement checks `roles.size()` with cases for 1 and 2, so in the `default` branch, `role.size() > 2`, i.e. it is always different from 1, so the check is unnecessary. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
2023-05-03libcamera: pipeline: simple: Add support for ST's DCMIPPDaniel Scally
The STM32 contains a camera pipeline known as the DCMIPP (Digital Camera-Memory Interface Pixel Processor) which receives data from a parallel interface and dumps the post-processed data to memory. The pipeline is capable of some processing in the form of downscaling captured data through cropping or skipping the sensor's output. The simple pipeline handler is quite capable of handling the DCMIPP given its operation is handled entirely through configuring the pads of a media graph, so add support for the driver to the pipeline's supportedDevices array. Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-05-01libcamera v0.0.5Kieran Bingham
Bugfixes: - meson: Ignore -Wredundant-move with gcc-13 and newer - cam: file_sink: Workaround gcc-13 dangling-reference false positive - libcamera: Open files with O_CLOEXEC - meson: Fix git version parsing - libcamera: camera_manager: Stop exponential explosive calls to createPipelineHandlers - py: cam: Fix demosaic overflow issue - libcamera: base: Make the registration of log categories atomic Core: - test: controls: control_info_map: Test default constructor - controls: guard ControlInfoMap against nullptr idmap_ - device_enumerator_udev: Use std::string_view - formats: Add 14-bits Bayer RAW formats - device_enumerator_udev: Remove devnum from dependency map - meson: libcamera: Report IPA signature method - meson: Align handling of build metadata - converter: Check converter validity - Keep using syslog for isolated IPA modules - utils: ipc: Update parser.py - utils: checkstyle.py: Don't run commit title checker on staged commits - framebuffer: Allow inheritance of FrameBuffer - Remove transform from V4L2SubdeviceFormat - libcamera: camera_sensor: Add tryFormat() - camera_sensor: Fix typo in comment - camera_sensor: Demote flip support message to Debug - internal: tracepoints: Use correct include directive - libcamera: camera: Ensure queued requests are invalid ipa: - doc: Clarify IPA acronym in its namespace description - rkisp1: Add tuning files for PinephonePro sensors - rkisp1: Add tuning files for Google DRU "Scarlet" sensors - rkisp1: lsc: Fix integer division error - libipa: Add OV2685 Camera Sensor Helper - libipa: Add OV5647 Camera Sensor Helper - raspberrypi: agc: Add "shadows" constraint mode - raspberrypi: generalise algorithms - raspberrypi: Fix default frame durations calculation - raspberrypi: Ensure shutter speed and gain are clipped in the AGC - raspberrypi: Use the new sensor limits fields in CameraMode - raspberrypi: Add sensor mode limits to CameraMode - raspberrypi: Fix crash under LTO - raspberrypi: imx296: Minor tuning updates - raspberrypi: agc: Fix overflow in Y value calculation - raspberrypi: Better heuristics for calculating Unicam timeout - raspberrypi: Generalise statistics - raspberrypi: Change Unicam timeout handling pipeline: - simple: Validate transform - imx8-isi: Remove mbusCode from formatsMap_ - imx8-isi: Automatically select media bus code - imx8-isi: Split Bayer/YUV config generation - imx8-isi: Break out RAW/YUV format selection - raspberrypi: Iterate over all Unicam instances in match() - raspberrypi: Add a Unicam timeout override config options - raspberrypi: Always use ColorSpace::Raw for raw streams - raspberrypi: Drop unused code - ipu3: Drop unused code apps: - cam: kms_sink: Drop unique_ptr<> from DRM::AtomicRequest - cam Return std::optional<> from StreamKeyValueParser::parseRole() - android: jpeg: Add JEA implementation ABI Compliance: * abi-compliance-checker reports 98.6% ABI and 100% API compatibility with with v0.0.4 Total binary compatibility problems: 1, warnings: 1 Total source compatibility problems: 0, warnings: 0 - First virtual method ~__dt ( ) has been added to this class. 1) The layout of type structure has been shifted by 8 bytes by the added v-table pointer. 2) Size of class has been increased by 8 bytes. affected symbols: 6 (1.4%) FrameBuffer::releaseFence ( ) FrameBuffer::setCookie ( uint64_t cookie ) FrameBuffer::cookie ( ) FrameBuffer::planes ( ) FrameBuffer::request ( ) FrameBuffer::metadata ( ) This ABI breakage was introduced by: 4843bfa66dc1 ("libcamera: framebuffer: Allow inheritance of FrameBuffer") Acked-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01cam: file_sink: Workaround gcc-13 dangling-reference false positiveEric Curtin
A new warning has been introduced to gcc-13 that produces a false positive on the cam file sink object: src/cam/file_sink.cpp:92:45: error: possibly dangling reference to a temporary [-Werror=dangling-reference] 92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i]; | ^~~~ src/cam/file_sink.cpp:92:81: note: the temporary was destroyed at the end of the full expression '(& buffer->libcamera::FrameBuffer::metadata())->libcamera::FrameMetadata::planes().libcamera::Span<const libcamera::FrameMetadata::Plane>::operator[](i)' 92 | const FrameMetadata::Plane &meta = buffer->metadata().planes()[i]; | ^ cc1plus: all warnings being treated as errors Workaround this issue by refactoring the code to take a local const copy of the bytesused value, rather than a local const reference to the plane. Bug: https://bugs.libcamera.org/show_bug.cgi?id=185 Bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107532 Co-developed-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Eric Curtin <ecurtin@redhat.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> [Kieran: Commit and comment reworded prior to merge] Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01meson: Ignore -Wredundant-move with gcc-13 and newerLaurent Pinchart
Starting from 13.1, gcc implements the C++23 version of automatic move from local variables in return statements (see https://en.cppreference.com/w/cpp/language/return). As a result, some previously required explicit `std::move()` in return statements generate warnings. This is the case when a function returns an object whose type is a class derived from the class type the function returns: struct U { }; struct T : U { }; U f() { T t; return t; } Up to C++20, the automatic move from local variables selects the move constructor of class U, which is not the move constructor of the expression. Overload resolution is then performed a second time, with t considered as an lvalue. An explicit `std::move(t)` is needed in the return statement to select the U move constructor. Starting from C++23, `t` is treated as an xvalue, and the U move constructor is selected without the need for an explicit `std::move(t)`. An explicit `std:move()` then generates a redundant-move warning, as in the valueOrTuple() function in src/py/libcamera/py_helpers.cpp. Omitting the `std::move()` silences the warning, but selects the copy constructor of U with older gcc versions and with clang, which negatively impacts performance. The easiest fix is to disable the warning. With -Wpessimizing-move enabled, the compiler will still warn of pessimizing moves, only the redundant but not pessimizing moves will be ignored. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01ipa: rkisp1: Add tuning files for PinephonePro sensorsJacopo Mondi
Add to the RkISP1 data configuration files for the imx258 and ov8858 sensors found on Pine64 PinephonePro devices. The tuning file contain LSC tables extracted from the Rockchip Android BSP the PinephonePro ships with. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01ipa: rkisp1: Add tuning files for Google DRU "Scarlet" sensorsJacopo Mondi
Add to the RkISP1 data configuration files for the ov2685 and ov5695 sensor found on Google DRU "Scarlett" tablet. The tuning files contain LSC tables extracted from the Google Chrome Android HAL configuration files, available at src/overlays/overlay-scarlet/media-libs/cros-camera-hal-configs-scarlet/files/IQ/ at revision "stabilize-14790.B". Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-05-01pipeline: simple: Validate transformRobert Mader
Just like we do for other pipeline handlers already. This ensures we corretly pass on transforms that are not handled by the sensor - e.g. rotations - back to the app via the config, which is required on devices like the Pinephone. Signed-off-by: Robert Mader <robert.mader@collabora.com> Tested-by: Arnav Singh <me@arnavion.dev> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Remove mbusCode from formatsMap_Jacopo Mondi
Now that the media bus code selection procedure does not depend on the ISICameraConfiguration::formatsMap_ remove the association between PixelFormat supported by the ISI and the media bus code produced by the sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Split Bayer/YUV config generationJacopo Mondi
At generateConfiguration() a YUV/RGB pixel format is preferred for the StillCapture/VideoRecording/Viewfinder roles, but currently there are no guarantees in place that the sensor provides a non-Bayer bus format from which YUV/RGB can be generated. This makes the default configuration generated for those roles not to work if the sensor is a RAW-only one. To improve the situation split the configuration generation in two, one for YUV modes and one for Raw Bayer mode. StreamRoles assigned to a YUV mode will try to first generate a YUV configuration and then fallback to RAW if that's what the sensor can provide. As an additional requirement, for YUV streams, the generated mode has to be validated with the sensor to confirm the desired sizes can be generated as the ISI cannot up-scale. In order to test a format use the newly introduced CameraSensor::tryFormat(). Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
2023-04-30libcamera: camera_sensor: Add tryFormat()Jacopo Mondi
Add a function to the CameraSensor class that allows to test a format without applying it to the subdevice and without modifying any control value associated with the camera sensor. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Automatically select media bus codeJacopo Mondi
The ISICameraConfiguration::validate() function selects which media bus format to configure the sensor with based on the pixel format of the first configured stream using the media bus code associated to it in the formatsMap_ map. In order to remove the PixelFormamt-to-mbus-code association in formatsMap_ provide a wrapper function for the newly introduced getRawMediaBusFormat() and getYuvMediaBusFormat() that automatically selects what media bus format to use based on the first stream pixel format. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Break out YUV format selectionJacopo Mondi
As per the RAW format selection, the media bus format selection procedure relies on the direct association of PixelFormat and media bus code in the formatsMap_ map. As the ISI can generate YUV and RGB formats from any non-Bayer media bus format, break out the YUV/RGB media bus format selection to a separate function. The newly introduced getYuvMediaBusFormat() tests a list of known-supported media bus formats against the list of media bus formats supported by the sensor and tries to prefer media bus codes with the same encoding as the requested PixelFormat. Use the newly introduced function in ISICameraConfiguration::validateYuv() to make sure the sensor can produce a YUV/RGB media bus format. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-30libcamera: imx8-isi: Break out RAW format selectionJacopo Mondi
The current implementation of the ISI pipeline handler handles translation of PixelFormat to media bus formats from the sensor through a centralized map. As the criteria to select the correct media bus code depends on if the output PixelFormat is a RAW Bayer format or not, start by splitting the RAW media bus code procedure selection out by adding a function for such purpose to the ISICameraData class. Add the function to the ISICameraData and not to the ISICameraConfiguration because: - The sensor is a property of CameraData - The same function will be re-used by the ISIPipelineHandler during CameraConfiguration generation. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Tested-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-28Documentation: guides: pipeline-handler: Fix spelling errorBarnabás Pőcze
Both {Camera,PipelineHandler}::generateConfiguration() take a list of `StreamRole` objects, and not a list of `StreamRoles` objects. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-26apps: cam: kms_sink: Drop unique_ptr<> from DRM::AtomicRequestUmang Jain
There is no need to wrap DRM::AtomicRequest in std::unique_ptr<> in KMSSink::start(). Remove it so that the syntax becomes similar to what we have in KMSSink::stop(). No functional changes intended. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-20test: controls: control_info_map: Test default constructorMattijs Korpershoek
ControlInfoMap can be default-constructed. In that case, some of its members (like idmap_) can be a nullptr, and ControlInfoMap.find() will segfault. Add a test with a default constructed ControlInfoMap to cover this. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-04-20libcamera: controls: guard ControlInfoMap against nullptr idmap_Mattijs Korpershoek
It's possible to construct a Camera with an unsafe controlInfo_. This is the case in the Simple pipeline, where the camera controls are not populated. With Simple, if we attempt to set a Control, we end up with a segfault because the default constructor for ControlInfoMap doesn't intialized idmap_ which is initialized at class declaration time as const ControlIdMap *idmap_ = nullptr; Add some safeguards in ControlInfoMap to handle this case. Link: https://lists.libcamera.org/pipermail/libcamera-devel/2023-April/037439.html Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-04-19libcamera: device_enumerator_udev: Use std::string_viewBarnabás Pőcze
In `udevNotify()`, constructing an std::string from the device's associated action is unnecessary as it is only compared against static strings, and for that purpose an std::string_view works just as well, while being cheaper to construct. In the same vein, an std::string_view can be used to store the device's devnode initially, and the string construction can be deferred until it is needed. Furthermore, previously `udev_device_get_devnode()` was called twice. The extra call is now removed. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-18libcamera: formats: Add 14-bits Bayer RAW formatsJacopo Mondi
Add formats definition and mappings for 14-bits Bayer RAW formats. Add definitions for non-packed and CSI-2 packed variants. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
2023-04-18libcamera: device_enumerator_udev: Remove devnum from dependency mapBarnabás Pőcze
Previously, after `addV4L2Device()` had seen all dependecies, it would remove the `MediaDeviceDeps` object from the `pending_` list, which would result in it being destroyed. However, there would still be (dangling) pointers to this object in `devMap_` that were added in `addUdevDevice()` (line 103). So remove the entry with the given devnum when it is removed from the corresponding `MediaDeviceDeps` object. Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-12ipa: raspberrypi: agc: Add "shadows" constraint modeDavid Plowman
The "shadows" constraint mode actually exists in a number of tuning files, but had been omitted from the list of supported modes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-05utils: ipc: Update parser.pyHarvey Yang
Make the local mojom library the first priority in the sys path, to avoid mixing the local one with the system one in build. Tested on chromebook soraka-libcamera. Signed-off-by: Harvey Yang <chenghaoyang@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-05doc: ipa: Clarify IPA acronym in its namespace descriptionGabby George
Clarify IPA's acronym by specifying what "IPA" stands for as part of the ipa namespaces' "brief" doxygen-generated description. This allows visitors to the docs to immediately have an idea of the purpose of the IPA namespace at a glance. Because of the prevalence and importance of the IPA namespace and functionality, the fact that it stands for "Image Processing Algorithm" should be accessible to even casual perusers of the docs. Signed-off-by: Gabby George <gabbymg94@gmail.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-04-05libcamera: Open files with O_CLOEXECLaurent Pinchart
Files opened internally in libcamera without the O_CLOEXEC file will remain open upon a call to one of the exec(3) functions. As exec() doesn't destroy local or global objects, this can lead to various side effects. Avoid this by opening file descriptors with O_CLOEXEC for all internal files. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-04-05meson: Really fix git version parsingLaurent Pinchart
The previous attempt to fix git version parsing in commit d34cefad1791 ("meson: Fix git version parsing") was too naive, and didn't take into account cases where the libcamera git version contains no or multiple '+' signs. Fixing this is more complex than a one-liner change, as meson doesn't support Python-style slicing of arrays or a length method on strings. The simplest and most versatile option is to patch the version string in the gen-version.sh script. Do so, and clarify the comments related to version handling in meson.build. Fixes: d34cefad1791 ("meson: Fix git version parsing") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the focus reporting codeNaushir Patuck
Use the generalised focus statistics structure to compute the centre window focus FoM value. This avoids needed to hard-code a specific grid size. Remove the focus reporting algorithm as the functionality is duplicated by this bit of IPA code. Remove focus_status.h as it is no longer needed. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the autofocus algorithmNick Hollinghurst
Remove any hard-coded assumptions about the target hardware platform from the autofocus algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. Additionally, PDAF statistics are represented by a generalised region statistics structure to be device agnostic. These changes also require the autofocus algorithm to initialise region weights on the first frame's prepare()/process() call rather than during initialisation. Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com> Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Tested-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the agc algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the AGC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. This change replaces all hard-coded arrays with equivalent std::vector types. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Make RegionStats::get() always return a Region structNaushir Patuck
Update the overloaded RegionStats::get() and RegionStats::getFloating() member functions to return a Region struct for consistency. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the contrast algorithmNaushir Patuck
Generalise the contrast algorithm code by removing any hard-coded assumptions about the target hardware platform. Instead, the algorithm code creates a generic Pwl that gets returned to the IPA, where it gets converted to the bcm2835 hardware specific lookup table. As a drive-by, remove an unused mutex. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: alsc: Use a better type name for sparse arraysDavid Plowman
The algorithm uses the data type std::vector<std::array<double, 4>> to represent the large sparse matrices that are XY (X, Y being the ALSC grid size) high but with only 4 non-zero elements on each row. Replace this slightly long type name by SparseArray<double>. No functional changes. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: alsc: Replace std::vectors by Array2D classDavid Plowman
The Array2D class is a very thin wrapper round std::vector that can be used almost identically in the code, but it carries its 2D size with it so that we aren't passing it around all the time. All the std::vectors that were X * Y in size (X and Y being the ALSC grid size) have been replaced. The sparse matrices that are XY * 4 in size have not been as they are somewhat different, are used differently, require more code changes, and actually make things more confusing if everything looks like an Array2D but are not the same. There should be no change in algorithm behaviour at all. Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Generalise the ALSC algorithmNaushir Patuck
Remove any hard-coded assumptions about the target hardware platform from the ALSC algorithm. Instead, use the "target" string provided by the camera tuning config and generalised statistics structures to determing parameters such as grid and region sizes. The ALSC calculations use run-time allocated arrays/vectors on every frame. Allocating these might add a non-trivial run-time penalty. Replace these dynamic allocations with a set of reusable pre-allocated vectors during the init phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Signed-off-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi: Add hardware configuration to the controllerNaushir Patuck
Add a new Controller::HardwareConfig structure that captures the hardware statistics grid/histogram sizes and pipeline widths. This ensures there is a single centralised places for these parameters. Add a getHardwareConfig() helper function to retrieve these values for a given hardware target. Update the statistics populating routine in the IPA to use the values from this structure instead of the hardcoded numbers. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-31ipa: raspberrypi Store the target string in the controllerNaushir Patuck
The target string may be used by algorithms to determine the running hardware target. Store the target string provided by the camera tuning files in the controller state. Add a getTarget() member function to retrieve this string. Validate the correct hardware target ("bcm2835") during the IPA initialisation phase. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Fix default frame durations calculationNaushir Patuck
Fix a bug in the default frame durations calculation where the min/max values are swapped round. This is a rarely travelled code path, so has not actually caused a reported failure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Ensure shutter speed and gain are clipped in the AGCNaushir Patuck
Make a copy of the CameraMode structure on a switch mode call. This replaces the existing lastSensitivity_ field. Limit the AGC gain calculations to the minimum value given by the CameraMode structure. The maximum value remains unclipped as any gain over the sensor maximum will be made up by digital gain. Rename clipShutter to limitShutter for consistency, and have the latter limit the shutter speed to both upper and lower bounds. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Use the new sensor limits fields in CameraModeNaushir Patuck
Use the new analogue gain and shutter speed limit fields in the ipa code when reporting back the control value limits and calculating the analogue gain code to use. This also replaces the now unused (and removed) maxSensorGainCode_ field. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-28ipa: raspberrypi: Add sensor mode limits to CameraModeNaushir Patuck
Add fields in the CameraMode structure to capture the mode specific limits for analogue gain and shutter speed. For convenience, also add fields for minimum and maximum frame durations. Populate these new fields when setting up the CameraMode structure. Signed-off-by: Naushir Patuck <naush@raspberrypi.com> Reviewed-by: David Plowman <david.plowman@raspberrypi.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-26libcamera: v4l2_device: openat(2) with O_CLOEXEC to cleanup after exec(3)Elias Naur
When an executable using libcamera calls exec(3) while a camera is in use, file descriptors corresponding to the V4L2 video devices are kept open has they have been created without O_CLOEXEC. This results in the video devices staying busy, preventing the new executable from using them: [91] ERROR V4L2 v4l2_videodevice.cpp:1047 /dev/video0[149:cap]: Unableto set format: Resource busy Fix this by opening video devices with O_CLOEXEC, which is generally a good idea in libraries. Signed-off-by: Elias Naur <mail@eliasnaur.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2023-03-21libcamera: camera: Ensure queued requests are invalidKieran Bingham
Invalid, or not correctly reset requests can cause undefined behaviour in the pipeline handlers due to unexpected request state. If the status has not been reset to Request::RequestPending, it is either not new, or has not been correctly procesed through Request::reuse(). This can be caught early by validating the status of the request when it is queued to a camera. Reject invalid requests before processing them in the pipeline handlers. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2023-03-21meson: libcamera: Report IPA signature methodKieran Bingham
Use the Configuration section to report which dependency is used to handle IPA module signatures. In the event that it is not found, report directly in the configuration that modules are Isolated. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>